Skip to contentSkip to conversation

target-ppc: Base ISA V2.07 for Power8

PATCH Applied Tom Musta 2 participants 13 messages Feb 10, 2014 – Feb 20, 2014

lore
Share & tools
lore

Tom Musta

author
#0 lore raw

v3 cover target-ppc: Base ISA V2.07 for Power8

This patch series adds the branch and integer instructions that were introduced in Power ISA 2.07. Specifically,

- There is a new conditional Branch to Address Register (bctar) instruction.
- The load/store quadword instructions are now supported in user mode (Book I).
- Quadword atomic instructions have been added (lqarx, stqcx.).

ISA 2.07 additions for other categories (VSX, Altivec, Decimal Floating Point, transactional memory) are not included in this patch series; they will be contributed via other patches.

V2: Addressing review comments from Alex Graf:
(1) Refactored user-mode and Little Endian checks in the load and store quadword instructions.
(2) Added reserve_val2 element to CPU state in support of quadword atomic instructions.

V3: Addressiew review comments from Alex Graf:
(1) Moved declaration of local variables to the beginning of the block (a la C89 standard).
(2) Fixed bugs in handling of secondary reservation doubleword used in lqarx and stqcx. instructions.

Tom Musta (9):
target-ppc: Add Flag for bctar
target-ppc: Add Target Address SPR (TAR) to Power8
target-ppc: Add bctar Instruction
target-ppc: Add Flag for ISA 2.07 Load/Store Quadword Instructions
target-ppc: Add is_user_mode Utility Routine
target-ppc: Load Quadword
target-ppc: Store Quadword
target-ppc: Add Load Quadword and Reserve
target-ppc: Add Store Quadword Conditional

 linux-user/main.c           |   18 +++++-
 target-ppc/cpu.h            |   10 ++-
 target-ppc/translate.c      |  158 ++++++++++++++++++++++++++++++++++---------
 target-ppc/translate_init.c |   19 +++++-
 4 files changed, 168 insertions(+), 37 deletions(-)
author
#1 lore raw

PATCH v3 1/9 target-ppc: Add Flag for bctar

This patch adds a flag for the bctar instruction. This instruction is being introduced via Power ISA 2.07.

Also, the flag is added to the Power8 machine model since the P8 processor supports this instruction.

---
 target-ppc/cpu.h            |    6 ++++--
 target-ppc/translate_init.c |    2 +-
 2 files changed, 5 insertions(+), 3 deletions(-)
target-ppc/cpu.h +4 -2
index 2b8c205..b9d6b10 100644
@@ -1887,12 +1887,14 @@ enum {
     PPC2_FP_CVT_ISA206 = 0x0000000000000400ULL,
     /* ISA 2.06B floating point test instructions                            */
     PPC2_FP_TST_ISA206 = 0x0000000000000800ULL,
-
+    /* ISA 2.07 bctar instruction                                            */
+    PPC2_BCTAR_ISA207  = 0x0000000000001000ULL,
 
 #define PPC_TCG_INSNS2 (PPC2_BOOKE206 | PPC2_VSX | PPC2_PRCNTL | PPC2_DBRX | \
                         PPC2_ISA205 | PPC2_VSX207 | PPC2_PERM_ISA206 | \
                         PPC2_DIVE_ISA206 | PPC2_ATOMIC_ISA206 | \
-                        PPC2_FP_CVT_ISA206 | PPC2_FP_TST_ISA206)
+                        PPC2_FP_CVT_ISA206 | PPC2_FP_TST_ISA206 | \
+                        PPC2_BCTAR_ISA207)
 };
 
 /*****************************************************************************/
target-ppc/translate_init.c +1 -1
index a83c964..62bb200 100644
@@ -7327,7 +7327,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
     pcc->insns_flags2 = PPC2_VSX | PPC2_VSX207 | PPC2_DFP | PPC2_DBRX |
                         PPC2_PERM_ISA206 | PPC2_DIVE_ISA206 |
                         PPC2_ATOMIC_ISA206 | PPC2_FP_CVT_ISA206 |
-                        PPC2_FP_TST_ISA206;
+                        PPC2_FP_TST_ISA206 | PPC2_BCTAR_ISA207;
     pcc->msr_mask = 0x800000000284FF36ULL;
     pcc->mmu_model = POWERPC_MMU_2_06;
 #if defined(CONFIG_SOFTMMU)
Signature · 1 line
1.7.1
author
#2 lore raw

PATCH v3 2/9 target-ppc: Add Target Address SPR (TAR) to Power8

In reply to Tom Musta

This patch adds support for the Target Address Register (TAR) to the Power8 model.

Because supported SPRs are typically identified in an init_proc_*() function and because the Power8 model is currently just using the init_proc_POWER7() function, a new init_proc_POWER8() function is added and plugged into the P8 model.

---
 target-ppc/cpu.h            |    1 +
 target-ppc/translate_init.c |   14 +++++++++++++-
 2 files changed, 14 insertions(+), 1 deletions(-)
target-ppc/cpu.h +1 -0
index b9d6b10..810cf6a 100644
@@ -1508,6 +1508,7 @@ static inline int cpu_mmu_index (CPUPPCState *env)
 #define SPR_RCPU_L2U_RA2      (0x32A)
 #define SPR_MPC_MD_DBRAM1     (0x32A)
 #define SPR_RCPU_L2U_RA3      (0x32B)
+#define SPR_TAR               (0x32F)
 #define SPR_440_INV0          (0x370)
 #define SPR_440_INV1          (0x371)
 #define SPR_440_INV2          (0x372)
target-ppc/translate_init.c +13 -1
index 62bb200..9dd6684 100644
@@ -7301,6 +7301,18 @@ POWERPC_FAMILY(POWER7P)(ObjectClass *oc, void *data)
     pcc->l1_icache_size = 0x8000;
 }
 
+static void init_proc_POWER8(CPUPPCState *env)
+{
+    /* inherit P7 */
+    init_proc_POWER7(env);
+
+    /* P8 supports the TAR */
+    spr_register(env, SPR_TAR, "TAR",
+                 &spr_read_generic, &spr_write_generic,
+                 &spr_read_generic, &spr_write_generic,
+                 0x00000000);
+}
+
 POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(oc);
@@ -7310,7 +7322,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
     dc->desc = "POWER8";
     pcc->pvr = CPU_POWERPC_POWER8_BASE;
     pcc->pvr_mask = CPU_POWERPC_POWER8_MASK;
-    pcc->init_proc = init_proc_POWER7;
+    pcc->init_proc = init_proc_POWER8;
     pcc->check_pow = check_pow_nocheck;
     pcc->insns_flags = PPC_INSNS_BASE | PPC_STRING | PPC_MFTB |
                        PPC_FLOAT | PPC_FLOAT_FSEL | PPC_FLOAT_FRES |
Signature · 1 line
1.7.1
author
#3 lore raw

PATCH v3 3/9 target-ppc: Add bctar Instruction

In reply to Tom Musta

This patch adds the Branch Conditional to Address Register (bctar) instruction.

---
 target-ppc/translate.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)
target-ppc/translate.c +10 -1
index d9abcca..b89b4ba 100644
@@ -3745,6 +3745,7 @@ static void gen_b(DisasContext *ctx)
 #define BCOND_IM  0
 #define BCOND_LR  1
 #define BCOND_CTR 2
+#define BCOND_TAR 3
 
 static inline void gen_bcond(DisasContext *ctx, int type)
 {
@@ -3753,10 +3754,12 @@ static inline void gen_bcond(DisasContext *ctx, int type)
     TCGv target;
 
     ctx->exception = POWERPC_EXCP_BRANCH;
-    if (type == BCOND_LR || type == BCOND_CTR) {
+    if (type == BCOND_LR || type == BCOND_CTR || type == BCOND_TAR) {
         target = tcg_temp_local_new();
         if (type == BCOND_CTR)
             tcg_gen_mov_tl(target, cpu_ctr);
+        else if (type == BCOND_TAR)
+            gen_load_spr(target, SPR_TAR);
         else
             tcg_gen_mov_tl(target, cpu_lr);
     } else {
@@ -3838,6 +3841,11 @@ static void gen_bclr(DisasContext *ctx)
     gen_bcond(ctx, BCOND_LR);
 }
 
+static void gen_bctar(DisasContext *ctx)
+{
+    gen_bcond(ctx, BCOND_TAR);
+}
+
 /***                      Condition register logical                       ***/
 #define GEN_CRLOGIC(name, tcg_op, opc)                                        \
 static void glue(gen_, name)(DisasContext *ctx)                                       \
@@ -9569,6 +9577,7 @@ GEN_HANDLER(b, 0x12, 0xFF, 0xFF, 0x00000000, PPC_FLOW),
 GEN_HANDLER(bc, 0x10, 0xFF, 0xFF, 0x00000000, PPC_FLOW),
 GEN_HANDLER(bcctr, 0x13, 0x10, 0x10, 0x00000000, PPC_FLOW),
 GEN_HANDLER(bclr, 0x13, 0x10, 0x00, 0x00000000, PPC_FLOW),
+GEN_HANDLER_E(bctar, 0x13, 0x10, 0x11, 0, PPC_NONE, PPC2_BCTAR_ISA207),
 GEN_HANDLER(mcrf, 0x13, 0x00, 0xFF, 0x00000001, PPC_INTEGER),
 GEN_HANDLER(rfi, 0x13, 0x12, 0x01, 0x03FF8001, PPC_FLOW),
 #if defined(TARGET_PPC64)
Signature · 1 line
1.7.1
author
#4 lore raw

PATCH v3 4/9 target-ppc: Add Flag for ISA 2.07 Load/Store Quadword Instructions

In reply to Tom Musta

This patch adds a flag to identify the load/store quadword instructions that are introduced with Power ISA 2.07.

The flag is added to the Power8 model since P8 supports these instructions.

---
 target-ppc/cpu.h            |    4 +++-
 target-ppc/translate_init.c |    3 ++-
 2 files changed, 5 insertions(+), 2 deletions(-)
target-ppc/cpu.h +3 -1
index 810cf6a..b66dd44 100644
@@ -1890,12 +1890,14 @@ enum {
     PPC2_FP_TST_ISA206 = 0x0000000000000800ULL,
     /* ISA 2.07 bctar instruction                                            */
     PPC2_BCTAR_ISA207  = 0x0000000000001000ULL,
+    /* ISA 2.07 load/store quadword                                          */
+    PPC2_LSQ_ISA207    = 0x0000000000002000ULL,
 
 #define PPC_TCG_INSNS2 (PPC2_BOOKE206 | PPC2_VSX | PPC2_PRCNTL | PPC2_DBRX | \
                         PPC2_ISA205 | PPC2_VSX207 | PPC2_PERM_ISA206 | \
                         PPC2_DIVE_ISA206 | PPC2_ATOMIC_ISA206 | \
                         PPC2_FP_CVT_ISA206 | PPC2_FP_TST_ISA206 | \
-                        PPC2_BCTAR_ISA207)
+                        PPC2_BCTAR_ISA207 | PPC2_LSQ_ISA207)
 };
 
 /*****************************************************************************/
target-ppc/translate_init.c +2 -1
index 9dd6684..886238a 100644
@@ -7339,7 +7339,8 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
     pcc->insns_flags2 = PPC2_VSX | PPC2_VSX207 | PPC2_DFP | PPC2_DBRX |
                         PPC2_PERM_ISA206 | PPC2_DIVE_ISA206 |
                         PPC2_ATOMIC_ISA206 | PPC2_FP_CVT_ISA206 |
-                        PPC2_FP_TST_ISA206 | PPC2_BCTAR_ISA207;
+                        PPC2_FP_TST_ISA206 | PPC2_BCTAR_ISA207 |
+                        PPC2_LSQ_ISA207;
     pcc->msr_mask = 0x800000000284FF36ULL;
     pcc->mmu_model = POWERPC_MMU_2_06;
 #if defined(CONFIG_SOFTMMU)
Signature · 1 line
1.7.1
author
#5 lore raw

PATCH v3 5/9 target-ppc: Add is_user_mode Utility Routine

In reply to Tom Musta

This patch adds a boolean function is_user_mode that can be re-used in translation code that is sensitive to the MSR[PR] (user-mode) state.

---
 target-ppc/translate.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)
target-ppc/translate.c +14 -0
index b89b4ba..6ec4127 100644
@@ -622,6 +622,20 @@ static opc_handler_t invalid_handler = {
     .handler = gen_invalid,
 };
 
+#if defined(TARGET_PPC64)
+/* NOTE: as this time, the only use of is_user_mode() is in 64 bit code.  And */
+/*       so the function is wrapped in the standard 64-bit ifdef in order to  */
+/*       avoid compiler warnings in 32-bit implementations.                   */
+static bool is_user_mode(DisasContext *ctx)
+{
+#if defined(CONFIG_USER_ONLY)
+    return true;
+#else
+    return ctx->mem_idx == 0;
+#endif
+}
+#endif
+
 /***                           Integer comparison                          ***/
 
 static inline void gen_op_cmp(TCGv arg0, TCGv arg1, int s, int crf)
Signature · 1 line
1.7.1
author
#6 lore raw

PATCH v3 6/9 target-ppc: Load Quadword

In reply to Tom Musta

This patch adds the Book I (user space) Load Quadword (lq) instruction. This instruction was introduced into Book I in Power ISA V2.07. Previous versions of the architecture supported this as a privileged instruction. Previous versions of the architecture also did not support Little Endian mode.

Note that this patch also adds the PPC_64BX flag to the Power8 model, which enables the lq instruction.

---
V2: Refactored the user-mode and LE checks per Alex Graf's review.

V3: Moved declaration of local variables to the beginning of the block per Alex Graf's review.

 target-ppc/translate.c      |   36 ++++++++++++++++++++++--------------
 target-ppc/translate_init.c |    2 +-
 2 files changed, 23 insertions(+), 15 deletions(-)
target-ppc/translate.c +22 -14
index 6ec4127..1a323dc 100644
@@ -2872,36 +2872,44 @@ static void gen_ld(DisasContext *ctx)
 /* lq */
 static void gen_lq(DisasContext *ctx)
 {
-#if defined(CONFIG_USER_ONLY)
-    gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
-#else
     int ra, rd;
     TCGv EA;
 
-    /* Restore CPU state */
-    if (unlikely(ctx->mem_idx == 0)) {
+    /* lq is a legal user mode instruction starting in ISA 2.07 */
+    bool legal_in_user_mode = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+    bool le_is_supported = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+
+    if (!legal_in_user_mode && is_user_mode(ctx)) {
         gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
         return;
     }
+
+    if (!le_is_supported && ctx->le_mode) {
+        gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
+        return;
+    }
+
     ra = rA(ctx->opcode);
     rd = rD(ctx->opcode);
     if (unlikely((rd & 1) || rd == ra)) {
         gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
         return;
     }
-    if (unlikely(ctx->le_mode)) {
-        /* Little-endian mode is not handled */
-        gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
-        return;
-    }
+
     gen_set_access_type(ctx, ACCESS_INT);
     EA = tcg_temp_new();
     gen_addr_imm_index(ctx, EA, 0x0F);
-    gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
-    gen_addr_add(ctx, EA, EA, 8);
-    gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+
+    if (unlikely(ctx->le_mode)) {
+        gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+        gen_addr_add(ctx, EA, EA, 8);
+        gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+    } else {
+        gen_qemu_ld64(ctx, cpu_gpr[rd], EA);
+        gen_addr_add(ctx, EA, EA, 8);
+        gen_qemu_ld64(ctx, cpu_gpr[rd+1], EA);
+    }
     tcg_temp_free(EA);
-#endif
 }
 #endif
 
target-ppc/translate_init.c +1 -1
index 886238a..d7bcbba 100644
@@ -7333,7 +7333,7 @@ POWERPC_FAMILY(POWER8)(ObjectClass *oc, void *data)
                        PPC_CACHE | PPC_CACHE_ICBI | PPC_CACHE_DCBZ |
                        PPC_MEM_SYNC | PPC_MEM_EIEIO |
                        PPC_MEM_TLBIE | PPC_MEM_TLBSYNC |
-                       PPC_64B | PPC_ALTIVEC |
+                       PPC_64B | PPC_64BX | PPC_ALTIVEC |
                        PPC_SEGMENT_64B | PPC_SLBI |
                        PPC_POPCNTB | PPC_POPCNTWD;
     pcc->insns_flags2 = PPC2_VSX | PPC2_VSX207 | PPC2_DFP | PPC2_DBRX |
Signature · 1 line
1.7.1
author
#7 lore raw

PATCH v3 7/9 target-ppc: Store Quadword

In reply to Tom Musta

This patch adds support for the Store Quadword instruction in user mode. Prior to Power ISA 2.07, stq was legal only in privileged mode. Support for Little Endian mode is also new in ISA 2.07.

---
V2: Refactored user-mode and Little Endian checks per Alex Graf's review.

 target-ppc/translate.c |   39 +++++++++++++++++++++++----------------
 1 files changed, 23 insertions(+), 16 deletions(-)
target-ppc/translate.c +23 -16
index 1a323dc..f17117e 100644
@@ -2995,34 +2995,41 @@ static void gen_std(DisasContext *ctx)
     TCGv EA;
 
     rs = rS(ctx->opcode);
-    if ((ctx->opcode & 0x3) == 0x2) {
-#if defined(CONFIG_USER_ONLY)
-        gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
-#else
-        /* stq */
-        if (unlikely(ctx->mem_idx == 0)) {
+    if ((ctx->opcode & 0x3) == 0x2) { /* stq */
+
+        bool legal_in_user_mode = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+        bool le_is_supported = (ctx->insns_flags2 & PPC2_LSQ_ISA207) != 0;
+
+        if (!legal_in_user_mode && is_user_mode(ctx)) {
             gen_inval_exception(ctx, POWERPC_EXCP_PRIV_OPC);
             return;
         }
-        if (unlikely(rs & 1)) {
-            gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
+
+        if (!le_is_supported && ctx->le_mode) {
+            gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
             return;
         }
-        if (unlikely(ctx->le_mode)) {
-            /* Little-endian mode is not handled */
-            gen_exception_err(ctx, POWERPC_EXCP_ALIGN, POWERPC_EXCP_ALIGN_LE);
+
+        if (unlikely(rs & 1)) {
+            gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
             return;
         }
         gen_set_access_type(ctx, ACCESS_INT);
         EA = tcg_temp_new();
         gen_addr_imm_index(ctx, EA, 0x03);
-        gen_qemu_st64(ctx, cpu_gpr[rs], EA);
-        gen_addr_add(ctx, EA, EA, 8);
-        gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+
+        if (unlikely(ctx->le_mode)) {
+            gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+            gen_addr_add(ctx, EA, EA, 8);
+            gen_qemu_st64(ctx, cpu_gpr[rs], EA);
+        } else {
+            gen_qemu_st64(ctx, cpu_gpr[rs], EA);
+            gen_addr_add(ctx, EA, EA, 8);
+            gen_qemu_st64(ctx, cpu_gpr[rs+1], EA);
+        }
         tcg_temp_free(EA);
-#endif
     } else {
-        /* std / stdu */
+        /* std / stdu*/
         if (Rc(ctx->opcode)) {
             if (unlikely(rA(ctx->opcode) == 0)) {
                 gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
Signature · 1 line
1.7.1
author
#8 lore raw

PATCH v3 8/9 target-ppc: Add Load Quadword and Reserve

In reply to Tom Musta

This patch adds the Load Quadword and Reserve (lqarx) instruction, which is new in Power ISA 2.07.

---
V2: Additional changes for handling reserve_val2.
V3: Fixed bug in storing reserve_val2.

 target-ppc/cpu.h       |    1 +
 target-ppc/translate.c |   37 +++++++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 0 deletions(-)
target-ppc/cpu.h +1 -0
index b66dd44..214afd9 100644
@@ -926,6 +926,7 @@ struct CPUPPCState {
     target_ulong reserve_addr;
     /* Reservation value */
     target_ulong reserve_val;
+    target_ulong reserve_val2;
     /* Reservation store address */
     target_ulong reserve_ea;
     /* Reserved store source register and size */
target-ppc/translate.c +37 -0
index f17117e..77de07a 100644
@@ -3359,6 +3359,42 @@ STCX(stwcx_, 4);
 /* ldarx */
 LARX(ldarx, 8, ld64);
 
+/* lqarx */
+static void gen_lqarx(DisasContext *ctx)
+{
+    TCGv EA;
+    int rd = rD(ctx->opcode);
+    TCGv gpr1, gpr2;
+
+    if (unlikely((rd & 1) || (rd == rA(ctx->opcode)) ||
+                 (rd == rB(ctx->opcode)))) {
+        gen_inval_exception(ctx, POWERPC_EXCP_INVAL_INVAL);
+        return;
+    }
+
+    gen_set_access_type(ctx, ACCESS_RES);
+    EA = tcg_temp_local_new();
+    gen_addr_reg_index(ctx, EA);
+    gen_check_align(ctx, EA, 15);
+    if (unlikely(ctx->le_mode)) {
+        gpr1 = cpu_gpr[rd+1];
+        gpr2 = cpu_gpr[rd];
+    } else {
+        gpr1 = cpu_gpr[rd];
+        gpr2 = cpu_gpr[rd+1];
+    }
+    gen_qemu_ld64(ctx, gpr1, EA);
+    tcg_gen_mov_tl(cpu_reserve, EA);
+
+    gen_addr_add(ctx, EA, EA, 8);
+    gen_qemu_ld64(ctx, gpr2, EA);
+
+    tcg_gen_st_tl(gpr1, cpu_env, offsetof(CPUPPCState, reserve_val));
+    tcg_gen_st_tl(gpr2, cpu_env, offsetof(CPUPPCState, reserve_val2));
+
+    tcg_temp_free(EA);
+}
+
 /* stdcx. */
 STCX(stdcx_, 8);
 #endif /* defined(TARGET_PPC64) */
@@ -9598,6 +9634,7 @@ GEN_HANDLER_E(sthcx_, 0x1F, 0x16, 0x16, 0, PPC_NONE, PPC2_ATOMIC_ISA206),
 GEN_HANDLER2(stwcx_, "stwcx.", 0x1F, 0x16, 0x04, 0x00000000, PPC_RES),
 #if defined(TARGET_PPC64)
 GEN_HANDLER(ldarx, 0x1F, 0x14, 0x02, 0x00000000, PPC_64B),
+GEN_HANDLER_E(lqarx, 0x1F, 0x14, 0x08, 0, PPC_NONE, PPC2_LSQ_ISA207),
 GEN_HANDLER2(stdcx_, "stdcx.", 0x1F, 0x16, 0x06, 0x00000000, PPC_64B),
 #endif
 GEN_HANDLER(sync, 0x1F, 0x16, 0x12, 0x039FF801, PPC_MEM_SYNC),
Signature · 1 line
1.7.1
author
#9 lore raw

PATCH v3 9/9 target-ppc: Add Store Quadword Conditional

In reply to Tom Musta

This patch adds the Store Quadword Conditionl (stqcx.) instruction which is introduced in Power ISA 2.07.

---
V2: Updated linux-user/main.c to use the newly added reserve_val2.

V3: Fixed erroneousl val2 check per Alex Graf's review.

 linux-user/main.c      |   18 +++++++++++++++++-
 target-ppc/translate.c |   21 +++++++++++++++++++++
 2 files changed, 38 insertions(+), 1 deletions(-)
linux-user/main.c +17 -1
index cabc9e1..0cca37d 100644
@@ -1490,7 +1490,7 @@ static int do_store_exclusive(CPUPPCState *env)
 {
     target_ulong addr;
     target_ulong page_addr;
-    target_ulong val;
+    target_ulong val, val2;
     int flags;
     int segv = 0;
 
@@ -1513,6 +1513,13 @@ static int do_store_exclusive(CPUPPCState *env)
             case 4: segv = get_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
             case 8: segv = get_user_u64(val, addr); break;
+            case 16: {
+                segv = get_user_u64(val, addr);
+                if (!segv) {
+                    segv = get_user_u64(val2, addr + 8);
+                }
+                break;
+            }
 #endif
             default: abort();
             }
@@ -1524,6 +1531,15 @@ static int do_store_exclusive(CPUPPCState *env)
                 case 4: segv = put_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
                 case 8: segv = put_user_u64(val, addr); break;
+                case 16: {
+                    if (val2 == env->reserve_val2) {
+                        segv = put_user_u64(val, addr);
+                        if (!segv) {
+                            segv = put_user_u64(val2, addr + 8);
+                        }
+                    }
+                    break;
+                }
 #endif
                 default: abort();
                 }
target-ppc/translate.c +21 -0
index 77de07a..cf0ebc7 100644
@@ -3329,6 +3329,20 @@ static void gen_conditional_store(DisasContext *ctx, TCGv EA,
         gen_qemu_st32(ctx, cpu_gpr[reg], EA);
     } else if (size == 2) {
         gen_qemu_st16(ctx, cpu_gpr[reg], EA);
+#if defined(TARGET_PPC64)
+    } else if (size == 16) {
+        TCGv gpr1, gpr2;
+        if (unlikely(ctx->le_mode)) {
+            gpr1 = cpu_gpr[reg+1];
+            gpr2 = cpu_gpr[reg];
+        } else {
+            gpr1 = cpu_gpr[reg];
+            gpr2 = cpu_gpr[reg+1];
+        }
+        gen_qemu_st64(ctx, gpr1, EA);
+        gen_addr_add(ctx, EA, EA, 8);
+        gen_qemu_st64(ctx, gpr2, EA);
+#endif
     } else {
         gen_qemu_st8(ctx, cpu_gpr[reg], EA);
     }
@@ -3341,6 +3355,11 @@ static void gen_conditional_store(DisasContext *ctx, TCGv EA,
 static void gen_##name(DisasContext *ctx)                 \
 {                                                         \
     TCGv t0;                                              \
+    if (unlikely((len == 16) && (rD(ctx->opcode) & 1))) { \
+        gen_inval_exception(ctx,                          \
+                            POWERPC_EXCP_INVAL_INVAL);    \
+        return;                                           \
+    }                                                     \
     gen_set_access_type(ctx, ACCESS_RES);                 \
     t0 = tcg_temp_local_new();                            \
     gen_addr_reg_index(ctx, t0);                          \
@@ -3397,6 +3416,7 @@ static void gen_lqarx(DisasContext *ctx)
 
 /* stdcx. */
 STCX(stdcx_, 8);
+STCX(stqcx_, 16);
 #endif /* defined(TARGET_PPC64) */
 
 /* sync */
@@ -9636,6 +9656,7 @@ GEN_HANDLER2(stwcx_, "stwcx.", 0x1F, 0x16, 0x04, 0x00000000, PPC_RES),
 GEN_HANDLER(ldarx, 0x1F, 0x14, 0x02, 0x00000000, PPC_64B),
 GEN_HANDLER_E(lqarx, 0x1F, 0x14, 0x08, 0, PPC_NONE, PPC2_LSQ_ISA207),
 GEN_HANDLER2(stdcx_, "stdcx.", 0x1F, 0x16, 0x06, 0x00000000, PPC_64B),
+GEN_HANDLER_E(stqcx_, 0x1F, 0x16, 0x05, 0, PPC_NONE, PPC2_LSQ_ISA207),
 #endif
 GEN_HANDLER(sync, 0x1F, 0x16, 0x12, 0x039FF801, PPC_MEM_SYNC),
 GEN_HANDLER(wait, 0x1F, 0x1E, 0x01, 0x03FFF801, PPC_WAIT),
Signature · 1 line
1.7.1
#10 lore raw

Re: [Qemu-devel] [Qemu-ppc] [V3 PATCH 9/9] target-ppc: Add Store Quadword Conditional

Quoted 66 lines · Tom Musta

This patch adds the Store Quadword Conditionl (stqcx.) instruction which is introduced in Power ISA 2.07.

---
V2: Updated linux-user/main.c to use the newly added reserve_val2.

V3: Fixed erroneousl val2 check per Alex Graf's review.

linux-user/main.c      |   18 +++++++++++++++++-
target-ppc/translate.c |   21 +++++++++++++++++++++
2 files changed, 38 insertions(+), 1 deletions(-)
linux-user/main.c +17 -1
index cabc9e1..0cca37d 100644
@@ -1490,7 +1490,7 @@ static int do_store_exclusive(CPUPPCState *env)
 {
    target_ulong addr;
    target_ulong page_addr;
-    target_ulong val;
+    target_ulong val, val2;
    int flags;
    int segv = 0;
 
@@ -1513,6 +1513,13 @@ static int do_store_exclusive(CPUPPCState *env)
            case 4: segv = get_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
            case 8: segv = get_user_u64(val, addr); break;
+            case 16: {
+                segv = get_user_u64(val, addr);
+                if (!segv) {
+                    segv = get_user_u64(val2, addr + 8);
+                }
+                break;
+            }
 #endif
            default: abort();
            }
@@ -1524,6 +1531,15 @@ static int do_store_exclusive(CPUPPCState *env)
                case 4: segv = put_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
                case 8: segv = put_user_u64(val, addr); break;
+                case 16: {
+                    if (val2 == env->reserve_val2) {
+                        segv = put_user_u64(val, addr);
+                        if (!segv) {
+                            segv = put_user_u64(val2, addr + 8);
+                        }
+                    }
+                    break;
+                }
 #endif
                default: abort();
                }
target-ppc/translate.c +2 -0
index 77de07a..cf0ebc7 100644
@@ -3329,6 +3329,20 @@ static void gen_conditional_store(DisasContext *ctx, TCGv EA,
        gen_qemu_st32(ctx, cpu_gpr[reg], EA);
    } else if (size == 2) {
        gen_qemu_st16(ctx, cpu_gpr[reg], EA);
+#if defined(TARGET_PPC64)
+    } else if (size == 16) {

target-ppc/translate.c static void gen_conditional_store(DisasContext *ctx, TCGv EA, · line 3343

Quoted 10 lines
target-ppc/translate.c +10 -0
+        TCGv gpr1, gpr2;
+        if (unlikely(ctx->le_mode)) {
+            gpr1 = cpu_gpr[reg+1];
+            gpr2 = cpu_gpr[reg];
+        } else {
+            gpr1 = cpu_gpr[reg];
+            gpr2 = cpu_gpr[reg+1];
+        }
+        gen_qemu_st64(ctx, gpr1, EA);
+        gen_addr_add(ctx, EA, EA, 8);

Please send a follow-up patch on top of this one that creates a temporary in this case for EA+8. It's pretty counterintuitive to have an input variable come out with a different value out of a function.

Alex

#11 lore raw

Re: [Qemu-devel] [Qemu-ppc] [V3 PATCH 9/9] target-ppc: Add Store Quadword Conditional

Quoted 73 lines · Alexander Graf
Quoted 70 lines · Tom Musta

This patch adds the Store Quadword Conditionl (stqcx.) instruction which is introduced in Power ISA 2.07.

---
V2: Updated linux-user/main.c to use the newly added reserve_val2.

V3: Fixed erroneousl val2 check per Alex Graf's review.

linux-user/main.c      |   18 +++++++++++++++++-
target-ppc/translate.c |   21 +++++++++++++++++++++
2 files changed, 38 insertions(+), 1 deletions(-)
linux-user/main.c +17 -1
index cabc9e1..0cca37d 100644
@@ -1490,7 +1490,7 @@ static int do_store_exclusive(CPUPPCState *env)
 {
   target_ulong addr;
   target_ulong page_addr;
-    target_ulong val;
+    target_ulong val, val2;
   int flags;
   int segv = 0;
 
@@ -1513,6 +1513,13 @@ static int do_store_exclusive(CPUPPCState *env)
           case 4: segv = get_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
           case 8: segv = get_user_u64(val, addr); break;
+            case 16: {
+                segv = get_user_u64(val, addr);
+                if (!segv) {
+                    segv = get_user_u64(val2, addr + 8);
+                }
+                break;
+            }
 #endif
           default: abort();
           }
@@ -1524,6 +1531,15 @@ static int do_store_exclusive(CPUPPCState *env)
               case 4: segv = put_user_u32(val, addr); break;
 #if defined(TARGET_PPC64)
               case 8: segv = put_user_u64(val, addr); break;
+                case 16: {
+                    if (val2 == env->reserve_val2) {
+                        segv = put_user_u64(val, addr);
+                        if (!segv) {
+                            segv = put_user_u64(val2, addr + 8);
+                        }
+                    }
+                    break;
+                }
 #endif
               default: abort();
               }
target-ppc/translate.c +6 -0
index 77de07a..cf0ebc7 100644
@@ -3329,6 +3329,20 @@ static void gen_conditional_store(DisasContext *ctx, TCGv EA,
       gen_qemu_st32(ctx, cpu_gpr[reg], EA);
   } else if (size == 2) {
       gen_qemu_st16(ctx, cpu_gpr[reg], EA);
+#if defined(TARGET_PPC64)
+    } else if (size == 16) {
+        TCGv gpr1, gpr2;
+        if (unlikely(ctx->le_mode)) {
+            gpr1 = cpu_gpr[reg+1];
+            gpr2 = cpu_gpr[reg];
Quoted 8 lines

target-ppc/translate.c static void gen_conditional_store(DisasContext *ctx, TCGv EA, · line 3343

Quoted 6 lines
target-ppc/translate.c +6 -0
+        } else {
+            gpr1 = cpu_gpr[reg];
+            gpr2 = cpu_gpr[reg+1];
+        }
+        gen_qemu_st64(ctx, gpr1, EA);
+        gen_addr_add(ctx, EA, EA, 8);

Please send a follow-up patch on top of this one that creates a temporary in this case for EA+8. It's pretty counterintuitive to have an input variable come out with a different value out of a function.

I've also folded in this patch while applying it to make things compile with --target-list=ppc-linux-user.

Alex

linux-user/main.c +1 -1
index 0cca37d..8aa8a3a 100644
@@ -1490,7 +1490,7 @@ static int do_store_exclusive(CPUPPCState *env)
 {
     target_ulong addr;
     target_ulong page_addr;
-    target_ulong val, val2;
+    target_ulong val, val2 __attribute__((unused));
     int flags;
     int segv = 0;
#12 lore raw
In reply to Tom Musta
Quoted 17 lines · Tom Musta

This patch series adds the branch and integer instructions that were introduced in Power ISA 2.07. Specifically,

- There is a new conditional Branch to Address Register (bctar) instruction.
- The load/store quadword instructions are now supported in user mode (Book I).
- Quadword atomic instructions have been added (lqarx, stqcx.).

ISA 2.07 additions for other categories (VSX, Altivec, Decimal Floating Point, transactional memory) are not included in this patch series; they will be contributed via other patches.

V2: Addressing review comments from Alex Graf:
(1) Refactored user-mode and Little Endian checks in the load and store quadword instructions.
(2) Added reserve_val2 element to CPU state in support of quadword atomic instructions.

Quoted 5 lines

V3: Addressiew review comments from Alex Graf:
(1) Moved declaration of local variables to the beginning of the block (a la

       C89 standard).

(2) Fixed bugs in handling of secondary reservation doubleword used in lqarx and stqcx. instructions.

Thanks, applied to ppc-next.

Alex