driver/memory:Move Freescale IFC driver to a common driver
PATCH v2 1/2 driver/memory:Move Freescale IFC driver to a common driver
Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes.
Also remove module_platform_driver() and instead call platform_driver_register() from subsys_initcall() to make sure this module has been loaded before MTD partition parsing starts.
---
Changes for v2:
- Move fsl_ifc in driver/memory
arch/powerpc/sysdev/Makefile | 1 -
drivers/memory/Makefile | 1 +
{arch/powerpc/sysdev => drivers/memory}/fsl_ifc.c | 8 ++++++--
drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
.../include/asm => include/linux}/fsl_ifc.h | 0
5 files changed, 8 insertions(+), 4 deletions(-)
rename {arch/powerpc/sysdev => drivers/memory}/fsl_ifc.c (98%)
rename {arch/powerpc/include/asm => include/linux}/fsl_ifc.h (100%)arch/powerpc/sysdev/Makefile +0 -1
@@ -21,7 +21,6 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o -obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
drivers/memory/Makefile +1 -0
@@ -6,6 +6,7 @@ ifeq ($(CONFIG_DDR),y) obj-$(CONFIG_OF) += of_memory.o endif obj-$(CONFIG_TI_EMIF) += emif.o +obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o
drivers/memory/fsl_ifc.c renamed from arch/powerpc/sysdev/fsl_ifc.c +6 -2
@@ -30,8 +30,8 @@#include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/fsl_ifc.h> #include <asm/prom.h> -#include <asm/fsl_ifc.h> struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;EXPORT_SYMBOL (fsl_ifc_ctrl_dev);
@@ -299,7 +299,11 @@ static struct platform_driver fsl_ifc_ctrl_driver = { .remove = fsl_ifc_ctrl_remove, }; -module_platform_driver (fsl_ifc_ctrl_driver); +static int __init fsl_ifc_init (void ) +{ +return platform_driver_register (&fsl_ifc_ctrl_driver); +} +subsys_initcall (fsl_ifc_init);MODULE_LICENSE ("GPL" );MODULE_AUTHOR ("Freescale Semiconductor" );
drivers/mtd/nand/fsl_ifc_nand.c +1 -1
@@ -30,7 +30,7 @@#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand_ecc.h> -#include <asm/fsl_ifc.h> +#include <linux/fsl_ifc.h> #define FSL_IFC_V1_1_0 0x01010000#define ERR_BYTE 0xFF/* Value returned for read
include/linux/fsl_ifc.h renamed from arch/powerpc/include/asm/fsl_ifc.h +0 -0
Signature · 1 line
1.7.9.5
Quoted 9 lines · Prabhakar Kushwaha
Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes.
Also remove
module_platform_driver()and instead callplatform_driver_register()fromsubsys_initcall()to make sure this module has been loaded before MTD partition parsing starts.Signed-off-by Prabhakar Kushwaha <[email protected]>
provided that you also move the binding from powerpc/fsl/ifc.txt to memory/fsl-ifc.txt.