Skip to contentSkip to conversation

perf tools: Move arch setup into seprate Makefile

PATCH New Jiri Olsa 2 participants 4 messages Jan 3, 2014 – Jan 14, 2014 perf events

lore
Share & tools
lore

Jiri Olsa

author
#0 lore raw

PATCH 1/2 perf tools: Move arch setup into seprate Makefile

From: "[email protected]" <[email protected]>

I need to use arch related setup in the tests/make, so moving arch setup into Makefile.arch.

Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
---
 tools/perf/config/Makefile      | 52 ++++++++++++++---------------------------
 tools/perf/config/Makefile.arch | 22 +++++++++++++++++
 2 files changed, 40 insertions(+), 34 deletions(-)
 create mode 100644 tools/perf/config/Makefile.arch
tools/perf/config/Makefile +18 -34
index 14faeeb..f2bc659 100644
@@ -1,28 +1,26 @@
-uname_M := $(shell uname -m 2>/dev/null || echo not)
 
-ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-                                  -e s/arm.*/arm/ -e s/sa110/arm/ \
-                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
-NO_PERF_REGS := 1
-CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
+ifeq ($(src-perf),)
+src-perf := $(srctree)/tools/perf
+endif
 
-# Additional ARCH settings for x86
-ifeq ($(ARCH),i386)
-  override ARCH := x86
-  NO_PERF_REGS := 0
-  LIBUNWIND_LIBS = -lunwind -lunwind-x86
+ifeq ($(obj-perf),)
+obj-perf := $(OUTPUT)
 endif
 
-ifeq ($(ARCH),x86_64)
-  override ARCH := x86
-  IS_X86_64 := 0
-  ifeq (, $(findstring m32,$(CFLAGS)))
-    IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
-  endif
+ifneq ($(obj-perf),)
+obj-perf := $(abspath $(obj-perf))/
+endif
+
+LIB_INCLUDE := $(srctree)/tools/lib/
+CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
+
+include $(src-perf)/config/Makefile.arch
+
+NO_PERF_REGS := 1
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),x86)
   ifeq (${IS_X86_64}, 1)
-    RAW_ARCH := x86_64
     CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT
     ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
     LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
@@ -64,20 +62,6 @@ ifeq ($(NO_PERF_REGS),0)
   CFLAGS += -DHAVE_PERF_REGS_SUPPORT
 endif
 
-ifeq ($(src-perf),)
-src-perf := $(srctree)/tools/perf
-endif
-
-ifeq ($(obj-perf),)
-obj-perf := $(OUTPUT)
-endif
-
-ifneq ($(obj-perf),)
-obj-perf := $(abspath $(obj-perf))/
-endif
-
-LIB_INCLUDE := $(srctree)/tools/lib/
-
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
 
tools/perf/config/Makefile.arch new file +22 -0
new file mode 100644
index 0000000..fef8ae9
@@ -0,0 +1,22 @@
+
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+                                  -e s/arm.*/arm/ -e s/sa110/arm/ \
+                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+  override ARCH := x86
+endif
+
+ifeq ($(ARCH),x86_64)
+  override ARCH := x86
+  IS_X86_64 := 0
+  ifeq (, $(findstring m32,$(CFLAGS)))
+    IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
+    RAW_ARCH := x86_64
+  endif
+endif
Signature · 1 line
1.8.3.1
author
#1 lore raw

PATCH 2/2 perf tests: Fix installation tests path setup

From: "[email protected]" <[email protected]>

Currently installation tests work only over x86_64, adding arch check to make it work over i386 as well.

NOTE looks like x86 is the only arch running tests, we need some IS_(32/64) flag to make this generic.

Cc Corey Ashford <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Arnaldo Carvalho de Melo <[email protected]>
Cc David Ahern <[email protected]>
---
 tools/perf/tests/make | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
tools/perf/tests/make +20 -10
index f641c35..e341088 100644
@@ -1,6 +1,16 @@
 PERF := .
 MK   := Makefile
 
+include config/Makefile.arch
+
+# FIXME looks like x86 is the only arch running tests ;-)
+# we need some IS_(32/64) flag to make this generic
+ifeq ($(IS_X86_64),1)
+lib = lib64
+else
+lib = lib
+endif
+
 has = $(shell which $1 2>/dev/null)
 
 # standard single make variable specified
@@ -118,16 +128,16 @@ installed_files_bin := bin/perf
 installed_files_bin += etc/bash_completion.d/perf
 installed_files_bin += libexec/perf-core/perf-archive
 
-installed_files_plugins := lib64/traceevent/plugins/plugin_cfg80211.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_scsi.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_xen.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_function.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_sched_switch.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_mac80211.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_kvm.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_kmem.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_hrtimer.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_jbd2.so
+installed_files_plugins := $(lib)/traceevent/plugins/plugin_cfg80211.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_scsi.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_xen.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_function.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_sched_switch.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_mac80211.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_kvm.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_kmem.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_hrtimer.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_jbd2.so
 
 installed_files_all := $(installed_files_bin)
 installed_files_all += $(installed_files_plugins)
Signature · 1 line
1.8.3.1
#2 lore raw

[tip:perf/core] perf tests: Fix installation tests path setup

perf tests: Fix installation tests path setup
Commit-ID:  f7c64474242701eb24f6fe96f8df0389a2b800f7
Gitweb:     http://git.kernel.org/tip/f7c64474242701eb24f6fe96f8df0389a2b800f7
Author:     Jiri Olsa <[email protected]>
AuthorDate: Fri, 3 Jan 2014 15:32:33 +0100
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 13 Jan 2014 10:06:23 -0300

perf tests: Fix installation tests path setup

Currently installation tests work only over x86_64, adding arch check to make it work over i386 as well.

NOTE looks like x86 is the only arch running tests, we need some IS_(32/64) flag to make this generic.

Cc Corey Ashford <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/tests/make | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
tools/perf/tests/make +20 -10
index f641c35..e341088 100644
@@ -1,6 +1,16 @@
 PERF := .
 MK   := Makefile
 
+include config/Makefile.arch
+
+# FIXME looks like x86 is the only arch running tests ;-)
+# we need some IS_(32/64) flag to make this generic
+ifeq ($(IS_X86_64),1)
+lib = lib64
+else
+lib = lib
+endif
+
 has = $(shell which $1 2>/dev/null)
 
 # standard single make variable specified
@@ -118,16 +128,16 @@ installed_files_bin := bin/perf
 installed_files_bin += etc/bash_completion.d/perf
 installed_files_bin += libexec/perf-core/perf-archive
 
-installed_files_plugins := lib64/traceevent/plugins/plugin_cfg80211.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_scsi.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_xen.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_function.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_sched_switch.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_mac80211.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_kvm.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_kmem.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_hrtimer.so
-installed_files_plugins += lib64/traceevent/plugins/plugin_jbd2.so
+installed_files_plugins := $(lib)/traceevent/plugins/plugin_cfg80211.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_scsi.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_xen.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_function.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_sched_switch.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_mac80211.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_kvm.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_kmem.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_hrtimer.so
+installed_files_plugins += $(lib)/traceevent/plugins/plugin_jbd2.so
 
 installed_files_all := $(installed_files_bin)
 installed_files_all += $(installed_files_plugins)
#3 lore raw
In reply to Jiri Olsa
perf tools: Move arch setup into seprate Makefile
Commit-ID:  a6cf5f39236c2ea6008a2f5cb908c3181c123096
Gitweb:     http://git.kernel.org/tip/a6cf5f39236c2ea6008a2f5cb908c3181c123096
Author:     Jiri Olsa <[email protected]>
AuthorDate: Fri, 3 Jan 2014 15:32:32 +0100
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Mon, 13 Jan 2014 10:06:22 -0300

perf tools: Move arch setup into seprate Makefile

I need to use arch related setup in the tests/make, so moving arch setup into Makefile.arch.

Cc Corey Ashford <[email protected]>
Cc David Ahern <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/config/Makefile      | 52 ++++++++++++++---------------------------
 tools/perf/config/Makefile.arch | 22 +++++++++++++++++
 2 files changed, 40 insertions(+), 34 deletions(-)
tools/perf/config/Makefile +18 -34
index 14faeeb..f2bc659 100644
@@ -1,28 +1,26 @@
-uname_M := $(shell uname -m 2>/dev/null || echo not)
 
-ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-                                  -e s/arm.*/arm/ -e s/sa110/arm/ \
-                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
-NO_PERF_REGS := 1
-CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
+ifeq ($(src-perf),)
+src-perf := $(srctree)/tools/perf
+endif
 
-# Additional ARCH settings for x86
-ifeq ($(ARCH),i386)
-  override ARCH := x86
-  NO_PERF_REGS := 0
-  LIBUNWIND_LIBS = -lunwind -lunwind-x86
+ifeq ($(obj-perf),)
+obj-perf := $(OUTPUT)
 endif
 
-ifeq ($(ARCH),x86_64)
-  override ARCH := x86
-  IS_X86_64 := 0
-  ifeq (, $(findstring m32,$(CFLAGS)))
-    IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
-  endif
+ifneq ($(obj-perf),)
+obj-perf := $(abspath $(obj-perf))/
+endif
+
+LIB_INCLUDE := $(srctree)/tools/lib/
+CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
+
+include $(src-perf)/config/Makefile.arch
+
+NO_PERF_REGS := 1
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),x86)
   ifeq (${IS_X86_64}, 1)
-    RAW_ARCH := x86_64
     CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT
     ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
     LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
@@ -64,20 +62,6 @@ ifeq ($(NO_PERF_REGS),0)
   CFLAGS += -DHAVE_PERF_REGS_SUPPORT
 endif
 
-ifeq ($(src-perf),)
-src-perf := $(srctree)/tools/perf
-endif
-
-ifeq ($(obj-perf),)
-obj-perf := $(OUTPUT)
-endif
-
-ifneq ($(obj-perf),)
-obj-perf := $(abspath $(obj-perf))/
-endif
-
-LIB_INCLUDE := $(srctree)/tools/lib/
-
 # include ARCH specific config
 -include $(src-perf)/arch/$(ARCH)/Makefile
 
tools/perf/config/Makefile.arch new file +22 -0
new file mode 100644
index 0000000..fef8ae9
@@ -0,0 +1,22 @@
+
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+                                  -e s/arm.*/arm/ -e s/sa110/arm/ \
+                                  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+                                  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+                                  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+  override ARCH := x86
+endif
+
+ifeq ($(ARCH),x86_64)
+  override ARCH := x86
+  IS_X86_64 := 0
+  ifeq (, $(findstring m32,$(CFLAGS)))
+    IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
+    RAW_ARCH := x86_64
+  endif
+endif