Skip to contentSkip to conversation

Failed to connect: org.bluez.Error.NotReady

DISCUSSION Brian J. Murrell 4 participants 11 messages Dec 13, 2013 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

So I was happily chugging along using bluez5 on F20 with the previously mentioned mouse and all of a sudden it stopped working. So to bluetoothctl I go:

$ bluetoothctl 
[NEW] Controller 00:02:72:1E:E0:12 pc.interlinx.bc.ca-0 [default]
[NEW] Device 00:0D:E6:68:B4:6F Samsung WEP850
[NEW] Device 70:F3:95:3E:92:34 brian-laptop
[NEW] Device 7C:1E:52:6E:59:D2 Microsoft Sculpt Touch Mouse
[bluetooth]# info 7C:1E:52:6E:59:D2
Device 7C:1E:52:6E:59:D2
	Name: Microsoft Sculpt Touch Mouse
	Alias: Microsoft Sculpt Touch Mouse
	Class: 0x000580
	Icon: input-mouse
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: no
	LegacyPairing: no
	UUID: Service Discovery Serve.. (00001000-0000-1000-8000-00805f9b34fb)
	UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v045Ep077Cd011E
[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady

I've tried unplugging and plugging in the dongle. Not sure what else to do at this point.

Any ideas?

Cheers,
b.

#1 lore raw
Quoted 28 lines · Brian J. Murrell

So I was happily chugging along using bluez5 on F20 with the previously mentioned mouse and all of a sudden it stopped working. So to bluetoothctl I go:

$ bluetoothctl 
[NEW] Controller 00:02:72:1E:E0:12 pc.interlinx.bc.ca-0 [default]
[NEW] Device 00:0D:E6:68:B4:6F Samsung WEP850
[NEW] Device 70:F3:95:3E:92:34 brian-laptop
[NEW] Device 7C:1E:52:6E:59:D2 Microsoft Sculpt Touch Mouse
[bluetooth]# info 7C:1E:52:6E:59:D2
Device 7C:1E:52:6E:59:D2
	Name: Microsoft Sculpt Touch Mouse
	Alias: Microsoft Sculpt Touch Mouse
	Class: 0x000580
	Icon: input-mouse
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: no
	LegacyPairing: no
	UUID: Service Discovery Serve.. (00001000-0000-1000-8000-00805f9b34fb)
	UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v045Ep077Cd011E
[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady
Quoted 2 lines

I've tried unplugging and plugging in the dongle. Not sure what else to do at this point.

Looks like the mouse doesn't accept to be connected through remotely. Turning it off an on should make it connect back to the machine (that's how it behaves with the MS Wireless presenter mouse).

Cheers

#2 lore raw
Quoted 1 line · Bastien Nocera

Looks like the mouse doesn't accept to be connected through remotely.

But why would it (a) all of a sudden become disconnected while I was using it and (b) a problem today, after having been using this mouse successfully for a few days now, including have it reconnect after being idle for long periods of time (i.e. overnight)?

Quoted 1 line

Turning it off an on should make it connect back to the machine

Unfortunately not. After turning it off and then on again, still no connection and none possible:

# info 7C:1E:52:6E:59:D2
Device 7C:1E:52:6E:59:D2
	Name: Microsoft Sculpt Touch Mouse
	Alias: Microsoft Sculpt Touch Mouse
	Class: 0x000580
	Icon: input-mouse
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: no
	LegacyPairing: no
	UUID: Service Discovery Serve.. (00001000-0000-1000-8000-00805f9b34fb)
	UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v045Ep077Cd011E
[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady

I have this same problem with my previously paired headset also. Not connected and won't connect.

Cheers,
b.

#3 lore raw

Hi Brian,

Quoted 32 lines · Bastien Nocera
Quoted 1 line

Looks like the mouse doesn't accept to be connected through remotely.

But why would it (a) all of a sudden become disconnected while I was using it and (b) a problem today, after having been using this mouse successfully for a few days now, including have it reconnect after being idle for long periods of time (i.e. overnight)?

Quoted 1 line

Turning it off an on should make it connect back to the machine

Unfortunately not. After turning it off and then on again, still no connection and none possible:

# info 7C:1E:52:6E:59:D2
Device 7C:1E:52:6E:59:D2
	Name: Microsoft Sculpt Touch Mouse
	Alias: Microsoft Sculpt Touch Mouse
	Class: 0x000580
	Icon: input-mouse
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: no
	LegacyPairing: no
	UUID: Service Discovery Serve.. (00001000-0000-1000-8000-00805f9b34fb)
	UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v045Ep077Cd011E
[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady
Quoted 2 lines

I have this same problem with my previously paired headset also. Not connected and won't connect.

Is your adapter powered?:)

Signature · 2 lines
BR
Szymon Janc
#4 lore raw

Hi,

Quoted 8 lines · Szymon Janc
Quoted 6 lines

[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady

I have this same problem with my previously paired headset also. Not connected and won't connect.

Is your adapter powered?:)

I agree it looks like it's missing "power on" command on bluetoothctl here (assuming there is no UI applet running that should take care of powering it up automatically.)

Best Regards,

Signature · 3 lines
Anderson Lizardo
Instituto Nokia de Tecnologia - INdT
Manaus - Brazil
#5 lore raw
Quoted 7 lines · Anderson Lizardo

Hi,

Quoted 4 lines · Szymon Janc
Quoted 4 lines

[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

I have this same problem with my previously paired headset also. Not connected and won't connect.

Is your adapter powered?:)

I agree it looks like it's missing "power on" command on bluetoothctl here

Hrm.

[bluetooth]# power on
[CHG] Controller 00:02:72:1E:E0:12 Class: 0x0c0104 Changing power on succeeded
[CHG] Controller 00:02:72:1E:E0:12 Powered: yes [CHG] Device 7C:1E:52:6E:59:D2 Connected: yes

And now the mouse works. I wonder what happened in the first place to make it stop running. Certainly the unplugging/plugging in of the dongle might have been enough to need it powering on so it's not clear that it just spontaneously lost power or anything like that.

Quoted 2 lines

(assuming there is no UI applet running that should take care of powering it up automatically.)

Which is an interesting point. What is the UI applet for all of this supposed to be now in F20?

b.

#6 lore raw

On Fri, 2013-12-13 at 11:22 -0500, Brian J. Murrell wrote:
<snip>

Quoted 5 lines
Quoted 2 lines

(assuming there is no UI applet running that should take care of powering it up automatically.)

Which is an interesting point. What is the UI applet for all of this supposed to be now in F20?

There's no "applet" in GNOME 3.10. Launch the Settings -> Bluetooth and turn Bluetooth on there, in the titlebar.

#7 lore raw
In reply to Brian J. Murrell

Hi Brian,

Quoted 10 lines · Brian J. Murrell

[bluetooth]# power on
[CHG] Controller 00:02:72:1E:E0:12 Class: 0x0c0104 Changing power on succeeded
[CHG] Controller 00:02:72:1E:E0:12 Powered: yes [CHG] Device 7C:1E:52:6E:59:D2 Connected: yes

And now the mouse works. I wonder what happened in the first place to make it stop running. Certainly the unplugging/plugging in of the dongle might have been enough to need it powering on so it's not clear that it just spontaneously lost power or anything like that.

Since BlueZ 5, the adapter power state (on/off) is not saved anymore by bluetoothd (on BlueZ 4, there were InitiallyPowered/RememberPowered options in main.conf that took care of powering up adapters; these options are gone in BlueZ 5). There should be an external component that takes care of powering up the adapter after it is attached.

Quoted 6 lines
Quoted 3 lines

(assuming there is no UI applet running that should take care of powering it up automatically.)

Which is an interesting point. What is the UI applet for all of this supposed to be now in F20?

As Bastien mentioned, it is built-in for GNOME. I don't use GNOME, but in theory, once you enable Bluetooth on its settings, the adapter will be powered on once it is attached.

