Bluetooth: Set HCI_QUIRK_RESET_ON_CLOSE for Socket SDIO cards
Marcel Holtmann
maintainerPATCH 1/1 Bluetooth: Set HCI_QUIRK_RESET_ON_CLOSE for Socket SDIO cards
The Socket Bluetooth SDIO cards are branded versions of Toshiba SD-BT2 and they do not support sending HCI_Reset as first command. To make this card work the HCI_QUIRK_RESET_ON_CLOSE quirk needs to be set before registering the controller.
Signed-off-by Marcel Holtmann <[email protected]>
--- drivers/bluetooth/btsdio.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/bluetooth/btsdio.c +3 -0
@@ -333,6 +333,9 @@ static int btsdio_probe(struct sdio_func *func, hdev->flush = btsdio_flush; hdev->send = btsdio_send_frame; +if (func->vendor ==0x0104 && func->device ==0x00c5 ) +set_bit (HCI_QUIRK_RESET_ON_CLOSE , &hdev->quirks); + err =hci_register_dev (hdev);if (err <0 ) {hci_free_dev (hdev);
Signature · 1 line
1.8.4.2
Johan Hedberg
AppliedHi Marcel,
Quoted 9 lines · Marcel Holtmann
The Socket Bluetooth SDIO cards are branded versions of Toshiba SD-BT2 and they do not support sending
HCI_Resetas first command. To make this card work theHCI_QUIRK_RESET_ON_CLOSEquirk needs to be set before registering the controller.Signed-off-by Marcel Holtmann <[email protected]>--- drivers/bluetooth/btsdio.c | 3 +++ 1 file changed, 3 insertions(+)
Applied to bluetooth-next. Thanks.
Johan