Skip to contentSkip to conversation

drm/radeon: set correct pipe config for Hawaii in DCE

PATCH In review Marek Olšák 2 participants 3 messages Dec 23, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/radeon: set correct pipe config for Hawaii in DCE

From: Marek Olšák <[email protected]>

---
 drivers/gpu/drm/radeon/atombios_crtc.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/gpu/drm/radeon/atombios_crtc.c +6 -13
index b197059..ec97bad 100644
@@ -1180,19 +1180,12 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
 
 	if (rdev->family >= CHIP_BONAIRE) {
-		u32 num_pipe_configs = rdev->config.cik.max_tile_pipes;
-		u32 num_rb = rdev->config.cik.max_backends_per_se;
-		if (num_pipe_configs > 8)
-			num_pipe_configs = 8;
-		if (num_pipe_configs == 8)
-			fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P8_32x32_16x16);
-		else if (num_pipe_configs == 4) {
-			if (num_rb == 4)
-				fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_16x16);
-			else if (num_rb < 4)
-				fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_8x16);
-		} else if (num_pipe_configs == 2)
-			fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P2);
+		/* Read the pipe config from the 2D TILED SCANOUT mode.
+		 * It should be the same for the other modes too, but not all
+		 * modes set the pipe config field. */
+		u32 pipe_config = (rdev->config.cik.tile_mode_array[10] >> 6) & 0x1f;
+
+		fb_format |= CIK_GRPH_PIPE_CONFIG(pipe_config);
 	} else if ((rdev->family == CHIP_TAHITI) ||
 		   (rdev->family == CHIP_PITCAIRN))
 		fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
Signature · 6 lines
1.8.3.2

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH 2/2 drm/radeon: set correct number of banks for CIK chips in DCE

From: Marek Olšák <[email protected]>

We don't have the NUM_BANKS parameter, so we have to calculate it from the other parameters. NUM_BANKS is not constant on CIK.

This fixes 2D tiling for the display engine on CIK.

---
 drivers/gpu/drm/radeon/atombios_crtc.c | 64 +++++++++++++++++++++++-----------
 1 file changed, 43 insertions(+), 21 deletions(-)
drivers/gpu/drm/radeon/atombios_crtc.c +43 -21
index ec97bad..0b9621c 100644
@@ -1143,31 +1143,53 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
 	}
 
 	if (tiling_flags & RADEON_TILING_MACRO) {
-		if (rdev->family >= CHIP_BONAIRE)
-			tmp = rdev->config.cik.tile_config;
-		else if (rdev->family >= CHIP_TAHITI)
-			tmp = rdev->config.si.tile_config;
-		else if (rdev->family >= CHIP_CAYMAN)
-			tmp = rdev->config.cayman.tile_config;
-		else
-			tmp = rdev->config.evergreen.tile_config;
+		evergreen_tiling_fields(tiling_flags, &bankw, &bankh, &mtaspect, &tile_split);
 
-		switch ((tmp & 0xf0) >> 4) {
-		case 0: /* 4 banks */
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK);
-			break;
-		case 1: /* 8 banks */
-		default:
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK);
-			break;
-		case 2: /* 16 banks */
-			fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK);
-			break;
+		/* Set NUM_BANKS. */
+		if (rdev->family >= CHIP_BONAIRE) {
+			unsigned tileb, index, num_banks, tile_split_bytes;
+
+			/* Calculate the macrotile mode index. */
+			tile_split_bytes = 64 << tile_split;
+			tileb = 8 * 8 * target_fb->bits_per_pixel / 8;
+			tileb = min(tile_split_bytes, tileb);
+
+			for (index = 0; tileb > 64; index++) {
+				tileb >>= 1;
+			}
+
+			if (index >= 16) {
+				DRM_ERROR("Wrong screen bpp (%u) or tile split (%u)\n",
+					  target_fb->bits_per_pixel, tile_split);
+				return -EINVAL;
+			}
+
+			num_banks = (rdev->config.cik.macrotile_mode_array[index] >> 6) & 0x3;
+			fb_format |= EVERGREEN_GRPH_NUM_BANKS(num_banks);
+		} else {
+			/* SI and older. */
+			if (rdev->family >= CHIP_TAHITI)
+				tmp = rdev->config.si.tile_config;
+			else if (rdev->family >= CHIP_CAYMAN)
+				tmp = rdev->config.cayman.tile_config;
+			else
+				tmp = rdev->config.evergreen.tile_config;
+
+			switch ((tmp & 0xf0) >> 4) {
+			case 0: /* 4 banks */
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_4_BANK);
+				break;
+			case 1: /* 8 banks */
+			default:
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_8_BANK);
+				break;
+			case 2: /* 16 banks */
+				fb_format |= EVERGREEN_GRPH_NUM_BANKS(EVERGREEN_ADDR_SURF_16_BANK);
+				break;
+			}
 		}
 
 		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1);
-
-		evergreen_tiling_fields(tiling_flags, &bankw, &bankh, &mtaspect, &tile_split);
 		fb_format |= EVERGREEN_GRPH_TILE_SPLIT(tile_split);
 		fb_format |= EVERGREEN_GRPH_BANK_WIDTH(bankw);
 		fb_format |= EVERGREEN_GRPH_BANK_HEIGHT(bankh);
Signature · 6 lines
1.8.3.2

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw
In reply to Marek Olšák
Quoted 3 lines · Marek Olšák

From: Marek Olšák <[email protected]>

Series applied to my fixes tree. Thanks!

Alex

Quoted 37 lines
---
 drivers/gpu/drm/radeon/atombios_crtc.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/gpu/drm/radeon/atombios_crtc.c +6 -14
index b197059..ec97bad 100644
@@ -1180,19 +1180,12 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
                fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
 
        if (rdev->family >= CHIP_BONAIRE) {
-               u32 num_pipe_configs = rdev->config.cik.max_tile_pipes;
-               u32 num_rb = rdev->config.cik.max_backends_per_se;
-               if (num_pipe_configs > 8)
-                       num_pipe_configs = 8;
-               if (num_pipe_configs == 8)
-                       fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P8_32x32_16x16);
-               else if (num_pipe_configs == 4) {
-                       if (num_rb == 4)
-                               fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_16x16);
-                       else if (num_rb < 4)
-                               fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_8x16);
-               } else if (num_pipe_configs == 2)
-                       fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P2);
+               /* Read the pipe config from the 2D TILED SCANOUT mode.
+                * It should be the same for the other modes too, but not all
+                * modes set the pipe config field. */
+               u32 pipe_config = (rdev->config.cik.tile_mode_array[10] >> 6) & 0x1f;
+
+               fb_format |= CIK_GRPH_PIPE_CONFIG(pipe_config);
        } else if ((rdev->family == CHIP_TAHITI) ||
                   (rdev->family == CHIP_PITCAIRN))
                fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
--

1.8.3.2

Quoted 4 lines

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel