drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext'
Subsystems (2)
PATCH v2 1/1 drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext'
From: Akash Goel <[email protected]>
This workaround is needed on VLV for the HW context feature. It is used after adding the mi_set_context command in ring buffer for Hw context switch. As per the spec
"The software must send a pipe_control with a CS stall and a post sync operation and then a dummy DRAW after every MI_SET_CONTEXT and after any PIPELINE_SELECT that is enabling 3D mode".
v2: Modified the WA comment. (Ville)
--- drivers/gpu/drm/i915/i915_gem_context.c | 65 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.c | 9 +++++ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 4 files changed, 76 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_gem_context.c +63 -2
@@ -541,6 +541,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)return ctx; } +static inline void +mi_set_context_dummy3d_prim_wa (struct intel_ring_buffer *ring) +{ +u32 scratch_addr; +u32 flags =0 ; + +/* +* Check if we have the scratch page allocated needed +* for the Pipe Control command, otherwise don't apply +* the dummmy 3d primitive workaround & add NOOPs instead +*/ +if (get_pipe_control_scratch_addr (ring)) { +/* Actual scratch location is at 128 bytes offset */ + scratch_addr =get_pipe_control_scratch_addr (ring) +128 ; + +/* +* WaSendDummy3dPrimitveAfterSetContext +* Software must send a pipe_control with a CS stall +* and a post sync operation and then a dummy DRAW after +* every MI_SET_CONTEXT and after any PIPELINE_SELECT that +* is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command +* with Indirect Parameter Enable set to 0, UAV Coherency +* Required set to 0, Predicate Enable set to 0, +* End Offset Enable set to 0, and Vertex Count Per Instance +* set to 0, All other parameters are a don't care. +*/ + +/* +* Add a pipe control with CS Stall and postsync op +* before dummy 3D_PRIMITIVE +*/ + flags |=PIPE_CONTROL_QW_WRITE |PIPE_CONTROL_CS_STALL ; +intel_ring_emit (ring,GFX_OP_PIPE_CONTROL (4 )); +intel_ring_emit (ring, flags); +intel_ring_emit (ring, scratch_addr |PIPE_CONTROL_GLOBAL_GTT ); +intel_ring_emit (ring,0 ); + +/* Add a dummy 3D_PRIMITVE */ +intel_ring_emit (ring,GFX_OP_3DPRIMITIVE ()); +intel_ring_emit (ring,4 );/* PrimTopoType*/ +intel_ring_emit (ring,0 );/* VertexCountPerInstance */ +intel_ring_emit (ring,0 );/* StartVertexLocation */ +intel_ring_emit (ring,0 );/* InstanceCount */ +intel_ring_emit (ring,0 );/* StartInstanceLocation */ +intel_ring_emit (ring,0 );/* BaseVertexLocation */ + }else { +int i; +for (i =0 ; i <11 ; i++) +intel_ring_emit (ring,MI_NOOP ); + } +} + static inline int mi_set_context(struct intel_ring_buffer *ring, struct i915_hw_context *new_context,
@@ -559,7 +611,10 @@ mi_set_context(struct intel_ring_buffer *ring,return ret; } - ret =intel_ring_begin (ring,6 ); +if (IS_VALLEYVIEW (ring->dev)) + ret =intel_ring_begin (ring,6 +4 +8 ); +else + ret =intel_ring_begin (ring,6 );if (ret)return ret;
@@ -583,7 +638,13 @@ mi_set_context(struct intel_ring_buffer *ring,intel_ring_emit (ring,MI_NOOP );if (IS_GEN7 (ring->dev)) -intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +if (IS_VALLEYVIEW (ring->dev)) { +/* FIXME, should also apply to ivb */ +mi_set_context_dummy3d_prim_wa (ring); +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +intel_ring_emit (ring,MI_NOOP ); + }else +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE );else intel_ring_emit (ring,MI_NOOP );
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -335,6 +335,9 @@#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)#define PIPE_CONTROL_GLOBAL_GTT (1<<2)/* in addr dword */ +#define GFX_OP_3DPRIMITIVE () \ + ((0x3<<29)|(0x3<<27)|(0x3<<24)| \ + (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))/* * Reset registers
drivers/gpu/drm/i915/intel_ringbuffer.c +9 -0
@@ -556,6 +556,15 @@ err:return ret; } +u32 +get_pipe_control_scratch_addr (struct intel_ring_buffer *ring) +{ +if (ring->scratch.obj ==NULL ) +return 0 ; + +return ring->scratch.gtt_offset; +} +static int init_render_ring (struct intel_ring_buffer *ring) {struct drm_device *dev = ring->dev;
drivers/gpu/drm/i915/intel_ringbuffer.h +1 -0
@@ -259,6 +259,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);u32 intel_ring_get_active_head (struct intel_ring_buffer *ring);void intel_ring_setup_status_page (struct intel_ring_buffer *ring); +u32 get_pipe_control_scratch_addr (struct intel_ring_buffer *ring);static inline u32 intel_ring_get_tail (struct intel_ring_buffer *ring) {
Signature · 1 line
1.8.5.2
Quoted 9 lines · On Sat, Feb 08, 2014 at 02:22:12PM +0530, [email protected] wrote:
From: Akash Goel <[email protected]>
This workaround is needed on VLV for the HW context feature. It is used after adding the
mi_set_contextcommand in ring buffer for Hw context switch. As per the spec
"The software must send apipe_controlwith a CS stall and a post sync operation and then a dummy DRAW after everyMI_SET_CONTEXTand after anyPIPELINE_SELECTthat is enabling 3D mode".
Quoted 3 lines
v2: Modified the WA comment. (Ville)
Signed-off-by Akash Goel <[email protected]>
Hm, why the resend of these two patches? I don't see any changes compared to the orignally posted v2 ...
-Daniel
Quoted 150 lines
--- drivers/gpu/drm/i915/i915_gem_context.c | 65 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.c | 9 +++++ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 4 files changed, 76 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_gem_context.c +63
-2@@ -541,6 +541,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)return ctx; } +static inline void +mi_set_context_dummy3d_prim_wa (struct intel_ring_buffer *ring) +{ +u32 scratch_addr; +u32 flags =0 ; + +/* +* Check if we have the scratch page allocated needed +* for the Pipe Control command, otherwise don't apply +* the dummmy 3d primitive workaround & add NOOPs instead +*/ +if (get_pipe_control_scratch_addr (ring)) { +/* Actual scratch location is at 128 bytes offset */ + scratch_addr =get_pipe_control_scratch_addr (ring) +128 ; + +/* +* WaSendDummy3dPrimitveAfterSetContext +* Software must send a pipe_control with a CS stall +* and a post sync operation and then a dummy DRAW after +* every MI_SET_CONTEXT and after any PIPELINE_SELECT that +* is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command +* with Indirect Parameter Enable set to 0, UAV Coherency +* Required set to 0, Predicate Enable set to 0, +* End Offset Enable set to 0, and Vertex Count Per Instance +* set to 0, All other parameters are a don't care. +*/ + +/* +* Add a pipe control with CS Stall and postsync op +* before dummy 3D_PRIMITIVE +*/ + flags |=PIPE_CONTROL_QW_WRITE |PIPE_CONTROL_CS_STALL ; +intel_ring_emit (ring,GFX_OP_PIPE_CONTROL (4 )); +intel_ring_emit (ring, flags); +intel_ring_emit (ring, scratch_addr |PIPE_CONTROL_GLOBAL_GTT ); +intel_ring_emit (ring,0 ); + +/* Add a dummy 3D_PRIMITVE */ +intel_ring_emit (ring,GFX_OP_3DPRIMITIVE ()); +intel_ring_emit (ring,4 );/* PrimTopoType*/ +intel_ring_emit (ring,0 );/* VertexCountPerInstance */ +intel_ring_emit (ring,0 );/* StartVertexLocation */ +intel_ring_emit (ring,0 );/* InstanceCount */ +intel_ring_emit (ring,0 );/* StartInstanceLocation */ +intel_ring_emit (ring,0 );/* BaseVertexLocation */ + }else { +int i; +for (i =0 ; i <11 ; i++) +intel_ring_emit (ring,MI_NOOP ); + } +} + static inline int mi_set_context(struct intel_ring_buffer *ring, struct i915_hw_context *new_context,@@ -559,7 +611,10 @@ mi_set_context(struct intel_ring_buffer *ring,return ret; } - ret =intel_ring_begin (ring,6 ); +if (IS_VALLEYVIEW (ring->dev)) + ret =intel_ring_begin (ring,6 +4 +8 ); +else + ret =intel_ring_begin (ring,6 );if (ret)return ret;@@ -583,7 +638,13 @@ mi_set_context(struct intel_ring_buffer *ring,intel_ring_emit (ring,MI_NOOP );if (IS_GEN7 (ring->dev)) -intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +if (IS_VALLEYVIEW (ring->dev)) { +/* FIXME, should also apply to ivb */ +mi_set_context_dummy3d_prim_wa (ring); +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +intel_ring_emit (ring,MI_NOOP ); + }else +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE );else intel_ring_emit (ring,MI_NOOP );drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -335,6 +335,9 @@#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)#define PIPE_CONTROL_GLOBAL_GTT (1<<2)/* in addr dword */ +#define GFX_OP_3DPRIMITIVE () \ + ((0x3<<29)|(0x3<<27)|(0x3<<24)| \ + (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))/* * Reset registers drivers/gpu/drm/i915/intel_ringbuffer.c +9
-0@@ -556,6 +556,15 @@ err:return ret; } +u32 +get_pipe_control_scratch_addr (struct intel_ring_buffer *ring) +{ +if (ring->scratch.obj ==NULL ) +return 0 ; + +return ring->scratch.gtt_offset; +} +static int init_render_ring (struct intel_ring_buffer *ring) {struct drm_device *dev = ring->dev;drivers/gpu/drm/i915/intel_ringbuffer.h +1
-0@@ -259,6 +259,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);u32 intel_ring_get_active_head (struct intel_ring_buffer *ring);void intel_ring_setup_status_page (struct intel_ring_buffer *ring); +u32 get_pipe_control_scratch_addr (struct intel_ring_buffer *ring);static inline u32 intel_ring_get_tail (struct intel_ring_buffer *ring) {Signature · 6 lines
1.8.5.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
PATCH v3 1/1 drm/i915/vlv: Added a rendering specific Hw WA 'WaSendDummy3dPrimitveAfterSetContext'
From: Akash Goel <[email protected]>
This workaround is needed on VLV for the HW context feature. It is used after adding the mi_set_context command in ring buffer for Hw context switch. As per the spec
"The software must send a pipe_control with a CS stall and a post sync operation and then a dummy DRAW after every MI_SET_CONTEXT and after any PIPELINE_SELECT that is enabling 3D mode".
v2: Modified the WA comment. (Ville)
v3: Added the vlv identifier with the WA name
--- drivers/gpu/drm/i915/i915_gem_context.c | 65 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.c | 9 +++++ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 4 files changed, 76 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_gem_context.c +63 -2
@@ -583,6 +583,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)return ctx; } +static inline void +mi_set_context_dummy3d_prim_wa (struct intel_ring_buffer *ring) +{ +u32 scratch_addr; +u32 flags =0 ; + +/* +* Check if we have the scratch page allocated needed +* for the Pipe Control command, otherwise don't apply +* the dummmy 3d primitive workaround & add NOOPs instead +*/ +if (get_pipe_control_scratch_addr (ring)) { +/* Actual scratch location is at 128 bytes offset */ + scratch_addr =get_pipe_control_scratch_addr (ring) +128 ; + +/* +* WaSendDummy3dPrimitveAfterSetContext:vlv +* Software must send a pipe_control with a CS stall +* and a post sync operation and then a dummy DRAW after +* every MI_SET_CONTEXT and after any PIPELINE_SELECT that +* is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command +* with Indirect Parameter Enable set to 0, UAV Coherency +* Required set to 0, Predicate Enable set to 0, +* End Offset Enable set to 0, and Vertex Count Per Instance +* set to 0, All other parameters are a don't care. +*/ + +/* +* Add a pipe control with CS Stall and postsync op +* before dummy 3D_PRIMITIVE +*/ + flags |=PIPE_CONTROL_QW_WRITE |PIPE_CONTROL_CS_STALL ; +intel_ring_emit (ring,GFX_OP_PIPE_CONTROL (4 )); +intel_ring_emit (ring, flags); +intel_ring_emit (ring, scratch_addr |PIPE_CONTROL_GLOBAL_GTT ); +intel_ring_emit (ring,0 ); + +/* Add a dummy 3D_PRIMITVE */ +intel_ring_emit (ring,GFX_OP_3DPRIMITIVE ()); +intel_ring_emit (ring,4 );/* PrimTopoType*/ +intel_ring_emit (ring,0 );/* VertexCountPerInstance */ +intel_ring_emit (ring,0 );/* StartVertexLocation */ +intel_ring_emit (ring,0 );/* InstanceCount */ +intel_ring_emit (ring,0 );/* StartInstanceLocation */ +intel_ring_emit (ring,0 );/* BaseVertexLocation */ + }else { +int i; +for (i =0 ; i <11 ; i++) +intel_ring_emit (ring,MI_NOOP ); + } +} + static inline int mi_set_context(struct intel_ring_buffer *ring, struct i915_hw_context *new_context,
@@ -601,7 +653,10 @@ mi_set_context(struct intel_ring_buffer *ring,return ret; } - ret =intel_ring_begin (ring,6 ); +if (IS_VALLEYVIEW (ring->dev)) + ret =intel_ring_begin (ring,6 +4 +8 ); +else + ret =intel_ring_begin (ring,6 );if (ret)return ret;
@@ -625,7 +680,13 @@ mi_set_context(struct intel_ring_buffer *ring,intel_ring_emit (ring,MI_NOOP );if (IS_GEN7 (ring->dev)) -intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +if (IS_VALLEYVIEW (ring->dev)) { +/* FIXME, should also apply to ivb */ +mi_set_context_dummy3d_prim_wa (ring); +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +intel_ring_emit (ring,MI_NOOP ); + }else +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE );else intel_ring_emit (ring,MI_NOOP );
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -347,6 +347,9 @@#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)#define PIPE_CONTROL_GLOBAL_GTT (1<<2)/* in addr dword */ +#define GFX_OP_3DPRIMITIVE () \ + ((0x3<<29)|(0x3<<27)|(0x3<<24)| \ + (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))/* * Reset registers
drivers/gpu/drm/i915/intel_ringbuffer.c +9 -0
@@ -560,6 +560,15 @@ err:return ret; } +u32 +get_pipe_control_scratch_addr (struct intel_ring_buffer *ring) +{ +if (ring->scratch.obj ==NULL ) +return 0 ; + +return ring->scratch.gtt_offset; +} +static int init_render_ring (struct intel_ring_buffer *ring) {struct drm_device *dev = ring->dev;
drivers/gpu/drm/i915/intel_ringbuffer.h +1 -0
@@ -294,6 +294,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);u32 intel_ring_get_active_head (struct intel_ring_buffer *ring);void intel_ring_setup_status_page (struct intel_ring_buffer *ring); +u32 get_pipe_control_scratch_addr (struct intel_ring_buffer *ring);static inline u32 intel_ring_get_tail (struct intel_ring_buffer *ring) {
Signature · 1 line
1.8.5.1
Quoted 8 lines · On Sat, Feb 08, 2014 at 02:22:12PM +0530, [email protected] wrote:
From: Akash Goel <[email protected]>
This workaround is needed on VLV for the HW context feature. It is used after adding the
mi_set_contextcommand in ring buffer for Hw context switch. As per the spec
"The software must send apipe_controlwith a CS stall and a post sync operation and then a dummy DRAW after everyMI_SET_CONTEXTand after anyPIPELINE_SELECTthat is enabling 3D mode".
Does this cause a hang? Please mention so if it does.
And for my curiosity, have we actually seen this fix anything in the wild (also nice to have in the commit message for potential backports)?
Quoted 154 lines
v2: Modified the WA comment. (Ville)
Signed-off-by Akash Goel <[email protected]>--- drivers/gpu/drm/i915/i915_gem_context.c | 65 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.c | 9 +++++ drivers/gpu/drm/i915/intel_ringbuffer.h | 1 + 4 files changed, 76 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_gem_context.c +63
-2@@ -541,6 +541,58 @@ i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)return ctx; } +static inline void +mi_set_context_dummy3d_prim_wa (struct intel_ring_buffer *ring) +{ +u32 scratch_addr; +u32 flags =0 ; + +/* +* Check if we have the scratch page allocated needed +* for the Pipe Control command, otherwise don't apply +* the dummmy 3d primitive workaround & add NOOPs instead +*/ +if (get_pipe_control_scratch_addr (ring)) { +/* Actual scratch location is at 128 bytes offset */ + scratch_addr =get_pipe_control_scratch_addr (ring) +128 ; + +/* +* WaSendDummy3dPrimitveAfterSetContext +* Software must send a pipe_control with a CS stall +* and a post sync operation and then a dummy DRAW after +* every MI_SET_CONTEXT and after any PIPELINE_SELECT that +* is enabling 3D mode. A dummy draw is a 3DPRIMITIVE command +* with Indirect Parameter Enable set to 0, UAV Coherency +* Required set to 0, Predicate Enable set to 0, +* End Offset Enable set to 0, and Vertex Count Per Instance +* set to 0, All other parameters are a don't care. +*/ + +/* +* Add a pipe control with CS Stall and postsync op +* before dummy 3D_PRIMITIVE +*/ + flags |=PIPE_CONTROL_QW_WRITE |PIPE_CONTROL_CS_STALL ; +intel_ring_emit (ring,GFX_OP_PIPE_CONTROL (4 )); +intel_ring_emit (ring, flags); +intel_ring_emit (ring, scratch_addr |PIPE_CONTROL_GLOBAL_GTT ); +intel_ring_emit (ring,0 ); + +/* Add a dummy 3D_PRIMITVE */ +intel_ring_emit (ring,GFX_OP_3DPRIMITIVE ()); +intel_ring_emit (ring,4 );/* PrimTopoType*/ +intel_ring_emit (ring,0 );/* VertexCountPerInstance */ +intel_ring_emit (ring,0 );/* StartVertexLocation */ +intel_ring_emit (ring,0 );/* InstanceCount */ +intel_ring_emit (ring,0 );/* StartInstanceLocation */ +intel_ring_emit (ring,0 );/* BaseVertexLocation */ + }else { +int i; +for (i =0 ; i <11 ; i++) +intel_ring_emit (ring,MI_NOOP ); + } +} + static inline int mi_set_context(struct intel_ring_buffer *ring, struct i915_hw_context *new_context,@@ -559,7 +611,10 @@ mi_set_context(struct intel_ring_buffer *ring,return ret; } - ret =intel_ring_begin (ring,6 ); +if (IS_VALLEYVIEW (ring->dev)) + ret =intel_ring_begin (ring,6 +4 +8 ); +else + ret =intel_ring_begin (ring,6 );if (ret)return ret;@@ -583,7 +638,13 @@ mi_set_context(struct intel_ring_buffer *ring,intel_ring_emit (ring,MI_NOOP );if (IS_GEN7 (ring->dev)) -intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +if (IS_VALLEYVIEW (ring->dev)) { +/* FIXME, should also apply to ivb */ +mi_set_context_dummy3d_prim_wa (ring); +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE ); +intel_ring_emit (ring,MI_NOOP ); + }else +intel_ring_emit (ring,MI_ARB_ON_OFF |MI_ARB_ENABLE );else intel_ring_emit (ring,MI_NOOP );drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -335,6 +335,9 @@#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0)#define PIPE_CONTROL_GLOBAL_GTT (1<<2)/* in addr dword */ +#define GFX_OP_3DPRIMITIVE () \ + ((0x3<<29)|(0x3<<27)|(0x3<<24)| \ + (0x0<<16)|(0x0<<10)|(0x0<<8)|(7-2))/* * Reset registers drivers/gpu/drm/i915/intel_ringbuffer.c +9
-0@@ -556,6 +556,15 @@ err:return ret; } +u32 +get_pipe_control_scratch_addr (struct intel_ring_buffer *ring) +{ +if (ring->scratch.obj ==NULL ) +return 0 ; + +return ring->scratch.gtt_offset; +} +static int init_render_ring (struct intel_ring_buffer *ring) {struct drm_device *dev = ring->dev;drivers/gpu/drm/i915/intel_ringbuffer.h +1
-0@@ -259,6 +259,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev);u32 intel_ring_get_active_head (struct intel_ring_buffer *ring);void intel_ring_setup_status_page (struct intel_ring_buffer *ring); +u32 get_pipe_control_scratch_addr (struct intel_ring_buffer *ring);static inline u32 intel_ring_get_tail (struct intel_ring_buffer *ring) {Signature · 6 lines
1.8.5.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center