hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
Guenter Roeck
maintainerPATCH v2 1/1 hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
Simplify code, reduce code size, and attach hwmon attributes to hwmon device.
Signed-off-by Guenter Roeck <[email protected]>
---
v2: Use PTR_ERR_OR_ZERO in probe function
drivers/hwmon/adm1021.c | 70 +++++++++++++++-------------------------------- 1 file changed, 22 insertions(+), 48 deletions(-)
drivers/hwmon/adm1021.c +22 -48
@@ -79,9 +79,11 @@ enum chips {/* Each client has this additional data */ struct adm1021_data { -struct device *hwmon_dev; +struct i2c_client *client;enum chips type; +const struct attribute_group *groups[3 ]; +struct mutex update_lock;char valid;/* !=0 if following fields are valid */ char low_power;/* !=0 if device in low power mode */
@@ -101,7 +103,6 @@ static int adm1021_probe(struct i2c_client *client,static int adm1021_detect (struct i2c_client *client,struct i2c_board_info *info);static void adm1021_init_client (struct i2c_client *client); -static int adm1021_remove (struct i2c_client *client);static struct adm1021_data *adm1021_update_device (struct device *dev);/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
@@ -128,7 +129,6 @@ static struct i2c_driver adm1021_driver = { .name = "adm1021", }, .probe = adm1021_probe, - .remove = adm1021_remove, .id_table = adm1021_id, .detect = adm1021_detect, .address_list = normal_i2c,
@@ -182,8 +182,8 @@ static ssize_t set_temp_max(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; -struct i2c_client *client =to_i2c_client (dev); -struct adm1021_data *data =i2c_get_clientdata (client); +struct adm1021_data *data =dev_get_drvdata (dev); +struct i2c_client *client = data->client;long temp;int err;
@@ -207,8 +207,8 @@ static ssize_t set_temp_min(struct device *dev, const char *buf, size_t count) { int index = to_sensor_dev_attr(devattr)->index; -struct i2c_client *client =to_i2c_client (dev); -struct adm1021_data *data =i2c_get_clientdata (client); +struct adm1021_data *data =dev_get_drvdata (dev); +struct i2c_client *client = data->client;long temp;int err;
@@ -238,8 +238,8 @@ static ssize_t set_low_power(struct device *dev,struct device_attribute *devattr, const char *buf, size_t count) { - struct i2c_client *client = to_i2c_client(dev); -struct adm1021_data *data =i2c_get_clientdata (client); + struct adm1021_data *data = dev_get_drvdata(dev); +struct i2c_client *client = data->client;char low_power;unsigned long val;int err;
@@ -412,15 +412,15 @@ static int adm1021_detect(struct i2c_client *client,static int adm1021_probe (struct i2c_client *client,const struct i2c_device_id *id) { +struct device *dev = &client->dev;struct adm1021_data *data; -int err; +struct device *hwmon_dev; - data =devm_kzalloc (&client->dev,sizeof (struct adm1021_data ), -GFP_KERNEL ); + data =devm_kzalloc (dev,sizeof (struct adm1021_data ),GFP_KERNEL );if (!data)return -ENOMEM ; -i2c_set_clientdata (client, data); + data->client = client; data->type = id->driver_data;mutex_init (&data->update_lock);
@@ -428,29 +428,14 @@ static int adm1021_probe(struct i2c_client *client,if (data->type != lm84 && !read_only)adm1021_init_client (client); -/* Register sysfs hooks */ - err =sysfs_create_group (&client->dev.kobj, &adm1021_group); -if (err) -return err; - -if (data->type != lm84) { - err =sysfs_create_group (&client->dev.kobj, &adm1021_min_group); -if (err) - goto error; - } + data->groups[0 ] = &adm1021_group; +if (data->type != lm84) + data->groups[1 ] = &adm1021_min_group; - data->hwmon_dev =hwmon_device_register (&client->dev); -if (IS_ERR (data->hwmon_dev)) { - err =PTR_ERR (data->hwmon_dev); - goto error; - } + hwmon_dev =devm_hwmon_device_register_with_groups (dev, client->name, + data, data->groups); -return 0 ; - -error: -sysfs_remove_group (&client->dev.kobj, &adm1021_min_group); -sysfs_remove_group (&client->dev.kobj, &adm1021_group); -return err; +return PTR_ERR_OR_ZERO (hwmon_dev); }static void adm1021_init_client (struct i2c_client *client)
@@ -462,21 +447,10 @@ static void adm1021_init_client(struct i2c_client *client)i2c_smbus_write_byte_data (client,ADM1021_REG_CONV_RATE_W ,0x04 ); } -static int adm1021_remove (struct i2c_client *client) -{ -struct adm1021_data *data =i2c_get_clientdata (client); - -hwmon_device_unregister (data->hwmon_dev); -sysfs_remove_group (&client->dev.kobj, &adm1021_min_group); -sysfs_remove_group (&client->dev.kobj, &adm1021_group); - -return 0 ; -} -static struct adm1021_data *adm1021_update_device (struct device *dev) { -struct i2c_client *client =to_i2c_client (dev); -struct adm1021_data *data =i2c_get_clientdata (client); +struct adm1021_data *data =dev_get_drvdata (dev); +struct i2c_client *client = data->client;mutex_lock (&data->update_lock);
@@ -484,7 +458,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) || !data->valid) {int i; -dev_dbg (&client->dev,"Starting adm1021 update\n" ); +dev_dbg (dev,"Starting adm1021 update\n" );for (i =0 ; i <2 ; i++) { data->temp[i] = 1000 *
Signature · 7 lines
1.7.9.7 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Jean Delvare
AppliedQuoted 10 lines · Guenter Roeck
Simplify code, reduce code size, and attach hwmon attributes to hwmon device.
Signed-off-by Guenter Roeck <[email protected]>---
v2: UsePTR_ERR_OR_ZEROin probe functiondrivers/hwmon/adm1021.c | 70 +++++++++++++++-------------------------------- 1 file changed, 22 insertions(+), 48 deletions(-)(...)
Applied, thanks.
Signature · 7 lines
Jean Delvare Suse L3 Support _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors