hwmon: (emc2103) Return error from i2c_smbus_read_byte_data
Subsystems (2)
Guenter Roeck
maintainerPATCH 1/2 hwmon: (emc2103) Return error from i2c_smbus_read_byte_data
There is no reason to replace one error with another.
smatch message:drivers/hwmon/emc2103.c:352 set_fan_div() info: why not propagate 'status' from i2c_smbus_read_byte_data() instead of (-5)?
--- drivers/hwmon/emc2103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/emc2103.c +1 -1
@@ -349,7 +349,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,dev_dbg (&client->dev,"reg 0x%02x, err %d\n" ,REG_FAN_CONF1 , status);mutex_unlock (&data->update_lock); -return -EIO ; +return status; } status &=0x9F ; status |= (new_range_bits <<5 );
Signature · 7 lines
1.7.9.7 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 16 lines · Guenter Roeck
There is no reason to replace one error with another.
smatch message:
drivers/hwmon/emc2103.c:352set_fan_div()info: why not propagate 'status' fromi2c_smbus_read_byte_data()instead of (-5)?Signed-off-by Guenter Roeck <[email protected]>--- drivers/hwmon/emc2103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/hwmon/emc2103.c +0
-0
drivers/hwmon/emc2103.c static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, · line 355
Quoted 8 lines
drivers/hwmon/emc2103.c +1
-1@@ -349,7 +349,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,dev_dbg (&client->dev,"reg 0x%02x, err %d\n" ,REG_FAN_CONF1 , status);mutex_unlock (&data->update_lock); -return -EIO ; +return status; } status &=0x9F ; status |= (new_range_bits <<5 );
Good catch.
Signature · 7 lines
Jean Delvare Suse L3 Support _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Guenter Roeck
maintainerQuoted 12 lines · Jean Delvare
Quoted 11 lines · Guenter Roeck
There is no reason to replace one error with another.
smatch message:
drivers/hwmon/emc2103.c:352set_fan_div()info: why not propagate 'status' fromi2c_smbus_read_byte_data()instead of (-5)?Signed-off-by Guenter Roeck <[email protected]>--- drivers/hwmon/emc2103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 16 lines
drivers/hwmon/emc2103.c static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, · line 355
Quoted 13 lines
drivers/hwmon/emc2103.c +1
-1@@ -349,7 +349,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,dev_dbg (&client->dev,"reg 0x%02x, err %d\n" ,REG_FAN_CONF1 , status);mutex_unlock (&data->update_lock); -return -EIO ; +return status; } status &=0x9F ; status |= (new_range_bits <<5 );Good catch.
Hi Jean.
Easy with an auto-builder ...
This is the current list of problems reported by smatch.
drivers/hwmon/lm90.c:1204 lm90_detect() info: why not propagate 'config2' from i2c_smbus_read_byte_data() instead of (-19)? drivers/hwmon/w83627hf.c:1857 w83627hf_update_device() error: buffer overflow 'regpwm_627hf' 2 <= 2 drivers/hwmon/f71882fg.c:2374 f71882fg_probe() warn: missing break? reassigning 'data->auto_point_temp_signed' drivers/hwmon/max1668.c:386 max1668_detect() info: why not propagate 'dev_id' from i2c_smbus_read_byte_data() instead of (-19)? drivers/hwmon/tmp401.c:214 tmp401_update_device_reg16() error: buffer overflow 'TMP432_TEMP_MSB_READ' 4 <= 5 drivers/hwmon/tmp401.c:215 tmp401_update_device_reg16() error: buffer overflow 'TMP401_TEMP_MSB_READ[j]' 2 <= 2 drivers/hwmon/tmp401.c:222 tmp401_update_device_reg16() error: buffer overflow 'TMP432_TEMP_LSB' 3 <= 5 drivers/hwmon/tmp401.c:223 tmp401_update_device_reg16() error: buffer overflow 'TMP401_TEMP_LSB[j]' 2 <= 2 drivers/hwmon/w83791d.c:996 store_temp23() warn: '32768' 32768 can't fit into 32767 'data->temp_add[nr][index]' drivers/hwmon/lm63.c:594 set_temp11() warn: '65504' 65504 can't fit into 32767 'data->temp11[nr]' drivers/hwmon/lm63.c:596 set_temp11() warn: '32768' 32768 can't fit into 32767 'data->temp11[nr]'
All false positives as far as I can see, but except for the detect functions, it points to less than perfect code. No idea how to make it better without making the code more complicated, though. Just in case you have too much time and want to have a look :-)
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors