Skip to contentSkip to conversation

x86, tsc: Fallback to normal calibration if fast MSR calibration fails

PATCH Superseded Mika Westerberg 2 participants 4 messages Feb 10, 2014 x86

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/2 x86, tsc: Fallback to normal calibration if fast MSR calibration fails

From: Thomas Gleixner <[email protected]>

If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below:

divide error: 0000 [#1] PREEMPT SMP

 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails.
2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration.

---
Thomas, I hope you don't mind that I added your SoB to the patch. It is after all from you.

 arch/x86/include/asm/tsc.h |  2 +-
 arch/x86/kernel/tsc.c      |  7 ++-----
 arch/x86/kernel/tsc_msr.c  | 28 ++++++++++++++--------------
 3 files changed, 17 insertions(+), 20 deletions(-)
arch/x86/include/asm/tsc.h +1 -1
index 57ae63cd6ee2..94605c0e9cee 100644
@@ -66,6 +66,6 @@ extern void tsc_save_sched_clock_state(void);
 extern void tsc_restore_sched_clock_state(void);
 
 /* MSR based TSC calibration for Intel Atom SoC platforms */
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate);
+unsigned long try_msr_calibrate_tsc(void);
 
 #endif /* _ASM_X86_TSC_H */
arch/x86/kernel/tsc.c +2 -5
index 19e5adb49a27..6702ee72a38f 100644
@@ -653,13 +653,10 @@ unsigned long native_calibrate_tsc(void)
 
 	/* Calibrate TSC using MSR for Intel Atom SoCs */
 	local_irq_save(flags);
-	i = try_msr_calibrate_tsc(&fast_calibrate);
+	fast_calibrate = try_msr_calibrate_tsc();
 	local_irq_restore(flags);
-	if (i >= 0) {
-		if (i == 0)
-			pr_warn("Fast TSC calibration using MSR failed\n");
+	if (fast_calibrate)
 		return fast_calibrate;
-	}
 
 	local_irq_save(flags);
 	fast_calibrate = quick_pit_calibrate();
arch/x86/kernel/tsc_msr.c +14 -14
index 8b5434f4389f..5dfff5809e74 100644
@@ -77,21 +77,18 @@ static int match_cpu(u8 family, u8 model)
 
 /*
  * Do MSR calibration only for known/supported CPUs.
- * Return values:
- * -1: CPU is unknown/unsupported for MSR based calibration
- *  0: CPU is known/supported, but calibration failed
- *  1: CPU is known/supported, and calibration succeeded
+ *
+ * Returns the calibration value or 0 if MSR calibration failed.
  */
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
+unsigned long try_msr_calibrate_tsc(void)
 {
-	int cpu_index;
 	u32 lo, hi, ratio, freq_id, freq;
+	unsigned long res;
+	int cpu_index;
 
 	cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model);
 	if (cpu_index < 0)
-		return -1;
-
-	*fast_calibrate = 0;
+		return 0;
 
 	if (freq_desc_tables[cpu_index].msr_plat) {
 		rdmsr(MSR_PLATFORM_INFO, lo, hi);
@@ -103,7 +100,7 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
 	pr_info("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio);
 
 	if (!ratio)
-		return 0;
+		goto fail;
 
 	/* Get FSB FREQ ID */
 	rdmsr(MSR_FSB_FREQ, lo, hi);
@@ -112,16 +109,19 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
 	pr_info("Resolved frequency ID: %u, frequency: %u KHz\n",
 				freq_id, freq);
 	if (!freq)
-		return 0;
+		goto fail;
 
 	/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
-	*fast_calibrate = freq * ratio;
-	pr_info("TSC runs at %lu KHz\n", *fast_calibrate);
+	res = freq * ratio;
+	pr_info("TSC runs at %lu KHz\n", res);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	lapic_timer_frequency = (freq * 1000) / HZ;
 	pr_info("lapic_timer_frequency = %d\n", lapic_timer_frequency);
 #endif
+	return res;
 
-	return 1;
+fail:
+	pr_warn("Fast TSC calibration using MSR failed\n");
+	return 0;
 }
Signature · 1 line
1.8.5.2
#1 lore raw

PATCH v4 2/2 x86, tsc: Add missing Baytrail frequency to the table

Intel Baytrail is based on Silvermont core so MSR_FSB_FREQ[2:0] == 0 means that the CPU reference clock runs at 83.3MHz. Add this missing frequency to the table.

---
 arch/x86/kernel/tsc_msr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/tsc_msr.c +1 -1
index 5dfff5809e74..92ae6acac8a7 100644
@@ -53,7 +53,7 @@ static struct freq_desc freq_desc_tables[] = {
 	/* TNG */
 	{ 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } },
 	/* VLV2 */
-	{ 6, 0x37, 1, { 0, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
+	{ 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
 	/* ANN */
 	{ 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } },
 };
Signature · 1 line
1.8.5.2
#2 lore raw
In reply to Mika Westerberg
Quoted 42 lines · Mika Westerberg

From: Thomas Gleixner <[email protected]>

If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below:

divide error: 0000 [#1] PREEMPT SMP

 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails.
2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration.

Quoted 5 lines

---
Thomas, I hope you don't mind that I added your SoB to the patch. It is after all from you.

You just missed to add your own SOB which tells us that you conveyed the patch.

Thanks,

tglx

#3 lore raw
Quoted 43 lines · Thomas Gleixner
Quoted 42 lines · Mika Westerberg

From: Thomas Gleixner <[email protected]>

If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below:

divide error: 0000 [#1] PREEMPT SMP

 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails.
2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration.

Quoted 8 lines
Quoted 5 lines

---
Thomas, I hope you don't mind that I added your SoB to the patch. It is after all from you.

You just missed to add your own SOB which tells us that you conveyed the patch.

Ah, right. Here it is,

Is that enough or do you want me to resend this patch? Thanks.