Skip to contentSkip to conversation

clocksource: kona: Print warning rather than panic

PATCH New Tim Kryger 2 participants 2 messages Feb 5, 2014 – Feb 6, 2014

Subsystems (2)
lore
Share & tools
lore

Tim Kryger

author
#0 lore raw

PATCH v2 1/1 clocksource: kona: Print warning rather than panic

Since there may be other clocksources available, this driver should not trigger a panic simply because it can not determine the frequency of an external clock. This change refactors the driver to allow a warning to be printed in this case instead.

---

Changes since v1:
- Rebased on v3.14-rc1

 drivers/clocksource/bcm_kona_timer.c | 54 +++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 26 deletions(-)
drivers/clocksource/bcm_kona_timer.c +28 -26
index 974b2db..0595dc6 100644
@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
 	return;
 }
 
-static void __init kona_timers_init(struct device_node *node)
-{
-	u32 freq;
-	struct clk *external_clk;
-
-	external_clk = of_clk_get_by_name(node, NULL);
-
-	if (!IS_ERR(external_clk)) {
-		arch_timer_rate = clk_get_rate(external_clk);
-		clk_prepare_enable(external_clk);
-	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
-		arch_timer_rate = freq;
-	} else {
-		panic("unable to determine clock-frequency");
-	}
-
-	/* Setup IRQ numbers */
-	timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
-	/* Setup IO addresses */
-	timers.tmr_regs = of_iomap(node, 0);
-
-	kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
 static int kona_timer_set_next_event(unsigned long clc,
 				  struct clock_event_device *unused)
 {
@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
 
 static void __init kona_timer_init(struct device_node *node)
 {
-	kona_timers_init(node);
+	u32 freq;
+	struct clk *external_clk;
+
+	if (!of_device_is_available(node)) {
+		pr_info("Kona Timer v1 marked as disabled in device tree\n");
+		return;
+	}
+
+	external_clk = of_clk_get_by_name(node, NULL);
+
+	if (!IS_ERR(external_clk)) {
+		arch_timer_rate = clk_get_rate(external_clk);
+		clk_prepare_enable(external_clk);
+	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+		arch_timer_rate = freq;
+	} else {
+		pr_err("Kona Timer v1 unable to determine clock-frequency");
+		return;
+	}
+
+	/* Setup IRQ numbers */
+	timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+	/* Setup IO addresses */
+	timers.tmr_regs = of_iomap(node, 0);
+
+	kona_timer_disable_and_clear(timers.tmr_regs);
+
 	kona_timer_clockevents_init();
 	setup_irq(timers.tmr_irq, &kona_timer_irq);
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
Signature · 1 line
1.8.0.1
#1 lore raw

[tip:timers/urgent] clocksource: Kona: Print warning rather than panic

clocksource: Kona: Print warning rather than panic
Commit-ID:  ad037c1f4ae6f9258f27fddb679ceb703ff07a88
Gitweb:     http://git.kernel.org/tip/ad037c1f4ae6f9258f27fddb679ceb703ff07a88
Author:     Tim Kryger <[email protected]>
AuthorDate: Tue, 4 Feb 2014 16:15:04 -0800
Committer:  Thomas Gleixner <[email protected]>
CommitDate: Thu, 6 Feb 2014 16:01:40 +0100

clocksource: Kona: Print warning rather than panic

Since there may be other clocksources available, this driver should not trigger a panic simply because it can not determine the frequency of an external clock. This change refactors the driver to allow a warning to be printed in this case instead.

---
 drivers/clocksource/bcm_kona_timer.c | 54 +++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 26 deletions(-)
drivers/clocksource/bcm_kona_timer.c +28 -26
index 974b2db..0595dc6 100644
@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
 	return;
 }
 
-static void __init kona_timers_init(struct device_node *node)
-{
-	u32 freq;
-	struct clk *external_clk;
-
-	external_clk = of_clk_get_by_name(node, NULL);
-
-	if (!IS_ERR(external_clk)) {
-		arch_timer_rate = clk_get_rate(external_clk);
-		clk_prepare_enable(external_clk);
-	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
-		arch_timer_rate = freq;
-	} else {
-		panic("unable to determine clock-frequency");
-	}
-
-	/* Setup IRQ numbers */
-	timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
-	/* Setup IO addresses */
-	timers.tmr_regs = of_iomap(node, 0);
-
-	kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
 static int kona_timer_set_next_event(unsigned long clc,
 				  struct clock_event_device *unused)
 {
@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
 
 static void __init kona_timer_init(struct device_node *node)
 {
-	kona_timers_init(node);
+	u32 freq;
+	struct clk *external_clk;
+
+	if (!of_device_is_available(node)) {
+		pr_info("Kona Timer v1 marked as disabled in device tree\n");
+		return;
+	}
+
+	external_clk = of_clk_get_by_name(node, NULL);
+
+	if (!IS_ERR(external_clk)) {
+		arch_timer_rate = clk_get_rate(external_clk);
+		clk_prepare_enable(external_clk);
+	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+		arch_timer_rate = freq;
+	} else {
+		pr_err("Kona Timer v1 unable to determine clock-frequency");
+		return;
+	}
+
+	/* Setup IRQ numbers */
+	timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+	/* Setup IO addresses */
+	timers.tmr_regs = of_iomap(node, 0);
+
+	kona_timer_disable_and_clear(timers.tmr_regs);
+
 	kona_timer_clockevents_init();
 	setup_irq(timers.tmr_irq, &kona_timer_irq);
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);