Skip to contentSkip to conversation

ixgbe: acquire RCU read lock when calling netdev_for_each_all_upper_dev_rcu()

RFC PATCH In review Jiang Liu 2 participants 2 messages Dec 19, 2013

Subsystems (3)
lore
Share & tools
lore

Jiang Liu

author
#0 lore raw

RFC PATCH 1/1 ixgbe: acquire RCU read lock when calling netdev_for_each_all_upper_dev_rcu()

According to documentation for netdev_for_each_all_upper_dev_rcu(), caller should take RCU read lock, otherwise it will trigger following warnings. The simplest fix is to protect with rcu_read_lock()/ rcu_read_unlock(). And this solutions passes basic tests.

Otherwise we may need to introduce netdev_for_each_all_upper_dev() as netdev_lower_get_next_private(), which assumes the caller has gained the lock to protect the list.

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +6 -0
index cc06854..da72a5f 100644
@@ -4336,6 +4336,7 @@ static void ixgbe_configure_dfwd(struct ixgbe_adapter *adapter)
 	struct list_head *iter;
 	int err;
 
+	rcu_read_lock();
 	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
 		if (netif_is_macvlan(upper)) {
 			struct macvlan_dev *dfwd = netdev_priv(upper);
@@ -4348,6 +4349,7 @@ static void ixgbe_configure_dfwd(struct ixgbe_adapter *adapter)
 			}
 		}
 	}
+	rcu_read_unlock();
 }
 
 static void ixgbe_configure(struct ixgbe_adapter *adapter)
@@ -4601,6 +4603,7 @@ static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	netif_tx_start_all_queues(adapter->netdev);
 
 	/* enable any upper devices */
+	rcu_read_lock();
 	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
 		if (netif_is_macvlan(upper)) {
 			struct macvlan_dev *vlan = netdev_priv(upper);
@@ -4609,6 +4612,7 @@ static void ixgbe_up_complete(struct ixgbe_adapter *adapter)
 				netif_tx_start_all_queues(upper);
 		}
 	}
+	rcu_read_unlock();
 
 	/* bring the link up in the watchdog, this could race with our first
 	 * link up interrupt but shouldn't be a problem */
@@ -4803,6 +4807,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	netif_tx_disable(netdev);
 
 	/* disable any upper devices */
+	rcu_read_lock();
 	netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) {
 		if (netif_is_macvlan(upper)) {
 			struct macvlan_dev *vlan = netdev_priv(upper);
@@ -4814,6 +4819,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 			}
 		}
 	}
+	rcu_read_unlock();
 
 	ixgbe_irq_disable(adapter);
 
Signature · 1 line
1.7.10.4
#1 lore raw
Quoted 11 lines · Jiang Liu

According to documentation for netdev_for_each_all_upper_dev_rcu(), caller should take RCU read lock, otherwise it will trigger following warnings. The simplest fix is to protect with rcu_read_lock()/ rcu_read_unlock(). And this solutions passes basic tests.

Otherwise we may need to introduce netdev_for_each_all_upper_dev() as netdev_lower_get_next_private(), which assumes the caller has gained the lock to protect the list.

---

Jiang,

The following patch addresses the same issue,

http://patchwork.ozlabs.org/patch/302711/
[net,1/5] net: allow netdev_all_upper_get_next_dev_rcu with rtnl lock held

It is under review and solves the problem by having the call check for the rtnl lock as well. Take a look. I think it is a slightly better fix in that it doesn't clutter the driver with unnecessary rcu_read_lock() and rcu_read_unlock() calls.

Thanks,
John