ARM: dts: imx6qdl: Pass "fsl,imx6q-mmdc" to MMDC1 port
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx6qdl: Pass "fsl,imx6q-mmdc" to MMDC1 port
From: Fabio Estevam <[email protected]>
Currently only MMDC0 port passes the "compatible = "fsl,imx6q-mmdc".
Do the same for MMDC1.
Basically all that 'fsl,imx6q-mmdc' does is to clear the PSD bit of MMDCx_MAPSR register, so do the same for MMDC1.
--- arch/arm/boot/dts/imx6qdl.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx6qdl.dtsi +1 -0
@@ -833,6 +833,7 @@ }; mmdc1: mmdc at 021b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc"; reg = <0x021b4000 0x4000>; };
Signature · 1 line
1.8.1.2
PATCH 1/1 ARM: dts: imx6qdl: Pass "fsl,imx6q-mmdc" to MMDC1 port
Quoted 19 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Currently only MMDC0 port passes the "compatible = "fsl,imx6q-mmdc".
Do the same for MMDC1.
Basically all that 'fsl,imx6q-mmdc' does is to clear the PSD bit of
MMDCx_MAPSRregister, so do the same for MMDC1.Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx6qdl.dtsi | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/imx6qdl.dtsi +0
-0
arch/arm/boot/dts/imx6qdl.dtsi line 836
Quoted 4 lines
arch/arm/boot/dts/imx6qdl.dtsi +1
-0@@ -833,6 +833,7 @@ }; mmdc1: mmdc at 021b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc";
Do you have a real usage of this change? If not, I would defer it to the time when we have a real use case.
Shawn
Quoted 6 lines
arch/arm/boot/dts/imx6qdl.dtsi +0
-0reg = <0x021b4000 0x4000>; };Signature · 1 line
1.8.1.2