treewide: Fix typo in Documentation/DocBook
Subsystems (19)
PATCH 1/1 treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files.
Signed-off-by Masanari Iida <[email protected]>
--- arch/s390/include/asm/cio.h | 2 +- block/blk-core.c | 2 +- block/blk-map.c | 2 +- drivers/ata/libata-core.c | 4 ++-- drivers/base/bus.c | 2 +- drivers/gpu/drm/drm_crtc_helper.c | 2 +- drivers/input/sparse-keymap.c | 2 +- drivers/regulator/core.c | 2 +- drivers/scsi/scsi_transport_iscsi.c | 6 +++--- drivers/usb/core/message.c | 2 +- drivers/usb/core/urb.c | 2 +- fs/buffer.c | 2 +- fs/debugfs/inode.c | 6 +++--- include/drm/drm_fb_helper.h | 2 +- include/linux/hsi/hsi.h | 2 +- include/linux/i2c.h | 2 +- include/linux/kfifo.h | 2 +- include/linux/pipe_fs_i.h | 2 +- include/linux/skbuff.h | 2 +- include/linux/spi/spi.h | 8 ++++---- include/linux/usb/composite.h | 2 +- include/linux/usb/gadget.h | 2 +- include/net/mac80211.h | 6 +++--- ipc/util.c | 6 +++--- kernel/relay.c | 2 +- kernel/signal.c | 2 +- net/core/dev.c | 2 +- 27 files changed, 39 insertions(+), 39 deletions(-)
arch/s390/include/asm/cio.h +1 -1
@@ -199,7 +199,7 @@ struct esw_eadm {/** * struct irb - interruption response block * @scsw: subchannel status word -* @esw: extened status word +* @esw: extended status word * @ecw: extended control word * * The irb that is handed to the device driver when an interrupt occurs. For
block/blk-core.c +1 -1
@@ -1915,7 +1915,7 @@ EXPORT_SYMBOL(submit_bio);* in some cases below, so export this function. * Request stacking drivers like request-based dm may change the queue * limits while requests are in the queue (e.g. dm's table swapping). -* Such request stacking drivers should check those requests agaist +* Such request stacking drivers should check those requests against * the new queue limits again when they dispatch those requests, * although such checkings are also done against the old queue limits * when submitting requests.
block/blk-map.c +1 -1
@@ -285,7 +285,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user);* * Description: * Data will be mapped directly if possible. Otherwise a bounce -* buffer is used. Can be called multple times to append multple +* buffer is used. Can be called multiple times to append multiple * buffers. */ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
drivers/ata/libata-core.c +2 -2
@@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)* @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command -* @dma_dir: Data tranfer direction of the command +* @dma_dir: Data transfer direction of the command * @sgl: sg list for the data buffer of the command * @n_elem: Number of sg entries * @timeout: Timeout in msecs (0 for default)
@@ -1712,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,* @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command -* @dma_dir: Data tranfer direction of the command +* @dma_dir: Data transfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer * @timeout: Timeout in msecs (0 for default)
drivers/base/bus.c +1 -1
@@ -1218,7 +1218,7 @@ err_dev:* with the name of the subsystem. The root device can carry subsystem- * wide attributes. All registered devices are below this single root * device and are named after the subsystem with a simple enumeration -* number appended. The registered devices are not explicitely named; +* number appended. The registered devices are not explicitly named; * only 'id' in the device needs to be set. * * Do not use this interface for anything new, it exists for compatibility
drivers/gpu/drm/drm_crtc_helper.c +1 -1
@@ -564,7 +564,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)* Caller must hold mode config lock. * * Setup a new configuration, provided by the upper layers (either an ioctl call -* from userspace or internally e.g. from the fbdev suppport code) in @set, and +* from userspace or internally e.g. from the fbdev support code) in @set, and * enable it. This is the main helper functions for drivers that implement * kernel mode setting with the crtc helper functions and the assorted * ->prepare(), ->modeset() and ->commit() helper callbacks.
drivers/input/sparse-keymap.c +1 -1
@@ -236,7 +236,7 @@ EXPORT_SYMBOL(sparse_keymap_setup);* in an input device that was set up by sparse_keymap_setup(). * NOTE: It is safe to cal this function while input device is * still registered (however the drivers should care not to try to -* use freed keymap and thus have to shut off interrups/polling +* use freed keymap and thus have to shut off interrupts/polling * before freeing the keymap). */ void sparse_keymap_free (struct input_dev *dev)
drivers/regulator/core.c +1 -1
@@ -2141,7 +2141,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled);* @regulator: regulator source * * Returns positive if the regulator driver backing the source/client -* can change its voltage, false otherwise. Usefull for detecting fixed +* can change its voltage, false otherwise. Useful for detecting fixed * or dummy regulators and disabling voltage change logic in the client * driver. */
drivers/scsi/scsi_transport_iscsi.c +3 -3
@@ -1225,7 +1225,7 @@ struct bus_type iscsi_flashnode_bus = {* Adds a sysfs entry for the flashnode session attributes * * Returns: -* pointer to allocated flashnode sess on sucess +* pointer to allocated flashnode sess on success * %NULL on failure */ struct iscsi_bus_flash_session *
@@ -1423,7 +1423,7 @@ static int iscsi_iter_destroy_flashnode_conn_fn(struct device *dev, void *data) }/** -* iscsi_destroy_flashnode_sess - destory flashnode session entry +* iscsi_destroy_flashnode_sess - destroy flashnode session entry * @fnode_sess: pointer to flashnode session entry to be destroyed * * Deletes the flashnode session entry and all children flashnode connection
@@ -1453,7 +1453,7 @@ static int iscsi_iter_destroy_flashnode_fn(struct device *dev, void *data) }/** -* iscsi_destroy_all_flashnode - destory all flashnode session entries +* iscsi_destroy_all_flashnode - destroy all flashnode session entries * @shost: pointer to host data * * Destroys all the flashnode session entries and all corresponding children
drivers/usb/core/message.c +1 -1
@@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg);* * Return: * If successful, 0. Otherwise a negative error number. The number of actual -* bytes transferred will be stored in the @actual_length paramater. +* bytes transferred will be stored in the @actual_length parameter. */ int usb_interrupt_msg (struct usb_device *usb_dev,unsigned int pipe,void *data,int len,int *actual_length,int timeout)
drivers/usb/core/urb.c +1 -1
@@ -831,7 +831,7 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);* * this allows all outstanding URBs to be unlinked starting * from the back of the queue. This function is asynchronous. -* The unlinking is just tiggered. It may happen after this +* The unlinking is just triggered. It may happen after this * function has returned. * * This routine should not be called by a driver after its disconnect
fs/buffer.c +1 -1
@@ -3088,7 +3088,7 @@ EXPORT_SYMBOL(submit_bh);* until the buffer gets unlocked). * * ll_rw_block sets b_end_io to simple completion handler that marks -* the buffer up-to-date (if approriate), unlocks the buffer and wakes +* the buffer up-to-date (if appropriate), unlocks the buffer and wakes * any waiters. * * All of the buffers must be for the same device, and must also be a
fs/debugfs/inode.c +3 -3
@@ -358,7 +358,7 @@ exit:* @name: a pointer to a string containing the name of the file to create. * @mode: the permission that the file should have. * @parent: a pointer to the parent dentry for this file. This should be a -* directory dentry if set. If this paramater is NULL, then the +* directory dentry if set. If this parameter is NULL, then the * file will be created in the root of the debugfs filesystem. * @data: a pointer to something that the caller will want to get to later * on. The inode.i_private pointer will point to this value on
@@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_file);* @name: a pointer to a string containing the name of the directory to * create. * @parent: a pointer to the parent dentry for this file. This should be a -* directory dentry if set. If this paramater is NULL, then the +* directory dentry if set. If this parameter is NULL, then the * directory will be created in the root of the debugfs filesystem. * * This function creates a directory in debugfs with the given name.
@@ -425,7 +425,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir);* @name: a pointer to a string containing the name of the symbolic link to * create. * @parent: a pointer to the parent dentry for this symbolic link. This -* should be a directory dentry if set. If this paramater is NULL, +* should be a directory dentry if set. If this parameter is NULL, * then the symbolic link will be created in the root of the debugfs * filesystem. * @target: a pointer to a string containing the path to the target of the
include/drm/drm_fb_helper.h +1 -1
@@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size {* save the current lut when force-restoring the fbdev for e.g. * kdbg. * @fb_probe: Driver callback to allocate and initialize the fbdev info -* structure. Futhermore it also needs to allocate the drm +* structure. Furthermore it also needs to allocate the drm * framebuffer used to back the fbdev. * @initial_config: Setup an initial fbdev display configuration *
include/linux/hsi/hsi.h +1 -1
@@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)* @complete: Transfer completion callback * @destructor: Destructor to free resources when flushing * @status: Status of the transfer when completed -* @actual_len: Actual length of data transfered on completion +* @actual_len: Actual length of data transferred on completion * @channel: Channel were to TX/RX the message * @ttype: Transfer type (TX if set, RX otherwise) * @break_frame: if true HSI will send/receive a break frame. Data buffers are
include/linux/i2c.h +1 -1
@@ -359,7 +359,7 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,* to name two of the most common. * * The return codes from the @master_xfer field should indicate the type of -* error code that occured during the transfer, as documented in the kernel +* error code that occurred during the transfer, as documented in the kernel * Documentation file Documentation/i2c/fault-codes. */ struct i2c_algorithm {
include/linux/kfifo.h +1 -1
@@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \/** * kfifo_dma_out_finish - finish a DMA OUT operation * @fifo: address of the fifo to be used -* @len: number of bytes transferd +* @len: number of bytes transferrd * * This macro finish a DMA OUT operation. The out counter will be updated by * the len parameter. No error checking will be done.
include/linux/pipe_fs_i.h +1 -1
@@ -35,7 +35,7 @@ struct pipe_buffer {* @tmp_page: cached released page * @readers: number of current readers of this pipe * @writers: number of current writers of this pipe -* @files: number of struct file refering this pipe (protected by ->i_lock) +* @files: number of struct file referring this pipe (protected by ->i_lock) * @waiting_writers: number of writers blocked waiting for room * @r_counter: reader counter * @w_counter: writer counter
include/linux/skbuff.h +1 -1
@@ -2040,7 +2040,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page, }/** -* skb_frag_page - retrieve the page refered to by a paged fragment +* skb_frag_page - retrieve the page referred to by a paged fragment * @frag: the paged fragment * * Returns the &struct page associated with @frag.
include/linux/spi/spi.h +4 -4
@@ -237,7 +237,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)* @mode_bits: flags understood by this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is -* suported. If set, the SPI core will reject any transfer with an +* supported. If set, the SPI core will reject any transfer with an * unsupported bits_per_word. If not set, this value is simply ignored, * and it's up to the individual driver to perform any validation. * @min_speed_hz: Lowest supported transfer speed
@@ -262,7 +262,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)* @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message -* @xfer_completion: used by core tranfer_one_message() +* @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running * @rt: whether this queue is set to run as a realtime task
@@ -525,7 +525,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);* @rx_buf: data to be read (dma-safe memory), or NULL * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped -* @tx_nbits: number of bits used for writting. If 0 the default +* @tx_nbits: number of bits used for writing. If 0 the default * (SPI_NBITS_SINGLE) is used. * @rx_nbits: number of bits used for reading. If 0 the default * (SPI_NBITS_SINGLE) is used.
@@ -585,7 +585,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);* by the results of previous messages and where the whole transaction * ends when the chipselect goes intactive. * -* When SPI can transfer in 1x,2x or 4x. It can get this tranfer information +* When SPI can transfer in 1x,2x or 4x. It can get this transfer information * from device through @tx_nbits and @rx_nbits. In Bi-direction, these * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x) * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer.
include/linux/usb/composite.h +1 -1
@@ -92,7 +92,7 @@ struct usb_configuration;* @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to -* GetStatus() request when the recepient is Interface. +* GetStatus() request when the recipient is Interface. * @func_suspend: callback to be called when * SetFeature(FUNCTION_SUSPEND) is reseived *
include/linux/usb/gadget.h +1 -1
@@ -190,7 +190,7 @@ struct usb_ep {* @ep:the endpoint being configured * @maxpacket_limit:value of maximum packet size limit * -* This function shoud be used only in UDC drivers to initialize endpoint +* This function should be used only in UDC drivers to initialize endpoint * (usually in probe function). */ static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
include/net/mac80211.h +3 -3
@@ -1896,7 +1896,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);* * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the -* uapsd paramater in conf_tx() operation. Hardware needs to send the QoS +* uapsd parameter in conf_tx() operation. Hardware needs to send the QoS * Nullfunc frames and stay awake until the service period has ended. To * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames * from that AC are transmitted with powersave enabled.
@@ -2102,7 +2102,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);* with the number of frames to be released and which TIDs they are * to come from. In this case, the driver is responsible for setting * the EOSP (for uAPSD) and MORE_DATA bits in the released frames, -* to help the @more_data paramter is passed to tell the driver if +* to help the @more_data parameter is passed to tell the driver if * there is more data on other TIDs -- the TIDs to release frames * from are ignored since mac80211 doesn't know how many frames the * buffers for those TIDs contain.
@@ -2663,7 +2663,7 @@ enum ieee80211_roc_type {* parameters. In the case where the driver buffers some frames for * sleeping stations mac80211 will use this callback to tell the driver * to release some frames, either for PS-poll or uAPSD. -* Note that if the @more_data paramter is %false the driver must check +* Note that if the @more_data parameter is %false the driver must check * if there are more frames on the given TIDs, and if there are more than * the frames being released then it must still set the more-data bit in * the frame. If the @more_data parameter is %true, then of course the
ipc/util.c +3 -3
@@ -309,7 +309,7 @@ int ipc_addid(struct ipc_ids *ids, struct kern_ipc_perm *new, int size)/** * ipcget_new - create a new ipc object * @ns: ipc namespace -* @ids: ipc identifer set +* @ids: ipc identifier set * @ops: the actual creation routine to call * @params: its parameters *
@@ -363,7 +363,7 @@ static int ipc_check_perms(struct ipc_namespace *ns,/** * ipcget_public - get an ipc object or create a new one * @ns: ipc namespace -* @ids: ipc identifer set +* @ids: ipc identifier set * @ops: the actual creation routine to call * @params: its parameters *
@@ -669,7 +669,7 @@ out:/** * ipcget - Common sys_*get() code -* @ns: namsepace +* @ns: namespace * @ids: ipc identifier set * @ops: operations to be called on ipc object creation, permission checks * and further checks
kernel/relay.c +1 -1
@@ -227,7 +227,7 @@ static void relay_destroy_buf(struct rchan_buf *buf)* relay_remove_buf - remove a channel buffer * @kref: target kernel reference that contains the relay buffer * -* Removes the file from the fileystem, which also frees the +* Removes the file from the filesystem, which also frees the * rchan_buf_struct and the channel buffer. Should only be called from * kref_put(). */
kernel/signal.c +1 -1
@@ -2384,7 +2384,7 @@ relock:* @regs: user register state * @stepping: nonzero if debugger single-step or block-step in use * -* This function should be called when a signal has succesfully been +* This function should be called when a signal has successfully been * delivered. It updates the blocked signals accordingly (@ka->sa.sa_mask * is always blocked, and the signal itself is blocked unless %SA_NODEFER * is set in @ka->sa.sa_flags. Tracing is notified.
net/core/dev.c +1 -1
@@ -3441,7 +3441,7 @@ out:* @rx_handler: receive handler to register * @rx_handler_data: data pointer that is used by rx handler * -* Register a receive hander for a device. This handler will then be +* Register a receive handler for a device. This handler will then be * called from __netif_receive_skb. A negative errno code is returned * on a failure. *
Signature · 1 line
1.9.0
Quoted 5 lines · Masanari Iida
This patch fix spelling typo in
Documentation/DocBook. It is because .html and .xml files are generated by make htmldocs, I have to fix a typo within the source files.Signed-off-by Masanari Iida <[email protected]>
Acked-by Randy Dunlap <[email protected]>
Thanks.
Quoted 29 lines
--- arch/s390/include/asm/cio.h | 2 +- block/blk-core.c | 2 +- block/blk-map.c | 2 +- drivers/ata/libata-core.c | 4 ++-- drivers/base/bus.c | 2 +- drivers/gpu/drm/drm_crtc_helper.c | 2 +- drivers/input/sparse-keymap.c | 2 +- drivers/regulator/core.c | 2 +- drivers/scsi/scsi_transport_iscsi.c | 6 +++--- drivers/usb/core/message.c | 2 +- drivers/usb/core/urb.c | 2 +- fs/buffer.c | 2 +- fs/debugfs/inode.c | 6 +++--- include/drm/drm_fb_helper.h | 2 +- include/linux/hsi/hsi.h | 2 +- include/linux/i2c.h | 2 +- include/linux/kfifo.h | 2 +- include/linux/pipe_fs_i.h | 2 +- include/linux/skbuff.h | 2 +- include/linux/spi/spi.h | 8 ++++---- include/linux/usb/composite.h | 2 +- include/linux/usb/gadget.h | 2 +- include/net/mac80211.h | 6 +++--- ipc/util.c | 6 +++--- kernel/relay.c | 2 +- kernel/signal.c | 2 +- net/core/dev.c | 2 +- 27 files changed, 39 insertions(+), 39 deletions(-)
Signature · 1 line
~Randy