x86, microcode: Do Intel microcode revision check signed v2
PATCH 1/2 x86, microcode: Do Intel microcode revision check signed v2
From: Andi Kleen <[email protected]>
The Intel SDM Vol 3 9.11.1 Microcode update states that the update revision field is signed. However we do the comparison unsigned, as the comparison gets promoted. Change the field to be signed, so that comparision is really signed.
v2: Change field.
--- arch/x86/include/asm/microcode_intel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/include/asm/microcode_intel.h +1 -1
@@ -5,7 +5,7 @@struct microcode_header_intel {unsigned int hdrver; -unsigned int rev; +int rev;unsigned int date;unsigned int sig;unsigned int cksum;
Signature · 1 line
1.8.3.1
PATCH 2/2 x86, microcode: Add option to allow downgrading of microcode
From: Andi Kleen <[email protected]>
For testing purposes it can be useful to downgrade microcode. Normally the driver only allows upgrading.
Add a module_param (default off) that allows downgrading.
Note the module_param can currently not be set for early ucode update, only for late.
--- arch/x86/kernel/microcode_intel_lib.c | 7 +++++++ 1 file changed, 7 insertions(+)
arch/x86/kernel/microcode_intel_lib.c +7 -0
@@ -26,11 +26,16 @@#include <linux/uaccess.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <asm/microcode_intel.h> #include <asm/processor.h> #include <asm/msr.h> +static bool allow_downgrade; +module_param (allow_downgrade, bool,0644 ); +MODULE_PARM_DESC (allow_downgrade,"Allow downgrading microcode" ); +static inline int update_match_cpu (unsigned int csig,unsigned int cpf,unsigned int sig,unsigned int pf)
@@ -41,6 +46,8 @@ update_match_cpu(unsigned int csig, unsigned int cpf,int update_match_revision (struct microcode_header_intel *mc_header,int rev) { +if (allow_downgrade) +return 1 ;return (mc_header->rev <= rev) ?0 :1 ; }
Signature · 1 line
1.8.3.1
Re: [PATCH 2/2] x86, microcode: Add option to allow downgrading of microcode
Quoted 2 lines · Andi Kleen
For testing purposes it can be useful to downgrade microcode. Normally the driver only allows upgrading.
The code is not prepared to work correctly when downgrading is allowed, in the presence of shadowed microcode. When a firmware request results in more than one microcode for the same cpuid, with overlapping pf_mask, the code *depends* on the "never downgrade" logic to work.
Shadowed microcode *is* currently distributed by Intel, and as an artifact of the f-m-s grouping, it is *guaranteed* to trigger the issue. When the issue triggers, what microcode will be selected to be uploaded to the core depends *only* on the order of the microcodes in the firmware file.
I see no documentation of this fact anywhere, and it is *anything* but obvious.
That extremely obnoxious Intel microcode license forbids anyone to fix the pf_mask metadata fields to remove shadowing, so we ship that stuff as-is to in the distros. It *will* hit users.
Also, since you're going to mess with this, why don't you implement the correct semanthics for microcode with the sign bit set? Making it signed actually makes the current code behaviour worse.
Refer to: http://lkml.org/lkml/2011/3/21/522
Note that I was wrong about negative revision microcode not being found in the wild. Intel has shipped entry-level server boards with pre-release microcode several times, even on BIOS updates, and you're likely to get access to such pre-release microcode if you're dealing with Intel firmware partners that has full access to microcode updates.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh
Re: [PATCH 2/2] x86, microcode: Add option to allow downgrading of microcode
Quoted 6 lines · Henrique de Moraes Holschuh
Quoted 2 lines · Andi Kleen
For testing purposes it can be useful to downgrade microcode. Normally the driver only allows upgrading.
The code is not prepared to work correctly when downgrading is allowed, in the presence of shadowed microcode. When a firmware request results in more
As I wrote it's only for testing purposes when you know what you're doing (typically with a special micro code file)
Your whole argument is irrelevant, as it only applies to normal users who should never use this option.
Quoted 5 lines
Also, since you're going to mess with this, why don't you implement the correct semanthics for microcode with the sign bit set? Making it signed actually makes the current code behaviour worse.
Refer to: http://lkml.org/lkml/2011/3/21/522
I don't think it makes it worse. In fact I'm essentially implementing Burt's request "for explicit user action" with the new override option.
Anyways I suppose your rant killed the patch anyways. Congratulations!
-Andi
Re: [PATCH 2/2] x86, microcode: Add option to allow downgrading of microcode
Quoted 5 lines · Andi Kleen
Quoted 4 lines · Henrique de Moraes Holschuh
Quoted 2 lines · Andi Kleen
For testing purposes it can be useful to downgrade microcode. Normally the driver only allows upgrading.
Quoted 8 lines
Quoted 2 lines
The code is not prepared to work correctly when downgrading is allowed, in the presence of shadowed microcode. When a firmware request results in more
As I wrote it's only for testing purposes when you know what you're doing (typically with a special micro code file)
Your whole argument is irrelevant, as it only applies to normal users who should never use this option.
It certainly could become a lot less relevant if any indication is given to normal users that they should never enable the feature unless they really know what they're doing.
It is NOT "only for testing purposes" when that fact is written nowhere an user would see.
Quoted 8 lines
Quoted 5 lines
Also, since you're going to mess with this, why don't you implement the correct semanthics for microcode with the sign bit set? Making it signed actually makes the current code behaviour worse.
Refer to: http://lkml.org/lkml/2011/3/21/522
I don't think it makes it worse. In fact I'm essentially implementing Burt's request "for explicit user action" with the new override option.
You're correct. It doesn't make it worse, it makes it better. Your change effectively forbids loading pre-release microcode on a box which has production microcode, unless "downgrade mode" is enabled.
This is different from what Burt requested, but if you're implementing a downgrade mode, it is certainly a much better behavior.
Quoted 1 line
Anyways I suppose your rant killed the patch anyways. Congratulations!
You decided to ignore feedback you got weeks ago that required just adding a comment to the code or to the commit log to address. Whether or not you consider said feedback particularly interesting or relevant does NOT give you the right to just handwave it away only to later blame others should the patch not get accepted.
Signature · 4 lines
"One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh