Skip to contentSkip to conversation

Linux 3.12.10

DISCUSSION Greg KH 4 participants 5 messages Feb 6, 2014 – Feb 9, 2014 Stable branch

lore
Share & tools
lore

Greg KH

author maintainer
#0 lore raw

I'm announcing the release of the 3.12.10 kernel.

All users of the 3.12 kernel series must upgrade.

The updated 3.12.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.12.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

------------

 Documentation/devicetree/bindings/ata/marvell.txt     |    2 
 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt |    6 
 Documentation/i2c/busses/i2c-piix4                    |    2 
 Makefile                                              |    2 
 arch/alpha/lib/csum_partial_copy.c                    |    9 -
 arch/arm/boot/dts/armada-370-xp.dtsi                  |    2 
 arch/arm/boot/dts/at91sam9g45.dtsi                    |    2 
 arch/arm/mach-at91/sam9_smc.c                         |    2 
 arch/arm/mach-mvebu/Makefile                          |    2 
 arch/arm/mach-mvebu/armada-370-xp.c                   |   32 ++++
 arch/arm/mach-mvebu/mvebu-soc-id.c                    |  119 ++++++++++++++
 arch/arm/mach-mvebu/mvebu-soc-id.h                    |   32 ++++
 arch/arm/net/bpf_jit_32.c                             |    6 
 arch/parisc/include/asm/cacheflush.h                  |    2 
 arch/parisc/include/asm/page.h                        |    3 
 arch/parisc/kernel/cache.c                            |   14 +
 arch/powerpc/include/asm/topology.h                   |   10 +
 arch/powerpc/kernel/cacheinfo.c                       |    3 
 arch/powerpc/kvm/book3s_hv.c                          |    7 
 arch/powerpc/kvm/e500_mmu.c                           |    2 
 arch/powerpc/mm/numa.c                                |   70 ++++++++
 arch/powerpc/net/bpf_jit_comp.c                       |    7 
 arch/s390/include/uapi/asm/statfs.h                   |   10 -
 arch/s390/kvm/diag.c                                  |    4 
 arch/s390/net/bpf_jit_comp.c                          |   29 ++-
 arch/sparc/net/bpf_jit_comp.c                         |   17 +-
 arch/x86/include/asm/kvm_para.h                       |   33 +---
 arch/x86/include/uapi/asm/msr-index.h                 |    1 
 arch/x86/kernel/cpu/amd.c                             |   10 +
 arch/x86/kernel/kvm.c                                 |   32 ++++
 arch/x86/kvm/i8254.c                                  |   18 ++
 arch/x86/kvm/lapic.c                                  |    5 
 arch/x86/kvm/x86.c                                    |    3 
 arch/x86/kvm/x86.h                                    |    2 
 arch/x86/net/bpf_jit_comp.c                           |   14 +
 arch/x86/platform/efi/efi.c                           |    2 
 drivers/ata/libata-core.c                             |   27 +++
 drivers/ata/libata-scsi.c                             |   18 +-
 drivers/ata/sata_mv.c                                 |   25 +++
 drivers/char/tpm/tpm_i2c_stm_st33.c                   |    7 
 drivers/char/tpm/tpm_ppi.c                            |    8 -
 drivers/edac/e752x_edac.c                             |    4 
 drivers/gpu/drm/nouveau/core/subdev/bios/init.c       |    8 -
 drivers/hwmon/k10temp.c                               |    1 
 drivers/i2c/busses/Kconfig                            |    1 
 drivers/i2c/busses/i2c-mv64xxx.c                      |    5 
 drivers/i2c/busses/i2c-piix4.c                        |   28 ++-
 drivers/md/bcache/bset.c                              |   26 ++-
 drivers/md/raid5.c                                    |    1 
 drivers/mfd/max77686.c                                |    2 
 drivers/misc/mei/hbm.c                                |   19 ++
 drivers/misc/mei/hbm.h                                |    1 
 drivers/misc/mei/init.c                               |   12 +
 drivers/misc/mei/interrupt.c                          |   25 +--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c       |   13 +
 drivers/net/ethernet/intel/e1000e/phy.c               |   10 -
 drivers/net/ethernet/via/via-rhine.c                  |    1 
 drivers/net/usb/usbnet.c                              |    2 
 drivers/net/vxlan.c                                   |   20 +-
 drivers/net/wireless/ath/ath9k/hw.c                   |    7 
 drivers/net/wireless/ath/ath9k/recv.c                 |   25 +--
 drivers/net/wireless/b43/b43.h                        |    4 
 drivers/net/wireless/b43/main.c                       |   27 ++-
 drivers/net/wireless/b43/xmit.c                       |    4 
 drivers/net/wireless/b43legacy/main.c                 |    1 
 drivers/net/wireless/iwlwifi/iwl-prph.h               |    4 
 drivers/net/wireless/iwlwifi/mvm/ops.c                |    1 
 drivers/net/wireless/iwlwifi/pcie/trans.c             |   22 ++
 drivers/net/wireless/mwifiex/fw.h                     |    2 
 drivers/net/wireless/mwifiex/scan.c                   |    4 
 drivers/net/wireless/rtlwifi/base.c                   |    3 
 drivers/net/wireless/rtlwifi/core.c                   |   11 +
 drivers/net/wireless/rtlwifi/rtl8188ee/dm.c           |    2 
 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c     |   36 ++++
 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h     |   14 +
 drivers/net/wireless/rtlwifi/rtl8192cu/dm.c           |    9 +
 drivers/net/wireless/rtlwifi/rtl8192cu/dm.h           |    3 
 drivers/net/wireless/rtlwifi/rtl8192cu/rf.c           |   29 ++-
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c           |   17 +-
 drivers/net/wireless/rtlwifi/stats.c                  |   14 +
 drivers/net/wireless/rtlwifi/usb.c                    |    4 
 drivers/net/wireless/rtlwifi/wifi.h                   |   33 ++--
 drivers/net/xen-netfront.c                            |   88 +++--------
 drivers/parport/parport_pc.c                          |   10 -
 drivers/pinctrl/pinctrl-sunxi.c                       |   13 -
 drivers/platform/x86/hp_accel.c                       |    1 
 drivers/rtc/rtc-max8907.c                             |   11 -
 drivers/scsi/bfa/bfad.c                               |    6 
 drivers/scsi/virtio_scsi.c                            |   15 +
 drivers/staging/lustre/lustre/ptlrpc/niobuf.c         |    6 
 drivers/staging/rtl8712/usb_intf.c                    |    5 
 drivers/staging/vt6656/baseband.c                     |    3 
 drivers/staging/vt6656/card.c                         |    2 
 drivers/staging/zram/zram_drv.c                       |    4 
 drivers/target/iscsi/iscsi_target.c                   |   34 ++--
 drivers/target/iscsi/iscsi_target_nego.c              |    2 
 drivers/tty/serial/8250/8250_core.c                   |    4 
 drivers/tty/serial/8250/8250_pci.c                    |    8 -
 drivers/tty/serial/atmel_serial.c                     |   45 +++--
 drivers/usb/chipidea/ci.h                             |   26 +++
 drivers/usb/chipidea/ci_hdrc_imx.c                    |   32 +++-
 drivers/usb/chipidea/core.c                           |    2 
 drivers/usb/chipidea/host.c                           |    1 
 drivers/usb/chipidea/otg.h                            |    6 
 drivers/usb/chipidea/udc.c                            |   19 ++
 drivers/usb/core/config.c                             |    7 
 drivers/usb/core/hub.c                                |   54 ++----
 drivers/usb/host/ehci.h                               |   18 ++
 drivers/usb/host/xhci-ring.c                          |    2 
 drivers/usb/host/xhci.c                               |    7 
 drivers/usb/host/xhci.h                               |    2 
 drivers/usb/serial/cypress_m8.h                       |    2 
 drivers/usb/serial/ftdi_sio.c                         |   17 +-
 drivers/usb/serial/option.c                           |   15 +
 drivers/usb/serial/pl2303.c                           |   34 +++-
 drivers/usb/storage/unusual_devs.h                    |    7 
 fs/btrfs/extent-tree.c                                |    2 
 fs/btrfs/ioctl.c                                      |    6 
 fs/dcache.c                                           |    1 
 fs/ext4/inline.c                                      |    8 -
 fs/hpfs/alloc.c                                       |   66 ++++++++
 fs/hpfs/hpfs_fn.h                                     |    2 
 fs/hpfs/super.c                                       |   29 ++-
 fs/mount.h                                            |    2 
 include/linux/hugetlb.h                               |    6 
 include/linux/libata.h                                |    2 
 include/linux/usb/chipidea.h                          |    1 
 mm/hugetlb.c                                          |   17 ++
 mm/mempolicy.c                                        |    2 
 mm/swap.c                                             |  143 ++++++++++--------
 net/compat.c                                          |    9 -
 net/core/filter.c                                     |   30 ---
 net/ieee802154/nl-phy.c                               |    6 
 net/ipv4/fib_frontend.c                               |    2 
 net/ipv4/inet_diag.c                                  |    4 
 net/ipv4/ip_gre.c                                     |    2 
 net/ipv4/ip_input.c                                   |    2 
 net/ipv4/ip_tunnel.c                                  |    1 
 net/ipv4/ipmr.c                                       |    7 
 net/ipv4/tcp_metrics.c                                |   51 ++++--
 net/ipv6/ip6_input.c                                  |    2 
 net/ipv6/ip6mr.c                                      |    7 
 net/rds/ib_recv.c                                     |    7 
 sound/core/init.c                                     |    4 
 sound/pci/Kconfig                                     |   12 +
 sound/pci/hda/hda_generic.c                           |    6 
 sound/pci/hda/patch_analog.c                          |   22 +-
 sound/pci/hda/patch_hdmi.c                            |  100 +++++++++---
 sound/pci/hda/patch_realtek.c                         |   19 ++
 sound/pci/rme9652/rme9652.c                           |    2 
 sound/soc/codecs/adau1701.c                           |    2 
 sound/soc/codecs/wm5110.c                             |   48 ++++++
 tools/perf/util/session.c                             |    7 
 153 files changed, 1608 insertions(+), 595 deletions(-)

Adrien Vergé (1):
ALSA: hda - Fix silent output on MacBook Air 1,1

Alan Stern (1):
USB: fix race between hub_disconnect and recursively_mark_NOTATTACHED

Amir Shehata (1):
staging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer

Amitkumar Karwar (1):
mwifiex: add missing endian conversion for fw_tsf

Andrea Arcangeli (1):
mm: hugetlbfs: fix hugetlbfs optimization

Andreas Schwab (1):
KVM: PPC: Book3S HV: use xics_wake_cpu only when defined

Andrew Jones (1):
kvm: x86: fix apic_base enable check

Andy Grover (1):
target/iscsi: Fix network portal creation race

Annie Li (1):
xen-netfront: fix resource leak in netfront

Anssi Hannula (1):
ALSA: hda - hdmi: introduce patch_nvhdmi()

Aristeu Rozanski (1):
e752x_edac: Fix pci_dev usage count

Asias He (1):
virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze

Ben Hutchings (1):
xhci: Avoid infinite loop when sg urb requires too many trbs

Bing Zhao (1):
mwifiex: fix wrong 11ac bits setting in fw_cap_info

Bjørn Mork (1):
net: usbnet: fix SG initialisation

Borislav Petkov (1):
x86, cpu, amd: Add workaround for family 16h, erratum 793

Charles Keepax (1):
ASoC: wm5110: Extend SYSCLK patch file for rev D

Chen-Yu Tsai (1):
pinctrl: sunxi: Honor GPIO output initial vaules

Christian Engelmayer (1):

      ieee802154: Fix memory leak in ieee802154_add_iface()

Christoph Paasch (1):
tcp: metrics: Avoid duplicate entries with the same destination-IP

Colin Leitner (1):
USB: ftdi_sio: added CS5 quirk for broken smartcard readers

Dan Carpenter (1):
ALSA: bits vs bytes bug in snd_card_create()

Dave Young (1):
x86/efi: Fix off-by-one bug in EFI Boot Services reservation

David Ertman (1):
e1000e: fix compiler warnings

David Rientjes (1):
mm/mempolicy.c: fix mempolicy printing in numa_maps

David Sterba (1):
btrfs: restrict snapshotting to own subvolumes

Dominik Dingel (1):
KVM: s390: ioeventfd: ignore leftmost bits

Dongsheng Yang (1):
perf kvm: Fix kvm report without guestmount.

Duan Jiong (2):
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net: gre: use icmp_hdr() to get inner ip header

Eliad Peller (1):
iwlwifi: mvm: fix missing cleanup in .start() error path

Emmanuel Grumbach (1):
iwlwifi: pcie: enable oscillator for L1 exit

Eric Dumazet (1):
bpf: do not use reciprocal divide

Eric W. Biederman (2):
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.

Gerald Schaefer (1):
net: rds: fix per-cpu helper usage

Greg Kroah-Hartman (1):

      Linux 3.12.10

Gregory CLEMENT (4):
ARM: mvebu: Add support to get the ID and the revision of a SoC
ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board
i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs
i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible

Hannes Frederic Sowa (1):
net: avoid reference counter overflows on fib_rules in multicast forwarding

Heiko Carstens (3):
KVM: s390: fix diagnose code extraction
s390/uapi: fix struct statfs64 definition
s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions

Helge Deller (1):
parisc: fix cache-flushing

Holger Eitzenberger (1):
net: Fix memory leak if TPROXY used with TCP early demux

Ilia Mirkin (1):
drm/nouveau/bios: fix offset calculation for BMPv1 bioses

Jack Pham (1):
usb: xhci: Check for XHCI_PLAT in xhci_cleanup_msix()

Jean-Jacques Hiblot (1):
ARM: at91: smc: bug fix in sam9_smc_cs_read()

Johan Hovold (2):
USB: pl2303: fix data corruption on termios updates
USB: cypress_m8: fix ring-indicator detection and reporting

Jonathan Woithe (1):
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip

Kent Overstreet (1):
bcache: Data corruption fix

Krzysztof Kozlowski (1):
mfd: max77686: Fix regmap resource leak on driver remove

Larry Finger (17):
rtlwifi: rtl8192cu: Add new device ID
rtlwifi: Update beacon statistics for USB driver
rtlwifi: rtl8192c: Prevent reconnect attempts if not connected
rtlwifi: rtl8192cu: Add new firmware
rtlwifi: Redo register save locations
rtlwifi: Set the link state
rtlwifi: rtl8192c: Add new definitions in the dm_common header
rtlwifi: Increase the RX queue length for USB drivers
rtlwifi: rtl8192c: Add routines to save/restore power index registers
rtlwifi: rtl8192cu: Update the power index registers
rtlwifi: rtl8192cu: Fix some code in RF handling
rtlwifi: Add missing code to PWDB statics routine
rtlwifi: rtl8188ee: Fix typo in code
b43: Fix lockdep splat
b43: Fix unload oops if firmware is not available
b43legacy: Fix unload oops if firmware is not available
staging: r8712u: Set device type to wlan

Lars-Peter Clausen (1):

      ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constant

Lior Amsalem (1):
ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs

Ludovic Desroches (1):
ARM: at91: at91sam9g45: set default mmc pinctrl-names

Malcolm Priestley (2):
staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning
staging: vt6656: CARDqGetNextTBTT correct uLowNextTBTT

Marcelo Tosatti (1):
KVM: x86: limit PIT timer frequency

Marek Roszko (3):
tty/serial: at91: Handle shutdown more safely tty/serial: at91: fix race condition in atmel_serial_remove tty/serial: at91: disable uart timer at start of shutdown

Mark Deneen (1):
tty/serial: at91: reset rx_ring when port is shutdown

Michal Schmidt (1):
bnx2x: fix DMA unmapping of TSO split BDs

Mihai Caraman (1):
KVM: PPC: e500: Fix bad address type in deliver_tlb_misss()

Mikhail Zolotaryov (1):
USB: Nokia 502 is an unusual device

Mikulas Patocka (2):
alpha: fix broken network checksum
hpfs: remember free space

Minchan Kim (1):
zram: fix race between reset and flushing pending work

Neal Cardwell (1):
inet_diag: fix inet_diag_dump_icsk() timewait socket state logic

NeilBrown (1):
md/raid5: fix long-standing problem with bitmap handling on write failure.

Nicholas Bellinger (1):
iscsi-target: Pre-allocate more tags to avoid ack starvation

Oliver Hartkopp (1):
fib_frontend: fix possible NULL pointer dereference

Or Gerlitz (1):
net/vxlan: Share RX skb de-marking and checksum checks with ovs

PaX Team (1):
x86, x32: Correct invalid use of user timespec in the kernel

Paolo Bonzini (2):
x86, kvm: cache the base of the KVM cpuid leaves
x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101

Paul Mackerras (1):
powerpc: Make sure "cache" directory is removed when offlining cpu

Peter Chen (5):
usb: chipidea: add freescale imx28 special write register method
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: ehci: add freescale imx28 special write register method

Peter Huewe (2):
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount tpm/tpm_ppi: Do not compare strcmp(a,b) == -1

Phil Pokorny (1):
hwmon: (k10temp) Add support for Kaveri CPUs

Rahul Bedarkar (1):
USB: serial: add support for iBall 3.5G connect usb modem

Richard Weinberger (1):
net,via-rhine: Fix tx_timeout handling

Sarah Sharp (1):
xhci: Set scatter-gather limit to avoid failed block writes.

Sebastian Andrzej Siewior (1):
parport: parport_pc: remove double PCI ID for NetMos

Shane Huang (1):
i2c: piix4: Add support for AMD ML and CZ SMBus changes

Simon Guinot (2):
ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
ARM: mvebu: update the SATA compatible string for Armada 370/XP

Srivatsa S. Bhat (1):
powerpc: Fix the setup of CPU-to-Node mappings during CPU online

Stephen Warren (3):
serial: 8250: enable UART_BUG_NOMSR for Tegra
rtc: max8907: weekday encoding fixes
ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled

Sujith Manoharan (2):
ath9k: Use correct channel for RX packets
ath9k: Disable cross-band FCC

Takashi Iwai (6):
ALSA: rme9652: fix a missing comma in channel_map_9636_ds[]
ALSA: hda - Correct AD1986A 3stack pin configs
ALSA: hda - Don't create duplicated ctls for loopback paths
ALSA: Enable CONFIG_ZONE_DMA for smaller PCI DMA masks
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
ALSA: hda - Don't set indep_hp flag for old AD codecs

Tejun Heo (1):
libata: disable LPM for some WD SATA-I devices

Theodore Ts'o (1):
ext4: avoid clearing beyond i_blocks when truncating an inline data file

Thomas Pugliese (1):
usb: core: get config and string descriptors for unauthorized devices

Tomas Winkler (1):
mei: use hbm idle state to prevent spurious resets

Vijaya Mohan Guvva (1):
SCSI: bfa: Chinook quad port 16G FC HBA claim issue

Wang Shilong (1):
Btrfs: handle EAGAIN case properly in btrfs_drop_snapshot()

Yegor Yefremov (1):
serial: add support for 200 v3 series Titan card

ZHAO Gang (1):
b43: fix the wrong assignment of status.freq in b43_rx()

张君 (1):
usb: option: add new zte 3g modem pids to option driver

author maintainer
#1 lore raw
Documentation/devicetree/bindings/ata/marvell.txt +1 -1
index b5cdd20cde9c..1c8351604d38 100644
@@ -1,7 +1,7 @@
 * Marvell Orion SATA
 
 Required Properties:
-- compatibility : "marvell,orion-sata"
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
 - reg           : Address range of controller
 - interrupts    : Interrupt controller is using
 - nr-ports      : Number of SATA ports in use.
Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +5 -1
index 82e8f6f17179..582b4652a82a 100644
@@ -5,7 +5,11 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
-                     or "marvell,mv78230-i2c"
+                     or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
+                     Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
+                     initial version of the SoC which had broken offload
+                     support.  Linux auto-detects this and sets it
+                     appropriately.
  - interrupts      : The interrupt number
 
 Optional properties :
Documentation/i2c/busses/i2c-piix4 +1 -1
index c097e0f020fe..aa959fd22450 100644
@@ -13,7 +13,7 @@ Supported adapters:
   * AMD SP5100 (SB700 derivative found on some server mainboards)
     Datasheet: Publicly available at the AMD website
     http://support.amd.com/us/Embedded_TechDocs/44413.pdf
-  * AMD Hudson-2, CZ
+  * AMD Hudson-2, ML, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
Makefile +1 -1
index 4ee77eaa7b1f..49b64402f947 100644
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 12
-SUBLEVEL = 9
+SUBLEVEL = 10
 EXTRAVERSION =
 NAME = One Giant Leap for Frogkind
 
arch/alpha/lib/csum_partial_copy.c +7 -2
index ffb19b7da999..9df43dfe511e 100644
@@ -378,6 +378,11 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
 {
-	return csum_partial_copy_from_user((__force const void __user *)src,
-			dst, len, sum, NULL);
+	__wsum checksum;
+	mm_segment_t oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	checksum = csum_partial_copy_from_user((__force const void __user *)src,
+						dst, len, sum, NULL);
+	set_fs(oldfs);
+	return checksum;
 }
arch/arm/boot/dts/armada-370-xp.dtsi +1 -1
index b97ab017d4a2..364a63dce6c5 100644
@@ -143,7 +143,7 @@
 			};
 
 			sata@a0000 {
-				compatible = "marvell,orion-sata";
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
 				clocks = <&gateclk 15>, <&gateclk 30>;
arch/arm/boot/dts/at91sam9g45.dtsi +2 -0
index c3e514837074..cf7de80377f1 100644
@@ -618,6 +618,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -629,6 +630,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
arch/arm/mach-at91/sam9_smc.c +1 -1
index 99a0a1d2b7dc..b26156bf15db 100644
@@ -101,7 +101,7 @@ static void sam9_smc_cs_read(void __iomem *base,
 	/* Pulse register */
 	val = __raw_readl(base + AT91_SMC_PULSE);
 
-	config->nwe_setup = val & AT91_SMC_NWEPULSE;
+	config->nwe_pulse = val & AT91_SMC_NWEPULSE;
 	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
 	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
 	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
arch/arm/mach-mvebu/Makefile +1 -1
index 2d04f0e21870..878aebe98dcc 100644
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 
-obj-y				 += system-controller.o
+obj-y				 += system-controller.o mvebu-soc-id.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
 obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
arch/arm/mach-mvebu/armada-370-xp.c +32 -0
index e2acff98e750..f6c9d1d85c14 100644
@@ -21,6 +21,7 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
+#include <linux/slab.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -28,6 +29,7 @@
 #include "armada-370-xp.h"
 #include "common.h"
 #include "coherency.h"
+#include "mvebu-soc-id.h"
 
 static void __init armada_370_xp_map_io(void)
 {
@@ -45,8 +47,38 @@ static void __init armada_370_xp_timer_and_clk_init(void)
 #endif
 }
 
+static void __init i2c_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	/*
+	 * Only revisons more recent than A0 support the offload
+	 * mechanism. We can exit only if we are sure that we can
+	 * get the SoC revision and it is more recent than A0.
+	 */
+	if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+		struct property *new_compat;
+
+		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+		new_compat->name = kstrdup("compatible", GFP_KERNEL);
+		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+						GFP_KERNEL);
+
+		of_update_property(np, new_compat);
+	}
+	return;
+}
+
 static void __init armada_370_xp_dt_init(void)
 {
+	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+		i2c_quirk();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
arch/arm/mach-mvebu/mvebu-soc-id.c new file +119 -0

119 lines not on this page · raw message

arch/arm/mach-mvebu/mvebu-soc-id.h new file +32 -0
new file mode 100644
index 000000000000..31654252fe35
@@ -0,0 +1,32 @@
+/*
+ * Marvell EBU SoC ID and revision definitions.
+ *
+ * Copyright (C) 2014 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MVEBU_SOC_ID_H
+#define __LINUX_MVEBU_SOC_ID_H
+
+/* Armada XP ID */
+#define MV78230_DEV_ID	    0x7823
+#define MV78260_DEV_ID	    0x7826
+#define MV78460_DEV_ID	    0x7846
+
+/* Armada XP Revision */
+#define MV78XX0_A0_REV	    0x1
+#define MV78XX0_B0_REV	    0x2
+
+#ifdef CONFIG_ARCH_MVEBU
+int mvebu_get_soc_id(u32 *dev, u32 *rev);
+#else
+static inline int mvebu_get_soc_id(u32 *dev, u32 *rev)
+{
+	return -1;
+}
+#endif
+
+#endif /* __LINUX_MVEBU_SOC_ID_H */
arch/arm/net/bpf_jit_32.c +3 -3
index 99b44e0e8d86..8c9106fd8163 100644
@@ -637,10 +637,10 @@ load_ind:
 			emit(ARM_MUL(r_A, r_A, r_X), ctx);
 			break;
 		case BPF_S_ALU_DIV_K:
-			/* current k == reciprocal_value(userspace k) */
+			if (k == 1)
+				break;
 			emit_mov_i(r_scratch, k, ctx);
-			/* A = top 32 bits of the product */
-			emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx);
+			emit_udiv(r_A, r_A, r_scratch, ctx);
 			break;
 		case BPF_S_ALU_DIV_X:
 			update_on_xread(ctx);
arch/parisc/include/asm/cacheflush.h +0 -2
index 2f9b751878ba..de65f66ea64e 100644
@@ -132,7 +132,6 @@ void mark_rodata_ro(void);
 static inline void *kmap(struct page *page)
 {
 	might_sleep();
-	flush_dcache_page(page);
 	return page_address(page);
 }
 
@@ -144,7 +143,6 @@ static inline void kunmap(struct page *page)
 static inline void *kmap_atomic(struct page *page)
 {
 	pagefault_disable();
-	flush_dcache_page(page);
 	return page_address(page);
 }
 
arch/parisc/include/asm/page.h +2 -1
index c53fc63149e8..637fe031aa84 100644
@@ -29,7 +29,8 @@ struct page;
 void clear_page_asm(void *page);
 void copy_page_asm(void *to, void *from);
 #define clear_user_page(vto, vaddr, page) clear_page_asm(vto)
-#define copy_user_page(vto, vfrom, vaddr, page) copy_page_asm(vto, vfrom)
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+			struct page *pg);
 
 /* #define CONFIG_PARISC_TMPALIAS */
 
arch/parisc/kernel/cache.c +14 -0
index a72545554a31..ac87a40502e6 100644
@@ -388,6 +388,20 @@ void flush_kernel_dcache_page_addr(void *addr)
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
 
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+	struct page *pg)
+{
+       /* Copy using kernel mapping.  No coherency is needed (all in
+	  kunmap) for the `to' page.  However, the `from' page needs to
+	  be flushed through a mapping equivalent to the user mapping
+	  before it can be accessed through the kernel mapping. */
+	preempt_disable();
+	flush_dcache_page_asm(__pa(vfrom), vaddr);
+	preempt_enable();
+	copy_page_asm(vto, vfrom);
+}
+EXPORT_SYMBOL(copy_user_page);
+
 void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 {
 	unsigned long flags;
arch/powerpc/include/asm/topology.h +9 -1
index 89e3ef2496ac..d0b5fca6b077 100644
@@ -22,7 +22,15 @@ struct device_node;
 
 static inline int cpu_to_node(int cpu)
 {
-	return numa_cpu_lookup_table[cpu];
+	int nid;
+
+	nid = numa_cpu_lookup_table[cpu];
+
+	/*
+	 * During early boot, the numa-cpu lookup table might not have been
+	 * setup for all CPUs yet. In such cases, default to node 0.
+	 */
+	return (nid < 0) ? 0 : nid;
 }
 
 #define parent_node(node)	(node)
arch/powerpc/kernel/cacheinfo.c +3 -0
index 654932727873..bfb82365bc7a 100644
@@ -794,6 +794,9 @@ static void remove_cache_dir(struct cache_dir *cache_dir)
 {
 	remove_index_dirs(cache_dir);
 
+	/* Remove cache dir from sysfs */
+	kobject_del(cache_dir->kobj);
+
 	kobject_put(cache_dir->kobj);
 
 	kfree(cache_dir);
arch/powerpc/kvm/book3s_hv.c +6 -1
index 62a2b5ab08ed..e1ab62e0d548 100644
@@ -82,10 +82,13 @@ void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
 
 	/* CPU points to the first thread of the core */
 	if (cpu != me && cpu >= 0 && cpu < nr_cpu_ids) {
+#ifdef CONFIG_KVM_XICS
 		int real_cpu = cpu + vcpu->arch.ptid;
 		if (paca[real_cpu].kvm_hstate.xics_phys)
 			xics_wake_cpu(real_cpu);
-		else if (cpu_online(cpu))
+		else
+#endif
+		if (cpu_online(cpu))
 			smp_send_reschedule(cpu);
 	}
 	put_cpu();
@@ -1089,7 +1092,9 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu)
 	smp_wmb();
 #if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
 	if (vcpu->arch.ptid) {
+#ifdef CONFIG_KVM_XICS
 		xics_wake_cpu(cpu);
+#endif
 		++vc->n_woken;
 	}
 #endif
arch/powerpc/kvm/e500_mmu.c +1 -1
index 6d6f153b6c1d..c17600de7d59 100644
@@ -127,7 +127,7 @@ static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500,
 }
 
 static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
-		unsigned int eaddr, int as)
+		gva_t eaddr, int as)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 	unsigned int victim, tsized;
arch/powerpc/mm/numa.c +67 -3

111 lines not on this page · raw message

arch/powerpc/net/bpf_jit_comp.c +4 -3
index 2345bdb4d917..ebbb2f1408ff 100644
@@ -209,10 +209,11 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			}
 			PPC_DIVWU(r_A, r_A, r_X);
 			break;
-		case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+		case BPF_S_ALU_DIV_K: /* A /= K */
+			if (K == 1)
+				break;
 			PPC_LI32(r_scratch1, K);
-			/* Top 32 bits of 64bit result -> A */
-			PPC_MULHWU(r_A, r_A, r_scratch1);
+			PPC_DIVWU(r_A, r_A, r_scratch1);
 			break;
 		case BPF_S_ALU_AND_X:
 			ctx->seen |= SEEN_XREG;
arch/s390/include/uapi/asm/statfs.h +5 -5
index a61d538756f2..471eb09184d4 100644
@@ -35,11 +35,11 @@ struct statfs {
 struct statfs64 {
 	unsigned int	f_type;
 	unsigned int	f_bsize;
-	unsigned long	f_blocks;
-	unsigned long	f_bfree;
-	unsigned long	f_bavail;
-	unsigned long	f_files;
-	unsigned long	f_ffree;
+	unsigned long long f_blocks;
+	unsigned long long f_bfree;
+	unsigned long long f_bavail;
+	unsigned long long f_files;
+	unsigned long long f_ffree;
 	__kernel_fsid_t f_fsid;
 	unsigned int	f_namelen;
 	unsigned int	f_frsize;
arch/s390/kvm/diag.c +2 -2
index 3a74d8af0d69..d88e846a58f1 100644
@@ -122,7 +122,7 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)
 	 * - gpr 4 contains the index on the bus (optionally)
 	 */
 	ret = kvm_io_bus_write_cookie(vcpu->kvm, KVM_VIRTIO_CCW_NOTIFY_BUS,
-				      vcpu->run->s.regs.gprs[2],
+				      vcpu->run->s.regs.gprs[2] & 0xffffffff,
 				      8, &vcpu->run->s.regs.gprs[3],
 				      vcpu->run->s.regs.gprs[4]);
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
@@ -139,7 +139,7 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)
 
 int kvm_s390_handle_diag(struct kvm_vcpu *vcpu)
 {
-	int code = (vcpu->arch.sie_block->ipb & 0xfff0000) >> 16;
+	int code = kvm_s390_get_base_disp_rs(vcpu) & 0xffff;
 
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
arch/s390/net/bpf_jit_comp.c +18 -11
index a5df511e27a2..96a4b150f958 100644
@@ -368,14 +368,16 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
 		EMIT4_PCREL(0xa7840000, (jit->ret0_ip - jit->prg));
 		/* lhi %r4,0 */
 		EMIT4(0xa7480000);
-		/* dr %r4,%r12 */
-		EMIT2(0x1d4c);
+		/* dlr %r4,%r12 */
+		EMIT4(0xb997004c);
 		break;
-	case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K) */
-		/* m %r4,<d(K)>(%r13) */
-		EMIT4_DISP(0x5c40d000, EMIT_CONST(K));
-		/* lr %r5,%r4 */
-		EMIT2(0x1854);
+	case BPF_S_ALU_DIV_K: /* A /= K */
+		if (K == 1)
+			break;
+		/* lhi %r4,0 */
+		EMIT4(0xa7480000);
+		/* dl %r4,<d(K)>(%r13) */
+		EMIT6_DISP(0xe340d000, 0x0097, EMIT_CONST(K));
 		break;
 	case BPF_S_ALU_MOD_X: /* A %= X */
 		jit->seen |= SEEN_XREG | SEEN_RET0;
@@ -385,16 +387,21 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
 		EMIT4_PCREL(0xa7840000, (jit->ret0_ip - jit->prg));
 		/* lhi %r4,0 */
 		EMIT4(0xa7480000);
-		/* dr %r4,%r12 */
-		EMIT2(0x1d4c);
+		/* dlr %r4,%r12 */
+		EMIT4(0xb997004c);
 		/* lr %r5,%r4 */
 		EMIT2(0x1854);
 		break;
 	case BPF_S_ALU_MOD_K: /* A %= K */
+		if (K == 1) {
+			/* lhi %r5,0 */
+			EMIT4(0xa7580000);
+			break;
+		}
 		/* lhi %r4,0 */
 		EMIT4(0xa7480000);
-		/* d %r4,<d(K)>(%r13) */
-		EMIT4_DISP(0x5d40d000, EMIT_CONST(K));
+		/* dl %r4,<d(K)>(%r13) */
+		EMIT6_DISP(0xe340d000, 0x0097, EMIT_CONST(K));
 		/* lr %r5,%r4 */
 		EMIT2(0x1854);
 		break;
arch/sparc/net/bpf_jit_comp.c +14 -3
index 218b6b23c378..01fe9946d388 100644
@@ -497,9 +497,20 @@ void bpf_jit_compile(struct sk_filter *fp)
 			case BPF_S_ALU_MUL_K:	/* A *= K */
 				emit_alu_K(MUL, K);
 				break;
-			case BPF_S_ALU_DIV_K:	/* A /= K */
-				emit_alu_K(MUL, K);
-				emit_read_y(r_A);
+			case BPF_S_ALU_DIV_K:	/* A /= K with K != 0*/
+				if (K == 1)
+					break;
+				emit_write_y(G0);
+#ifdef CONFIG_SPARC32
+				/* The Sparc v8 architecture requires
+				 * three instructions between a %y
+				 * register write and the first use.
+				 */
+				emit_nop();
+				emit_nop();
+				emit_nop();
+#endif
+				emit_alu_K(DIV, K);
 				break;
 			case BPF_S_ALU_DIV_X:	/* A /= X; */
 				emit_cmpi(r_X, 0);
arch/x86/include/asm/kvm_para.h +12 -21
index 1df115909758..c7678e43465b 100644
@@ -85,28 +85,9 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
 	return ret;
 }
 
-static inline uint32_t kvm_cpuid_base(void)
-{
-	if (boot_cpu_data.cpuid_level < 0)
-		return 0;	/* So we don't blow up on old processors */
-
-	if (cpu_has_hypervisor)
-		return hypervisor_cpuid_base("KVMKVMKVM\0\0\0", 0);
-
-	return 0;
-}
-
-static inline bool kvm_para_available(void)
-{
-	return kvm_cpuid_base() != 0;
-}
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return cpuid_eax(KVM_CPUID_FEATURES);
-}
-
 #ifdef CONFIG_KVM_GUEST
+bool kvm_para_available(void);
+unsigned int kvm_arch_para_features(void);
 void __init kvm_guest_init(void);
 void kvm_async_pf_task_wait(u32 token);
 void kvm_async_pf_task_wake(u32 token);
@@ -126,6 +107,16 @@ static inline void kvm_spinlock_init(void)
 #define kvm_async_pf_task_wait(T) do {} while(0)
 #define kvm_async_pf_task_wake(T) do {} while(0)
 
+static inline bool kvm_para_available(void)
+{
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
 static inline u32 kvm_read_and_reset_pf_reason(void)
 {
 	return 0;
arch/x86/include/uapi/asm/msr-index.h +1 -0
index bb0465090ae5..228d95f6592a 100644
@@ -182,6 +182,7 @@
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
 #define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
 #define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD64_LS_CFG		0xc0011020
 #define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_BU_CFG2		0xc001102a
 #define MSR_AMD64_IBSFETCHCTL		0xc0011030
arch/x86/kernel/cpu/amd.c +10 -0
index 903a264af981..28233b9e45cc 100644
@@ -508,6 +508,16 @@ static void early_init_amd(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
 	}
 #endif
+
+	/* F16h erratum 793, CVE-2013-6885 */
+	if (c->x86 == 0x16 && c->x86_model <= 0xf) {
+		u64 val;
+
+		rdmsrl(MSR_AMD64_LS_CFG, val);
+		if (!(val & BIT(15)))
+			wrmsrl(MSR_AMD64_LS_CFG, val | BIT(15));
+	}
+
 }
 
 static const int amd_erratum_383[];
arch/x86/kernel/kvm.c +32 -0
index b2046e4d0b59..f022c54a79a4 100644
@@ -500,6 +500,38 @@ void __init kvm_guest_init(void)
 #endif
 }
 
+static noinline uint32_t __kvm_cpuid_base(void)
+{
+	if (boot_cpu_data.cpuid_level < 0)
+		return 0;	/* So we don't blow up on old processors */
+
+	if (cpu_has_hypervisor)
+		return hypervisor_cpuid_base("KVMKVMKVM\0\0\0", 0);
+
+	return 0;
+}
+
+static inline uint32_t kvm_cpuid_base(void)
+{
+	static int kvm_cpuid_base = -1;
+
+	if (kvm_cpuid_base == -1)
+		kvm_cpuid_base = __kvm_cpuid_base();
+
+	return kvm_cpuid_base;
+}
+
+bool kvm_para_available(void)
+{
+	return kvm_cpuid_base() != 0;
+}
+EXPORT_SYMBOL_GPL(kvm_para_available);
+
+unsigned int kvm_arch_para_features(void)
+{
+	return cpuid_eax(kvm_cpuid_base() | KVM_CPUID_FEATURES);
+}
+
 static uint32_t __init kvm_detect(void)
 {
 	return kvm_cpuid_base();
arch/x86/kvm/i8254.c +18 -0
index 412a5aa0ef94..518d86471b76 100644
@@ -37,6 +37,7 @@
 
 #include "irq.h"
 #include "i8254.h"
+#include "x86.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -349,6 +350,23 @@ static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
 	atomic_set(&ps->pending, 0);
 	ps->irq_ack = 1;
 
+	/*
+	 * Do not allow the guest to program periodic timers with small
+	 * interval, since the hrtimers are not throttled by the host
+	 * scheduler.
+	 */
+	if (ps->is_periodic) {
+		s64 min_period = min_timer_period_us * 1000LL;
+
+		if (ps->period < min_period) {
+			pr_info_ratelimited(
+			    "kvm: requested %lld ns "
+			    "i8254 timer period limited to %lld ns\n",
+			    ps->period, min_period);
+			ps->period = min_period;
+		}
+	}
+
 	hrtimer_start(&ps->timer, ktime_add_ns(ktime_get(), interval),
 		      HRTIMER_MODE_ABS);
 }
arch/x86/kvm/lapic.c +1 -4
index 1673940cf9c3..d86ff15fc89f 100644
@@ -71,9 +71,6 @@
 #define VEC_POS(v) ((v) & (32 - 1))
 #define REG_POS(v) (((v) >> 5) << 4)
 
-static unsigned int min_timer_period_us = 500;
-module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
-
 static inline void apic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
 {
 	*((u32 *) (apic->regs + reg_off)) = val;
@@ -1355,7 +1352,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 	vcpu->arch.apic_base = value;
 
 	/* update jump label if enable bit changes */
-	if ((vcpu->arch.apic_base ^ value) & MSR_IA32_APICBASE_ENABLE) {
+	if ((old_value ^ value) & MSR_IA32_APICBASE_ENABLE) {
 		if (value & MSR_IA32_APICBASE_ENABLE)
 			static_key_slow_dec_deferred(&apic_hw_disabled);
 		else
arch/x86/kvm/x86.c +3 -0
index eb9b9c9fc3d9..16dc55a39fa3 100644
@@ -94,6 +94,9 @@ EXPORT_SYMBOL_GPL(kvm_x86_ops);
 static bool ignore_msrs = 0;
 module_param(ignore_msrs, bool, S_IRUGO | S_IWUSR);
 
+unsigned int min_timer_period_us = 500;
+module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
+
 bool kvm_has_tsc_control;
 EXPORT_SYMBOL_GPL(kvm_has_tsc_control);
 u32  kvm_max_guest_tsc_khz;
arch/x86/kvm/x86.h +2 -0
index e224f7a671b6..3186542f2fa3 100644
@@ -124,5 +124,7 @@ int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
 
 extern u64 host_xcr0;
 
+extern unsigned int min_timer_period_us;
+
 extern struct static_key kvm_no_apic_vcpu;
 #endif
arch/x86/net/bpf_jit_comp.c +10 -4
index 26328e800869..4ed75dd81d05 100644
@@ -359,15 +359,21 @@ void bpf_jit_compile(struct sk_filter *fp)
 				EMIT2(0x89, 0xd0);	/* mov %edx,%eax */
 				break;
 			case BPF_S_ALU_MOD_K: /* A %= K; */
+				if (K == 1) {
+					CLEAR_A();
+					break;
+				}
 				EMIT2(0x31, 0xd2);	/* xor %edx,%edx */
 				EMIT1(0xb9);EMIT(K, 4);	/* mov imm32,%ecx */
 				EMIT2(0xf7, 0xf1);	/* div %ecx */
 				EMIT2(0x89, 0xd0);	/* mov %edx,%eax */
 				break;
-			case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
-				EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
-				EMIT(K, 4);
-				EMIT4(0x48, 0xc1, 0xe8, 0x20); /* shr $0x20,%rax */
+			case BPF_S_ALU_DIV_K: /* A /= K */
+				if (K == 1)
+					break;
+				EMIT2(0x31, 0xd2);	/* xor %edx,%edx */
+				EMIT1(0xb9);EMIT(K, 4);	/* mov imm32,%ecx */
+				EMIT2(0xf7, 0xf1);	/* div %ecx */
 				break;
 			case BPF_S_ALU_AND_X:
 				seen |= SEEN_XREG;
arch/x86/platform/efi/efi.c +1 -1
index 220fa52b9bd0..f19284d87dfe 100644
@@ -440,7 +440,7 @@ void __init efi_reserve_boot_services(void)
 		 * - Not within any part of the kernel
 		 * - Not the bios reserved area
 		*/
-		if ((start+size >= __pa_symbol(_text)
+		if ((start + size > __pa_symbol(_text)
 				&& start <= __pa_symbol(_end)) ||
 			!e820_all_mapped(start, start+size, E820_RAM) ||
 			memblock_is_region_reserved(start, size)) {
drivers/ata/libata-core.c +27 -0
index 2c2780a19609..f3c361b5c5e5 100644
@@ -2222,6 +2222,16 @@ int ata_dev_configure(struct ata_device *dev)
 	if (rc)
 		return rc;
 
+	/* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */
+	if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) &&
+	    (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2)
+		dev->horkage |= ATA_HORKAGE_NOLPM;
+
+	if (dev->horkage & ATA_HORKAGE_NOLPM) {
+		ata_dev_warn(dev, "LPM support broken, forcing max_power\n");
+		dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -4216,6 +4226,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 	{ "Crucial_CT???M500SSD1",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 
+	/*
+	 * Some WD SATA-I drives spin up and down erratically when the link
+	 * is put into the slumber mode.  We don't have full list of the
+	 * affected devices.  Disable LPM if the device matches one of the
+	 * known prefixes and is SATA-1.  As a side effect LPM partial is
+	 * lost too.
+	 *
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=57211
+	 */
+	{ "WDC WD800JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD1200JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD1600JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD2000JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD2500JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD3000JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+	{ "WDC WD3200JD-*",		NULL,	ATA_HORKAGE_WD_BROKEN_LPM },
+
 	/* End Marker */
 	{ }
 };
drivers/ata/libata-scsi.c +15 -3
index 377eb889f555..ef8567de6a75 100644
@@ -111,12 +111,14 @@ static const char *ata_lpm_policy_names[] = {
 	[ATA_LPM_MIN_POWER]	= "min_power",
 };
 
-static ssize_t ata_scsi_lpm_store(struct device *dev,
+static ssize_t ata_scsi_lpm_store(struct device *device,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct Scsi_Host *shost = class_to_shost(dev);
+	struct Scsi_Host *shost = class_to_shost(device);
 	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ata_link *link;
+	struct ata_device *dev;
 	enum ata_lpm_policy policy;
 	unsigned long flags;
 
@@ -132,10 +134,20 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
 		return -EINVAL;
 
 	spin_lock_irqsave(ap->lock, flags);
+
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, &ap->link, ENABLED) {
+			if (dev->horkage & ATA_HORKAGE_NOLPM) {
+				count = -EOPNOTSUPP;
+				goto out_unlock;
+			}
+		}
+	}
+
 	ap->target_lpm_policy = policy;
 	ata_port_schedule_eh(ap);
+out_unlock:
 	spin_unlock_irqrestore(ap->lock, flags);
-
 	return count;
 }
 
drivers/ata/sata_mv.c +25 -0
index 56be31819897..dc9d4b1ea4ec 100644
@@ -304,6 +304,7 @@ enum {
 	MV5_LTMODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
 	SATA_IFCFG		= 0x050,
+	LP_PHY_CTL		= 0x058,
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
@@ -431,6 +432,7 @@ enum {
 	MV_HP_CUT_THROUGH	= (1 << 10),	/* can use EDMA cut-through */
 	MV_HP_FLAG_SOC		= (1 << 11),	/* SystemOnChip, no PCI */
 	MV_HP_QUIRK_LED_BLINK_EN = (1 << 12),	/* is led blinking enabled? */
+	MV_HP_FIX_LP_PHY_CTL	= (1 << 13),	/* fix speed in LP_PHY_CTL ? */
 
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),	/* is EDMA engine enabled? */
@@ -1358,6 +1360,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 
 	if (ofs != 0xffffffffU) {
 		void __iomem *addr = mv_ap_base(link->ap) + ofs;
+		struct mv_host_priv *hpriv = link->ap->host->private_data;
 		if (sc_reg_in == SCR_CONTROL) {
 			/*
 			 * Workaround for 88SX60x1 FEr SATA#26:
@@ -1374,6 +1377,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 			 */
 			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
 				val |= 0xf000;
+
+			if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) {
+				void __iomem *lp_phy_addr =
+					mv_ap_base(link->ap) + LP_PHY_CTL;
+				/*
+				 * Set PHY speed according to SControl speed.
+				 */
+				if ((val & 0xf0) == 0x10)
+					writelfl(0x7, lp_phy_addr);
+				else
+					writelfl(0x227, lp_phy_addr);
+			}
 		}
 		writelfl(val, addr);
 		return 0;
@@ -4110,6 +4125,15 @@ static int mv_platform_probe(struct platform_device *pdev)
 	if (rc)
 		goto err;
 
+	/*
+	 * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be
+	 * updated in the LP_PHY_CTL register.
+	 */
+	if (pdev->dev.of_node &&
+		of_device_is_compatible(pdev->dev.of_node,
+					"marvell,armada-370-sata"))
+		hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL;
+
 	/* initialize adapter */
 	rc = mv_init_host(host);
 	if (rc)
@@ -4209,6 +4233,7 @@ static int mv_platform_resume(struct platform_device *pdev)
 
 #ifdef CONFIG_OF
 static struct of_device_id mv_sata_dt_ids[] = {
+	{ .compatible = "marvell,armada-370-sata", },
 	{ .compatible = "marvell,orion-sata", },
 	{},
 };
drivers/char/tpm/tpm_i2c_stm_st33.c +6 -1
index 5bb8e2ddd3b3..156bd3c72770 100644
@@ -410,6 +410,8 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
 			     &chip->vendor.read_queue)
 	       == 0) {
 		burstcnt = get_burstcount(chip);
+		if (burstcnt < 0)
+			return burstcnt;
 		len = min_t(int, burstcnt, count - size);
 		I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len);
 		size += len;
@@ -451,7 +453,8 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
 static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
 			    size_t len)
 {
-	u32 status, burstcnt = 0, i, size;
+	u32 status, i, size;
+	int burstcnt = 0;
 	int ret;
 	u8 data;
 	struct i2c_client *client;
@@ -482,6 +485,8 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
 
 	for (i = 0; i < len - 1;) {
 		burstcnt = get_burstcount(chip);
+		if (burstcnt < 0)
+			return burstcnt;
 		size = min_t(int, len - i - 1, burstcnt);
 		ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
 		if (ret < 0)
drivers/char/tpm/tpm_ppi.c +4 -4
index 57a818b2b5f2..811ad1e4d802 100644
@@ -172,7 +172,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,
 	 * is updated with function index from SUBREQ to SUBREQ2 since PPI
 	 * version 1.1
 	 */
-	if (strcmp(version, "1.1") == -1)
+	if (strcmp(version, "1.1") < 0)
 		params[2].integer.value = TPM_PPI_FN_SUBREQ;
 	else
 		params[2].integer.value = TPM_PPI_FN_SUBREQ2;
@@ -182,7 +182,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,
 	 * string/package type. For PPI version 1.0 and 1.1, use buffer type
 	 * for compatibility, and use package type since 1.2 according to spec.
 	 */
-	if (strcmp(version, "1.2") == -1) {
+	if (strcmp(version, "1.2") < 0) {
 		params[3].type = ACPI_TYPE_BUFFER;
 		params[3].buffer.length = sizeof(req);
 		sscanf(buf, "%d", &req);
@@ -248,7 +248,7 @@ static ssize_t tpm_show_ppi_transition_action(struct device *dev,
 	 * (e.g. Capella with PPI 1.0) need integer/string/buffer type, so for
 	 * compatibility, define params[3].type as buffer, if PPI version < 1.2
 	 */
-	if (strcmp(version, "1.2") == -1) {
+	if (strcmp(version, "1.2") < 0) {
 		params[3].type = ACPI_TYPE_BUFFER;
 		params[3].buffer.length =  0;
 		params[3].buffer.pointer = NULL;
@@ -390,7 +390,7 @@ static ssize_t show_ppi_operations(char *buf, u32 start, u32 end)
 	kfree(output.pointer);
 	output.length = ACPI_ALLOCATE_BUFFER;
 	output.pointer = NULL;
-	if (strcmp(version, "1.2") == -1)
+	if (strcmp(version, "1.2") < 0)
 		return -EPERM;
 
 	params[2].integer.value = TPM_PPI_FN_GETOPR;
drivers/edac/e752x_edac.c +3 -1
index 644fec54681f..f1e9d7bd131f 100644
@@ -1182,9 +1182,11 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
 	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
 				pvt->dev_info->err_dev, pvt->bridge_ck);
 
-	if (pvt->bridge_ck == NULL)
+	if (pvt->bridge_ck == NULL) {
 		pvt->bridge_ck = pci_scan_single_device(pdev->bus,
 							PCI_DEVFN(0, 1));
+		pci_dev_get(pvt->bridge_ck);
+	}
 
 	if (pvt->bridge_ck == NULL) {
 		e752x_printk(KERN_ERR, "error reporting device not found:"
drivers/gpu/drm/nouveau/core/subdev/bios/init.c +4 -4
index 3dc7a997b795..a36f9c1d265c 100644
@@ -365,13 +365,13 @@ static u16
 init_script(struct nouveau_bios *bios, int index)
 {
 	struct nvbios_init init = { .bios = bios };
-	u16 data;
+	u16 bmp_ver = bmp_version(bios), data;
 
-	if (bmp_version(bios) && bmp_version(bios) < 0x0510) {
-		if (index > 1)
+	if (bmp_ver && bmp_ver < 0x0510) {
+		if (index > 1 || bmp_ver < 0x0100)
 			return 0x0000;
 
-		data = bios->bmp_offset + (bios->version.major < 2 ? 14 : 18);
+		data = bios->bmp_offset + (bmp_ver < 0x0200 ? 14 : 18);
 		return nv_ro16(bios, data + (index * 2));
 	}
 
drivers/hwmon/k10temp.c +1 -0
index d65f3fd895dd..758774f4454c 100644
@@ -210,6 +210,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{}
 };
drivers/i2c/busses/Kconfig +1 -0
index cdcbd8368ed3..ff758eded96f 100644
@@ -151,6 +151,7 @@ config I2C_PIIX4
 	    ATI SB700/SP5100
 	    ATI SB800
 	    AMD Hudson-2
+	    AMD ML
 	    AMD CZ
 	    Serverworks OSB4
 	    Serverworks CSB5
drivers/i2c/busses/i2c-mv64xxx.c +5 -0
index d3e9cc3153a9..6f02eb883e5e 100644
@@ -692,6 +692,7 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
 	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{}
 };
 MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
@@ -783,6 +784,10 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		drv_data->errata_delay = true;
 	}
 
+	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
+		drv_data->offload_enabled = false;
+		drv_data->errata_delay = true;
+	}
 out:
 	return rc;
 #endif
drivers/i2c/busses/i2c-piix4.c +23 -5
index a028617b8f13..f71b4d381c00 100644
@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
-	AMD Hudson-2, CZ
+	AMD Hudson-2, ML, CZ
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one or more
@@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 {
 	unsigned short piix4_smba;
 	unsigned short smba_idx = 0xcd6;
-	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
+	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+	u8 i2ccfg, i2ccfg_offset = 0x10;
 
 	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
@@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	}
 
 	/* Determine the address of the SMBus areas */
-	smb_en = (aux) ? 0x28 : 0x2c;
+	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     PIIX4_dev->revision >= 0x41) ||
+	    (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+	     PIIX4_dev->device == 0x790b &&
+	     PIIX4_dev->revision >= 0x49))
+		smb_en = 0x00;
+	else
+		smb_en = (aux) ? 0x28 : 0x2c;
 
 	if (!request_region(smba_idx, 2, "smba_idx")) {
 		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
@@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	smba_en_hi = inb_p(smba_idx + 1);
 	release_region(smba_idx, 2);
 
-	if ((smba_en_lo & 1) == 0) {
+	if (!smb_en) {
+		smb_en_status = smba_en_lo & 0x10;
+		piix4_smba = smba_en_hi << 8;
+		if (aux)
+			piix4_smba |= 0x20;
+	} else {
+		smb_en_status = smba_en_lo & 0x01;
+		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!smb_en_status) {
 		dev_err(&PIIX4_dev->dev,
 			"Host SMBus controller not enabled!\n");
 		return -ENODEV;
 	}
 
-	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 		return -ENODEV;
 
drivers/md/bcache/bset.c +22 -4
index 22d1ae72c282..26fdcac56ad1 100644
@@ -935,7 +935,7 @@ static void sort_key_next(struct btree_iter *iter,
 		*i = iter->data[--iter->used];
 }
 
-static void btree_sort_fixup(struct btree_iter *iter)
+static struct bkey *btree_sort_fixup(struct btree_iter *iter, struct bkey *tmp)
 {
 	while (iter->used > 1) {
 		struct btree_iter_set *top = iter->data, *i = top + 1;
@@ -963,9 +963,22 @@ static void btree_sort_fixup(struct btree_iter *iter)
 		} else {
 			/* can't happen because of comparison func */
 			BUG_ON(!bkey_cmp(&START_KEY(top->k), &START_KEY(i->k)));
-			bch_cut_back(&START_KEY(i->k), top->k);
+
+			if (bkey_cmp(i->k, top->k) < 0) {
+				bkey_copy(tmp, top->k);
+
+				bch_cut_back(&START_KEY(i->k), tmp);
+				bch_cut_front(i->k, top->k);
+				heap_sift(iter, 0, btree_iter_cmp);
+
+				return tmp;
+			} else {
+				bch_cut_back(&START_KEY(i->k), top->k);
+			}
 		}
 	}
+
+	return NULL;
 }
 
 static void btree_mergesort(struct btree *b, struct bset *out,
@@ -973,15 +986,20 @@ static void btree_mergesort(struct btree *b, struct bset *out,
 			    bool fixup, bool remove_stale)
 {
 	struct bkey *k, *last = NULL;
+	BKEY_PADDED(k) tmp;
 	bool (*bad)(struct btree *, const struct bkey *) = remove_stale
 		? bch_ptr_bad
 		: bch_ptr_invalid;
 
 	while (!btree_iter_end(iter)) {
 		if (fixup && !b->level)
-			btree_sort_fixup(iter);
+			k = btree_sort_fixup(iter, &tmp.k);
+		else
+			k = NULL;
+
+		if (!k)
+			k = bch_btree_iter_next(iter);
 
-		k = bch_btree_iter_next(iter);
 		if (bad(b, k))
 			continue;
 
drivers/md/raid5.c +1 -0
index 93174c6ab37c..10e9e46108fd 100644
@@ -2004,6 +2004,7 @@ static void raid5_end_write_request(struct bio *bi, int error)
 			set_bit(R5_MadeGoodRepl, &sh->dev[i].flags);
 	} else {
 		if (!uptodate) {
+			set_bit(STRIPE_DEGRADED, &sh->state);
 			set_bit(WriteErrorSeen, &rdev->flags);
 			set_bit(R5_WriteError, &sh->dev[i].flags);
 			if (!test_and_set_bit(WantReplacement, &rdev->flags))
drivers/mfd/max77686.c +1 -1
index 522be67b2e68..108453b75ccc 100644
@@ -103,7 +103,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
 	max77686->irq_gpio = pdata->irq_gpio;
 	max77686->irq = i2c->irq;
 
-	max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
+	max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
 	if (IS_ERR(max77686->regmap)) {
 		ret = PTR_ERR(max77686->regmap);
 		dev_err(max77686->dev, "Failed to allocate register map: %d\n",
drivers/misc/mei/hbm.c +19 -0
index 0a0448326e9d..98f95614b5b1 100644
@@ -128,6 +128,17 @@ static bool is_treat_specially_client(struct mei_cl *cl,
 	return false;
 }
 
+/**
+ * mei_hbm_idle - set hbm to idle state
+ *
+ * @dev: the device structure
+ */
+void mei_hbm_idle(struct mei_device *dev)
+{
+	dev->init_clients_timer = 0;
+	dev->hbm_state = MEI_HBM_IDLE;
+}
+
 int mei_hbm_start_wait(struct mei_device *dev)
 {
 	int ret;
@@ -577,6 +588,14 @@ void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr)
 	mei_read_slots(dev, dev->rd_msg_buf, hdr->length);
 	mei_msg = (struct mei_bus_message *)dev->rd_msg_buf;
 
+	/* ignore spurious message and prevent reset nesting
+	 * hbm is put to idle during system reset
+	 */
+	if (dev->hbm_state == MEI_HBM_IDLE) {
+		dev_dbg(&dev->pdev->dev, "hbm: state is idle ignore spurious messages\n");
+		return 0;
+	}
+
 	switch (mei_msg->hbm_cmd) {
 	case HOST_START_RES_CMD:
 		version_res = (struct hbm_host_version_response *)mei_msg;
drivers/misc/mei/hbm.h +1 -0
index 4ae2e56e404f..210757701207 100644
@@ -49,6 +49,7 @@ static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length)
 	hdr->reserved = 0;
 }
 
+void mei_hbm_idle(struct mei_device *dev);
 int mei_hbm_start_req(struct mei_device *dev);
 int mei_hbm_start_wait(struct mei_device *dev);
 int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl);
drivers/misc/mei/init.c +8 -4
index 6197018e2f16..3fd43b0e69d1 100644
@@ -139,14 +139,19 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 			dev->dev_state != MEI_DEV_POWER_DOWN &&
 			dev->dev_state != MEI_DEV_POWER_UP);
 
+	/* we're already in reset, cancel the init timer
+	 * if the reset was called due the hbm protocol error
+	 * we need to call it before hw start
+	 * so the hbm watchdog won't kick in
+	 */
+	mei_hbm_idle(dev);
+
 	ret = mei_hw_reset(dev, interrupts_enabled);
 	if (ret) {
 		dev_err(&dev->pdev->dev, "hw reset failed disabling the device\n");
 		interrupts_enabled = false;
-		dev->dev_state = MEI_DEV_DISABLED;
 	}
 
-	dev->hbm_state = MEI_HBM_IDLE;
 
 	if (dev->dev_state != MEI_DEV_INITIALIZING &&
 	    dev->dev_state != MEI_DEV_POWER_UP) {
@@ -175,8 +180,6 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 		memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg));
 	}
 
-	/* we're already in reset, cancel the init timer */
-	dev->init_clients_timer = 0;
 
 	dev->me_clients_num = 0;
 	dev->rd_msg_hdr = 0;
@@ -188,6 +191,7 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 
 	if (!interrupts_enabled) {
 		dev_dbg(&dev->pdev->dev, "intr not enabled end of reset\n");
+		dev->dev_state = MEI_DEV_DISABLED;
 		return;
 	}
 
drivers/misc/mei/interrupt.c +15 -10
index 4b59cb742dee..1b922e971d3e 100644
@@ -536,7 +536,6 @@ EXPORT_SYMBOL_GPL(mei_irq_write_handler);
  *
  * @work: pointer to the work_struct structure
  *
- * NOTE: This function is called by timer interrupt work
  */
 void mei_timer(struct work_struct *work)
 {
@@ -551,18 +550,24 @@ void mei_timer(struct work_struct *work)
 
 
 	mutex_lock(&dev->device_lock);
-	if (dev->dev_state != MEI_DEV_ENABLED) {
-		if (dev->dev_state == MEI_DEV_INIT_CLIENTS) {
-			if (dev->init_clients_timer) {
-				if (--dev->init_clients_timer == 0) {
-					dev_err(&dev->pdev->dev, "reset: init clients timeout hbm_state = %d.\n",
-						dev->hbm_state);
-					mei_reset(dev, 1);
-				}
+
+	/* Catch interrupt stalls during HBM init handshake */
+	if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
+	    dev->hbm_state != MEI_HBM_IDLE) {
+
+		if (dev->init_clients_timer) {
+			if (--dev->init_clients_timer == 0) {
+				dev_err(&dev->pdev->dev, "timer: init clients timeout hbm_state = %d.\n",
+					dev->hbm_state);
+				mei_reset(dev, 1);
+				goto out;
 			}
 		}
-		goto out;
 	}
+
+	if (dev->dev_state != MEI_DEV_ENABLED)
+		goto out;
+
 	/*** connect/disconnect timeouts ***/
 	list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
 		if (cl_pos->timer_count) {
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +9 -4
index 4ab4c89c60cd..0399458e6d44 100644
@@ -160,6 +160,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 	struct sk_buff *skb = tx_buf->skb;
 	u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
 	int nbd;
+	u16 split_bd_len = 0;
 
 	/* prefetch skb end pointer to speedup dev_kfree_skb() */
 	prefetch(&skb->end);
@@ -167,10 +168,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 	DP(NETIF_MSG_TX_DONE, "fp[%d]: pkt_idx %d  buff @(%p)->skb %p\n",
 	   txdata->txq_index, idx, tx_buf, skb);
 
-	/* unmap first bd */
 	tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
-	dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
-			 BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
 
 	nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
 #ifdef BNX2X_STOP_ON_ERROR
@@ -188,12 +186,19 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
 	--nbd;
 	bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 
-	/* ...and the TSO split header bd since they have no mapping */
+	/* TSO headers+data bds share a common mapping. See bnx2x_tx_split() */
 	if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
+		tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
+		split_bd_len = BD_UNMAP_LEN(tx_data_bd);
 		--nbd;
 		bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
 	}
 
+	/* unmap first bd */
+	dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
+			 BD_UNMAP_LEN(tx_start_bd) + split_bd_len,
+			 DMA_TO_DEVICE);
+
 	/* now free frags */
 	while (nbd > 0) {
 
drivers/net/ethernet/intel/e1000e/phy.c +7 -3
index da2be59505c0..20e71f4ca426 100644
@@ -1757,19 +1757,23 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 		 * it across the board.
 		 */
 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
-		if (ret_val)
+		if (ret_val) {
 			/* If the first read fails, another entity may have
 			 * ownership of the resources, wait and try again to
 			 * see if they have relinquished the resources yet.
 			 */
-			udelay(usec_interval);
+			if (usec_interval >= 1000)
+				msleep(usec_interval / 1000);
+			else
+				udelay(usec_interval);
+		}
 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
 		if (ret_val)
 			break;
 		if (phy_status & BMSR_LSTATUS)
 			break;
 		if (usec_interval >= 1000)
-			mdelay(usec_interval / 1000);
+			msleep(usec_interval / 1000);
 		else
 			udelay(usec_interval);
 	}
drivers/net/ethernet/via/via-rhine.c +1 -0
index bdf697b184ae..f3ae9d94fe71 100644
@@ -1615,6 +1615,7 @@ static void rhine_reset_task(struct work_struct *work)
 		goto out_unlock;
 
 	napi_disable(&rp->napi);
+	netif_tx_disable(dev);
 	spin_lock_bh(&rp->lock);
 
 	/* clear all descriptors */
drivers/net/usb/usbnet.c +1 -1
index 8494bb53ebdc..aba04f561760 100644
@@ -1245,7 +1245,7 @@ static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
 		return -ENOMEM;
 
 	urb->num_sgs = num_sgs;
-	sg_init_table(urb->sg, urb->num_sgs);
+	sg_init_table(urb->sg, urb->num_sgs + 1);
 
 	sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
 	total_len += skb_headlen(skb);
drivers/net/vxlan.c +9 -11
index 146236891889..32c45c3d820d 100644
@@ -1051,6 +1051,15 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 	if (!vs)
 		goto drop;
 
+	/* If the NIC driver gave us an encapsulated packet
+	 * with the encapsulation mark, the device checksummed it
+	 * for us. Otherwise force the upper layers to verify it.
+	 */
+	if (skb->ip_summed != CHECKSUM_UNNECESSARY || !skb->encapsulation)
+		skb->ip_summed = CHECKSUM_NONE;
+
+	skb->encapsulation = 0;
+
 	vs->rcv(vs, skb, vxh->vx_vni);
 	return 0;
 
@@ -1109,17 +1118,6 @@ static void vxlan_rcv(struct vxlan_sock *vs,
 
 	skb_reset_network_header(skb);
 
-	/* If the NIC driver gave us an encapsulated packet with
-	 * CHECKSUM_UNNECESSARY and Rx checksum feature is enabled,
-	 * leave the CHECKSUM_UNNECESSARY, the device checksummed it
-	 * for us. Otherwise force the upper layers to verify it.
-	 */
-	if (skb->ip_summed != CHECKSUM_UNNECESSARY || !skb->encapsulation ||
-	    !(vxlan->dev->features & NETIF_F_RXCSUM))
-		skb->ip_summed = CHECKSUM_NONE;
-
-	skb->encapsulation = 0;
-
 	if (oip6)
 		err = IP6_ECN_decapsulate(oip6, skb);
 	if (oip)
drivers/net/wireless/ath/ath9k/hw.c +0 -7
index ecc6ec4a1edb..4e0a9429e192 100644
@@ -2608,13 +2608,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	    ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
 			pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
 
-	/*
-	 * Fast channel change across bands is available
-	 * only for AR9462 and AR9565.
-	 */
-	if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
-		pCap->hw_caps |= ATH9K_HW_CAP_FCC_BAND_SWITCH;
-
 	return 0;
 }
 
drivers/net/wireless/ath/ath9k/recv.c +14 -11
index ab9e3a8410bc..a1ab4ff46818 100644
@@ -848,20 +848,15 @@ static int ath9k_process_rate(struct ath_common *common,
 	enum ieee80211_band band;
 	unsigned int i = 0;
 	struct ath_softc __maybe_unused *sc = common->priv;
+	struct ath_hw *ah = sc->sc_ah;
 
-	band = hw->conf.chandef.chan->band;
+	band = ah->curchan->chan->band;
 	sband = hw->wiphy->bands[band];
 
-	switch (hw->conf.chandef.width) {
-	case NL80211_CHAN_WIDTH_5:
+	if (IS_CHAN_QUARTER_RATE(ah->curchan))
 		rxs->flag |= RX_FLAG_5MHZ;
-		break;
-	case NL80211_CHAN_WIDTH_10:
+	else if (IS_CHAN_HALF_RATE(ah->curchan))
 		rxs->flag |= RX_FLAG_10MHZ;
-		break;
-	default:
-		break;
-	}
 
 	if (rx_stats->rs_rate & 0x80) {
 		/* HT rate */
@@ -1175,6 +1170,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		ath_start_rx_poll(sc, 3);
 	}
 
+	/*
+	 * This shouldn't happen, but have a safety check anyway.
+	 */
+	if (WARN_ON(!ah->curchan)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
 	if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
 		ret =-EINVAL;
 		goto exit;
@@ -1182,8 +1185,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 
 	ath9k_process_rssi(common, hw, rx_stats, rx_status);
 
-	rx_status->band = hw->conf.chandef.chan->band;
-	rx_status->freq = hw->conf.chandef.chan->center_freq;
+	rx_status->band = ah->curchan->chan->band;
+	rx_status->freq = ah->curchan->chan->center_freq;
 	rx_status->antenna = rx_stats->rs_antenna;
 	rx_status->flag |= RX_FLAG_MACTIME_END;
 
drivers/net/wireless/b43/b43.h +2 -2
index 7f3d461f7e8d..54376fddfaf9 100644
@@ -731,8 +731,6 @@ enum b43_firmware_file_type {
 struct b43_request_fw_context {
 	/* The device we are requesting the fw for. */
 	struct b43_wldev *dev;
-	/* a completion event structure needed if this call is asynchronous */
-	struct completion fw_load_complete;
 	/* a pointer to the firmware object */
 	const struct firmware *blob;
 	/* The type of firmware to request. */
@@ -809,6 +807,8 @@ enum {
 struct b43_wldev {
 	struct b43_bus_dev *dev;
 	struct b43_wl *wl;
+	/* a completion event structure needed if this call is asynchronous */
+	struct completion fw_load_complete;
 
 	/* The device initialization status.
 	 * Use b43_status() to query. */
drivers/net/wireless/b43/main.c +16 -11
index ccd24f0acb8d..c75237eb55a1 100644
@@ -2070,6 +2070,7 @@ void b43_do_release_fw(struct b43_firmware_file *fw)
 
 static void b43_release_firmware(struct b43_wldev *dev)
 {
+	complete(&dev->fw_load_complete);
 	b43_do_release_fw(&dev->fw.ucode);
 	b43_do_release_fw(&dev->fw.pcm);
 	b43_do_release_fw(&dev->fw.initvals);
@@ -2095,7 +2096,7 @@ static void b43_fw_cb(const struct firmware *firmware, void *context)
 	struct b43_request_fw_context *ctx = context;
 
 	ctx->blob = firmware;
-	complete(&ctx->fw_load_complete);
+	complete(&ctx->dev->fw_load_complete);
 }
 
 int b43_do_request_fw(struct b43_request_fw_context *ctx,
@@ -2142,7 +2143,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
 	}
 	if (async) {
 		/* do this part asynchronously */
-		init_completion(&ctx->fw_load_complete);
+		init_completion(&ctx->dev->fw_load_complete);
 		err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname,
 					      ctx->dev->dev->dev, GFP_KERNEL,
 					      ctx, b43_fw_cb);
@@ -2150,12 +2151,11 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
 			pr_err("Unable to load firmware\n");
 			return err;
 		}
-		/* stall here until fw ready */
-		wait_for_completion(&ctx->fw_load_complete);
+		wait_for_completion(&ctx->dev->fw_load_complete);
 		if (ctx->blob)
 			goto fw_ready;
 	/* On some ARM systems, the async request will fail, but the next sync
-	 * request works. For this reason, we dall through here
+	 * request works. For this reason, we fall through here
 	 */
 	}
 	err = request_firmware(&ctx->blob, ctx->fwname,
@@ -2424,6 +2424,7 @@ error:
 
 static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl);
 static void b43_one_core_detach(struct b43_bus_dev *dev);
+static int b43_rng_init(struct b43_wl *wl);
 
 static void b43_request_firmware(struct work_struct *work)
 {
@@ -2475,6 +2476,10 @@ start_ieee80211:
 		goto err_one_core_detach;
 	wl->hw_registred = true;
 	b43_leds_register(wl->current_dev);
+
+	/* Register HW RNG driver */
+	b43_rng_init(wl);
+
 	goto out;
 
 err_one_core_detach:
@@ -4636,9 +4641,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
 	if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
 		return;
 
-	/* Unregister HW RNG driver */
-	b43_rng_exit(dev->wl);
-
 	b43_set_status(dev, B43_STAT_UNINIT);
 
 	/* Stop the microcode PSM. */
@@ -4795,9 +4797,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 
 	b43_set_status(dev, B43_STAT_INITIALIZED);
 
-	/* Register HW RNG driver */
-	b43_rng_init(dev->wl);
-
 out:
 	return err;
 
@@ -5464,6 +5463,9 @@ static void b43_bcma_remove(struct bcma_device *core)
 
 	b43_one_core_detach(wldev->dev);
 
+	/* Unregister HW RNG driver */
+	b43_rng_exit(wl);
+
 	b43_leds_unregister(wl);
 
 	ieee80211_free_hw(wl->hw);
@@ -5541,6 +5543,9 @@ static void b43_ssb_remove(struct ssb_device *sdev)
 
 	b43_one_core_detach(dev);
 
+	/* Unregister HW RNG driver */
+	b43_rng_exit(wl);
+
 	if (list_empty(&wl->devlist)) {
 		b43_leds_unregister(wl);
 		/* Last core on the chip unregistered.
drivers/net/wireless/b43/xmit.c +2 -2
index 8cb206a89083..e85d34b76039 100644
@@ -821,10 +821,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		 * channel number in b43. */
 		if (chanstat & B43_RX_CHAN_5GHZ) {
 			status.band = IEEE80211_BAND_5GHZ;
-			status.freq = b43_freq_to_channel_5ghz(chanid);
+			status.freq = b43_channel_to_freq_5ghz(chanid);
 		} else {
 			status.band = IEEE80211_BAND_2GHZ;
-			status.freq = b43_freq_to_channel_2ghz(chanid);
+			status.freq = b43_channel_to_freq_2ghz(chanid);
 		}
 		break;
 	default:
drivers/net/wireless/b43legacy/main.c +1 -0
index 572668821862..349c77605231 100644
@@ -3919,6 +3919,7 @@ static void b43legacy_remove(struct ssb_device *dev)
 	 * as the ieee80211 unreg will destroy the workqueue. */
 	cancel_work_sync(&wldev->restart_work);
 	cancel_work_sync(&wl->firmware_load);
+	complete(&wldev->fw_load_complete);
 
 	B43legacy_WARN_ON(!wl);
 	if (!wldev->fw.ucode)
drivers/net/wireless/iwlwifi/iwl-prph.h +4 -0
index ff8cc75c189d..4e6dfbafc2a1 100644
@@ -272,4 +272,8 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
 
 /*********************** END TX SCHEDULER *************************************/
 
+/* Oscillator clock */
+#define OSC_CLK				(0xa04068)
+#define OSC_CLK_FORCE_CONTROL		(0x8)
+
 #endif				/* __iwl_prph_h__ */
drivers/net/wireless/iwlwifi/mvm/ops.c +1 -0
index 2fcc8ef88a68..1fd08baa0d32 100644
@@ -446,6 +446,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
  out_unregister:
 	ieee80211_unregister_hw(mvm->hw);
+	iwl_mvm_leds_exit(mvm);
  out_free:
 	iwl_phy_db_free(mvm->phy_db);
 	kfree(mvm->scan_cmd);
drivers/net/wireless/iwlwifi/pcie/trans.c +22 -0
index 6bc31003a32c..7bdaf06b8f5a 100644
@@ -206,6 +206,28 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
 		goto out;
 	}
 
+	if (trans->cfg->host_interrupt_operation_mode) {
+		/*
+		 * This is a bit of an abuse - This is needed for 7260 / 3160
+		 * only check host_interrupt_operation_mode even if this is
+		 * not related to host_interrupt_operation_mode.
+		 *
+		 * Enable the oscillator to count wake up time for L1 exit. This
+		 * consumes slightly more power (100uA) - but allows to be sure
+		 * that we wake up from L1 on time.
+		 *
+		 * This looks weird: read twice the same register, discard the
+		 * value, set a bit, and yet again, read that same register
+		 * just to discard the value. But that's the way the hardware
+		 * seems to like it.
+		 */
+		iwl_read_prph(trans, OSC_CLK);
+		iwl_read_prph(trans, OSC_CLK);
+		iwl_set_bits_prph(trans, OSC_CLK, OSC_CLK_FORCE_CONTROL);
+		iwl_read_prph(trans, OSC_CLK);
+		iwl_read_prph(trans, OSC_CLK);
+	}
+
 	/*
 	 * Enable DMA clock and wait for it to stabilize.
 	 *
drivers/net/wireless/mwifiex/fw.h +1 -1
index f80f30b6160e..14f63c9f6220 100644
@@ -226,7 +226,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 /* HW_SPEC fw_cap_info */
 
-#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14)))
+#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(12)|BIT(13)))
 
 #define GET_VHTCAP_CHWDSET(vht_cap_info)    ((vht_cap_info >> 2) & 0x3)
 #define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
drivers/net/wireless/mwifiex/scan.c +2 -2
index 8cf7d50a7603..ba48e64673d9 100644
@@ -1681,7 +1681,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 		const u8 *ie_buf;
 		size_t ie_len;
 		u16 channel = 0;
-		u64 fw_tsf = 0;
+		__le64 fw_tsf = 0;
 		u16 beacon_size = 0;
 		u32 curr_bcn_bytes;
 		u32 freq;
@@ -1815,7 +1815,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
 					      ie_buf, ie_len, rssi, GFP_KERNEL);
 				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
 				bss_priv->band = band;
-				bss_priv->fw_tsf = fw_tsf;
+				bss_priv->fw_tsf = le64_to_cpu(fw_tsf);
 				if (priv->media_connected &&
 				    !memcmp(bssid,
 					    priv->curr_bss_params.bss_descriptor
drivers/net/wireless/rtlwifi/base.c +2 -1
index 9fa90a252b96..e99d8b1aa3bd 100644
@@ -1437,7 +1437,8 @@ void rtl_watchdog_wq_callback(void *data)
 			/* if we can't recv beacon for 6s, we should
 			 * reconnect this AP
 			 */
-			if (rtlpriv->link_info.roam_times >= 3) {
+			if ((rtlpriv->link_info.roam_times >= 3) &&
+			    !is_zero_ether_addr(rtlpriv->mac80211.bssid)) {
 				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 					 "AP off, try to reconnect now\n");
 				rtlpriv->link_info.roam_times = 0;
drivers/net/wireless/rtlwifi/core.c +11 -0
index 733b7ce7f0e2..3550e8ae34eb 100644
@@ -46,10 +46,20 @@ void rtl_fw_cb(const struct firmware *firmware, void *context)
 			 "Firmware callback routine entered!\n");
 	complete(&rtlpriv->firmware_loading_complete);
 	if (!firmware) {
+		if (rtlpriv->cfg->alt_fw_name) {
+			err = request_firmware(&firmware,
+					       rtlpriv->cfg->alt_fw_name,
+					       rtlpriv->io.dev);
+			pr_info("Loading alternative firmware %s\n",
+				rtlpriv->cfg->alt_fw_name);
+			if (!err)
+				goto found_alt;
+		}
 		pr_err("Firmware %s not available\n", rtlpriv->cfg->fw_name);
 		rtlpriv->max_fw_size = 0;
 		return;
 	}
+found_alt:
 	if (firmware->size > rtlpriv->max_fw_size) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 			 "Firmware is too big!\n");
@@ -184,6 +194,7 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw,
 					rtlpriv->cfg->maps
 					[RTL_IBSS_INT_MASKS]);
 		}
+		mac->link_state = MAC80211_LINKED;
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c +1 -1
index 21a5cf060677..a6184b6e1d57 100644
@@ -1078,7 +1078,7 @@ static void rtl88e_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw
 				rtldm->swing_flag_ofdm = true;
 			}
 
-			if (rtldm->swing_idx_cck != rtldm->swing_idx_cck) {
+			if (rtldm->swing_idx_cck_cur != rtldm->swing_idx_cck) {
 				rtldm->swing_idx_cck_cur = rtldm->swing_idx_cck;
 				rtldm->swing_flag_cck = true;
 			}
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +36 -0
index d2d57a27a7c1..06cb94cf5085 100644
@@ -158,6 +158,42 @@ static const u8 cckswing_table_ch14[CCK_TABLE_SIZE][8] = {
 	{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00}
 };
 
+static u32 power_index_reg[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};
+
+void dm_restorepowerindex(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8	index;
+
+	for (index = 0; index < 6; index++)
+		rtl_write_byte(rtlpriv, power_index_reg[index],
+			       rtlpriv->dm.powerindex_backup[index]);
+}
+EXPORT_SYMBOL_GPL(dm_restorepowerindex);
+
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 index;
+
+	for (index = 0; index < 6; index++)
+		rtl_write_byte(rtlpriv, power_index_reg[index], value);
+}
+EXPORT_SYMBOL_GPL(dm_writepowerindex);
+
+void dm_savepowerindex(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 index;
+	u8 tmp;
+
+	for (index = 0; index < 6; index++) {
+		tmp = rtl_read_byte(rtlpriv, power_index_reg[index]);
+		rtlpriv->dm.powerindex_backup[index] = tmp;
+	}
+}
+EXPORT_SYMBOL_GPL(dm_savepowerindex);
+
 static void rtl92c_dm_diginit(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h +14 -0
index 518e208c0180..4f232a063636 100644
@@ -91,6 +91,17 @@
 #define TX_POWER_NEAR_FIELD_THRESH_LVL2		74
 #define TX_POWER_NEAR_FIELD_THRESH_LVL1		67
 
+#define DYNAMIC_FUNC_DISABLE			0x0
+#define DYNAMIC_FUNC_DIG			BIT(0)
+#define DYNAMIC_FUNC_HP				BIT(1)
+#define DYNAMIC_FUNC_SS				BIT(2) /*Tx Power Tracking*/
+#define DYNAMIC_FUNC_BT				BIT(3)
+#define DYNAMIC_FUNC_ANT_DIV			BIT(4)
+
+#define	RSSI_CCK				0
+#define	RSSI_OFDM				1
+#define	RSSI_DEFAULT				2
+
 struct swat_t {
 	u8 failure_cnt;
 	u8 try_flag;
@@ -167,5 +178,8 @@ void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
 void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
 void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw);
 void rtl92c_dm_bt_coexist(struct ieee80211_hw *hw);
+void dm_savepowerindex(struct ieee80211_hw *hw);
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value);
+void dm_restorepowerindex(struct ieee80211_hw *hw);
 
 #endif
drivers/net/wireless/rtlwifi/rtl8192cu/dm.c +9 -0
index 16a0b9e59acf..c16209a336ea 100644
@@ -101,6 +101,15 @@ void rtl92cu_dm_dynamic_txpower(struct ieee80211_hw *hw)
 			 "PHY_SetTxPowerLevel8192S() Channel = %d\n",
 			 rtlphy->current_channel);
 		rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+		if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+		    TXHIGHPWRLEVEL_NORMAL)
+			dm_restorepowerindex(hw);
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_LEVEL1)
+			dm_writepowerindex(hw, 0x14);
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_LEVEL2)
+			dm_writepowerindex(hw, 0x10);
 	}
 
 	rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
drivers/net/wireless/rtlwifi/rtl8192cu/dm.h +3 -0
index d947e7d350bb..fafa6bac2a3f 100644
@@ -30,3 +30,6 @@
 #include "../rtl8192ce/dm.h"
 
 void rtl92cu_dm_dynamic_txpower(struct ieee80211_hw *hw);
+void dm_savepowerindex(struct ieee80211_hw *hw);
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value);
+void dm_restorepowerindex(struct ieee80211_hw *hw);
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c +16 -13
index 2119313a737b..b878d56d2f4d 100644
@@ -85,17 +85,15 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 	if (mac->act_scanning) {
 		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
 		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
-		if (turbo_scanoff) {
-			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
-				tx_agc[idx1] = ppowerlevel[idx1] |
-				    (ppowerlevel[idx1] << 8) |
-				    (ppowerlevel[idx1] << 16) |
-				    (ppowerlevel[idx1] << 24);
-				if (rtlhal->interface == INTF_USB) {
-					if (tx_agc[idx1] > 0x20 &&
-					    rtlefuse->external_pa)
-						tx_agc[idx1] = 0x20;
-				}
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = ppowerlevel[idx1] |
+			    (ppowerlevel[idx1] << 8) |
+			    (ppowerlevel[idx1] << 16) |
+			    (ppowerlevel[idx1] << 24);
+			if (rtlhal->interface == INTF_USB) {
+				if (tx_agc[idx1] > 0x20 &&
+				    rtlefuse->external_pa)
+					tx_agc[idx1] = 0x20;
 			}
 		}
 	} else {
@@ -107,7 +105,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
 			   TXHIGHPWRLEVEL_LEVEL2) {
 			tx_agc[RF90_PATH_A] = 0x00000000;
 			tx_agc[RF90_PATH_B] = 0x00000000;
-		} else{
+		} else {
 			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
 				tx_agc[idx1] = ppowerlevel[idx1] |
 				    (ppowerlevel[idx1] << 8) |
@@ -373,7 +371,12 @@ static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw,
 			    regoffset == RTXAGC_B_MCS07_MCS04)
 				regoffset = 0xc98;
 			for (i = 0; i < 3; i++) {
-				writeVal = (writeVal > 6) ? (writeVal - 6) : 0;
+				if (i != 2)
+					writeVal = (writeVal > 8) ?
+						   (writeVal - 8) : 0;
+				else
+					writeVal = (writeVal > 6) ?
+						   (writeVal - 6) : 0;
 				rtl_write_byte(rtlpriv, (u32)(regoffset + i),
 					      (u8)writeVal);
 			}
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +14 -3
index 2bd598526217..8188dcb512f0 100644
@@ -49,6 +49,9 @@ MODULE_AUTHOR("Larry Finger	<[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n USB wireless");
 MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
 
 static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
 {
@@ -68,14 +71,21 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
 			 "Can't alloc buffer for fw\n");
 		return 1;
 	}
-
+	if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
+	    !IS_92C_SERIAL(rtlpriv->rtlhal.version)) {
+		rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_A.bin";
+	} else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlpriv->rtlhal.version)) {
+		rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_B.bin";
+	} else {
+		rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_TMSC.bin";
+	}
+	/* provide name of alternative file */
+	rtlpriv->cfg->alt_fw_name = "rtlwifi/rtl8192cufw.bin";
 	pr_info("Loading firmware %s\n", rtlpriv->cfg->fw_name);
 	rtlpriv->max_fw_size = 0x4000;
 	err = request_firmware_nowait(THIS_MODULE, 1,
 				      rtlpriv->cfg->fw_name, rtlpriv->io.dev,
 				      GFP_KERNEL, hw, rtl_fw_cb);
-
-
 	return err;
 }
 
@@ -306,6 +316,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
 	{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+	{RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
 	{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
 	{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
 	/* HP - Lite-On ,8188CUS Slim Combo */
drivers/net/wireless/rtlwifi/stats.c +14 -0
index 8ed31744a054..4f083fc1d360 100644
@@ -176,6 +176,7 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
 	struct rtl_sta_info *drv_priv = NULL;
 	struct ieee80211_sta *sta = NULL;
 	long undec_sm_pwdb;
+	long undec_sm_cck;
 
 	rcu_read_lock();
 	if (rtlpriv->mac80211.opmode != NL80211_IFTYPE_STATION)
@@ -185,12 +186,16 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
 	if (sta) {
 		drv_priv = (struct rtl_sta_info *) sta->drv_priv;
 		undec_sm_pwdb = drv_priv->rssi_stat.undec_sm_pwdb;
+		undec_sm_cck = drv_priv->rssi_stat.undec_sm_cck;
 	} else {
 		undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
+		undec_sm_cck = rtlpriv->dm.undec_sm_cck;
 	}
 
 	if (undec_sm_pwdb < 0)
 		undec_sm_pwdb = pstatus->rx_pwdb_all;
+	if (undec_sm_cck < 0)
+		undec_sm_cck = pstatus->rx_pwdb_all;
 	if (pstatus->rx_pwdb_all > (u32) undec_sm_pwdb) {
 		undec_sm_pwdb = (((undec_sm_pwdb) *
 		      (RX_SMOOTH_FACTOR - 1)) +
@@ -200,6 +205,15 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
 		undec_sm_pwdb = (((undec_sm_pwdb) * (RX_SMOOTH_FACTOR - 1)) +
 		     (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
 	}
+	if (pstatus->rx_pwdb_all > (u32) undec_sm_cck) {
+		undec_sm_cck = (((undec_sm_pwdb) *
+		      (RX_SMOOTH_FACTOR - 1)) +
+		     (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+		undec_sm_cck = undec_sm_cck + 1;
+	} else {
+		undec_sm_pwdb = (((undec_sm_cck) * (RX_SMOOTH_FACTOR - 1)) +
+		     (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+	}
 
 	if (sta) {
 		drv_priv->rssi_stat.undec_sm_pwdb = undec_sm_pwdb;
drivers/net/wireless/rtlwifi/usb.c +3 -1
index e56778cac9bf..97924743ecf6 100644
@@ -484,6 +484,8 @@ static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw,
 			if (unicast)
 				rtlpriv->link_info.num_rx_inperiod++;
 		}
+		/* static bcn for roaming */
+		rtl_beacon_statistic(hw, skb);
 	}
 }
 
@@ -555,7 +557,7 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb)
 	}
 }
 
-#define __RX_SKB_MAX_QUEUED	32
+#define __RX_SKB_MAX_QUEUED	64
 
 static void _rtl_rx_work(unsigned long param)
 {
drivers/net/wireless/rtlwifi/wifi.h +17 -16
index ad9c37a42709..e576a927fde7 100644
@@ -1035,6 +1035,7 @@ struct rtl_ht_agg {
 
 struct rssi_sta {
 	long undec_sm_pwdb;
+	long undec_sm_cck;
 };
 
 struct rtl_tid_data {
@@ -1325,8 +1326,10 @@ struct fast_ant_training {
 struct rtl_dm {
 	/*PHY status for Dynamic Management */
 	long entry_min_undec_sm_pwdb;
+	long undec_sm_cck;
 	long undec_sm_pwdb;	/*out dm */
 	long entry_max_undec_sm_pwdb;
+	s32 ofdm_pkt_cnt;
 	bool dm_initialgain_enable;
 	bool dynamic_txpower_enable;
 	bool current_turbo_edca;
@@ -1341,6 +1344,7 @@ struct rtl_dm {
 	bool inform_fw_driverctrldm;
 	bool current_mrc_switch;
 	u8 txpowercount;
+	u8 powerindex_backup[6];
 
 	u8 thermalvalue_rxgain;
 	u8 thermalvalue_iqk;
@@ -1352,7 +1356,9 @@ struct rtl_dm {
 	bool done_txpower;
 	u8 dynamic_txhighpower_lvl;	/*Tx high power level */
 	u8 dm_flag;		/*Indicate each dynamic mechanism's status. */
+	u8 dm_flag_tmp;
 	u8 dm_type;
+	u8 dm_rssi_sel;
 	u8 txpower_track_control;
 	bool interrupt_migration;
 	bool disable_tx_int;
@@ -1806,6 +1812,7 @@ struct rtl_hal_cfg {
 	bool write_readback;
 	char *name;
 	char *fw_name;
+	char *alt_fw_name;
 	struct rtl_hal_ops *ops;
 	struct rtl_mod_params *mod_params;
 	struct rtl_hal_usbint_cfg *usb_interface_cfg;
@@ -1950,6 +1957,7 @@ struct dig_t {
 	u8 pre_ccastate;
 	u8 cur_ccasate;
 	u8 large_fa_hit;
+	u8 dig_dynamic_min;
 	u8 forbidden_igi;
 	u8 dig_state;
 	u8 dig_highpwrstate;
@@ -2030,22 +2038,15 @@ struct rtl_priv {
 	struct dig_t dm_digtable;
 	struct ps_t dm_pstable;
 
-	/* section shared by individual drivers */
-	union {
-		struct {	/* data buffer pointer for USB reads */
-			__le32 *usb_data;
-			int usb_data_index;
-			bool initialized;
-		};
-		struct {	/* section for 8723ae */
-			bool reg_init;	/* true if regs saved */
-			u32 reg_874;
-			u32 reg_c70;
-			u32 reg_85c;
-			u32 reg_a74;
-			bool bt_operation_on;
-		};
-	};
+	u32 reg_874;
+	u32 reg_c70;
+	u32 reg_85c;
+	u32 reg_a74;
+	bool reg_init;	/* true if regs saved */
+	bool bt_operation_on;
+	__le32 *usb_data;
+	int usb_data_index;
+	bool initialized;
 	bool enter_ps;	/* true when entering PS */
 	u8 rate_mask[5];
 
drivers/net/xen-netfront.c +26 -62

150 lines not on this page · raw message

drivers/parport/parport_pc.c +2 -8
index 903e1285fda0..b0a0d5389f41 100644
@@ -2596,8 +2596,6 @@ enum parport_pc_pci_cards {
 	syba_2p_epp,
 	syba_1p_ecp,
 	titan_010l,
-	titan_1284p1,
-	titan_1284p2,
 	avlab_1p,
 	avlab_2p,
 	oxsemi_952,
@@ -2656,8 +2654,6 @@ static struct parport_pc_pci {
 	/* syba_2p_epp AP138B */	{ 2, { { 0, 0x078 }, { 0, 0x178 }, } },
 	/* syba_1p_ecp W83787 */	{ 1, { { 0, 0x078 }, } },
 	/* titan_010l */		{ 1, { { 3, -1 }, } },
-	/* titan_1284p1 */              { 1, { { 0, 1 }, } },
-	/* titan_1284p2 */		{ 2, { { 0, 1 }, { 2, 3 }, } },
 	/* avlab_1p		*/	{ 1, { { 0, 1}, } },
 	/* avlab_2p		*/	{ 2, { { 0, 1}, { 2, 3 },} },
 	/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2673,8 +2669,8 @@ static struct parport_pc_pci {
 	/* netmos_9705 */               { 1, { { 0, -1 }, } },
 	/* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} },
 	/* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
-	/* netmos_9805 */               { 1, { { 0, -1 }, } },
-	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
+	/* netmos_9805 */		{ 1, { { 0, 1 }, } },
+	/* netmos_9815 */		{ 2, { { 0, 1 }, { 2, 3 }, } },
 	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* netmos_9865 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
@@ -2718,8 +2714,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
 	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
-	{ 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
-	{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
 	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
 	/* AFAVLAB_TK9902 */
 	{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
drivers/pinctrl/pinctrl-sunxi.c +7 -6
index 119d2ddedfe7..6ebf3067bde4 100644
@@ -469,12 +469,6 @@ static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return val;
 }
 
-static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	return pinctrl_gpio_direction_output(chip->base + offset);
-}
-
 static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
 				unsigned offset, int value)
 {
@@ -498,6 +492,13 @@ static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
 	spin_unlock_irqrestore(&pctl->lock, flags);
 }
 
+static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	sunxi_pinctrl_gpio_set(chip, offset, value);
+	return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
 static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
 				const struct of_phandle_args *gpiospec,
 				u32 *flags)
drivers/platform/x86/hp_accel.c +1 -0
index a8e43cf70fac..0ed96df20162 100644
@@ -77,6 +77,7 @@ static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
 static struct acpi_device_id lis3lv02d_device_ids[] = {
 	{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
 	{"HPQ6000", 0}, /* HP Mobile Data Protection System PNP */
+	{"HPQ6007", 0}, /* HP Mobile Data Protection System PNP */
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
drivers/rtc/rtc-max8907.c +5 -6
index 8e45b3c4aa2f..3032178bd9e6 100644
@@ -51,7 +51,7 @@ static irqreturn_t max8907_irq_handler(int irq, void *data)
 {
 	struct max8907_rtc *rtc = data;
 
-	regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x7f, 0);
+	regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
 
 	rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
 
@@ -64,7 +64,7 @@ static void regs_to_tm(u8 *regs, struct rtc_time *tm)
 		bcd2bin(regs[RTC_YEAR1]) - 1900;
 	tm->tm_mon = bcd2bin(regs[RTC_MONTH] & 0x1f) - 1;
 	tm->tm_mday = bcd2bin(regs[RTC_DATE] & 0x3f);
-	tm->tm_wday = (regs[RTC_WEEKDAY] & 0x07) - 1;
+	tm->tm_wday = (regs[RTC_WEEKDAY] & 0x07);
 	if (regs[RTC_HOUR] & HOUR_12) {
 		tm->tm_hour = bcd2bin(regs[RTC_HOUR] & 0x01f);
 		if (tm->tm_hour == 12)
@@ -88,7 +88,7 @@ static void tm_to_regs(struct rtc_time *tm, u8 *regs)
 	regs[RTC_YEAR1] = bin2bcd(low);
 	regs[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
 	regs[RTC_DATE] = bin2bcd(tm->tm_mday);
-	regs[RTC_WEEKDAY] = tm->tm_wday + 1;
+	regs[RTC_WEEKDAY] = tm->tm_wday;
 	regs[RTC_HOUR] = bin2bcd(tm->tm_hour);
 	regs[RTC_MIN] = bin2bcd(tm->tm_min);
 	regs[RTC_SEC] = bin2bcd(tm->tm_sec);
@@ -153,7 +153,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	tm_to_regs(&alrm->time, regs);
 
 	/* Disable alarm while we update the target time */
-	ret = regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x7f, 0);
+	ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -163,8 +163,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 		return ret;
 
 	if (alrm->enabled)
-		ret = regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL,
-					 0x7f, 0x7f);
+		ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x77);
 
 	return ret;
 }
drivers/scsi/bfa/bfad.c +4 -2
index f8ca7becacca..8ebab9c64be4 100644
@@ -1832,7 +1832,7 @@ out:
 static u32 *
 bfad_load_fwimg(struct pci_dev *pdev)
 {
-	if (pdev->device == BFA_PCI_DEVICE_ID_CT2) {
+	if (bfa_asic_id_ct2(pdev->device)) {
 		if (bfi_image_ct2_size == 0)
 			bfad_read_firmware(pdev, &bfi_image_ct2,
 				&bfi_image_ct2_size, BFAD_FW_FILE_CT2);
@@ -1842,12 +1842,14 @@ bfad_load_fwimg(struct pci_dev *pdev)
 			bfad_read_firmware(pdev, &bfi_image_ct,
 				&bfi_image_ct_size, BFAD_FW_FILE_CT);
 		return bfi_image_ct;
-	} else {
+	} else if (bfa_asic_id_cb(pdev->device)) {
 		if (bfi_image_cb_size == 0)
 			bfad_read_firmware(pdev, &bfi_image_cb,
 				&bfi_image_cb_size, BFAD_FW_FILE_CB);
 		return bfi_image_cb;
 	}
+
+	return NULL;
 }
 
 static void
drivers/scsi/virtio_scsi.c +14 -1
index 74b88efde6ad..b26f1a5cc0ec 100644
@@ -957,6 +957,10 @@ static void virtscsi_remove(struct virtio_device *vdev)
 #ifdef CONFIG_PM
 static int virtscsi_freeze(struct virtio_device *vdev)
 {
+	struct Scsi_Host *sh = virtio_scsi_host(vdev);
+	struct virtio_scsi *vscsi = shost_priv(sh);
+
+	unregister_hotcpu_notifier(&vscsi->nb);
 	virtscsi_remove_vqs(vdev);
 	return 0;
 }
@@ -965,8 +969,17 @@ static int virtscsi_restore(struct virtio_device *vdev)
 {
 	struct Scsi_Host *sh = virtio_scsi_host(vdev);
 	struct virtio_scsi *vscsi = shost_priv(sh);
+	int err;
+
+	err = virtscsi_init(vdev, vscsi);
+	if (err)
+		return err;
+
+	err = register_hotcpu_notifier(&vscsi->nb);
+	if (err)
+		vdev->config->del_vqs(vdev);
 
-	return virtscsi_init(vdev, vscsi);
+	return err;
 }
 #endif
 
drivers/staging/lustre/lustre/ptlrpc/niobuf.c +3 -3
index a0e009717a5a..d6047b9535ae 100644
@@ -179,7 +179,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req)
 				  LNET_UNLINK, LNET_INS_AFTER, &me_h);
 		if (rc != 0) {
 			CERROR("%s: LNetMEAttach failed x"LPU64"/%d: rc = %d\n",
-			       desc->bd_export->exp_obd->obd_name, xid,
+			       desc->bd_import->imp_obd->obd_name, xid,
 			       posted_md, rc);
 			break;
 		}
@@ -189,7 +189,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req)
 				  &desc->bd_mds[posted_md]);
 		if (rc != 0) {
 			CERROR("%s: LNetMDAttach failed x"LPU64"/%d: rc = %d\n",
-			       desc->bd_export->exp_obd->obd_name, xid,
+			       desc->bd_import->imp_obd->obd_name, xid,
 			       posted_md, rc);
 			rc2 = LNetMEUnlink(me_h);
 			LASSERT(rc2 == 0);
@@ -219,7 +219,7 @@ int ptlrpc_register_bulk(struct ptlrpc_request *req)
 	/* Holler if peer manages to touch buffers before he knows the xid */
 	if (desc->bd_md_count != total_md)
 		CWARN("%s: Peer %s touched %d buffers while I registered\n",
-		      desc->bd_export->exp_obd->obd_name, libcfs_id2str(peer),
+		      desc->bd_import->imp_obd->obd_name, libcfs_id2str(peer),
 		      total_md - desc->bd_md_count);
 	spin_unlock(&desc->bd_lock);
 
drivers/staging/rtl8712/usb_intf.c +5 -0
index c812d6c7dc31..e3a005da776b 100644
@@ -358,6 +358,10 @@ static u8 key_2char2num(u8 hch, u8 lch)
 	return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
 }
 
+static const struct device_type wlan_type = {
+	.name = "wlan",
+};
+
 /*
  * drv_init() - a device potentially for us
  *
@@ -393,6 +397,7 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
 	padapter->pusb_intf = pusb_intf;
 	usb_set_intfdata(pusb_intf, pnetdev);
 	SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
+	pnetdev->dev.type = &wlan_type;
 	/* step 2. */
 	padapter->dvobj_init = &r8712_usb_dvobj_init;
 	padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
drivers/staging/vt6656/baseband.c +0 -3
index 4aa5ef54b683..22e117440f94 100644
@@ -1464,7 +1464,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
 
             if( bScanning )
             {   // need Max sensitivity //RSSI -69, -70,....
-                if(pDevice->byBBPreEDIndex == 0) break;
                 pDevice->byBBPreEDIndex = 0;
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x30); //CR206(0xCE)
@@ -1607,7 +1606,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
 
             if( bScanning )
             {   // need Max sensitivity  //RSSI -69, -70, ...
-                if(pDevice->byBBPreEDIndex == 0) break;
                 pDevice->byBBPreEDIndex = 0;
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x24); //CR206(0xCE)
@@ -1759,7 +1757,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
         case RF_VT3342A0: //RobertYu:20060627, testing table
             if( bScanning )
             {   // need Max sensitivity  //RSSI -67, -68, ...
-                if(pDevice->byBBPreEDIndex == 0) break;
                 pDevice->byBBPreEDIndex = 0;
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
                 ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x38); //CR206(0xCE)
drivers/staging/vt6656/card.c +1 -1
index 19d3cf451b88..34a24b78c1a7 100644
@@ -731,7 +731,7 @@ u64 CARDqGetNextTBTT(u64 qwTSF, u16 wBeaconInterval)
 
     uBeaconInterval = wBeaconInterval * 1024;
     // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
-	uLowNextTBTT = ((qwTSF & 0xffffffffU) >> 10) << 10;
+	uLowNextTBTT = ((qwTSF & 0xffffffffULL) >> 10) << 10;
 	uLowRemain = (uLowNextTBTT) % uBeaconInterval;
 	uHighRemain = ((0x80000000 % uBeaconInterval) * 2 * (u32)(qwTSF >> 32))
 		% uBeaconInterval;
drivers/staging/zram/zram_drv.c +2 -2
index e06ec4393803..d7ac040e0dc1 100644
@@ -552,14 +552,14 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
 	size_t index;
 	struct zram_meta *meta;
 
-	flush_work(&zram->free_work);
-
 	down_write(&zram->init_lock);
 	if (!zram->init_done) {
 		up_write(&zram->init_lock);
 		return;
 	}
 
+	flush_work(&zram->free_work);
+
 	meta = zram->meta;
 	zram->init_done = 0;
 
drivers/target/iscsi/iscsi_target.c +21 -13
index d5c724b317aa..e12f2aab3c87 100644
@@ -52,7 +52,7 @@
 static LIST_HEAD(g_tiqn_list);
 static LIST_HEAD(g_np_list);
 static DEFINE_SPINLOCK(tiqn_lock);
-static DEFINE_SPINLOCK(np_lock);
+static DEFINE_MUTEX(np_lock);
 
 static struct idr tiqn_idr;
 struct idr sess_idr;
@@ -307,6 +307,9 @@ bool iscsit_check_np_match(
 	return false;
 }
 
+/*
+ * Called with mutex np_lock held
+ */
 static struct iscsi_np *iscsit_get_np(
 	struct __kernel_sockaddr_storage *sockaddr,
 	int network_transport)
@@ -314,11 +317,10 @@ static struct iscsi_np *iscsit_get_np(
 	struct iscsi_np *np;
 	bool match;
 
-	spin_lock_bh(&np_lock);
 	list_for_each_entry(np, &g_np_list, np_list) {
-		spin_lock(&np->np_thread_lock);
+		spin_lock_bh(&np->np_thread_lock);
 		if (np->np_thread_state != ISCSI_NP_THREAD_ACTIVE) {
-			spin_unlock(&np->np_thread_lock);
+			spin_unlock_bh(&np->np_thread_lock);
 			continue;
 		}
 
@@ -330,13 +332,11 @@ static struct iscsi_np *iscsit_get_np(
 			 * while iscsi_tpg_add_network_portal() is called.
 			 */
 			np->np_exports++;
-			spin_unlock(&np->np_thread_lock);
-			spin_unlock_bh(&np_lock);
+			spin_unlock_bh(&np->np_thread_lock);
 			return np;
 		}
-		spin_unlock(&np->np_thread_lock);
+		spin_unlock_bh(&np->np_thread_lock);
 	}
-	spin_unlock_bh(&np_lock);
 
 	return NULL;
 }
@@ -350,16 +350,22 @@ struct iscsi_np *iscsit_add_np(
 	struct sockaddr_in6 *sock_in6;
 	struct iscsi_np *np;
 	int ret;
+
+	mutex_lock(&np_lock);
+
 	/*
 	 * Locate the existing struct iscsi_np if already active..
 	 */
 	np = iscsit_get_np(sockaddr, network_transport);
-	if (np)
+	if (np) {
+		mutex_unlock(&np_lock);
 		return np;
+	}
 
 	np = kzalloc(sizeof(struct iscsi_np), GFP_KERNEL);
 	if (!np) {
 		pr_err("Unable to allocate memory for struct iscsi_np\n");
+		mutex_unlock(&np_lock);
 		return ERR_PTR(-ENOMEM);
 	}
 
@@ -382,6 +388,7 @@ struct iscsi_np *iscsit_add_np(
 	ret = iscsi_target_setup_login_socket(np, sockaddr);
 	if (ret != 0) {
 		kfree(np);
+		mutex_unlock(&np_lock);
 		return ERR_PTR(ret);
 	}
 
@@ -390,6 +397,7 @@ struct iscsi_np *iscsit_add_np(
 		pr_err("Unable to create kthread: iscsi_np\n");
 		ret = PTR_ERR(np->np_thread);
 		kfree(np);
+		mutex_unlock(&np_lock);
 		return ERR_PTR(ret);
 	}
 	/*
@@ -400,10 +408,10 @@ struct iscsi_np *iscsit_add_np(
 	 * point because iscsi_np has not been added to g_np_list yet.
 	 */
 	np->np_exports = 1;
+	np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
 
-	spin_lock_bh(&np_lock);
 	list_add_tail(&np->np_list, &g_np_list);
-	spin_unlock_bh(&np_lock);
+	mutex_unlock(&np_lock);
 
 	pr_debug("CORE[0] - Added Network Portal: %s:%hu on %s\n",
 		np->np_ip, np->np_port, np->np_transport->name);
@@ -470,9 +478,9 @@ int iscsit_del_np(struct iscsi_np *np)
 
 	np->np_transport->iscsit_free_np(np);
 
-	spin_lock_bh(&np_lock);
+	mutex_lock(&np_lock);
 	list_del(&np->np_list);
-	spin_unlock_bh(&np_lock);
+	mutex_unlock(&np_lock);
 
 	pr_debug("CORE[0] - Removed Network Portal: %s:%hu on %s\n",
 		np->np_ip, np->np_port, np->np_transport->name);
drivers/target/iscsi/iscsi_target_nego.c +1 -1
index a972145dbaaa..76dc32fc5e1b 100644
@@ -1192,7 +1192,7 @@ get_target:
 	 */
 alloc_tags:
 	tag_num = max_t(u32, ISCSIT_MIN_TAGS, queue_depth);
-	tag_num += (tag_num / 2) + ISCSIT_EXTRA_TAGS;
+	tag_num = (tag_num * 2) + ISCSIT_EXTRA_TAGS;
 	tag_size = sizeof(struct iscsi_cmd) + conn->conn_transport->priv_size;
 
 	ret = transport_alloc_session_tags(sess->se_sess, tag_num, tag_size);
drivers/tty/serial/8250/8250_core.c +4 -0
index 570df9d2a5d2..4f6e01cf67f7 100644
@@ -2670,6 +2670,10 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (port->type == PORT_16550A && port->iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
 
+	/* HW bugs may trigger IRQ while IIR == NO_INT */
+	if (port->type == PORT_TEGRA)
+		up->bugs |= UART_BUG_NOMSR;
+
 	if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
 
drivers/tty/serial/8250/8250_pci.c +6 -2
index c810da7c7a88..f5df8b7067ad 100644
@@ -1260,10 +1260,10 @@ static int pci_quatech_init(struct pci_dev *dev)
 		unsigned long base = pci_resource_start(dev, 0);
 		if (base) {
 			u32 tmp;
-			outl(inl(base + 0x38), base + 0x38);
+			outl(inl(base + 0x38) | 0x00002000, base + 0x38);
 			tmp = inl(base + 0x3c);
 			outl(tmp | 0x01000000, base + 0x3c);
-			outl(tmp, base + 0x3c);
+			outl(tmp &= ~0x01000000, base + 0x3c);
 		}
 	}
 	return 0;
@@ -1545,6 +1545,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_TITAN_200V3	0xA306
 #define PCI_DEVICE_ID_TITAN_400V3	0xA310
 #define PCI_DEVICE_ID_TITAN_410V3	0xA312
 #define PCI_DEVICE_ID_TITAN_800V3	0xA314
@@ -4140,6 +4141,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_oxsemi_2_4000000 },
+	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
 	{	PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_921600 },
drivers/tty/serial/atmel_serial.c +28 -17

100 lines not on this page · raw message

drivers/usb/chipidea/ci.h +24 -2
index 1c94fc5257f4..5ad448d0fb7d 100644
@@ -135,6 +135,7 @@ struct hw_bank {
  * @id_event: indicates there is an id event, and handled at ci_otg_work
  * @b_sess_valid_event: indicates there is a vbus event, and handled
  * at ci_otg_work
+ * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -173,6 +174,7 @@ struct ci_hdrc {
 	struct dentry			*debugfs;
 	bool				id_event;
 	bool				b_sess_valid_event;
+	bool				imx28_write_fix;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
@@ -253,6 +255,26 @@ static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
 	return ioread32(ci->hw_bank.regmap[reg]) & mask;
 }
 
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+	__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+}
+#endif
+
+static inline void __hw_write(struct ci_hdrc *ci, u32 val,
+		void __iomem *addr)
+{
+	if (ci->imx28_write_fix)
+		imx28_ci_writel(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
 /**
  * hw_write: writes to a hw register
  * @reg:  register index
@@ -266,7 +288,7 @@ static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
 		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
 			| (data & mask);
 
-	iowrite32(data, ci->hw_bank.regmap[reg]);
+	__hw_write(ci, data, ci->hw_bank.regmap[reg]);
 }
 
 /**
@@ -281,7 +303,7 @@ static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
 {
 	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
 
-	iowrite32(val, ci->hw_bank.regmap[reg]);
+	__hw_write(ci, val, ci->hw_bank.regmap[reg]);
 	return val;
 }
 
drivers/usb/chipidea/ci_hdrc_imx.c +26 -6
index be822a2c1776..76a67fb6ea32 100644
@@ -23,6 +23,26 @@
 #include "ci.h"
 #include "ci_hdrc_imx.h"
 
+#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
+
+struct ci_hdrc_imx_platform_flag {
+	unsigned int flags;
+};
+
+static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
+};
+
+static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
+	.flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+};
+
+static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
+	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
+
 struct ci_hdrc_imx_data {
 	struct usb_phy *phy;
 	struct platform_device *ci_pdev;
@@ -82,6 +102,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 				  CI_HDRC_DISABLE_STREAMING,
 	};
 	int ret;
+	const struct of_device_id *of_id =
+			of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+	const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
@@ -121,6 +144,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 
 	pdata.phy = data->phy;
 
+	if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
+		pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
+
 	if (!pdev->dev.dma_mask)
 		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	if (!pdev->dev.coherent_dma_mask)
@@ -187,12 +213,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
-	{ .compatible = "fsl,imx27-usb", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
-
 static struct platform_driver ci_hdrc_imx_driver = {
 	.probe = ci_hdrc_imx_probe,
 	.remove = ci_hdrc_imx_remove,
drivers/usb/chipidea/core.c +2 -0
index d6a50b7bb4ca..7e8dceb4c634 100644
@@ -497,6 +497,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		ci->transceiver = ci->platdata->phy;
 	else
 		ci->global_phy = true;
+	ci->imx28_write_fix = !!(ci->platdata->flags &
+		CI_HDRC_IMX28_WRITE_FIX);
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
drivers/usb/chipidea/host.c +1 -0
index 5d874d5cf500..e3b9f98dfcd6 100644
@@ -65,6 +65,7 @@ static int host_start(struct ci_hdrc *ci)
 	ehci->caps = ci->hw_bank.cap;
 	ehci->has_hostpc = ci->hw_bank.lpm;
 	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
+	ehci->imx28_write_fix = ci->imx28_write_fix;
 
 	if (ci->platdata->reg_vbus) {
 		ret = regulator_enable(ci->platdata->reg_vbus);
drivers/usb/chipidea/otg.h +3 -3
index 2d9f090733bc..449bee07f4fe 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
  *
  * Author: Peter Chen
  *
@@ -19,12 +19,12 @@ static inline void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits)
 
 static inline void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
 {
-	hw_write(ci, OP_OTGSC, bits, bits);
+	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, bits);
 }
 
 static inline void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
 {
-	hw_write(ci, OP_OTGSC, bits, 0);
+	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, 0);
 }
 
 int ci_hdrc_otg_init(struct ci_hdrc *ci);
drivers/usb/chipidea/udc.c +17 -2
index d98fa254eaaf..94c26acfd5a4 100644
@@ -394,6 +394,14 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
 	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
 	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
+			mul++;
+		node->ptr->token |= mul << __ffs(TD_MULTO);
+	}
 
 	temp = (u32) (hwreq->req.dma + hwreq->req.actual);
 	if (length) {
@@ -516,10 +524,11 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	hwep->qh.ptr->td.token &=
 		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
 
-	if (hwep->type == USB_ENDPOINT_XFER_ISOC) {
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
 		u32 mul = hwreq->req.length / hwep->ep.maxpacket;
 
-		if (hwreq->req.length % hwep->ep.maxpacket)
+		if (hwreq->req.length == 0
+				|| hwreq->req.length % hwep->ep.maxpacket)
 			mul++;
 		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
 	}
@@ -1172,6 +1181,12 @@ static int ep_enable(struct usb_ep *ep,
 	if (hwep->num)
 		cap |= QH_ZLT;
 	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+	/*
+	 * For ISO-TX, we set mult at QH as the largest value, and use
+	 * MultO at TD as real mult value.
+	 */
+	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+		cap |= 3 << __ffs(QH_MULT);
 
 	hwep->qh.ptr->cap = cpu_to_le32(cap);
 
drivers/usb/core/config.c +0 -7
index a6b2cabe7930..548d1996590f 100644
@@ -651,10 +651,6 @@ void usb_destroy_configuration(struct usb_device *dev)
  *
  * hub-only!! ... and only in reset path, or usb_new_device()
  * (used by real hubs and virtual root hubs)
- *
- * NOTE: if this is a WUSB device and is not authorized, we skip the
- *       whole thing. A non-authorized USB device has no
- *       configurations.
  */
 int usb_get_configuration(struct usb_device *dev)
 {
@@ -666,8 +662,6 @@ int usb_get_configuration(struct usb_device *dev)
 	struct usb_config_descriptor *desc;
 
 	cfgno = 0;
-	if (dev->authorized == 0)	/* Not really an error */
-		goto out_not_authorized;
 	result = -ENOMEM;
 	if (ncfg > USB_MAXCONFIG) {
 		dev_warn(ddev, "too many configurations: %d, "
@@ -751,7 +745,6 @@ int usb_get_configuration(struct usb_device *dev)
 
 err:
 	kfree(desc);
-out_not_authorized:
 	dev->descriptor.bNumConfigurations = cfgno;
 err2:
 	if (result == -ENOMEM)
drivers/usb/core/hub.c +16 -38

92 lines not on this page · raw message

drivers/usb/host/ehci.h +17 -1
index 291db7d09f22..2a1f38d209f0 100644
@@ -203,6 +203,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
@@ -679,6 +680,18 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
 #endif
 }
 
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ehci_writel(const unsigned int val,
+		volatile __u32 __iomem *addr)
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci-ring.c +1 -1
index 55fc0c39b7e1..fec3c8654ccd 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci.c +5 -2
index ed6c186a5393..1dceec25223e 100644

Lines of this file are not shown. View the raw message.

drivers/usb/host/xhci.h +1 -1
index ed3a425de8ce..6b3164c75c98 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/cypress_m8.h +1 -1
index b461311a2ae7..ce13e61b7d55 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/ftdi_sio.c +15 -2
index dccb4db98ea1..6f1cbbf51ae8 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/option.c +15 -0
index cc7a24154490..5c86f57e4afa 100644

Lines of this file are not shown. View the raw message.

drivers/usb/serial/pl2303.c +25 -9
index 1e3318dfa1cb..beb8edce4ef2 100644

Lines of this file are not shown. View the raw message.

drivers/usb/storage/unusual_devs.h +7 -0
index de32cfa5bfa6..ad06255c2ade 100644

Lines of this file are not shown. View the raw message.

fs/btrfs/extent-tree.c +1 -1
index d58bef130a41..b256ddc1cb53 100644

Lines of this file are not shown. View the raw message.

fs/btrfs/ioctl.c +6 -0
index 8747feb77ec9..669eb53273c0 100644

Lines of this file are not shown. View the raw message.

fs/dcache.c +0 -1
index f27c1d12a1fa..4021e0172602 100644

Lines of this file are not shown. View the raw message.

fs/ext4/inline.c +5 -3
index d9ecbf1113a7..46b366897553 100644

Lines of this file are not shown. View the raw message.

fs/hpfs/alloc.c +64 -2

66 lines not on this page · raw message

fs/hpfs/hpfs_fn.h +1 -1
index 1b398636e990..c65f0bf326a1 100644

Lines of this file are not shown. View the raw message.

fs/hpfs/super.c +22 -7
index 4334cda8dba1..3d6f8972d06e 100644

Lines of this file are not shown. View the raw message.

fs/mount.h +1 -1
index 64a858143ff9..68d80bdcd081 100644

Lines of this file are not shown. View the raw message.

include/linux/hugetlb.h +6 -0
index 0393270466c3..6125579b5207 100644

Lines of this file are not shown. View the raw message.

include/linux/libata.h +2 -0
index 9b503376738f..bec6dbe939a0 100644

Lines of this file are not shown. View the raw message.

include/linux/usb/chipidea.h +1 -0
index 7d399671a566..708bd119627f 100644

Lines of this file are not shown. View the raw message.

mm/hugetlb.c +17 -0
index 0b7656e804d1..f0a4ca4cc219 100644

Lines of this file are not shown. View the raw message.

mm/mempolicy.c +1 -1
index 6b22d8f9bfb8..927a69cf354a 100644

Lines of this file are not shown. View the raw message.

mm/swap.c +83 -60

143 lines not on this page · raw message

net/compat.c +2 -7
index dd32e34c1e2c..f50161fb812e 100644

Lines of this file are not shown. View the raw message.

net/core/filter.c +2 -28
index 01b780856db2..ad30d626a5bd 100644

Lines of this file are not shown. View the raw message.

net/ieee802154/nl-phy.c +4 -2
index 22b1a7058fd3..4efd2375d7e1 100644

Lines of this file are not shown. View the raw message.

net/ipv4/fib_frontend.c +2 -0
index b3f627ac4ed8..f7f8cff67344 100644

Lines of this file are not shown. View the raw message.

net/ipv4/inet_diag.c +3 -1
index 31cf54d18221..45dbdab915e2 100644

Lines of this file are not shown. View the raw message.

net/ipv4/ip_gre.c +1 -1
index e560ef34cf4b..d30636080a11 100644

Lines of this file are not shown. View the raw message.

net/ipv4/ip_input.c +1 -1
index 054a3e97d822..3d4da2c16b6a 100644

Lines of this file are not shown. View the raw message.

net/ipv4/ip_tunnel.c +1 -0
index 254f11c24aa5..995a0bb33a65 100644

Lines of this file are not shown. View the raw message.

net/ipv4/ipmr.c +5 -2
index 62212c772a4b..1672409f5ba5 100644

Lines of this file are not shown. View the raw message.

net/ipv4/tcp_metrics.c +32 -19

51 lines not on this page · raw message

net/ipv6/ip6_input.c +1 -1
index 302d6fb1ff2b..51d54dc376f3 100644

Lines of this file are not shown. View the raw message.

net/ipv6/ip6mr.c +5 -2
index f365310bfcca..0eb4038a4d63 100644

Lines of this file are not shown. View the raw message.

net/rds/ib_recv.c +3 -4
index 8eb9501e3d60..b7ebe23cdedf 100644

Lines of this file are not shown. View the raw message.

sound/core/init.c +2 -2
index 6b9087115da2..d04785144601 100644

Lines of this file are not shown. View the raw message.

sound/pci/Kconfig +12 -0
index 46ed9e8ae0fd..cc9fd67a50df 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/hda_generic.c +4 -2
index c7f6d1cab606..7d4ccfa48008 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_analog.c +11 -11
index 38aa080681a3..31230c68b603 100644

Lines of this file are not shown. View the raw message.

sound/pci/hda/patch_hdmi.c +73 -27

100 lines not on this page · raw message

sound/pci/hda/patch_realtek.c +18 -1
index dce47c414ea7..56b62555eef4 100644

Lines of this file are not shown. View the raw message.

sound/pci/rme9652/rme9652.c +1 -1
index b96d9e1adf6d..3717f2dd30be 100644

Lines of this file are not shown. View the raw message.

sound/soc/codecs/adau1701.c +1 -1
index ebff1128be59..adee866f463f 100644

Lines of this file are not shown. View the raw message.

sound/soc/codecs/wm5110.c +48 -0

48 lines not on this page · raw message

tools/perf/util/session.c +6 -1
index 568b750c01f6..9d78c70be71e 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#2 lore raw
In reply to Greg KH
Quoted 4 lines · Greg KH

I'm announcing the release of the 3.12.10 kernel.

All users of the 3.12 kernel series must upgrade.

Quoted 9 lines

The updated 3.12.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.12.y
and can be browsed at the normal kernel.org git web browser:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary

thanks,

greg k-h

Ditto for v3.12.y missing the following two upstream patches:

commit 6f6b5d1ec56acdeab0503d2b823f6f88a0af493e

Author: Kent Overstreet <[email protected]>
Date:   Sun Jan 19 08:26:37 2014 +0000

percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask

commit 555b270e25b0279b98083518a85f4b1da144a181

Author: Nicholas Bellinger <[email protected]>
Date:   Mon Jan 20 03:36:24 2014 +0000

iscsi-target: Fix connection reset hang with percpu_ida_alloc

The two patches have been respun for v3.12.y code here:

http://www.spinics.net/lists/target-devel/msg06193.html
http://www.spinics.net/lists/target-devel/msg06194.html

Please apply for v3.12.y ASAP.

Thank you,

--nab

#3 lore raw
In reply to Greg KH
Quoted 2 lines · Greg KH

Tomas Winkler (1): mei: use hbm idle state to prevent spurious resets

Hi,

I'm getting this now:
drivers/misc/mei/hbm.c: In function 'mei_hbm_dispatch':
drivers/misc/mei/hbm.c:596:3: warning: 'return' with a value, in function returning void

Care to fix that?

thanks,

Signature · 2 lines
js
suse labs
#4 lore raw
Quoted 4 lines · Jiri Slaby

I'm getting this now:
drivers/misc/mei/hbm.c: In function 'mei_hbm_dispatch':
drivers/misc/mei/hbm.c:596:3: warning: 'return' with a value, in function returning void

Greg already queued my trivial patch to fix this for the v3.13.y branch. (See commit 126be2c995203e82ebaeb39d3b41f742e98046e9 in stable-queue.git).

I didn't realize this warning also appeared in the v3.12.y branch (which I do not track). I guess that an identical patch can also be applied to the v3.12.y branch.

Paul Bolle