Skip to contentSkip to conversation

Get EDID late for VGA switcheroo

PATCH In review Ramkumar Ramachandra 1 participant 6 messages Jan 7, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover Get EDID late for VGA switcheroo

Hi Chris et al,

I got this far with creating a generic interface for various get_edid() functions, but I'm stuck now. Where do I get the specific i2c_adapter from?

I hope the series is okay otherwise.

Thanks.

Ramkumar Ramachandra (4):
drm/i915: add support for vga_switcheroo reprobe drm/i915: factor out intel_lvds_get_edid() drm/i915: change intel_sdvo_get_edid() prototype drm/i915: introduce intel_connector->reprobe

 drivers/gpu/drm/i915/i915_dma.c   |   8 ++-
 drivers/gpu/drm/i915/intel_crt.c  |   1 +
 drivers/gpu/drm/i915/intel_dp.c   |   1 +
 drivers/gpu/drm/i915/intel_drv.h  |   6 +++
 drivers/gpu/drm/i915/intel_lvds.c | 101 ++++++++++++++++++++++----------------
 drivers/gpu/drm/i915/intel_sdvo.c |  17 ++++---
 6 files changed, 84 insertions(+), 50 deletions(-)
Signature · 1 line
1.8.5.2.229.g4448466
#1 lore raw

PATCH v2 1/4 drm/i915: add support for vga_switcheroo reprobe

---
 drivers/gpu/drm/i915/i915_dma.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_dma.c +7 -1
index 5c64842..336a835b 100644
@@ -1265,6 +1265,12 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_
 	}
 }
 
+static void i915_switcheroo_reprobe(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	intel_fbdev_output_poll_changed(dev);
+}
+
 static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
@@ -1278,7 +1284,7 @@ static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
 
 static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
 	.set_gpu_state = i915_switcheroo_set_state,
-	.reprobe = NULL,
+	.reprobe = i915_switcheroo_reprobe,
 	.can_switch = i915_switcheroo_can_switch,
 };
 
Signature · 1 line
1.8.5.2.229.g4448466
#2 lore raw

PATCH v2 2/4 drm/i915: factor out intel_lvds_get_edid()

In reply to Ramkumar Ramachandra

Corresponding to

intel_crt_get_edid()
intel_sdvo_get_edid()
intel_dp_get_edid()

add a intel_lvds_get_edid(). We plan to call this during a switcheroo-reprobe in later patches.

Cc Chris Wilson <[email protected]>
Cc Andreas Heider <[email protected]>
Cc Seth Forshee <[email protected]>
---
 drivers/gpu/drm/i915/intel_lvds.c | 100 ++++++++++++++++++++++----------------
 1 file changed, 57 insertions(+), 43 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +57 -43
index c3b4da7..e7aa285 100644
@@ -921,6 +921,60 @@ static bool intel_lvds_supported(struct drm_device *dev)
 	return false;
 }
 
+static struct edid *intel_lvds_get_edid(struct drm_connector *connector,
+					struct i2c_adapter *i2c)
+{
+	struct edid *edid;
+	struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *scan; /* *modes, *bios_mode; */
+	struct drm_display_mode *fixed_mode = NULL;
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	edid = drm_get_edid(connector, i2c);
+	if (edid) {
+		if (drm_add_edid_modes(connector, edid)) {
+			drm_mode_connector_update_edid_property(connector,
+								edid);
+		} else {
+			kfree(edid);
+			edid = ERR_PTR(-EINVAL);
+		}
+	} else {
+		edid = ERR_PTR(-ENOENT);
+	}
+	lvds_connector->base.edid = edid;
+
+	if (IS_ERR_OR_NULL(edid)) {
+		/* Didn't get an EDID, so
+		 * Set wide sync ranges so we get all modes
+		 * handed to valid_mode for checking
+		 */
+		connector->display_info.min_vfreq = 0;
+		connector->display_info.max_vfreq = 200;
+		connector->display_info.min_hfreq = 0;
+		connector->display_info.max_hfreq = 200;
+	}
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			DRM_DEBUG_KMS("using preferred mode from EDID: ");
+			drm_mode_debug_printmodeline(scan);
+
+			fixed_mode = drm_mode_duplicate(dev, scan);
+			if (fixed_mode) {
+				intel_find_lvds_downclock(dev, fixed_mode,
+							  connector);
+				return edid;
+			}
+		}
+	}
+	return NULL;
+}
+
 /**
  * intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -937,7 +991,6 @@ void intel_lvds_init(struct drm_device *dev)
 	struct intel_connector *intel_connector;
 	struct drm_connector *connector;
 	struct drm_encoder *encoder;
-	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_display_mode *fixed_mode = NULL;
 	struct edid *edid;
 	struct drm_crtc *crtc;
@@ -1036,48 +1089,9 @@ void intel_lvds_init(struct drm_device *dev)
 	 *    if closed, act like it's not there for now
 	 */
 
-	/*
-	 * Attempt to get the fixed panel mode from DDC.  Assume that the
-	 * preferred mode is the right one.
-	 */
-	edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
-	if (edid) {
-		if (drm_add_edid_modes(connector, edid)) {
-			drm_mode_connector_update_edid_property(connector,
-								edid);
-		} else {
-			kfree(edid);
-			edid = ERR_PTR(-EINVAL);
-		}
-	} else {
-		edid = ERR_PTR(-ENOENT);
-	}
-	lvds_connector->base.edid = edid;
-
-	if (IS_ERR_OR_NULL(edid)) {
-		/* Didn't get an EDID, so
-		 * Set wide sync ranges so we get all modes
-		 * handed to valid_mode for checking
-		 */
-		connector->display_info.min_vfreq = 0;
-		connector->display_info.max_vfreq = 200;
-		connector->display_info.min_hfreq = 0;
-		connector->display_info.max_hfreq = 200;
-	}
-
-	list_for_each_entry(scan, &connector->probed_modes, head) {
-		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
-			DRM_DEBUG_KMS("using preferred mode from EDID: ");
-			drm_mode_debug_printmodeline(scan);
-
-			fixed_mode = drm_mode_duplicate(dev, scan);
-			if (fixed_mode) {
-				intel_find_lvds_downclock(dev, fixed_mode,
-							  connector);
-				goto out;
-			}
-		}
-	}
+	edid = intel_lvds_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
+	if (edid)
+		goto out;
 
 	/* Failed to get EDID, what about VBT? */
 	if (dev_priv->vbt.lfp_lvds_vbt_mode) {
Signature · 1 line
1.8.5.2.229.g4448466
#3 lore raw

PATCH v2 3/4 drm/i915: change intel_sdvo_get_edid() prototype

In reply to Ramkumar Ramachandra

In future patches, we intend to introduce a generic interface to the various get_edid() functions. All the other get_edid() functions accept two arguments: a struct drm_connector *, and a struct i2c_adapter *. So, introduce a second dummy variable in intel_sdvo_get_edid().

Cc Chris Wilson <[email protected]>
Cc Andreas Heider <[email protected]>
Cc Seth Forshee <[email protected]>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_sdvo.c +7 -6
index a583e8f..beb40e5 100644
@@ -1612,7 +1612,8 @@ intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
 }
 
 static struct edid *
-intel_sdvo_get_edid(struct drm_connector *connector)
+intel_sdvo_get_edid(struct drm_connector *connector,
+		struct i2c_adapter __maybe_unused *dummy)
 {
 	struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
 	return drm_get_edid(connector, &sdvo->ddc);
@@ -1636,7 +1637,7 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
 	enum drm_connector_status status;
 	struct edid *edid;
 
-	edid = intel_sdvo_get_edid(connector);
+	edid = intel_sdvo_get_edid(connector, NULL);
 
 	if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) {
 		u8 ddc, saved_ddc = intel_sdvo->ddc_bus;
@@ -1647,7 +1648,7 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
 		 */
 		for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) {
 			intel_sdvo->ddc_bus = ddc;
-			edid = intel_sdvo_get_edid(connector);
+			edid = intel_sdvo_get_edid(connector, NULL);
 			if (edid)
 				break;
 		}
@@ -1740,7 +1741,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 		struct edid *edid;
 
 		/* if we have an edid check it matches the connection */
-		edid = intel_sdvo_get_edid(connector);
+		edid = intel_sdvo_get_edid(connector, NULL);
 		if (edid == NULL)
 			edid = intel_sdvo_get_analog_edid(connector);
 		if (edid != NULL) {
@@ -1777,7 +1778,7 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
 		      connector->base.id, drm_get_connector_name(connector));
 
 	/* set the bus switch and get the modes */
-	edid = intel_sdvo_get_edid(connector);
+	edid = intel_sdvo_get_edid(connector, NULL);
 
 	/*
 	 * Mac mini hack.  On this device, the DVI-I connector shares one DDC
@@ -2022,7 +2023,7 @@ static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector)
 	if (!intel_sdvo->is_hdmi)
 		return false;
 
-	edid = intel_sdvo_get_edid(connector);
+	edid = intel_sdvo_get_edid(connector, NULL);
 	if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL)
 		has_audio = drm_detect_monitor_audio(edid);
 	kfree(edid);
Signature · 1 line
1.8.5.2.229.g4448466
#4 lore raw

PATCH v2 4/4 drm/i915: introduce intel_connector->reprobe

In reply to Ramkumar Ramachandra

Introduce a struct edid *(*reprobe)(struct drm_connector *, struct i2c_adapter *) in struct intel_connector to point to various get_edid() functions.

Cc Chris Wilson <[email protected]>
Cc Andreas Heider <[email protected]>
Cc Seth Forshee <[email protected]>
---
 drivers/gpu/drm/i915/intel_crt.c  | 1 +
 drivers/gpu/drm/i915/intel_dp.c   | 1 +
 drivers/gpu/drm/i915/intel_drv.h  | 6 ++++++
 drivers/gpu/drm/i915/intel_lvds.c | 1 +
 drivers/gpu/drm/i915/intel_sdvo.c | 4 ++++
 5 files changed, 13 insertions(+)
drivers/gpu/drm/i915/intel_crt.c +1 -0
index b5b1b9b..4e678fe 100644
@@ -832,6 +832,7 @@ void intel_crt_init(struct drm_device *dev)
 		crt->base.get_hw_state = intel_crt_get_hw_state;
 	}
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
+	intel_connector->reprobe = intel_crt_get_edid;
 
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
drivers/gpu/drm/i915/intel_dp.c +1 -0
index 30c627c..2f4491c 100644
@@ -3657,6 +3657,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
+	intel_connector->reprobe = intel_dp_get_edid;
 
 	intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
 	if (HAS_DDI(dev)) {
drivers/gpu/drm/i915/intel_drv.h +6 -0
index 79f91f2..6ff89da 100644
@@ -175,6 +175,12 @@ struct intel_connector {
 	 * and active (i.e. dpms ON state). */
 	bool (*get_hw_state)(struct intel_connector *);
 
+	/*
+	 * Points to the corresponding get_edid() functions for
+	 * LVDS, CRT, SDVO, and DP
+	 */
+	struct edid *(*reprobe)(struct drm_connector *, struct i2c_adapter *);
+
 	/* Panel info for eDP and LVDS */
 	struct intel_panel panel;
 
drivers/gpu/drm/i915/intel_lvds.c +1 -0
index e7aa285..6a7078e 100644
@@ -1050,6 +1050,7 @@ void intel_lvds_init(struct drm_device *dev)
 	intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 	intel_encoder->get_config = intel_lvds_get_config;
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
+	intel_connector->reprobe = intel_lvds_get_edid;
 
 	intel_connector_attach_encoder(intel_connector, intel_encoder);
 	intel_encoder->type = INTEL_OUTPUT_LVDS;
drivers/gpu/drm/i915/intel_sdvo.c +4 -0
index beb40e5..2083993 100644
@@ -2420,6 +2420,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 	}
 
 	intel_connector = &intel_sdvo_connector->base;
+	intel_connector->reprobe = intel_sdvo_get_edid;
 	connector = &intel_connector->base;
 	if (intel_sdvo_get_hotplug_support(intel_sdvo) &
 		intel_sdvo_connector->output_flag) {
@@ -2462,6 +2463,7 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
 		return false;
 
 	intel_connector = &intel_sdvo_connector->base;
+	intel_connector->reprobe = intel_sdvo_get_edid;
 	connector = &intel_connector->base;
 	encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
 	connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
@@ -2502,6 +2504,7 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
 		return false;
 
 	intel_connector = &intel_sdvo_connector->base;
+	intel_connector->reprobe = intel_sdvo_get_edid;
 	connector = &intel_connector->base;
 	intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 	encoder->encoder_type = DRM_MODE_ENCODER_DAC;
@@ -2535,6 +2538,7 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 		return false;
 
 	intel_connector = &intel_sdvo_connector->base;
+	intel_connector->reprobe = intel_sdvo_get_edid;
 	connector = &intel_connector->base;
 	encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
 	connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
Signature · 1 line
1.8.5.2.229.g4448466
#5 lore raw
In reply to Ramkumar Ramachandra

[Forgot to CC]

Quoted 27 lines · Ramkumar Ramachandra

Hi Chris et al,

I got this far with creating a generic interface for various get_edid() functions, but I'm stuck now. Where do I get the specific i2c_adapter from?

I hope the series is okay otherwise.

Thanks.

Ramkumar Ramachandra (4):
drm/i915: add support for vga_switcheroo reprobe drm/i915: factor out intel_lvds_get_edid() drm/i915: change intel_sdvo_get_edid() prototype drm/i915: introduce intel_connector->reprobe

 drivers/gpu/drm/i915/i915_dma.c   |   8 ++-
 drivers/gpu/drm/i915/intel_crt.c  |   1 +
 drivers/gpu/drm/i915/intel_dp.c   |   1 +
 drivers/gpu/drm/i915/intel_drv.h  |   6 +++
 drivers/gpu/drm/i915/intel_lvds.c | 101 ++++++++++++++++++++++----------------
 drivers/gpu/drm/i915/intel_sdvo.c |  17 ++++---
 6 files changed, 84 insertions(+), 50 deletions(-)

--
1.8.5.2.229.g4448466