wandboard: set PREFERRED_VERSION to 3.0.35
PATCH 1/2 wandboard: set PREFERRED_VERSION to 3.0.35
Set the PREFERRED_VERSION for the Linux kernel to 3.0.35. Later kernel recipes may be used by edting the file conf/machine/include/wandboard.inc and commenting out the line:
PREFERRED_VERSION_linux-wandboard ?= 3.0.35
--- conf/machine/include/wandboard.inc | 1 + 1 file changed, 1 insertion(+)
conf/machine/include/wandboard.inc +1 -0
@@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc include conf/machine/include/tune-cortexa9.inc PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard" +PREFERRED_VERSION_linux-wandboard ?= "3.0.35" SERIAL_CONSOLE = "115200 ttymxc0"
Signature · 1 line
1.7.9.5
PATCH 2/2 linux-wandboard: Add recipes for 3.10.17-beta kernel
Adding recipes for early 3.10.17 kernel support for Wandboard. The current branch is unchanged from the Freescale 3.10.17_beta branch.
There is currently no device tree support for Wandboard Quad.
--- .../linux/linux-wandboard-3.10.17/defconfig | 332 ++++++++++++++++++++ recipes-kernel/linux/linux-wandboard_3.10.17.bb | 15 + 2 files changed, 347 insertions(+) create mode 100644 recipes-kernel/linux/linux-wandboard-3.10.17/defconfig create mode 100644 recipes-kernel/linux/linux-wandboard_3.10.17.bb
recipes-kernel/linux/linux-wandboard-3.10.17/defconfig new file +332 -0
@@ -0,0 +1,332 @@ +CONFIG_KERNEL_LZO=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_GPIO_PCA953X=y +CONFIG_ARCH_MXC=y +CONFIG_MXC_DEBUG_BOARD=y +CONFIG_MACH_IMX51_DT=y +CONFIG_MACH_EUKREA_CPUIMX51SD=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +CONFIG_SOC_VF610=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SMP=y +CONFIG_VMSPLIT_2G=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_ARM_IMX6_CPUFREQ=y +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_BINFMT_MISC=m +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_NETFILTER=y +CONFIG_VLAN_8021Q=y +CONFIG_CAN=y +CONFIG_CAN_FLEXCAN=y +CONFIG_CFG80211=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CMA=y +CONFIG_CMA_SIZE_MBYTES=256 +CONFIG_IMX_WEIM=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +CONFIG_PATA_IMX=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_ATH_CARDS=y +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_IMX=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_EGALAX=y +CONFIG_TOUCHSCREEN_ELAN=y +CONFIG_TOUCHSCREEN_MAX11801=y +CONFIG_TOUCHSCREEN_MC13783=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_MMA8450=y +CONFIG_INPUT_ISL29023=y +CONFIG_SERIO_SERPORT=m +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_FSL_OTP=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m +CONFIG_I2C_IMX=y +CONFIG_SPI=y +CONFIG_SPI_IMX=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_SABRESD_MAX8903=y +CONFIG_IMX6_USB_CHARGER=y +CONFIG_SENSORS_MAX17135=y +CONFIG_SENSORS_MAG3110=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_IMX_THERMAL=y +CONFIG_DEVICE_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_MFD_DA9052_I2C=y +CONFIG_MFD_MC13XXX_SPI=y +CONFIG_MFD_MC13XXX_I2C=y +CONFIG_MFD_MAX17135=y +CONFIG_MFD_SI476X_CORE=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_MC13783=y +CONFIG_REGULATOR_MC13892=y +CONFIG_REGULATOR_MAX17135=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_VIDEO_V4L2_INT_DEVICE=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MXC_OUTPUT=y +CONFIG_VIDEO_MXC_CAPTURE=m +CONFIG_VIDEO_MXC_CSI_CAMERA=m +CONFIG_MXC_CAMERA_OV5640=m +CONFIG_MXC_CAMERA_OV5642=m +CONFIG_MXC_CAMERA_OV5640_MIPI=m +CONFIG_MXC_TVIN_ADV7180=m +CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m +CONFIG_VIDEO_MXC_IPU_OUTPUT=y +CONFIG_VIDEO_MXC_PXP_V4L2=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_MX3=y +CONFIG_RADIO_SI476X=y +CONFIG_SOC_CAMERA_OV2640=y +CONFIG_DRM=y +CONFIG_DRM_VIVANTE=y +CONFIG_FB=y +CONFIG_FB_MXS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_FB_MXC_SYNC_PANEL=y +CONFIG_FB_MXC_LDB=y +CONFIG_FB_MXC_MIPI_DSI=y +CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y +CONFIG_FB_MXC_HDMI=y +CONFIG_FB_MXC_EINK_PANEL=y +CONFIG_FB_MXS_SII902X=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_CS42888=y +CONFIG_SND_SOC_IMX_WM8962=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_SPDIF=y +CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SOC_IMX_HDMI=y +CONFIG_SND_SOC_IMX_SI476X=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_PHY=y +CONFIG_USB_MXS_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +CONFIG_MXC_IPU=y +CONFIG_MXC_GPU_VIV=y +CONFIG_MXC_ASRC=y +CONFIG_MXC_MIPI_CSI2=y +CONFIG_MXC_MLB150=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_MC13XXX=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +CONFIG_DMADEVICES=y +CONFIG_MXC_PXP_V2=y +CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y +CONFIG_STAGING=y +CONFIG_COMMON_CLK_DEBUG=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_IMX=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +CONFIG_SECURITYFS=y +CONFIG_CRYPTO_USER=y +CONFIG_CRYPTO_CCM=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y +CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=y +CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=y +CONFIG_CRC_CCITT=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m
recipes-kernel/linux/linux-wandboard_3.10.17.bb new file +15 -0
@@ -0,0 +1,15 @@ +# adapted from linux-imx.inc, copyright (C) 2012-2013 O.S. Systems Software LTDA +# Released under the MIT license (see COPYING.MIT for the terms) + +include linux-wandboard.inc +require recipes-kernel/linux/linux-dtb.inc + +DEPENDS += "lzop-native bc-native" + +# Wandboard branch - based on 3.10.17_1.0.0_beta from Freescale git +SRCBRANCH = "wandboard_imx_3.10.17_1.0.0_beta" +SRCREV = "319845263e5483ee2fd2b3ddcf4e969cbbb5ffd4" +LOCALVERSION = "-1.0.0-wandboard" + + +COMPATIBLE_MACHINE = "(wandboard)"
Signature · 1 line
1.7.9.5
Quoted 10 lines
-----Original Message-----
From: [email protected] [mailto:meta-freescale- [email protected]] On Behalf Of John Weber
Sent: Friday, January 10, 2014 8:13 PM
To: [email protected]
Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: setPREFERRED_VERSIONto 3.0.35
Quoted 2 lines
Set the
PREFERRED_VERSIONfor the Linux kernel to 3.0.35. Later kernel recipes may be used by edting the file conf/machine/include/wandboard.inc
*editing*
Is it important to say why would I want to use the old version?
Daiane
Quoted 30 lines
and commenting out the line:
PREFERRED_VERSION_linux-wandboard ?= 3.0.35
Signed-off-by John Weber <[email protected]>--- conf/machine/include/wandboard.inc | 1 + 1 file changed, 1 insertion(+)conf/machine/include/wandboard.inc +0
-0@@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc includeconf/machine/include/tune-cortexa9.inc
PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard"
+PREFERRED_VERSION_linux-wandboard ?= "3.0.35"
SERIAL_CONSOLE= "115200 ttymxc0"--
1.7.9.5_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
Hi Daiane -
Quoted 9 lines · On 1/13/14 6:31 AM, [email protected] wrote:
Quoted 9 lines
-----Original Message-----
From: [email protected] [mailto:meta-freescale- [email protected]] On Behalf Of John Weber
Sent: Friday, January 10, 2014 8:13 PM
To: [email protected]
Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: setPREFERRED_VERSIONto 3.0.35
Quoted 8 lines
Quoted 2 lines
Set the
PREFERRED_VERSIONfor the Linux kernel to 3.0.35. Later kernel recipes may be used by edting the file conf/machine/include/wandboard.inc*editing*
Is it important to say why would I want to use the old version?
Daiane
The intent of this patch is to preserve the use of the stable kernel once a later, but unstable, kernel recipe is introduced. With this patch I also sent a patch for 3.10.17_beta for people to start playing with on Wandboard. I wouldn't want that to be the preferred version, but if developers want to start with it then they can do so by uncommenting the line in the machine/conf file.
Quoted 30 lines
Quoted 30 lines
and commenting out the line:
PREFERRED_VERSION_linux-wandboard ?= 3.0.35
Signed-off-by John Weber <[email protected]>--- conf/machine/include/wandboard.inc | 1 + 1 file changed, 1 insertion(+)conf/machine/include/wandboard.inc +0
-0@@ -4,6 +4,7 @@ include conf/machine/include/imx-base.inc includeconf/machine/include/tune-cortexa9.inc
PREFERRED_PROVIDER_virtual/kernel ?= "linux-wandboard"
+PREFERRED_VERSION_linux-wandboard ?= "3.0.35"
SERIAL_CONSOLE= "115200 ttymxc0"--
1.7.9.5_______________________________________________
meta-freescale mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-freescale
Quoted 22 lines · John Weber
Hi Daiane -
Quoted 17 lines · On 1/13/14 6:31 AM, [email protected] wrote:
-----Original Message-----
Quoted 11 lines
From: [email protected] [mailto:meta-freescale- [email protected]] On Behalf Of John Weber
Sent: Friday, January 10, 2014 8:13 PM
To: [email protected]
Subject: [meta-freescale] [meta-fsl-arm-extra][PATCH 1/2] wandboard: setPREFERRED_VERSIONto 3.0.35Set the
PREFERRED_VERSIONfor the Linux kernel to 3.0.35. Later kernel recipes may be used by edting the file conf/machine/include/ wandboard.inc*editing*
Is it important to say why would I want to use the old version?
Quoted 8 lines
Quoted 3 lines
Daiane
The intent of this patch is to preserve the use of the stable kernel
once a later, but unstable, kernel recipe is introduced. With this patch I also sent a patch for 3.10.17_beta for people to start playing with on Wandboard. I wouldn't want that to be the preferred version, but if developers want to start with it then they can do so by uncommenting the line in the machine/conf file.
What Daiane meant to say is it is important to explain it in the commit log ;-)
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
Hi Otavio,
Set the PREFERRED_VERSION for the Linux kernel to 3.0.35. Later kernel recipes may be used by edting the file conf/machine/include/wandboard.inc
*editing*
Is it important to say why would I want to use the old version?
Daiane
The intent of this patch is to preserve the use of the stable kernel once a later, but unstable, kernel recipe is introduced. With this patch I also sent a patch for 3.10.17_beta for people to start playing with on Wandboard. I wouldn't want that to be the preferred version, but if developers want to start with it then they can do so by uncommenting the line in the machine/conf file. What Daiane meant to say is it is important to explain it in the commit log ;-)
Not very important, but I like to add more information than strictly necessary because these commit logs are a form of documentation. This comment is probably better suited to be in the patch adding 3.10.17_beta, so I can rework the commit logs and send a V2.