iio: Add IIO_DISTANCE type
Subsystems (2)
PATCH v3 1/3 iio: Add IIO_DISTANCE type
Allow drivers to report distance values, but however it is up to drivers to set scaling for meters, kilometers, etc.
Signed-off-by Matt Ranostay <[email protected]>
--- drivers/iio/industrialio-core.c | 1 + include/linux/iio/types.h | 1 + 2 files changed, 2 insertions(+)
drivers/iio/industrialio-core.c +1 -0
@@ -70,6 +70,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_CCT] = "cct", [IIO_PRESSURE] = "pressure", [IIO_HUMIDITYRELATIVE] = "humidityrelative", + [IIO_DISTANCE] = "distance", };static const char *const iio_modifier_names[] = {
include/linux/iio/types.h +1 -0
@@ -30,6 +30,7 @@ enum iio_chan_type {IIO_CCT ,IIO_PRESSURE ,IIO_HUMIDITYRELATIVE , + IIO_DISTANCE, }; enum iio_modifier {
Signature · 6 lines
1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1391235760-32652-1-git-send-email-mranostay-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
PATCH v3 2/3 iio: Add AS3935 lightning sensor support
AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm.
Signed-off-by Matt Ranostay <[email protected]>
--- .../ABI/testing/sysfs-bus-iio-distance-as3935 | 19 + drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/distance/Kconfig | 19 + drivers/iio/distance/Makefile | 6 + drivers/iio/distance/as3935.c | 438 +++++++++++++++++++++ 6 files changed, 484 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-distance-as3935 create mode 100644 drivers/iio/distance/Kconfig create mode 100644 drivers/iio/distance/Makefile create mode 100644 drivers/iio/distance/as3935.c
Documentation/ABI/testing/sysfs-bus-iio-distance-as3935 new file +19 -0
@@ -0,0 +1,19 @@ +What /sys/bus/iio/devices/iio:deviceX/in_distance_raw +Date: January 2014 +KernelVersion: 3.15 +Contact: Matt Ranostay <[email protected]> +Description: + Get the current distance in kilometers of storm + 0 = no storm activity + 1 = storm overhead + 1-40 = distance in kilometers + 63 = out of range + +What /sys/bus/iio/devices/iio:deviceX/gain_boost +Date: January 2014 +KernelVersion: 3.15 +Contact: Matt Ranostay <[email protected]> +Description: + Show or set the gain boost of the amp, from 0-31 range. + 18 = indoors (default) + 14 = outdoors
drivers/iio/Kconfig +1 -0
@@ -63,6 +63,7 @@ source "drivers/iio/adc/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/common/Kconfig" source "drivers/iio/dac/Kconfig" +source "drivers/iio/distance/Kconfig" source "drivers/iio/frequency/Kconfig" source "drivers/iio/gyro/Kconfig" source "drivers/iio/humidity/Kconfig"
drivers/iio/Makefile +1 -0
@@ -16,6 +16,7 @@ obj-y += adc/ obj-y += amplifiers/ obj-y += common/ obj-y += dac/ +obj-y += distance/ obj-y += gyro/ obj-y += frequency/ obj-y += humidity/
drivers/iio/distance/Kconfig new file +19 -0
@@ -0,0 +1,19 @@ +# +# Distance sensors +# + +menu "Lightning sensors" + +config AS3935 + tristate "AS3935 Franklin lightning sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on SPI + help + If you say yes here you get support for the Austrian Microsystems + AS3935 lightning detection sensor. + + This driver can also be built as a module. If so, the module + will be called as3935. + +endmenu
drivers/iio/distance/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# +# Makefile for IIO distance sensors +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AS3935) += as3935.o
drivers/iio/distance/as3935.c new file +438 -0
438 lines not on this page · raw message
Signature · 6 lines
1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v3 3/3 iio:as3935: Add DT binding docs for AS3935 driver
In reply to a message not in the archiveDocument compatible string, required and optional DT properties for AS3935 chipset driver.
Signed-off-by Matt Ranostay <[email protected]>
--- .../devicetree/bindings/iio/distance/as3935.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/distance/as3935.txt
Documentation/devicetree/bindings/iio/distance/as3935.txt new file +25 -0
@@ -0,0 +1,25 @@ +Austrian Microsystems AS3935 Franklin lightning sensor device driver + +Required properties: + - compatible: must be "ams,as3935" + - reg: SPI chip select number for the device + - spi-cpha: SPI Mode 1 + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Optional properties: + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15. + Range of 0 to 120 pF, 8pF steps. This will require using the calibration + data from the manufacturer. + + +Example: + +as3935@0 { + compatible = "ams,as3935"; + reg = <0>; + spi-cpha; + interrupt-parent = <&gpio1>; + interrupts = <16 1>; + ams,tune-cap = /bits/ 8 <10>; +};
Signature · 6 lines
1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html