TFTP usage at Linux shell prompt

Hi,

I am using JFFS2 file system for running the Linux on incaip board and would like to download a file from another host using TFTP.The following are the various commands and the respective outputs I have obtained when trying to download the file.

1.command: "#tftp 192.168.0.215"

output message:
BusyBox v1.00 (2007.11.20-05:01+0000) multi-call binary

Usage: tftp [OPTION]... HOST [PORT]

2.command: "# tftp -m binary 192.168.0.215"

output message:
"tftp: illegal option -- m
BusyBox v1.00 (2007.11.20-05:01+0000) multi-call binary"

3.command: "tftp v 192.168.0.215"

output message:

"BusyBox v1.00 (2007.11.20-05:01+0000) multi-call binary

Usage: tftp [OPTION]... HOST [PORT]"

Is the format of the commands valid, what are the list of options that could be given under OPTION field.
Kindly, give me some pointers to proceed in solving this issue.

Thank You,
Verma.

View this message in context: http://www.nabble.com/TFTP-usage-at-Linux-shell-prompt-tf4848314.html#a13871777
Sent from the Uboot - Users mailing list archive at Nabble.com.

After entering "busybox tftp" into google my first hit was
http://www.busybox.net/lists/busybox/2003-February/007972.html
which describes the tftp options. and which gives this tip

# ./busybox tftp --help
BusyBox v0.61.pre (2003.02.04-12:10+0000) multi-call binary

Usage: tftp [OPTION]... HOST [PORT]

Transfers a file from/to a tftp server using "octet" mode.

Options:
-l FILE Local FILE.
-r FILE Remote FILE.
-g Get file.
-p Put file.

Please consider also looking at the busybox homepage http://www.busybox.net/

This commonly called RTFM (Read the fucking manual)

Best regards

<[email protected]>: