Skip to contentSkip to conversation

[meta-perl][PATCH v2 00/10]

PATCH In review Tim Orling 3 participants 26 messages Feb 3, 2014 – May 6, 2014 1 message not in the archive

lore
Share & tools
lore

Tim Orling

author
#0 lore raw

v2 cover [meta-perl][PATCH v2 00/10]

This series of recipes is the first step towards the ultimate goal of getting Slic3r to build in OE.

Original submission was missing Algorithm::Diff which Text::Diff depends on.

Resubmitted to follow Debian Perl Policy.
See 4.2 Module Package Names [http://www.debian.org/doc/packaging-manuals/perl-policy/ch-module_packages.html]

Tim Orling (10):
libmodule-metadata-perl: add 1.000019
libtext-diff-perl: add 1.41
libcapture-tiny-perl: add 0.23
libmodule-runtime-perl: add 0.013
libextutils-config-perl: add 0.007
libextutils-helpers-perl: add 0.021
libextutils-installpaths-perl: add 0.010
libmodule-build-tiny-perl: add 0.030
libextutils-cppguess-perl: add 0.07
libalgorithm-diff-perl: add 1.15

 .../libalgorithm/libalgorithm-diff-perl_1.15.bb    |   23 +++++++++
 .../libcapture/libcapture-tiny-perl_0.23.bb        |   36 +++++++++++++
 .../libextutils/libextutils-config-perl_0.007.bb   |   24 +++++++++
 .../libextutils/libextutils-cppguess-perl_0.07.bb  |   38 ++++++++++++++
 .../libextutils/libextutils-helpers-perl_0.021.bb  |   29 +++++++++++
 .../libextutils-installpaths-perl_0.010.bb         |   25 +++++++++
 .../libmodule/libmodule-build-tiny-perl_0.030.bb   |   54 ++++++++++++++++++++
 .../libmodule/libmodule-metadata-perl_1.000019.bb  |   33 ++++++++++++
 .../libmodule/libmodule-runtime-perl_0.013.bb      |   35 +++++++++++++
 .../recipes-perl/libtext/libtext-diff-perl_1.41.bb |   27 ++++++++++
 10 files changed, 324 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libalgorithm/libalgorithm-diff-perl_1.15.bb
 create mode 100644 meta-perl/recipes-perl/libcapture/libcapture-tiny-perl_0.23.bb
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-config-perl_0.007.bb
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-cppguess-perl_0.07.bb
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-helpers-perl_0.021.bb
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-installpaths-perl_0.010.bb
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-runtime-perl_0.013.bb
 create mode 100644 meta-perl/recipes-perl/libtext/libtext-diff-perl_1.41.bb
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH v2 1/10 libmodule-metadata-perl: add 1.000019

[Description from CPAN]
This module provides a standard way to gather metadata about a .pm file through (mostly) static analysis and (some) code execution. When determining the version of a module, the $VERSION assignment is "eval"ed, as is traditional in the CPAN toolchain.

---
 .../libmodule/libmodule-metadata-perl_1.000019.bb  |   33 ++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb
meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +33 -0
new file mode 100644
index 0000000..668f0c4
@@ -0,0 +1,33 @@
+SUMMARY = "Module::Metadata - Gather package and POD information from perl module files"
+DESCRIPTION = "This module provides a standard way to gather metadata about \
+a .pm files through (mostly) static analysis and (some) code execution. When \
+determining the version of a module, the $VERSION assignment is eval-ed, as \
+is traditional in the CPAN toolchain."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~ether/Module-Metadata/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://README;beginline=185;endline=190;md5=e1b24eebe5d819b40bb68ad06b72d3ee"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/E/ET/ETHER/Module-Metadata-${PV}.tar.gz"
+SRC_URI[md5sum] = "838ecf97f7daff79e0f81e104a6be823"
+SRC_URI[sha256sum] = "5afca94dc0213608101ad519eb1b25133cdc9e44c2a053a45a5a59422c2ee554"
+
+S = "${WORKDIR}/Module-Metadata-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-io-file \
+                   perl-module-data-dumper \
+                   perl-module-extutils-makemaker \
+                   perl-module-file-spec \
+                   perl-module-version \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+                   perl-module-file-path \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
#2 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Hi Tim,

The 'Metadata.pm' in libmodule-metadata-perl-native conflicted with the one in perl-native, is that ok?

$ bitbake libmodule-metadata-perl-native

WARNING: The recipe libmodule-metadata-perl-native is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
/home/jiahongxu/yocto/build-20140329-meta-perl/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/Module/Metadata.pm
Matched in manifest-x86_64-perl-native.populate_sysroot
Please verify which package should provide the above files.

//Hongxu

Quoted 48 lines · Tim Orling

[Description from CPAN]
This module provides a standard way to gather metadata about a .pm file through (mostly) static analysis and (some) code execution. When determining the version of a module, the $VERSION assignment is "eval"ed, as is traditional in the CPAN toolchain.

---
  .../libmodule/libmodule-metadata-perl_1.000019.bb  |   33 ++++++++++++++++++++
  1 file changed, 33 insertions(+)

create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +33 -0
new file mode 100644
index 0000000..668f0c4
@@ -0,0 +1,33 @@
+SUMMARY = "Module::Metadata - Gather package and POD information from perl module files"
+DESCRIPTION = "This module provides a standard way to gather metadata about \
+a .pm files through (mostly) static analysis and (some) code execution. When \
+determining the version of a module, the $VERSION assignment is eval-ed, as \
+is traditional in the CPAN toolchain."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~ether/Module-Metadata/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://README;beginline=185;endline=190;md5=e1b24eebe5d819b40bb68ad06b72d3ee"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/E/ET/ETHER/Module-Metadata-${PV}.tar.gz"
+SRC_URI[md5sum] = "838ecf97f7daff79e0f81e104a6be823"
+SRC_URI[sha256sum] = "5afca94dc0213608101ad519eb1b25133cdc9e44c2a053a45a5a59422c2ee554"
+
+S = "${WORKDIR}/Module-Metadata-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-io-file \
+                   perl-module-data-dumper \
+                   perl-module-extutils-makemaker \
+                   perl-module-file-spec \
+                   perl-module-version \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+                   perl-module-file-path \
+"
+
+BBCLASSEXTEND = "native"
author
#3 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

In reply to Tim Orling

Yes. It updates the version built into perl. I will submit a patch with insane skip.

--Tim

Quoted 67 lines · Tim Orling

[Description from CPAN]
This module provides a standard way to gather metadata about a .pm file through (mostly) static analysis and (some) code execution. When determining the version of a module, the $VERSION assignment is "eval"ed, as is traditional in the CPAN toolchain.

---
 .../libmodule/libmodule-metadata-perl_1.000019.bb  |   33
++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libmodule/

libmodule-metadata-perl_1.000019.bb

(quoted diff) +0 -0

libmodule-metadata-perl_1.000019.bb b/meta-perl/recipes-perl/libmodule/ libmodule-metadata-perl_1.000019.bb
new file mode 100644
index 0000000..668f0c4

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +1 -0
@@ -0,0 +1,33 @@
+SUMMARY = "Module::Metadata - Gather package and POD information from

perl module files"
+DESCRIPTION = "This module provides a standard way to gather metadata about \
+a .pm files through (mostly) static analysis and (some) code execution. When \
+determining the version of a module, the $VERSION assignment is eval-ed, as \

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +7 -0
+is traditional in the CPAN toolchain."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~ether/Module-Metadata/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM =

"file://README;beginline=185;endline=190;md5=e1b24eebe5d819b40bb68ad06b72d3ee"

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +2 -0
+
+SRC_URI = "

http://search.cpan.org/CPAN/authors/id/E/ET/ETHER/Module-Metadata-${PV}.tar.gz
"

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +2 -0
+SRC_URI[md5sum] = "838ecf97f7daff79e0f81e104a6be823"
+SRC_URI[sha256sum] =

"5afca94dc0213608101ad519eb1b25133cdc9e44c2a053a45a5a59422c2ee554"

meta-perl/recipes-perl/libmodule/libmodule-metadata-perl_1.000019.bb new file +18 -1
+
+S = "${WORKDIR}/Module-Metadata-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-io-file \
+                   perl-module-data-dumper \
+                   perl-module-extutils-makemaker \
+                   perl-module-file-spec \
+                   perl-module-version \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+                   perl-module-file-path \
+"
+
+BBCLASSEXTEND = "native"
--

1.7.9.5

#4 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Hi Tim,

Quoted 2 lines · On Sunday 30 March 2014 20:30:28 Tim Orling wrote:

Yes. It updates the version built into perl. I will submit a patch with insane skip.

INSANE_SKIP isn't the right fix for this - if this recipe is staging duplicate files, it should be prevented from doing that by simply deleting the files within a do_install_append.

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
author
#5 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 11 lines · Paul Eggleton

Hi Tim,

Quoted 2 lines · On Sunday 30 March 2014 20:30:28 Tim Orling wrote:

Yes. It updates the version built into perl. I will submit a patch with insane skip.

INSANE_SKIP isn't the right fix for this - if this recipe is staging duplicate
files, it should be prevented from doing that by simply deleting the files within a do_install_append.

Quoted 8 lines

Cheers,
Paul

--

Paul Eggleton
Intel Open Source Technology Centre

(1) I am thinking about dropping this patch. perl-native provides Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ, how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

--Tim

#6 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 8 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ, how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

It is also provided by perl, for target.

//Hongxu

Quoted 3 lines

--Tim

author
#7 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 7 lines · Hongxu Jia
Quoted 5 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

Quoted 10 lines
Quoted 4 lines

(2) The question is, if one wanted to build subsequent packages in-situ, how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

It is also provided by perl, for target.

//Hongxu

I am not seeing it. Am I missing something?

root@beaglebone:~# perl -mModule::Metadata

Can't locate Module/Metadata.pm in @INC (@INC contains: /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/lib/perl/5.14.3 /usr/local/lib/site_perl /usr/lib/perl/5.14.3 .).

BEGIN failed--compilation aborted.

Quoted 11 lines
Quoted 4 lines

--Tim
--

--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel

#8 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 13 lines · Tim Orling
Quoted 11 lines · Hongxu Jia
Quoted 9 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ, how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

Quoted 6 lines
Quoted 5 lines

It is also provided by perl, for target.

//Hongxu

I am not seeing it. Am I missing something?

Hi Tim,

I am afraid Module::Metadataj is not in perl by default, you need to tweak poky/meta/recipes-devtools/perl/perl_5.14.3.bb, to create a new package for Module::Metadata, you could reference what 'perl-module-cpan' did, such as:
...
PACKAGES += "perl-module-metadata" FILES_perl-module-metadata += ">>the files you need<<"
...

And add 'perl-module-metadata' to your recipes's RDEPENDS.

//Hongxu

Quoted 20 lines
root@beaglebone:~# perl -mModule::Metadata

Can't locate Module/Metadata.pm in @INC (@INC contains: /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/lib/perl/5.14.3 /usr/local/lib/site_perl /usr/lib/perl/5.14.3 .).

BEGIN failed--compilation aborted.

Quoted 9 lines
Quoted 3 lines

--Tim
--

--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel

#9 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 24 lines · Hongxu Jia
Quoted 13 lines · Tim Orling
Quoted 11 lines · Hongxu Jia
Quoted 9 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ, how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

Quoted 6 lines
Quoted 5 lines

It is also provided by perl, for target.

//Hongxu

I am not seeing it. Am I missing something?

Hi Tim,

Quoted 8 lines

I am afraid Module::Metadataj is not in perl by default, you need to tweak poky/meta/recipes-devtools/perl/perl_5.14.3.bb, to create a new package for Module::Metadata, you could reference what 'perl-module-cpan' did, such as:
...
PACKAGES += "perl-module-metadata" FILES_perl-module-metadata += ">>the files you need<<"
...

You also need tweak do_install, to install Metadata.pm from ${S} to ${D}, the default do_install did not do that.

//Hongxu

Quoted 26 lines

And add 'perl-module-metadata' to your recipes's RDEPENDS.

//Hongxu

Quoted 20 lines
root@beaglebone:~# perl -mModule::Metadata

Can't locate Module/Metadata.pm in @INC (@INC contains: /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/lib/perl/5.14.3 /usr/local/lib/site_perl /usr/lib/perl/5.14.3 .).

BEGIN failed--compilation aborted.

Quoted 9 lines
Quoted 3 lines

--Tim

Signature · 4 lines
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel
author
#10 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

--Turns out to not be quite so simple. Module::Metadata is not ever being created by perl_*.bb. This is somewhat surprising because Module::Build needs Module::Metadata and this has been missed in Cross/configure.sh-arm-linux since perl v5.13.9.
--You can verify this by running "perl -mModule::Build" on qemuarm/arm target.
--I am working on a patch for oe-core.

Quoted 74 lines · Hongxu Jia
Quoted 28 lines · Hongxu Jia
Quoted 22 lines · Tim Orling

On Sun, Apr 20, 2014 at 7:17 PM, Hongxu Jia <[email protected]> wrote:

Quoted 17 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides

Quoted 10 lines

Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ,
how to provide Module::Metadata 1.00004 on a target system, since it is only provided by perl-native?

It is also provided by perl, for target.

//Hongxu

I am not seeing it. Am I missing something?

Hi Tim,

Quoted 9 lines

I am afraid Module::Metadataj is not in perl by default, you need to tweak poky/meta/recipes-devtools/perl/perl_5.14.3.bb, to create a new package for Module::Metadata, you could reference what 'perl-module-cpan' did, such as:
...
PACKAGES += "perl-module-metadata" FILES_perl-module-metadata += ">>the files you need<<"
...

You also need tweak do_install, to install Metadata.pm from ${S} to ${D}, the default do_install did not do that.

//Hongxu

Quoted 26 lines

And add 'perl-module-metadata' to your recipes's RDEPENDS.

//Hongxu

Quoted 20 lines
root@beaglebone:~# perl -mModule::Metadata

Can't locate Module/Metadata.pm in @INC (@INC contains: /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/lib/perl/5.14.3 /usr/local/lib/site_perl /usr/lib/perl/5.14.3 .).

BEGIN failed--compilation aborted.

--Tim

Quoted 9 lines
Quoted 3 lines

--

--

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel

author
#11 lore raw

Re: [meta-perl][PATCH v2 01/10] libmodule-metadata-perl: add 1.000019

Quoted 8 lines · Tim Orling

--Turns out to not be quite so simple. Module::Metadata is not ever being created by perl_*.bb. This is somewhat surprising because Module::Build needs Module::Metadata and this has been missed in Cross/configure.sh-arm-linux since perl v5.13.9.
--You can verify this by running "perl -mModule::Build" on qemuarm/arm target.
--I am working on a patch for oe-core.

Fixed in (and this patch superseded by)
http://patches.openembedded.org/patch/71565/

Quoted 79 lines · Hongxu Jia
Quoted 76 lines · Hongxu Jia
Quoted 30 lines · Tim Orling
Quoted 24 lines

On Sun, Apr 20, 2014 at 7:17 PM, Hongxu Jia <[email protected]> wrote:

Quoted 18 lines · Tim Orling

(1) I am thinking about dropping this patch. perl-native provides

Quoted 11 lines

Module::Metadata 1.00004, so if subsequent packages are being cross-compiled I have not yet proven there is a need for the updated v1.000019 provided here.

(2) The question is, if one wanted to build subsequent packages in-situ,
how to provide Module::Metadata 1.00004 on a target system, since it is
only provided by perl-native?

It is also provided by perl, for target.

//Hongxu

I am not seeing it. Am I missing something?

Hi Tim,

Quoted 9 lines

I am afraid Module::Metadataj is not in perl by default, you need to tweak poky/meta/recipes-devtools/perl/perl_5.14.3.bb, to create a new package for Module::Metadata, you could reference what 'perl-module-cpan' did, such as:
...
PACKAGES += "perl-module-metadata" FILES_perl-module-metadata += ">>the files you need<<"
...

You also need tweak do_install, to install Metadata.pm from ${S} to ${D}, the default do_install did not do that.

//Hongxu

Quoted 26 lines

And add 'perl-module-metadata' to your recipes's RDEPENDS.

//Hongxu

Quoted 20 lines
root@beaglebone:~# perl -mModule::Metadata

Can't locate Module/Metadata.pm in @INC (@INC contains: /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/lib/perl/5.14.3 /usr/local/lib/site_perl /usr/lib/perl/5.14.3 .).

BEGIN failed--compilation aborted.

--Tim

Quoted 9 lines
Quoted 3 lines

--

--

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel

author
#12 lore raw

PATCH v2 2/10 libtext-diff-perl: add 1.41

In reply to Tim Orling

[Description from CPAN]
diff() provides a basic set of services akin to the GNU diff utility. It is not anywhere near as feature complete as GNU diff, but it is better integrated with Perl and available on all platforms. It is often faster than shelling out to a system's diff executable for small files, and generally slower on larger files.

---
 .../recipes-perl/libtext/libtext-diff-perl_1.41.bb |   27 ++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libtext/libtext-diff-perl_1.41.bb
meta-perl/recipes-perl/libtext/libtext-diff-perl_1.41.bb new file +27 -0
new file mode 100644
index 0000000..1960ee0
@@ -0,0 +1,27 @@
+SUMMARY = "Text::Diff - Perform diffs on files and record sets"
+DESCRIPTION = "diff() provides a basic set of services akin to the GNU diff \
+utility. It is not anywhere near as feature complete as GNU diff, but it is \
+better integrated with Perl and available on all platforms. It is often \
+faster than shelling out to a system's diff executable for small files, \
+and generally slower on larger files."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~ovid/Text-Diff/"
+
+LICENSE = "Artistic-1.0 | GPL-2.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=385c55653886acac3821999a3ccd17b3"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/O/OV/OVID/Text-Diff-${PV}.tar.gz"
+SRC_URI[md5sum] = "30d56e6dd5551ca16b8e16cc7299dc21"
+SRC_URI[sha256sum] = "a67f50a48e313c1680cc662109ce5f913ea71454db355d0cf4db87ac89d2d2fa"
+
+S = "${WORKDIR}/Text-Diff-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " libalgorithm-diff-perl \
+                   perl-module-extutils-makemaker \
+                   perl-module-exporter \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#13 lore raw

PATCH v2 3/10 libcapture-tiny-perl: add 0.23

In reply to Tim Orling

[Description from CPAN]
Capture::Tiny provies a simple, portable way to capture
almost anything sent to STDOUT or STDERR, regardless of whether it comes from Perl, from XS code or from an external program. Optionally, output can be teed so that it is captured while being passed through to the original filehandles. Yes, it even works on Windows (usually). Stop guessing which of a dozen capturing modules to use in any particular situation and just use this one.

---
 .../libcapture/libcapture-tiny-perl_0.23.bb        |   36 ++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libcapture/libcapture-tiny-perl_0.23.bb
meta-perl/recipes-perl/libcapture/libcapture-tiny-perl_0.23.bb new file +36 -0
new file mode 100644
index 0000000..b2f1ff9
@@ -0,0 +1,36 @@
+SUMMARY = "Capture::Tiny - Capture STDOUT and STDERR from Perl, XS or external programs."
+DESCRIPTION = "Capture::Tiny provies a simple, portable way to capture \
+almost anything sent to STDOUT or STDERR, regardless of whether it comes \
+from Perl, from XS code or from an external program. Optionally, output can \
+be teed so that it is captured while being passed through to the original \
+filehandles. Yes, it even works on Windows (usually). Stop guessing which of \
+a dozen capturing modules to use in any particular situation and just use \
+this one."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~dagolden/Capture-Tiny/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=37a4918a30ace24395020e5b8c03b83f"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/D/DA/DAGOLDEN/Capture-Tiny-${PV}.tar.gz"
+SRC_URI[md5sum] = "7c6f63671802d004c0df5dbcba93e5b4"
+SRC_URI[sha256sum] = "427814015824014b41f666c16afadab0ea551db946e494fdfbc59c44c9569bdf"
+
+S = "${WORKDIR}/Capture-Tiny-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-scalar-util \
+                   perl-module-io-file \
+                   perl-module-extutils-makemaker \
+                   perl-module-file-spec \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+                   perl-module-lib \
+                   perl-module-build \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#14 lore raw

PATCH v2 4/10 libmodule-runtime-perl: add 0.013

In reply to Tim Orling

[Description from CPAN]
The functions exported by this module deal with runtime handling of Perl modules, which are normally handled at compile time. This module avoids using any other modules, so that it can be used in low-level infrastructure.

---
 .../libmodule/libmodule-runtime-perl_0.013.bb      |   35 ++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-runtime-perl_0.013.bb
meta-perl/recipes-perl/libmodule/libmodule-runtime-perl_0.013.bb new file +35 -0
new file mode 100644
index 0000000..58b72af
@@ -0,0 +1,35 @@
+SUMMARY = "Module::Runtime - runtime module handling"
+DESCRIPTION = "The functions exported by this module deal with runtime \
+handling of Perl modules, which are normally handled at compile time. This \
+module avoids using any other modules, so that it can be used in low-level \
+infrastructure. \
+The parts of this module that work with module names apply the same syntax \
+that is used for barewords in Perl source. In principle this syntax can vary \
+between versions of Perl, and this module applies the syntax of the Perl on \
+which it is running. In practice the usable syntax hasn't changed yet, but \
+there's a good chance of it changing in Perl 5.18. \
+The functions of this module whose purpose is to load modules include \
+workarounds for three old Perl core bugs regarding require. These workarounds \
+are applied on any Perl version where the bugs exist, except for a case where \
+one of the bugs cannot be adequately worked around in pure Perl."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~zefram/Module-Runtime/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://README;beginline=42;endline=43;md5=62e24a93342fede7221d66335c716f34"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/Z/ZE/ZEFRAM/Module-Runtime-${PV}.tar.gz"
+SRC_URI[md5sum] = "62b88b1f5f0e975a5d7c80cd46167b97"
+SRC_URI[sha256sum] = "ec37e03d90dc905679dab62a82f42cf0897ed79244b87fd9d531438dc3c31023"
+
+S = "${WORKDIR}/Module-Runtime-${PV}"
+
+inherit cpan_build
+
+RDEPENDS_${PN} = " perl-module-test-more \
+                   perl-module-strict \
+                   perl-module-build \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#15 lore raw

PATCH v2 5/10 libextutils-config-perl: add 0.007

In reply to Tim Orling

[Description from CPAN]
ExtUtils::Config is an abstraction around the %Config hash.

---
 .../libextutils/libextutils-config-perl_0.007.bb   |   24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-config-perl_0.007.bb
meta-perl/recipes-perl/libextutils/libextutils-config-perl_0.007.bb new file +24 -0
new file mode 100644
index 0000000..8276d28
@@ -0,0 +1,24 @@
+SUMMARY = "ExtUtils::Config - A wrapper for perl's configuration"
+DESCRIPTION = "ExtUtils::Config is an abstraction around the %Config hash."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/ExtUtils-Config/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=b1b813683bd988732e7fd6a796bf7f47"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/ExtUtils-Config-${PV}.tar.gz"
+SRC_URI[md5sum] = "2829c0dfa8a7e51b3f582efbee4bb128"
+SRC_URI[sha256sum] = "2c1465078b876fd16a90507092805265528c2532d4937b03547a6dbdb8ac0eef"
+
+S = "${WORKDIR}/ExtUtils-Config-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-extutils-makemaker \
+                   perl-module-data-dumper \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#16 lore raw

PATCH v2 6/10 libextutils-helpers-perl: add 0.021

In reply to Tim Orling

[Description from CPAN]
This module provides various portable helper function for module building modules.

---
 .../libextutils/libextutils-helpers-perl_0.021.bb  |   29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-helpers-perl_0.021.bb
meta-perl/recipes-perl/libextutils/libextutils-helpers-perl_0.021.bb new file +29 -0
new file mode 100644
index 0000000..20f3283
@@ -0,0 +1,29 @@
+SUMMARY = "ExtUtils::Helpers - Various portability utilities for module builders"
+DESCRIPTION = "This module provides various portable helper function for module building modules."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/ExtUtils-Helpers/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=307057ce232899f5caa8858560c7274b"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/ExtUtils-Helpers-${PV}.tar.gz"
+SRC_URI[md5sum] = "94aa8eaf92def26d9af0cb25fcb1570f"
+SRC_URI[sha256sum] = "26b85077f4197b30e62ffec87d3f78111522619d62858d2ab45a64687351892a"
+
+S = "${WORKDIR}/ExtUtils-Helpers-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-file-copy \
+                   perl-module-extutils-makemaker \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-text-parsewords \
+                   perl-module-module-load \
+                   perl-module-file-temp \
+                   perl-module-file-spec-functions \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#17 lore raw

PATCH v2 7/10 libextutils-installpaths-perl: add 0.010

In reply to Tim Orling

[Description from CPAN]
This module tries to make install path resolution as easy as possible.

---
 .../libextutils-installpaths-perl_0.010.bb         |   25 ++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-installpaths-perl_0.010.bb
meta-perl/recipes-perl/libextutils/libextutils-installpaths-perl_0.010.bb new file +25 -0
new file mode 100644
index 0000000..4cfdfc4
@@ -0,0 +1,25 @@
+SUMMARY = "ExtUtils::InstallPaths - Build.PL install path logic made easy"
+DESCRIPTION = "This module tries to make install path resolution as easy \
+as possible."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/ExtUtils-InstallPaths/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=15bbcc2806d297df9e944b8955b38d82"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/ExtUtils-InstallPaths-${PV}.tar.gz"
+SRC_URI[md5sum] = "f0b00cc6c04653588a6298fa1f16c07f"
+SRC_URI[sha256sum] = "d14cbff118e467900c2c488b55b83ef697d6eb1b8f592c0521f1d82848bf2156"
+
+S = "${WORKDIR}/ExtUtils-InstallPaths-${PV}"
+
+inherit cpan
+
+RDEPENDS_${PN} = " perl-module-extutils-makemaker \
+                   perl-module-data-dumper \
+                   perl-module-test-more \
+                   perl-module-file-temp \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#18 lore raw

PATCH v2 8/10 libmodule-build-tiny-perl: add 0.030

In reply to Tim Orling

[Description from CPAN]
Many Perl distributions use a Build.PL file instead of a Makefile.PL file to drive distribution configuration, build, test and installation. Traditionally, Build.PL uses Module::Build as the underlying build system. This module provides a simple, lightweight, drop-in replacement.

---
 .../libmodule/libmodule-build-tiny-perl_0.030.bb   |   54 ++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb new file +54 -0
new file mode 100644
index 0000000..fadd9c7
@@ -0,0 +1,54 @@
+SUMMARY = "Module::Build::Tiny - A tiny replacement for Module::Build"
+DESCRIPTION = "Many Perl distributions use a Build.PL file instead of a \
+Makefile.PL file to drive distribution configuration, build, test and \
+installation. Traditionally, Build.PL uses Module::Build as the underlying \
+build system. This module provides a simple, lightweight, drop-in replacement. \
+Whereas Module::Build has over 6,700 lines of code; this module has less than \
+120, yet supports the features needed by most distributions."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/Module-Build-Tiny/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=aaca61412962cf972aec0cdad99d0a84"
+
+DEPENDS = "libextutils-config-native libextutils-helpers-native libextutils-installpaths-native"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/Module-Build-Tiny-${PV}.tar.gz"
+SRC_URI[md5sum] = "1c54bf4c602eec87f98950314699402e"
+SRC_URI[sha256sum] = "dfd418ad0e8290cf645ab11be209a1bf6865e5a562c5a1592da99d5fd24718a8"
+
+S = "${WORKDIR}/Module-Build-Tiny-${PV}"
+
+inherit cpan_build
+
+do_install () {
+        cpan_build_do_install
+}
+
+RDEPENDS_${PN} = " libextutils-config-perl \
+                   libextutils-helpers-perl \
+                   libextutils-installpaths-perl \
+                   perl-module-xsloader \
+                   perl-module-file-spec \
+                   perl-module-io-handle \
+                   perl-module-tap-harness-env \
+                   perl-module-ipc-open3 \
+                   perl-module-file-path \
+                   perl-module-cpan-meta \
+                   perl-module-extutils-cbuilder \
+                   perl-module-getopt-long \
+                   perl-module-extutils-makemaker \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-text-parsewords \
+                   perl-module-module-load \
+                   perl-module-file-temp \
+                   perl-module-data-dumper \
+                   perl-module-extutils-parsexs \
+                   perl-module-pod-man \
+                   perl-module-json-pp \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
#19 lore raw

Re: [meta-perl][PATCH v2 08/10] libmodule-build-tiny-perl: add 0.030

Quoted 24 lines · Tim Orling

[Description from CPAN]
Many Perl distributions use a Build.PL file instead of a Makefile.PL file to drive distribution configuration, build, test and installation. Traditionally, Build.PL uses Module::Build as the underlying build system. This module provides a simple, lightweight, drop-in replacement.

---
  .../libmodule/libmodule-build-tiny-perl_0.030.bb   |   54 ++++++++++++++++++++
  1 file changed, 54 insertions(+)

create mode 100644 meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb

meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb new file +6 -0
new file mode 100644
index 0000000..fadd9c7
@@ -0,0 +1,54 @@
+SUMMARY = "Module::Build::Tiny - A tiny replacement for Module::Build"
+DESCRIPTION = "Many Perl distributions use a Build.PL file instead of a \
+Makefile.PL file to drive distribution configuration, build, test and \
+installation. Traditionally, Build.PL uses Module::Build as the underlying \
+build system. This module provides a simple, lightweight, drop-in replacement. \
+Whereas Module::Build has over 6,700 lines of code; this module has less than \

meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb line 16

Quoted 10 lines
meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb new file +10 -0
+120, yet supports the features needed by most distributions."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/Module-Build-Tiny/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=aaca61412962cf972aec0cdad99d0a84"
+
+DEPENDS = "libextutils-config-native libextutils-helpers-native libextutils-installpaths-native"
+

Hi Tim,

Not found '"libextutils-config-native libextutils-helpers-native libextutils-installpaths-native"',

Is '*-perl-*' missing ?

$ bitbake libmodule-build-tiny-perl
Loading cache: 100% |#########################################################################################################| ETA:  00:00:00
Loaded 1243 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'libextutils-config-native' (but /home/jiahongxu/yocto/meta-openembedded/meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb DEPENDS on or otherwise requires it). Close matches:
  libextutils-config-perl-native
  libextutils-config-perl
  libextutils-cppguess-perl-native
ERROR: Required build target 'libmodule-build-tiny-perl' has no buildable providers.
Missing or unbuildable dependency chain was: ['libmodule-build-tiny-perl', 'libextutils-config-native']

Hi Paul & Tim,

Sorry for the late reply, the inaccurate email fillter rules caused me missing the meta-perl mail, I have fixed it, and put them as prior.

//Hongxu

Quoted 38 lines
meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb new file +38 -0
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/Module-Build-Tiny-${PV}.tar.gz"
+SRC_URI[md5sum] = "1c54bf4c602eec87f98950314699402e"
+SRC_URI[sha256sum] = "dfd418ad0e8290cf645ab11be209a1bf6865e5a562c5a1592da99d5fd24718a8"
+
+S = "${WORKDIR}/Module-Build-Tiny-${PV}"
+
+inherit cpan_build
+
+do_install () {
+        cpan_build_do_install
+}
+
+RDEPENDS_${PN} = " libextutils-config-perl \
+                   libextutils-helpers-perl \
+                   libextutils-installpaths-perl \
+                   perl-module-xsloader \
+                   perl-module-file-spec \
+                   perl-module-io-handle \
+                   perl-module-tap-harness-env \
+                   perl-module-ipc-open3 \
+                   perl-module-file-path \
+                   perl-module-cpan-meta \
+                   perl-module-extutils-cbuilder \
+                   perl-module-getopt-long \
+                   perl-module-extutils-makemaker \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-test-more \
+                   perl-module-text-parsewords \
+                   perl-module-module-load \
+                   perl-module-file-temp \
+                   perl-module-data-dumper \
+                   perl-module-extutils-parsexs \
+                   perl-module-pod-man \
+                   perl-module-json-pp \
+"
+
+BBCLASSEXTEND = "native"

A message that is not in the archive (sent off-list or not yet received): CANx9H-Bc+6QxLGkr5Kv68_ag161n9gc-0bBQ0PrjTheSCZUZ1w@mail.gmail.com

#21 lore raw

Re: [meta-perl][PATCH v2 08/10] libmodule-build-tiny-perl: add 0.030

Quoted 8 lines · Tim Orling

Yes, -perl is missing. Didn't quite fix the Debian-izing of that recipe :)

I will submit a patch.

--Tim

BTW, I did not create the info for the Readme for the layer. With these 10 recipes, about 14 more I have in the wings and about 80 I am working on that Paul has pointed me to (from Emil), that Readme is going to get VERY long. Do we want to maintain the practice or ...? Don't get me wrong, it is helpful.

Yes, any README for the practice is welcomed, there is a README in meta-perl/, if yours is very long, you could put it in the involved recipes dir or summarize it to take an simple example to add to meta-perl/README.

//Hongxu

Quoted 141 lines · On Fri, Mar 28, 2014 at 11:24 PM, Hongxu Jia <[email protected]…

On 02/03/2014 02:51 PM, Tim Orling wrote:

[Description from CPAN]
Many Perl distributions use a Build.PL file instead of a Makefile.PL file to drive distribution configuration, build, test and
installation. Traditionally, Build.PL uses Module::Build as the underlying
build system. This module provides a simple, lightweight, drop-in replacement.

<mailto:[email protected]>>
---
.../libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb> | 54
++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644
meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb>

diff --git a/meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb>
b/meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb>
new file mode 100644
index 0000000..fadd9c7
--- /dev/null
+++
b/meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb>
@@ -0,0 +1,54 @@
+SUMMARY = "Module::Build::Tiny - A tiny replacement for Module::Build"
+DESCRIPTION = "Many Perl distributions use a Build.PL file instead of a \
+Makefile.PL file to drive distribution configuration, build, test and \
+installation. Traditionally, Build.PL uses Module::Build as the underlying \
+build system. This module provides a simple, lightweight, drop-in replacement. \
+Whereas Module::Build has over 6,700 lines of code; this module has less than \
+120, yet supports the features needed by most distributions." +SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~leont/Module-Build-Tiny/
<http://search.cpan.org/%7Eleont/Module-Build-Tiny/>"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=aaca61412962cf972aec0cdad99d0a84"
+
+DEPENDS = "libextutils-config-native libextutils-helpers-native libextutils-installpaths-native" +

Hi Tim,

Not found '"libextutils-config-native libextutils-helpers-native libextutils-installpaths-native"',

Is '*-perl-*' missing ?

$ bitbake libmodule-build-tiny-perl
Loading cache: 100% |#########################################################################################################|
ETA: 00:00:00
Loaded 1243 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing PROVIDES 'libextutils-config-native' (but /home/jiahongxu/yocto/meta-openembedded/meta-perl/recipes-perl/libmodule/libmodule-build-tiny-perl_0.030.bb
<http://libmodule-build-tiny-perl_0.030.bb> DEPENDS on or
otherwise requires it). Close matches:
libextutils-config-perl-native
libextutils-config-perl
libextutils-cppguess-perl-native
ERROR: Required build target 'libmodule-build-tiny-perl' has no
buildable providers.
Missing or unbuildable dependency chain was:
['libmodule-build-tiny-perl', 'libextutils-config-native']

Hi Paul & Tim,

Sorry for the late reply, the inaccurate email fillter rules caused me missing the meta-perl mail, I have fixed it, and put them as prior.

//Hongxu

+SRC_URI = "http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/Module-Build-Tiny-${PV}.tar.gz
<http://search.cpan.org/CPAN/authors/id/L/LE/LEONT/Module-Build-Tiny-$%7BPV%7D.tar.gz>"
+SRC_URI[md5sum] = "1c54bf4c602eec87f98950314699402e" +SRC_URI[sha256sum] = "dfd418ad0e8290cf645ab11be209a1bf6865e5a562c5a1592da99d5fd24718a8" +
+S = "${WORKDIR}/Module-Build-Tiny-${PV}"
+
+inherit cpan_build
+
+do_install () {
+ cpan_build_do_install
+}
+
+RDEPENDS_${PN} = " libextutils-config-perl \
+ libextutils-helpers-perl \
+ libextutils-installpaths-perl \
+ perl-module-xsloader \
+ perl-module-file-spec \
+ perl-module-io-handle \
+ perl-module-tap-harness-env \
+ perl-module-ipc-open3 \
+ perl-module-file-path \
+ perl-module-cpan-meta \
+ perl-module-extutils-cbuilder \
+ perl-module-getopt-long \
+ perl-module-extutils-makemaker \
+ perl-module-exporter \
+ perl-module-carp \
+ perl-module-test-more \
+ perl-module-text-parsewords \
+ perl-module-module-load \
+ perl-module-file-temp \
+ perl-module-data-dumper \
+ perl-module-extutils-parsexs \
+ perl-module-pod-man \
+ perl-module-json-pp \
+"
+
+BBCLASSEXTEND = "native"

author
#22 lore raw

PATCH v2 9/10 libextutils-cppguess-perl: add 0.07

In reply to Tim Orling

[Description from CPAN]
ExtUtils::CppGuess attempts to guess the system's C++ compiler that is compatible with the C compiler that your perl was built with.

---
 .../libextutils/libextutils-cppguess-perl_0.07.bb  |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libextutils/libextutils-cppguess-perl_0.07.bb
meta-perl/recipes-perl/libextutils/libextutils-cppguess-perl_0.07.bb new file +38 -0
new file mode 100644
index 0000000..0e5e304
@@ -0,0 +1,38 @@
+SUMMARY = "ExtUtils::CppGuess - guess C++ compiler and flags"
+DESCRIPTION = "ExtUtils::CppGuess attempts to guess the system's C++ \
+compiler that is compatible with the C compiler that your perl was built \
+with. \
+It can generate the necessary options to the Module::Build constructor or \
+to ExtUtils::MakeMaker's WriteMakefile function."
+SECTION = "libs"
+
+HOMEPAGE = "http://search.cpan.org/~smueller/ExtUtils-CppGuess/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://README;beginline=81;endline=84;md5=84c0390b90ea8c6702ce659b67bed699"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/S/SM/SMUELLER/ExtUtils-CppGuess-${PV}.tar.gz"
+SRC_URI[md5sum] = "350dd7c661189ea770d6c9354ebbc6c2"
+SRC_URI[sha256sum] = "1cd83ee8452351219b987c79ddb25cc25ee8c396318ba36c5211a92b5c87e7a8"
+
+S = "${WORKDIR}/ExtUtils-CppGuess-${PV}"
+
+inherit cpan_build
+
+do_install () {
+        cpan_build_do_install
+}
+
+RDEPENDS_${PN} = " libcapture-tiny-perl \
+                   perl-module-scalar-util \
+                   perl-module-io-file \
+                   perl-module-extutils-makemaker \
+                   perl-module-file-spec \
+                   perl-module-exporter \
+                   perl-module-carp \
+                   perl-module-file-temp \
+                   perl-module-lib \
+                   perl-module-build \
+"
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
author
#23 lore raw

PATCH v2 10/10 libalgorithm-diff-perl: add 1.15

In reply to Tim Orling

[from README]
This is a module for computing the difference between two files, two strings, or any other two lists of things. It uses an intelligent algorithm similar to (or identical to) the one used by the Unix `diff'
program. It is guaranteed to find the *smallest possible* set of
differences.

---
 .../libalgorithm/libalgorithm-diff-perl_1.15.bb    |   23 ++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 meta-perl/recipes-perl/libalgorithm/libalgorithm-diff-perl_1.15.bb
meta-perl/recipes-perl/libalgorithm/libalgorithm-diff-perl_1.15.bb new file +23 -0
new file mode 100644
index 0000000..554a6b0
@@ -0,0 +1,23 @@
+SUMMARY = "Algorithm::Diff - Compute 'intelligent' differences between two \
+files/lists"
+DESCRIPTION = "This is a module for computing the difference between two files, \
+two strings, or any other two lists of things.  It uses an  intelligent \
+algorithm similar to (or identical to) the one used by the Unix `diff' \
+program.   It is guaranteed to find the *smallest possible* set of \
+differences. \
+"
+SECTION = "libs"
+HOMEPAGE = "http://search.cpan.org/~nedkonz/Algorithm-Diff/"
+
+LICENSE = "Artistic-1.0 | GPL-1.0+"
+LIC_FILES_CHKSUM = "file://lib/Algorithm/Diff.pm;beginline=406;endline=409;md5=d393b8ad3b8994b9d0ae9299b8a8a1ee"
+
+SRC_URI = "http://search.cpan.org/CPAN/authors/id/N/NE/NEDKONZ/Algorithm-Diff-${PV}.tar.gz"
+SRC_URI[md5sum] = "457cd497a0411a88b47d3741eb176071"
+SRC_URI[sha256sum] = "aa848b75ad3ecc32d31e8651909551e851cceef74a32822c7a3cb35c259f5190"
+
+S = "${WORKDIR}/Algorithm-Diff-${PV}"
+
+inherit cpan
+
+BBCLASSEXTEND = "native"
Signature · 1 line
1.7.9.5
#24 lore raw
In reply to Tim Orling
Quoted 10 lines · On Sunday 02 February 2014 22:51:05 Tim Orling wrote:

This series of recipes is the first step towards the ultimate goal of getting Slic3r to build in OE.

Original submission was missing Algorithm::Diff which Text::Diff depends on.

Resubmitted to follow Debian Perl Policy.
See 4.2 Module Package Names
[http://www.debian.org/doc/packaging-manuals/perl-policy/ch-module_packages
.html]

Quoted 11 lines

Tim Orling (10):
libmodule-metadata-perl: add 1.000019
libtext-diff-perl: add 1.41
libcapture-tiny-perl: add 0.23
libmodule-runtime-perl: add 0.013
libextutils-config-perl: add 0.007
libextutils-helpers-perl: add 0.021
libextutils-installpaths-perl: add 0.010
libmodule-build-tiny-perl: add 0.030
libextutils-cppguess-perl: add 0.07
libalgorithm-diff-perl: add 1.15

Hongxu, do these look OK? If so do you need me to apply them, or do you have access to do that now?

Thanks,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#25 lore raw
Quoted 25 lines · On Wednesday 26 February 2014 10:03:46 Paul Eggleton wrote:
Quoted 12 lines · On Sunday 02 February 2014 22:51:05 Tim Orling wrote:

This series of recipes is the first step towards the ultimate goal of getting Slic3r to build in OE.

Original submission was missing Algorithm::Diff which Text::Diff depends on.

Resubmitted to follow Debian Perl Policy.
See 4.2 Module Package Names
[http://www.debian.org/doc/packaging-manuals/perl-policy/ch-module_package
s
.html]

Quoted 11 lines

Tim Orling (10):
libmodule-metadata-perl: add 1.000019
libtext-diff-perl: add 1.41
libcapture-tiny-perl: add 0.23
libmodule-runtime-perl: add 0.013
libextutils-config-perl: add 0.007
libextutils-helpers-perl: add 0.021
libextutils-installpaths-perl: add 0.010
libmodule-build-tiny-perl: add 0.030
libextutils-cppguess-perl: add 0.07
libalgorithm-diff-perl: add 1.15

Quoted 2 lines

Hongxu, do these look OK? If so do you need me to apply them, or do you have access to do that now?

Hongxu - ping

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre
#26 lore raw
Quoted 27 lines · On Sunday 09 March 2014 11:49:49 Paul Eggleton wrote:
Quoted 26 lines · On Wednesday 26 February 2014 10:03:46 Paul Eggleton wrote:
Quoted 24 lines · On Sunday 02 February 2014 22:51:05 Tim Orling wrote:

This series of recipes is the first step towards the ultimate goal of getting Slic3r to build in OE.

Original submission was missing Algorithm::Diff which Text::Diff depends on.

Resubmitted to follow Debian Perl Policy.
See 4.2 Module Package Names
[http://www.debian.org/doc/packaging-manuals/perl-policy/ch-module_packa
ge
s
.html]

Tim Orling (10):
libmodule-metadata-perl: add 1.000019
libtext-diff-perl: add 1.41
libcapture-tiny-perl: add 0.23
libmodule-runtime-perl: add 0.013
libextutils-config-perl: add 0.007
libextutils-helpers-perl: add 0.021
libextutils-installpaths-perl: add 0.010
libmodule-build-tiny-perl: add 0.030
libextutils-cppguess-perl: add 0.07
libalgorithm-diff-perl: add 1.15

Quoted 4 lines
Quoted 2 lines

Hongxu, do these look OK? If so do you need me to apply them, or do you have access to do that now?

Hongxu - ping

ping...

Cheers,
Paul

Signature · 2 lines
Paul Eggleton
Intel Open Source Technology Centre