ARM: spear: Remove references to PLAT_SPEAR_SINGLE
PATCH 1/1 ARM: spear: Remove references to PLAT_SPEAR_SINGLE
The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.
---
Untested.
arch/arm/mach-spear/Kconfig | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
arch/arm/mach-spear/Kconfig +3 -5
@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO
@@ -15,7 +14,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARM_GIC select CPU_V7
@@ -47,7 +46,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select CPU_ARM926T
@@ -80,7 +79,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select CPU_ARM926T
@@ -95,7 +94,6 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig" config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XX
Signature · 1 line
1.8.5.3
I got a bounce for Shiraz' address. Has Shiraz left ST?
Paul Bolle
PATCH v2 1/1 ARM: spear: Remove references to PLAT_SPEAR_SINGLE
In reply to Paul BolleThe Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.
---
0) First version was broken: it left config ARCH_SPEAR_AUTO without its bool type. This version is done on top of v3.15-rc1.
1) Still untested.
arch/arm/mach-spear/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
arch/arm/mach-spear/Kconfig +4 -5
@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS
@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL
@@ -72,7 +71,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help
@@ -85,7 +84,7 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-tree config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XX
Signature · 1 line
1.9.0
Quoted 58 lines · Paul Bolle
The
KconfigsymbolPLAT_SPEAR_SINGLEbriefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.Reported-by Martin Walch <[email protected]>Signed-off-by Paul Bolle <[email protected]>---
0) First version was broken: it left configARCH_SPEAR_AUTOwithout its bool type. This version is done on top of v3.15-rc1.1) Still untested.
arch/arm/mach-spear/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)arch/arm/mach-spear/Kconfig +3
-4@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO@@ -13,7 +12,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL@@ -72,7 +71,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help
arch/arm/mach-spear/Kconfig config MACH_SPEAR600 · line 90
Quoted 8 lines
arch/arm/mach-spear/Kconfig +1
-1@@ -85,7 +84,7 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-tree config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XX
Quoted 60 lines · Rajeev kumar
Quoted 59 lines · Paul Bolle
The
KconfigsymbolPLAT_SPEAR_SINGLEbriefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.Reported-by Martin Walch <[email protected]>Signed-off-by Paul Bolle <[email protected]>---
0) First version was broken: it left configARCH_SPEAR_AUTOwithout its bool type. This version is done on top of v3.15-rc1.1) Still untested.
arch/arm/mach-spear/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)arch/arm/mach-spear/Kconfig +3
-4@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO@@ -13,7 +12,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL@@ -72,7 +71,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help@@ -85,7 +84,7 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-tree
Quoted 10 lines
arch/arm/mach-spear/Kconfig config MACH_SPEAR600 · line 90
Quoted 7 lines
arch/arm/mach-spear/Kconfig +1
-1config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XXReviewed-by Rajeev Kumar <[email protected]>
Thanks!
This can still be seen in v3.16-rc1 and in today's linux-next (ie, next-20140616). Is this trivial patch queued somewhere?
Paul Bolle
Quoted 72 lines · Paul Bolle
Quoted 60 lines · Rajeev kumar
Quoted 59 lines · Paul Bolle
The
KconfigsymbolPLAT_SPEAR_SINGLEbriefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.Reported-by Martin Walch <[email protected]>Signed-off-by Paul Bolle <[email protected]>---
0) First version was broken: it left configARCH_SPEAR_AUTOwithout its bool type. This version is done on top of v3.15-rc1.1) Still untested.
arch/arm/mach-spear/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)arch/arm/mach-spear/Kconfig +3
-4@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO@@ -13,7 +12,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARM_GIC select GPIO_SPEAR_SPICS@@ -41,7 +40,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL@@ -72,7 +71,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help@@ -85,7 +84,7 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-treeQuoted 10 lines
arch/arm/mach-spear/Kconfig config MACH_SPEAR600 · line 90
Quoted 7 lines
arch/arm/mach-spear/Kconfig +1
-1config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XXReviewed-by Rajeev Kumar <[email protected]>
Quoted 4 lines
Thanks!
This can still be seen in v3.16-rc1 and in today's linux-next (ie, next-20140616). Is this trivial patch queued somewhere?
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
Paul Bolle
Quoted 10 lines · Paul Bolle
Quoted 7 lines · Paul Bolle
Quoted 1 line · Rajeev kumar
Reviewed-by Rajeev Kumar <[email protected]>Thanks!
This can still be seen in v3.16-rc1 and in today's linux-next (ie, next-20140616). Is this trivial patch queued somewhere?
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
And now Rajeev's address bounces. Has Rajeev left ST?
Paul Bolle
Viresh Kumar
Acked-byQuoted 1 line · Paul Bolle
Quoted 1 line
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
You need to send it to arm at kernel.org..
Quoted 1 line
And now Rajeev's address bounces. Has Rajeev left ST?
Yeah both Shiraz/Rajeev and myself have left ST :)
You can add
--
viresh
Viresh,
Quoted 4 lines · Viresh Kumar
Quoted 1 line · Paul Bolle
Quoted 1 line
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
You need to send it to arm at kernel.org..
Will do, no problem. But why actually? (Note that MAINTAINERS is silent on arm at kernel.org. Maybe that address is documented elsewhere.)
Quoted 3 lines
Quoted 1 line
And now Rajeev's address bounces. Has Rajeev left ST?
Yeah both Shiraz/Rajeev and myself have left ST :)
I see. Is there a current address for Rajeev.? I will not keep an Acked-by on a bouncing address.
Quoted 2 lines
You can add
Acked-by Viresh Kumar <[email protected]>
Thanks,
Paul Bolle
Quoted 8 lines · Paul Bolle
Quoted 4 lines · Viresh Kumar
Quoted 1 line · Paul Bolle
Quoted 1 line
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
You need to send it to arm at kernel.org..
Will do, no problem. But why actually? (Note that
MAINTAINERSis silent on arm at kernel.org. Maybe that address is documented elsewhere.)
Don't know where it is documented.
@Arnd: ??
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
And now Rajeev's address bounces. Has Rajeev left ST?
Yeah both Shiraz/Rajeev and myself have left ST :)
I see. Is there a current address for Rajeev.? I will not keep an Acked-by on a bouncing address.
rajivrec at gmail.com
Quoted 4 lines
Quoted 2 lines
You can add
Acked-by Viresh Kumar <[email protected]>Thanks,
Welcome !!
Quoted 5 lines · On Friday 05 September 2014 15:24:31 Viresh Kumar wrote:
Quoted 4 lines · Paul Bolle
Quoted 3 lines · Viresh Kumar
Quoted 1 line · Paul Bolle
Quoted 1 line
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this up?
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
You need to send it to arm at kernel.org..
Will do, no problem. But why actually? (Note that
MAINTAINERSis silent on arm at kernel.org. Maybe that address is documented elsewhere.)Don't know where it is documented.
@Arnd: ??
We have avoided documenting it so far, to avoid getting spammed with trivial patches that should get picked up by the subarch maintainers instead.
I've applied this patch to the next/fixes-non-critical branch now, with minor fixup for a conflict that has come in. See below for the final version.
Arnd
---
commit 3b0b8ec99aadea710f3dece74c95523463c0087a
Author: Paul Bolle <[email protected]> Date: Tue Apr 15 10:26:47 2014 +0200
ARM: spear: Remove references to PLAT_SPEAR_SINGLE
The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed.
arch/arm/mach-spear/Kconfig +4 -5
@@ -4,7 +4,6 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5 - default PLAT_SPEAR_SINGLE select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO
@@ -13,7 +12,7 @@ if PLAT_SPEAR config ARCH_SPEAR13XX bool "ST SPEAr13xx" - depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V7 select ARM_GIC select GPIO_SPEAR_SPICS select HAVE_ARM_SCU if SMP
@@ -44,7 +43,7 @@ endif #ARCH_SPEAR13XX config ARCH_SPEAR3XX bool "ST SPEAr3xx" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC select PINCTRL
@@ -75,7 +74,7 @@ endif config ARCH_SPEAR6XX bool "ST SPEAr6XX" - depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE + depends on ARCH_MULTI_V5 depends on !ARCH_SPEAR13XX select ARM_VIC help
@@ -88,7 +87,7 @@ config MACH_SPEAR600 Supports ST SPEAr600 boards configured via the device-tree config ARCH_SPEAR_AUTO - def_bool PLAT_SPEAR_SINGLE + bool depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX select ARCH_SPEAR3XX
Quoted 2 lines · Arnd Bergmann
I've applied this patch to the next/fixes-non-critical branch now, with minor fixup for a conflict that has come in. See below for the final version.
Thanks for picking this up!
Paul Bolle
Quoted 19 lines
-----Original Message-----
From: linux-arm-kernel [mailto:linux-arm-kernel- bounces at lists.infradead.org] On Behalf Of Paul Bolle
Sent: Friday, September 05, 2014 3:09 PM
To: Viresh Kumar; Shiraz Hashim
Cc: Russell King; Richard Weinberger; Martin Walch; spear- devel at list.st.com; linux-kernel at vger.kernel.org; linux-arm- kernel at lists.infradead.org
Subject: Re: [PATCH v2] ARM: spear: Remove references toPLAT_SPEAR_SINGLEQuoted 6 lines · Paul Bolle
Quoted 5 lines · Paul Bolle
Quoted 1 line · Rajeev kumar
Reviewed-by Rajeev Kumar <[email protected]>Thanks!
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
This can still be seen in v3.16-rc1 and in today's linux-next (ie, next-20140616). Is this trivial patch queued somewhere?
Ditto for v3.17-rc3 and next-20140904. Could someone please pix this
up?
And now Rajeev's address bounces. Has Rajeev left ST?
Copying Rajeev' new id.
Regards,
Bhupesh
Quoted 7 lines
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel