Skip to contentSkip to conversation

kvmtool: Enable overriding Generic Timer frequency

PATCH In review Robin Murphy 2 participants 7 messages Dec 17, 2013 – Dec 18, 2013 KVM

lore
Share & tools
lore
#0 lore raw

cover kvmtool: Enable overriding Generic Timer frequency

This patch series allows (but discourages) overriding the Generic Timer frequency for device tree-based guest OSes, to work around systems with broken secure firmware that fails to program CNTFRQ correctly.

Robin Murphy (2):
kvmtool: Support unsigned int options kvmtool/arm: Add option to override Generic Timer frequency

 tools/kvm/arm/include/arm-common/kvm-config-arch.h |   15 ++++++++++-----
 tools/kvm/arm/timer.c                              |    2 ++
 tools/kvm/include/kvm/parse-options.h              |    9 +++++++++
 3 files changed, 21 insertions(+), 5 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/2 kvmtool: Support unsigned int options

Add support for unsigned int command-line options by implementing the OPT_UINTEGER macro.

---
 tools/kvm/include/kvm/parse-options.h |    9 +++++++++
 1 file changed, 9 insertions(+)
tools/kvm/include/kvm/parse-options.h +9 -0
index 09a5fca..b03f151 100644
@@ -109,6 +109,15 @@ struct option {
 	.help = (h)                         \
 }
 
+#define OPT_UINTEGER(s, l, v, h)            \
+{                                           \
+	.type = OPTION_UINTEGER,            \
+	.short_name = (s),                  \
+	.long_name = (l),                   \
+	.value = check_vtype(v, unsigned int *), \
+	.help = (h)                         \
+}
+
 #define OPT_U64(s, l, v, h)                 \
 {                                           \
 	.type = OPTION_U64,                 \
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 2/2 kvmtool/arm: Add option to override Generic Timer frequency

In reply to Robin Murphy

Some platforms have secure firmware which does not correctly set the CNTFRQ register on boot, preventing the use of the Generic Timer. This patch allows mirroring the necessary host workaround by specifying the clock-frequency property in the guest DT.

This should only be considered a means of KVM bring-up on such systems, such that vendors may be convinced to properly implement their firmware to support the virtualisation capabilities of their hardware.

---
 tools/kvm/arm/include/arm-common/kvm-config-arch.h |   15 ++++++++++-----
 tools/kvm/arm/timer.c                              |    2 ++
 2 files changed, 12 insertions(+), 5 deletions(-)
tools/kvm/arm/include/arm-common/kvm-config-arch.h +10 -5
index 7ac6f6e..f3baf39 100644
@@ -5,13 +5,18 @@
 
 struct kvm_config_arch {
 	const char *dump_dtb_filename;
+	unsigned int force_cntfrq;
 	bool aarch32_guest;
 };
 
-#define OPT_ARCH_RUN(pfx, cfg)						\
-	pfx,								\
-	ARM_OPT_ARCH_RUN(cfg)						\
-	OPT_STRING('\0', "dump-dtb", &(cfg)->dump_dtb_filename,		\
-		   ".dtb file", "Dump generated .dtb to specified file"),
+#define OPT_ARCH_RUN(pfx, cfg)							\
+	pfx,									\
+	ARM_OPT_ARCH_RUN(cfg)							\
+	OPT_STRING('\0', "dump-dtb", &(cfg)->dump_dtb_filename,			\
+		   ".dtb file", "Dump generated .dtb to specified file"),	\
+	OPT_UINTEGER('\0', "override-bad-firmware-cntfrq", &(cfg)->force_cntfrq,\
+		     "Specify Generic Timer frequency in guest DT to "		\
+		     "work around buggy secure firmware *Firmware should be "	\
+		     "updated to program CNTFRQ correctly*"),
 
 #endif /* ARM_COMMON__KVM_CONFIG_ARCH_H */
tools/kvm/arm/timer.c +2 -0
index bd6a0bb..d757c1d 100644
@@ -33,6 +33,8 @@ void timer__generate_fdt_nodes(void *fdt, struct kvm *kvm, int *irqs)
 	_FDT(fdt_begin_node(fdt, "timer"));
 	_FDT(fdt_property(fdt, "compatible", compatible, sizeof(compatible)));
 	_FDT(fdt_property(fdt, "interrupts", irq_prop, sizeof(irq_prop)));
+	if (kvm->cfg.arch.force_cntfrq > 0)
+		_FDT(fdt_property_cell(fdt, "clock-frequency", kvm->cfg.arch.force_cntfrq));
 	_FDT(fdt_end_node(fdt));
 }
 
Signature · 1 line
1.7.9.5
#3 lore raw

Re: [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency

Quoted 11 lines · Robin Murphy

Some platforms have secure firmware which does not correctly set the CNTFRQ register on boot, preventing the use of the Generic Timer. This patch allows mirroring the necessary host workaround by specifying the clock-frequency property in the guest DT.

This should only be considered a means of KVM bring-up on such systems, such that vendors may be convinced to properly implement their firmware to support the virtualisation capabilities of their hardware.

How does it encourage a vendor to properly implement their firmware if there's a workaround?

Alex

#4 lore raw

Re: [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency

Quoted 12 lines · Alexander Graf
Quoted 9 lines · Robin Murphy

Some platforms have secure firmware which does not correctly set the CNTFRQ register on boot, preventing the use of the Generic Timer. This patch allows mirroring the necessary host workaround by specifying the clock-frequency property in the guest DT.

This should only be considered a means of KVM bring-up on such systems, such that vendors may be convinced to properly implement their firmware to support the virtualisation capabilities of their hardware.

Quoted 9 lines
Quoted 2 lines

How does it encourage a vendor to properly implement their firmware if there's a workaround?

Alex

Hi Alex,

In short, by enabling the users to create the demand. Yes, like any workaround there's potential for abuse, but having *something* that makes it work is the difference between "I want virtualisation"[1] and "Dear vendor, I've tried virtualisation on your chip/board and it's great, but it tells me I need new firmware, where do I get that?"

Having the specs tell them what to do clearly isn't sufficient, so let's give the integrators and consumers incentive to shout at them too. The sooner proper support is commonplace and we can deprecate clock-frequency hacks altogether, the better.

Robin.

[1]
http://www.theregister.co.uk/2013/12/12/virtualisation_on_mobile_phones_is_coming/

#5 lore raw

Re: [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency

Quoted 23 lines · Robin Murphy
Quoted 12 lines · Alexander Graf
Quoted 9 lines · Robin Murphy

Some platforms have secure firmware which does not correctly set the CNTFRQ register on boot, preventing the use of the Generic Timer. This patch allows mirroring the necessary host workaround by specifying the clock-frequency property in the guest DT.

This should only be considered a means of KVM bring-up on such systems, such that vendors may be convinced to properly implement their firmware to support the virtualisation capabilities of their hardware.

Quoted 9 lines
Quoted 2 lines

How does it encourage a vendor to properly implement their firmware if there's a workaround?

Alex

Quoted 5 lines

Hi Alex,

In short, by enabling the users to create the demand. Yes, like any workaround there's potential for abuse, but having *something* that makes it work is the difference between "I want virtualisation"[1] and "Dear vendor, I've tried virtualisation on your chip/board and it's great, but it tells me I need new firmware, where do I get that?"

Having the specs tell them what to do clearly isn't sufficient, so let's give the integrators and consumers incentive to shout at them too. The sooner proper support is commonplace and we can deprecate clock-frequency hacks altogether, the better.

Oh, I'm all for hacks. But please don't fall under the illusion that this will push vendors to fix their firmware. It will have the opposite effect - vendors will just point to the workaround and say "but it works" :).

Either way, this hack is basically required because you can't program CNTFRQ because it's controlled by secure firmware, right? So the host os already needs to know about this and probably does have a "clock-frequency" value in its device tree entry already to know how fast its clock ticks.

Couldn't we search for that host entry and automatically pass it into the guest if it's there? That way the whole thing becomes seamless and even less of an issue.

Alex

#6 lore raw

Re: [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency

Quoted 8 lines · Alexander Graf

[...]

Quoted 7 lines
Quoted 6 lines

How does it encourage a vendor to properly implement their firmware if there's a workaround?

Alex

Quoted 8 lines
Quoted 5 lines

Hi Alex,

In short, by enabling the users to create the demand. Yes, like any workaround there's potential for abuse, but having *something* that makes it work is the difference between "I want virtualisation"[1] and "Dear vendor, I've tried virtualisation on your chip/board and it's great, but it tells me I need new firmware, where do I get that?"

Having the specs tell them what to do clearly isn't sufficient, so let's give the integrators and consumers incentive to shout at them too. The sooner proper support is commonplace and we can deprecate clock-frequency hacks altogether, the better.

Oh, I'm all for hacks. But please don't fall under the illusion that this will push vendors to fix their firmware. It will have the opposite effect - vendors will just point to the workaround and say "but it works" :).

If vendors already aren't bothering to support functionality available in their flagship hardware, workarounds hardly make that worse, and are a win for the user. If it can drive adoption enough to get vendors to see the value in at least fixing future products, that's only good.

Quoted 2 lines

Either way, this hack is basically required because you can't program CNTFRQ because it's controlled by secure firmware, right? So the host os already needs to know about this and probably does have a "clock-frequency" value in its device tree entry already to know how fast its clock ticks.

In some cases, yes. In others they don't explicitly use the arch timer at all thus have no frequency set anywhere. In the case of the board I have on my desk, it took hacking the non-secure part of the bootloader, writing a shim to throw away the securely-booted non-hyp cpu0 and fire up a secondary, and hacking a timer node into the host DT to even get as far as having an issue with kvmtool.

Quoted 2 lines

Couldn't we search for that host entry and automatically pass it into the guest if it's there? That way the whole thing becomes seamless and even less of an issue.

In theory that would be an ideal solution, yes. In practice it means
either making KVM dependent on PROC_DEVICETREE (yuck) or cooking up some
kernel interface to expose the system timer frequency to userspace
(double yuck). Not just "global solution to local problem", but "global
solution to local problem-that-shouldn't-even-exist-and-you-want-to-go-away-as-soon-as-possible-without-leaving-a-legacy". Besides, that would probably just reinforce the equally wrong behaviour
of putting the frequency in the host DT instead of fixing the firmware ;)

Robin.

Quoted 4 lines

Alex