Best Regards,

Signature · 3 lines
Anderson Lizardo
Instituto Nokia de Tecnologia - INdT
Manaus - Brazil
#8 lore raw
Quoted 1 line · Anderson Lizardo

Hi Brian,

Hi Anderson,

Quoted 5 lines

Since BlueZ 5, the adapter power state (on/off) is not saved anymore by bluetoothd (on BlueZ 4, there were InitiallyPowered/RememberPowered options in main.conf that took care of powering up adapters; these options are gone in BlueZ 5). There should be an external component that takes care of powering up the adapter after it is attached.

Interesting. I wonder if F20 itself is supposed to be doing this or if it's expecting the desktop (i.e. via applet or whatever) to do it.

Quoted 1 line

As Bastien mentioned, it is built-in for GNOME.

Ahh.

Quoted 1 line

I don't use GNOME,

Me either. I use MATE. GNOME[3] is incapable of handling my video configuration. GNOME2 and thus MATE handles it just fine, FWIW.

Quoted 3 lines

but
in theory, once you enable Bluetooth on its settings, the adapter will be powered on once it is attached.

So, it seems that F20 *is* expecting the desktop model to handle that.

I wonder what the model is supposed to be for the likes of MATE. I'm not at all convinced that the MATE that's in F20 has been bluetooth-enabled to handle this.

Cheers,
b.

#9 lore raw
In reply to Brian J. Murrell
Quoted 32 lines · Brian J. Murrell
Quoted 1 line · Bastien Nocera

Looks like the mouse doesn't accept to be connected through remotely.

But why would it (a) all of a sudden become disconnected while I was using it and (b) a problem today, after having been using this mouse successfully for a few days now, including have it reconnect after being idle for long periods of time (i.e. overnight)?

Quoted 1 line

Turning it off an on should make it connect back to the machine

Unfortunately not. After turning it off and then on again, still no connection and none possible:

# info 7C:1E:52:6E:59:D2
Device 7C:1E:52:6E:59:D2
	Name: Microsoft Sculpt Touch Mouse
	Alias: Microsoft Sculpt Touch Mouse
	Class: 0x000580
	Icon: input-mouse
	Paired: yes
	Trusted: yes
	Blocked: no
	Connected: no
	LegacyPairing: no
	UUID: Service Discovery Serve.. (00001000-0000-1000-8000-00805f9b34fb)
	UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v045Ep077Cd011E
[bluetooth]# connect 7C:1E:52:6E:59:D2
Attempting to connect to 7C:1E:52:6E:59:D2
Failed to connect: org.bluez.Error.NotReady
Quoted 2 lines

I have this same problem with my previously paired headset also. Not connected and won't connect.

Then use btmon to gather some debug information, or even use "journalctl -b | grep bluetooth" to see if there's more debug output from the daemon.

The mouse should be trying to reconnect, no idea why it wouldn't be able to...

#10 lore raw
Quoted 2 lines · Bastien Nocera

Then use btmon

It doesn't report anything:

= New Index: 00:02:72:1E:E0:12 (BR/EDR,USB,hci0) [hci0] 0.981520

That's it. I tried turning the mouse off and on while running that. Headset too.

Quoted 2 lines

to gather some debug information, or even use "journalctl
-b | grep bluetooth"

Dec 11 11:51:57 pc.interlinx.bc.ca bluetoothd[1405]: Bluetooth daemon 5.11
Dec 11 11:51:57 pc.interlinx.bc.ca bluetoothd[1405]: Starting SDP server
Dec 11 11:51:57 pc.interlinx.bc.ca bluetoothd[1405]: Bluetooth management interface 1.3 initialized
Dec 11 11:52:36 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.40 path=/MediaEndpoint/A2DPSource
Dec 11 11:52:36 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.40 path=/MediaEndpoint/A2DPSink
Dec 11 15:06:51 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.40 path=/MediaEndpoint/A2DPSource
Dec 11 15:06:51 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.40 path=/MediaEndpoint/A2DPSink
Dec 11 15:06:51 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:51 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:51 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:51 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:51 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:51 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:52 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:06:52 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.40" (uid=1001 pid=1962 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.14" (uid=0 pid=1405 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 11 15:07:05 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.40 path=/MediaEndpoint/A2DPSource
Dec 11 15:07:05 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.40 path=/MediaEndpoint/A2DPSink
Dec 11 15:07:07 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 11 15:07:07 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 11 15:11:06 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input15
Dec 11 15:11:07 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 11 18:51:38 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input16
Dec 11 18:51:40 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 12 05:49:53 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input17
Dec 12 05:49:55 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 12 06:44:22 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 12 06:44:25 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input18
Dec 12 11:23:37 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input19
Dec 12 11:23:42 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 12 13:53:30 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input20
Dec 12 13:53:32 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 12 15:32:47 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input21
Dec 12 15:32:49 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 13 05:46:01 pc.interlinx.bc.ca kernel: input: Microsoft Sculpt Touch Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1.3/2-1.3:1.0/bluetooth/hci0/hci0:11/input22
Dec 13 05:46:02 pc.interlinx.bc.ca bluetoothd[1405]: No supported peripheral found
Dec 13 10:00:19 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.40 path=/MediaEndpoint/A2DPSource
Dec 13 10:00:19 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.40 path=/MediaEndpoint/A2DPSink
Dec 13 10:01:00 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:01:00 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:16:57 pc.interlinx.bc.ca bluetoothd[1405]: Terminating
Dec 13 10:16:59 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:16:59 pc.interlinx.bc.ca bluetoothd[1405]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:16:59 pc.interlinx.bc.ca bluetoothd[1405]: Stopping SDP server
Dec 13 10:16:59 pc.interlinx.bc.ca bluetoothd[1405]: Exit
Dec 13 10:17:01 pc.interlinx.bc.ca bluetoothd[27809]: Bluetooth daemon 5.12
Dec 13 10:17:02 pc.interlinx.bc.ca bluetoothd[27809]: Starting SDP server
Dec 13 10:17:02 pc.interlinx.bc.ca bluetoothd[27809]: Bluetooth management interface 1.3 initialized
Dec 13 10:17:05 pc.interlinx.bc.ca bluetoothd[27809]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:17:05 pc.interlinx.bc.ca bluetoothd[27809]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:21:11 pc.interlinx.bc.ca sudo[28307]: brian : TTY=pts/1 ; PWD=/home/brian ; USER=root ; COMMAND=/sbin/service bluetooth restart
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[27809]: Terminating
Dec 13 10:21:12 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[27809]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[27809]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:21:12 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:12 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:12 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[27809]: Stopping SDP server
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[27809]: Exit
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[28339]: Bluetooth daemon 5.12
Dec 13 10:21:12 pc.interlinx.bc.ca bluetoothd[28339]: Starting SDP server
Dec 13 10:21:13 pc.interlinx.bc.ca bluetoothd[28339]: Bluetooth management interface 1.3 initialized
Dec 13 10:21:13 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:21:13 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:21:14 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:14 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:14 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:21:14 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.256" (uid=0 pid=27809 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:24:03 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint unregistered: sender=:1.243 path=/MediaEndpoint/A2DPSink
Dec 13 10:24:03 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca dbus-daemon[1232]: dbus[1232]: [system] Rejected send message, 4 matched rules; type="error", sender=":1.243" (uid=1001 pid=24392 comm="/usr/bin/pulseaudio --start --log-target=syslog ") interface="(unset)" member="(unset)" error name="org.bluez.MediaEndpoint1.Error.NotImplemented" requested_reply="0" destination=":1.261" (uid=0 pid=28339 comm="/usr/libexec/bluetooth/bluetoothd ")
Dec 13 10:24:03 pc.interlinx.bc.ca systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Dec 13 10:24:13 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSource
Dec 13 10:24:13 pc.interlinx.bc.ca bluetoothd[28339]: Endpoint registered: sender=:1.243 path=/MediaEndpoint/A2DPSink

Earlier today I did a "service bluetooth restart" as well as unplugging/plugging the dongle, so those are probably reflected in there.

Quoted 5 lines

to see if there's more debug output from the
daemon.

The mouse should be trying to reconnect, no idea why it wouldn't be able to...

Indeed. :-)

b.