Skip to contentSkip to conversation

perf, tools: Fix --delay option in stat man page

PATCH In review Andi Kleen 2 participants 3 messages Jan 9, 2014 – Jan 11, 2014 perf events

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/2 perf, tools: Fix --delay option in stat man page

From: Andi Kleen <[email protected]>

The --delay option was documented as --initial-delay in the perf stat manpage. Fix this.

---
 tools/perf/Documentation/perf-stat.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/Documentation/perf-stat.txt +1 -1
index 80c7da6..29ee857 100644
@@ -133,7 +133,7 @@ use --per-core in addition to -a. (system-wide).  The output includes the
 core number and the number of online logical processors on that physical processor.
 
 -D msecs::
---initial-delay msecs::
+--delay msecs::
 After starting the program, wait msecs before measuring. This is useful to
 filter out the startup phase of the program, which is often very different.
 
Signature · 1 line
1.8.3.1
author
#1 lore raw

PATCH 2/2 perf, tools: Add --delay support to perf record v2

From: Andi Kleen <[email protected]>

perf stat has a --delay option to delay measuring the workload. This is useful to skip measuring the startup phase of the program, which is often very different from the main workload.

The same is useful for perf record when sampling. Add --delay to perf record too. -D was already taken for record, so there is only a long option.

v2: Don't disable group members (Namhyung Kim)

---
 tools/perf/Documentation/perf-record.txt | 4 ++++
 tools/perf/builtin-record.c              | 9 ++++++++-
 tools/perf/perf.h                        | 1 +
 tools/perf/util/evsel.c                  | 3 ++-
 4 files changed, 15 insertions(+), 2 deletions(-)
tools/perf/Documentation/perf-record.txt +4 -0
index 43b42c4..e349151 100644
@@ -207,6 +207,10 @@ Force the use of per-cpu mmaps.  By default, when tasks are specified (i.e. -p,
 forces per-cpu mmaps.  A side-effect of that is that inheritance is
 automatically enabled.  Add the -i option also to disable inheritance.
 
+--delay msecs::
+After starting the program, wait msecs before measuring. This is useful to
+filter out the startup phase of the program, which is often very different.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
tools/perf/builtin-record.c +8 -1
index 7c8020a..110158e 100644
@@ -506,7 +506,7 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 	 * (apart from group members) have enable_on_exec=1 set,
 	 * so don't spoil it by prematurely enabling them.
 	 */
-	if (!target__none(&opts->target))
+	if (!target__none(&opts->target) && !opts->initial_delay)
 		perf_evlist__enable(evsel_list);
 
 	/*
@@ -515,6 +515,11 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 	if (forks)
 		perf_evlist__start_workload(evsel_list);
 
+	if (opts->initial_delay) {
+		usleep(opts->initial_delay * 1000);
+		perf_evlist__enable(evsel_list);
+	}
+
 	for (;;) {
 		int hits = rec->samples;
 
@@ -890,6 +895,8 @@ const struct option record_options[] = {
 		    "sample transaction flags (special events only)"),
 	OPT_BOOLEAN(0, "force-per-cpu", &record.opts.target.force_per_cpu,
 		    "force the use of per-cpu mmaps"),
+	OPT_UINTEGER(0, "delay", &record.opts.initial_delay,
+		  "ms to wait before starting measurement after program start"),
 	OPT_END()
 };
 
tools/perf/perf.h +1 -0
index b079304..d052f1d 100644
@@ -268,6 +268,7 @@ struct perf_record_opts {
 	u64	     user_interval;
 	u16	     stack_dump_size;
 	bool	     sample_transaction;
+	unsigned     initial_delay;
 };
 
 #endif
tools/perf/util/evsel.c +2 -1
index 46dd4c2..539b014 100644
@@ -696,7 +696,8 @@ void perf_evsel__config(struct perf_evsel *evsel,
 	 * Setting enable_on_exec for independent events and
 	 * group leaders for traced executed by perf.
 	 */
-	if (target__none(&opts->target) && perf_evsel__is_group_leader(evsel))
+	if (target__none(&opts->target) && perf_evsel__is_group_leader(evsel) &&
+		!opts->initial_delay)
 		attr->enable_on_exec = 1;
 }
 
Signature · 1 line
1.8.3.1
#2 lore raw

Re: [PATCH 2/2] perf, tools: Add --delay support to perf record v2

Quoted 48 lines · Andi Kleen

From: Andi Kleen <[email protected]>

perf stat has a --delay option to delay measuring the workload. This is useful to skip measuring the startup phase of the program, which is often very different from the main workload.

The same is useful for perf record when sampling. Add --delay to perf record too. -D was already taken for record, so there is only a long option.

v2: Don't disable group members (Namhyung Kim)

---
 tools/perf/Documentation/perf-record.txt | 4 ++++
 tools/perf/builtin-record.c              | 9 ++++++++-
 tools/perf/perf.h                        | 1 +
 tools/perf/util/evsel.c                  | 3 ++-
 4 files changed, 15 insertions(+), 2 deletions(-)
tools/perf/Documentation/perf-record.txt +4 -0
index 43b42c4..e349151 100644
@@ -207,6 +207,10 @@ Force the use of per-cpu mmaps.  By default, when tasks are specified (i.e. -p,
 forces per-cpu mmaps.  A side-effect of that is that inheritance is
 automatically enabled.  Add the -i option also to disable inheritance.
 
+--delay msecs::
+After starting the program, wait msecs before measuring. This is useful to
+filter out the startup phase of the program, which is often very different.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
tools/perf/builtin-record.c +1 -1
index 7c8020a..110158e 100644
@@ -506,7 +506,7 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 	 * (apart from group members) have enable_on_exec=1 set,
 	 * so don't spoil it by prematurely enabling them.
 	 */
-	if (!target__none(&opts->target))
+	if (!target__none(&opts->target) && !opts->initial_delay)
 		perf_evlist__enable(evsel_list);
 
 	/*

tools/perf/builtin-record.c static int __cmd_record(struct perf_record *rec, int argc, const char **argv) · line 522

Quoted 8 lines
tools/perf/builtin-record.c +5 -0
@@ -515,6 +515,11 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
 	if (forks)
 		perf_evlist__start_workload(evsel_list);
 
+	if (opts->initial_delay) {
+		usleep(opts->initial_delay * 1000);
+		perf_evlist__enable(evsel_list);
+	}
+

evsel_list no longer works due to:
6346015 perf record: Remove old evsel_list usage

jirka