beaglebone: u-boot and kernel updates
v3 cover beaglebone: u-boot and kernel updates
Hi,
This patch series upgrades the kernel for the BeagleBone to 3.12.
The 3.12 kernel is taken from TI's own repo, and the actual branch/commit used is the latest used in their own BSP (see meta-ti for OpenEmbedded / Yocto).
I've tried to keep the defconfig as close to the 3.8 version as possible. Though, it's quite likely that some added configuration could have been removed.
It's only been tested on a BeagleBone White, using my usual NFS-root setup.
The PM FW in am33x-cm3 has been update to keep it in sync with the kernel. The revision used is taken from meta-ti.
There's also an update to the latest U-Boot, and as a followup to that patch, a change to zImage instead of uImage. (As that's the current default in U-Boot).
Cheers,
Anders
Changelog:
v2 -> v3:
* Update the kernel and am33x-pm to the latest sha1's.
v1 -> v2:
* update the git sha1 to the latest applied to the meta-ti repo.
Anders Darander (4):
beaglebone: update to TI 3.12 kernel
am33x-cm3: update to latest version
beaglebone: update to latest U-Boot
beaglebone: change to zImage
.../{linux-3.8.config => linux-3.12.config} | 104 ++++++++++++++-------
configs/beaglebone_defconfig | 9 +-
.../am33x-cm3/am33x-cm3-0001-fix-makefile.patch | 16 ++--
package/am33x-cm3/am33x-cm3.mk | 3 +-
4 files changed, 88 insertions(+), 44 deletions(-)
rename board/beaglebone/{linux-3.8.config => linux-3.12.config} (68%)Signature · 1 line
1.9.rc1
PATCH v3 1/4 beaglebone: update to TI 3.12 kernel
Git repo version is taken from meta-ti. It's a 3.12.9 kernel with TI's own patches on top.
The defconfig has been kept rather close to our old defconfig. The kernel has been boot-tested using an NFS-root.
Apart from the kernel change, the linux headers has also been updated from 3.8.12 to 3.12.9.
---
.../{linux-3.8.config => linux-3.12.config} | 104 ++++++++++++++-------
configs/beaglebone_defconfig | 6 +-
2 files changed, 75 insertions(+), 35 deletions(-)
rename board/beaglebone/{linux-3.8.config => linux-3.12.config} (68%)board/beaglebone/linux-3.12.config renamed from board/beaglebone/linux-3.8.config +72 -32
@@ -1,5 +1,3 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_DEFAULT_HOSTNAME="beaglebone" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_NO_HZ=y
@@ -9,39 +7,67 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_EMBEDDED=y +CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_PROFILING=y -CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -# CONFIG_ARCH_OMAP2 is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_AM43XX=y +# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set +# CONFIG_SOC_TI81XX is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_DEVKIT8000 is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP3530_LV_SOM is not set +# CONFIG_MACH_OMAP3_TORPEDO is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_TOUCHBOOK is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RM680 is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_CM_T3517 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_IGEP0030 is not set +# CONFIG_MACH_SBC3530 is not set +# CONFIG_MACH_OMAP_3630SDP is not set CONFIG_ARM_THUMBEE=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_GENERIC_CPUFREQ_CPU0=y +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +CONFIG_FPE_NWFPE=y +CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=y +CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y
@@ -58,44 +84,45 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y -CONFIG_OMAP_INTERCONNECT=y CONFIG_CONNECTOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_CROSSBAR=y CONFIG_EEPROM_93CX6=y +CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_ATA=y -# CONFIG_SATA_PMP is not set -CONFIG_SATA_AHCI_PLATFORM=m -# CONFIG_ATA_SFF is not set +CONFIG_MD=y CONFIG_NETDEVICES=y -CONFIG_MII=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +# CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set -CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_MISC=y +CONFIG_SERIO_LIBPS2=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y
@@ -106,11 +133,15 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_I2C=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_OMAP=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y -CONFIG_DEBUG_PINCTRL=y +CONFIG_SPI_TI_QSPI=y CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y
@@ -120,27 +151,31 @@ CONFIG_THERMAL=y CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y +CONFIG_MFD_SYSCON=y CONFIG_MFD_TPS65217=y +CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TIAVSCLASS0=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_AM35X=m +CONFIG_USB_MUSB_OMAP2PLUS=m +CONFIG_USB_MUSB_DSPS=m +CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=y -CONFIG_OMAP_USB2=m -CONFIG_OMAP_USB3=m -CONFIG_OMAP_CONTROL_USB=y +CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m
@@ -152,6 +187,7 @@ CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y
@@ -168,7 +204,10 @@ CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y -CONFIG_STAGING=y +CONFIG_TI_CPPI41=y +CONFIG_COMMON_CLK_DEBUG=y +CONFIG_OMAP_USB2=y +CONFIG_OMAP_PIPE3=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set
@@ -178,23 +217,24 @@ CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y
configs/beaglebone_defconfig +3 -3
@@ -16,7 +16,7 @@ BR2_TARGET_ROOTFS_EXT2=y # lock down headers to avoid breaking with new defaults BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.8.12" +BR2_DEFAULT_KERNEL_VERSION="3.12.9" # bootloader BR2_TARGET_UBOOT=y
@@ -31,8 +31,8 @@ BR2_TARGET_UBOOT_SPL_NAME="MLO" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a4daf45088f752ed6b33239026518fc3d1bce2bc" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.12.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
Signature · 1 line
1.9.rc1
PATCH v3 2/4 am33x-cm3: update to latest version
In reply to Anders DaranderThis goes hand-in-hand with the kernel update.
The version is taken from meta-ti.
The new kernel version, 3.12, requires a newer PM FW.
This should correspond to v05.00.00.02, though that tag has not been pushed...
--- package/am33x-cm3/am33x-cm3-0001-fix-makefile.patch | 16 ++++++++++------ package/am33x-cm3/am33x-cm3.mk | 3 ++- 2 files changed, 12 insertions(+), 7 deletions(-)
package/am33x-cm3/am33x-cm3-0001-fix-makefile.patch +10 -6
@@ -11,16 +11,20 @@ Fix this by explicitly indicating -march=armv7-m. Signed-off-by: Thomas Petazzoni <[email protected]> +Updated the patch to the latest version of the Makefile + +Signed-off-by: Anders Darander <[email protected]> + Index: b/Makefile =================================================================== --- a/Makefile +++ b/Makefile -@@ -13,7 +13,7 @@ +@@ -13,7 +13,7 @@ SRCDIR = src BINDIR = bin INCLUDES = $(SRCDIR)/include --CFLAGS =-mcpu=cortex-m3 -mthumb -nostdlib -Wall -g -I$(INCLUDES) -+CFLAGS =-march=armv7-m -mcpu=cortex-m3 -mthumb -nostdlib -Wall -g -I$(INCLUDES) - LDFLAGS =-nostartfiles -fno-exceptions -Tfirmware.ld - - EXECUTABLE=am335x-pm-firmware.elf +-CFLAGS =-mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \ ++CFLAGS =-march=armv7-m -mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \ + -Werror-implicit-function-declaration -Wstrict-prototypes \ + -Wdeclaration-after-statement -fno-delete-null-pointer-checks \ + -Wempty-body -fno-strict-overflow -g -I$(INCLUDES) -O2
package/am33x-cm3/am33x-cm3.mk +2 -1
@@ -4,7 +4,8 @@ # ################################################################################ -AM33X_CM3_VERSION = AM335xPSP_04.06.00.10-rc1 +# This should correpsond to v05.00.00.02 +AM33X_CM3_VERSION = 11107db2f1e9e58ee75d4fe9cc38423c9a6e4365 AM33X_CM3_SITE = http://arago-project.org/git/projects/am33x-cm3.git AM33X_CM3_SITE_METHOD = git AM33X_CM3_LICENSE = TI Publicly Available Software License
Signature · 1 line
1.9.rc1
PATCH v3 3/4 beaglebone: update to latest U-Boot
In reply to Anders DaranderUpdate to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the currently prefered zImage.
--- configs/beaglebone_defconfig | 2 -- 1 file changed, 2 deletions(-)
configs/beaglebone_defconfig +0 -2
@@ -21,8 +21,6 @@ BR2_DEFAULT_KERNEL_VERSION="3.12.9" # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="am335x_evm" -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04" BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="MLO"
Signature · 1 line
1.9.rc1
PATCH v3 3/4 beaglebone: update to latest U-Boot
Dear Anders Darander,
Quoted 15 lines · Anders Darander
Update to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the currently prefered zImage.
Signed-off-by Anders Darander <[email protected]>--- configs/beaglebone_defconfig | 2 -- 1 file changed, 2 deletions(-)configs/beaglebone_defconfig +0
-0
configs/beaglebone_defconfig BR2_DEFAULT_KERNEL_VERSION="3.12.9" · line 25
Quoted 5 lines
configs/beaglebone_defconfig +0
-2@@ -21,8 +21,6 @@ BR2_DEFAULT_KERNEL_VERSION="3.12.9" # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="am335x_evm" -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
You should keep these lines and just change it to "2013.10".
The reason is that if you remove these lines, then what the defconfig means is "use whatever default version Buildroot has". This is not the behavior what we want for defconfig, since we want them to be reproducible, as we have no guarantee that newer U-Boot versions will continue to work for a given platform.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH v3 3/4 beaglebone: update to latest U-Boot
Hi,
Quoted 27 lines · Thomas Petazzoni
Dear Anders Darander,
Review
Quoted 11 lines · Anders Darander
Update to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the currently prefered zImage.
Signed-off-by Anders Darander <[email protected]>--- configs/beaglebone_defconfig | 2 -- 1 file changed, 2 deletions(-)(quoted diff) +0
-0b/configs/beaglebone_defconfig
configs/beaglebone_defconfig BR2_DEFAULT_KERNEL_VERSION="3.12.9" · line 25
Quoted 9 lines
index 490bed5..6fa8226 100644
configs/beaglebone_defconfig +0
-2@@ -21,8 +21,6 @@ BR2_DEFAULT_KERNEL_VERSION="3.12.9" # bootloader BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="am335x_evm" -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"You should keep these lines and just change it to "2013.10".
Quoted 5 lines
The reason is that if you remove these lines, then what the defconfig means is "use whatever default version Buildroot has". This is not the behavior what we want for defconfig, since we want them to be reproducible, as we have no guarantee that newer U-Boot versions will continue to work for a given platform.
I really knew this...
I'll respin the patches, likely on Monday morning. Hopefully I can also change the am33x-cm3 patch back to use a git tag instead oh a SHA1 then, at least of TI pushes that tag.
Do you have any comment on Ryan's suggestion to squash the change to zImage into this patch?
Cheers,
Anders
Signature · 1 line
ChargeStorm AB / eStorm
PATCH v3 4/4 beaglebone: change to zImage
In reply to Anders DaranderThe default U-Boot configuration is now to use a zImage instead of uImage.
--- configs/beaglebone_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/beaglebone_defconfig +1 -0
@@ -32,5 +32,6 @@ BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kern BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a4daf45088f752ed6b33239026518fc3d1bce2bc" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.12.config" +BR2_LINUX_KERNEL_ZIMAGE=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
Signature · 1 line
1.9.rc1
PATCH v3 4/4 beaglebone: change to zImage
Anders, All,
Quoted 12 lines · Anders Darander
The default U-Boot configuration is now to use a zImage instead of uImage.
Signed-off-by Anders Darander <[email protected]>--- configs/beaglebone_defconfig | 1 + 1 file changed, 1 insertion(+)configs/beaglebone_defconfig +0
-0
configs/beaglebone_defconfig BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kern · line 35
Quoted 4 lines
configs/beaglebone_defconfig +1
-0@@ -32,5 +32,6 @@ BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kern BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a4daf45088f752ed6b33239026518fc3d1bce2bc" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.12.config" +BR2_LINUX_KERNEL_ZIMAGE=y
I would suggest merging this change with your previous patch - "beaglebone: update to latest U-Boot" - because the upgrading of u-boot is what is causing the change to zImage.
Thanks,
-Ryan
PATCH v3 4/4 beaglebone: change to zImage
Hi,
Quoted 21 lines · Ryan Barnett
Anders, All,
Quoted 1 line · Anders Darander
The default U-Boot configuration is now to use a zImage instead of
uImage.
Review
Quoted 7 lines
Signed-off-by Anders Darander <[email protected]>--- configs/beaglebone_defconfig | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0b/configs/beaglebone_defconfig
configs/beaglebone_defconfig
Quoted 4 lines
index 6fa8226..062d711 100644
configs/beaglebone_defconfig +0
-0@@ -32,5 +32,6 @@BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kern
Quoted 1 line
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="a4daf45088f752ed6b33239026518fc3d1bce2bc"
Quoted 8 lines
Quoted 2 lines
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.12.config"
Quoted 1 line
+BR2_LINUX_KERNEL_ZIMAGE=y
I would suggest merging this change with your previous patch - "beaglebone: update to latest U-Boot" - because the upgrading of u-boot is what is causing the change to zImage.
What do other dev's think about this? It doesn't really matter to me if I squash then or not.
My reasoning was that of you kept the old U-Boot environment, the new U-Boot works with a uImage. That's basically why I kept it as separate patches.
Cheers,
Anders
Signature · 1 line
ChargeStorm AB / eStorm
PATCH v3 4/4 beaglebone: change to zImage
Dear Anders Darander,
Quoted 3 lines · Anders Darander
What do other dev's think about this? It doesn't really matter to me if I squash then or not.
My reasoning was that of you kept the old U-Boot environment, the new U-Boot works with a uImage. That's basically why I kept it as separate patches.
Hum, I believe that's a good point. Then maybe for "clarity" it's better to keep them separate. This way, an user looking through the changes on the beaglebone_defconfig will more likely see this change.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH v3 4/4 beaglebone: change to zImage
In reply to Anders DaranderAnders,
Quoted 7 lines · Anders Darander
What do other dev's think about this? It doesn't really matter to me if I squash then or not.
My reasoning was that of you kept the old U-Boot environment, the new U-Boot works with a uImage. That's basically why I kept it as separate patches.
My original thinking was since the default U-Boot environment (in the board file) was being changed to use zImage with version bump, you should change the kernel image to be zImage in the same patch. I did not think of this use case when I quickly looked over this change. So I'm OK with keeping this separate.
Thanks,
-Ryan