ARM: OMAP5: Fix reboot handling
Subsystems (4)
PATCH 1/1 ARM: OMAP5: Fix reboot handling
Use the correct register offset for issuing the reset command in OMAP5. Since dev_inst is set dynamically OMAP4 should not be affected by this change.
---
Applies on top of v3.14-rc3
arch/arm/mach-omap2/prminst44xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/prminst44xx.c +2 -2
@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void) OMAP4_PRM_RSTCTRL_OFFSET); v |=OMAP4430_RST_GLOBAL_WARM_SW_MASK ;omap4_prminst_write_inst_reg (v,OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET );/* OCP barrier */ v =omap4_prminst_read_inst_reg (OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET ); }
Signature · 1 line
1.8.1.2
PATCH 1/1 ARM: OMAP5: Fix reboot handling
Hi Vaibhav,
Quoted 3 lines · Vaibhav Bedia
Use the correct register offset for issuing the reset command in OMAP5. Since
dev_instis set dynamically OMAP4 should not be affected by this change.
Thanks for the patch. This fixes reboot on OMAP5 and DRA7 also..:)
Thanks and regards,
Lokesh
Quoted 27 lines
Signed-off-by Vaibhav Bedia <[email protected]>---
Applies on top of v3.14-rc3arch/arm/mach-omap2/prminst44xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/mach-omap2/prminst44xx.c +2
-2@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void) OMAP4_PRM_RSTCTRL_OFFSET); v |=OMAP4430_RST_GLOBAL_WARM_SW_MASK ;omap4_prminst_write_inst_reg (v,OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET );/* OCP barrier */ v =omap4_prminst_read_inst_reg (OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET ); }
PATCH 1/1 ARM: OMAP5: Fix reboot handling
In reply to Vaibhav BediaQuoted 5 lines · Vaibhav Bedia
Use the correct register offset for issuing the reset command in OMAP5. Since
dev_instis set dynamically OMAP4 should not be affected by this change.Signed-off-by Vaibhav Bedia <[email protected]>
Quoted 25 lines
---
Applies on top of v3.14-rc3arch/arm/mach-omap2/prminst44xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/mach-omap2/prminst44xx.c +2
-2@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void) OMAP4_PRM_RSTCTRL_OFFSET); v |=OMAP4430_RST_GLOBAL_WARM_SW_MASK ;omap4_prminst_write_inst_reg (v,OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET );/* OCP barrier */ v =omap4_prminst_read_inst_reg (OMAP4430_PRM_PARTITION , -OMAP4430_PRM_DEVICE_INST , + dev_inst,OMAP4_PRM_RSTCTRL_OFFSET ); }
Paul Walmsley
maintainerPATCH 1/1 ARM: OMAP5: Fix reboot handling
In reply to Vaibhav BediaQuoted 5 lines · Vaibhav Bedia
Use the correct register offset for issuing the reset command in OMAP5. Since
dev_instis set dynamically OMAP4 should not be affected by this change.Signed-off-by Vaibhav Bedia <[email protected]>
Thanks, queued for v3.14-rc with Lokesh's Tested-by:.
- Paul
Paul Walmsley
maintainerPATCH 1/1 ARM: OMAP5: Fix reboot handling
Quoted 9 lines · Paul Walmsley
Quoted 5 lines · Vaibhav Bedia
Use the correct register offset for issuing the reset command in OMAP5. Since
dev_instis set dynamically OMAP4 should not be affected by this change.Signed-off-by Vaibhav Bedia <[email protected]>Thanks, queued for v3.14-rc with Lokesh's Tested-by:.
(and Rajendra's ack also)
- Paul