ARM: dts: imx27-phytec-phycard-s-som: Sort entries
Subsystems (2)
PATCH 1/3 ARM: dts: imx27-phytec-phycard-s-som: Sort entries
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 36 ++++++++++++------------ 1 file changed, 18 insertions(+), 18 deletions(-)
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts +18 -18
@@ -29,6 +29,24 @@ status = "okay"; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + at24 at 52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; +}; + &iomuxc { imx27-phycard-s-som { pinctrl_fec1: fec1grp {
@@ -62,21 +80,3 @@ }; }; }; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - at24 at 52 { - compatible = "at,24c32"; - pagesize = <32>; - reg = <0x52>; - }; -};
Signature · 1 line
1.8.3.2
PATCH 2/3 ARM: dts: imx27-phytec-phycard-s-som: Add NFC node
This patch adds the NFC devicetree node for Phytec PCA100 module.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts +21 -0
@@ -78,5 +78,26 @@ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 >; }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; }; }; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +};
Signature · 1 line
1.8.3.2
PATCH 3/3 ARM: dts: imx27-phytec-phycard-s-rdk: Add pinctrl definitions for SDHC2
In reply to Alexander ShiyanThis patch adds pinctrl definitions for SDHC2 for Phytec PCA100 RDK board.
Signed-off-by Alexander Shiyan <[email protected]>
--- arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +14 -0
@@ -88,6 +88,18 @@ >; }; + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX27_PAD_UART1_TXD__UART1_TXD 0x0
@@ -124,6 +136,8 @@ }; &sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc2>; cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; status = "okay"; };
Signature · 1 line
1.8.3.2
Sascha Hauer
maintainerPATCH 1/3 ARM: dts: imx27-phytec-phycard-s-som: Sort entries
In reply to Alexander ShiyanQuoted 1 line · Alexander Shiyan
Signed-off-by Alexander Shiyan <[email protected]>
This series:
Acked-by Sascha Hauer <[email protected]>
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Shawn Guo
AppliedPATCH 1/3 ARM: dts: imx27-phytec-phycard-s-som: Sort entries
In reply to Alexander ShiyanQuoted 1 line · Alexander Shiyan
Signed-off-by Alexander Shiyan <[email protected]>
Applied all 3, thanks.
Shawn
Quoted 58 lines
--- arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts | 36 ++++++++++++------------ 1 file changed, 18 insertions(+), 18 deletions(-)arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts +18
-18@@ -29,6 +29,24 @@ status = "okay"; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + at24 at 52 { + compatible = "at,24c32"; + pagesize = <32>; + reg = <0x52>; + }; +}; + &iomuxc { imx27-phycard-s-som { pinctrl_fec1: fec1grp {@@ -62,21 +80,3 @@ }; }; }; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - at24 at 52 { - compatible = "at,24c32"; - pagesize = <32>; - reg = <0x52>; - }; -};Signature · 1 line
1.8.3.2