Skip to contentSkip to conversation

DRA7: fix ABB efuse offset for OPP_NOM

PATCH In review Nishanth Menon 2 participants 2 messages Feb 18, 2014 – Feb 21, 2014 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 DRA7: fix ABB efuse offset for OPP_NOM

commit 194dd74ad919e57026f385aaab7f89acf7ea79ef
(DRA7: add ABB setup for MPU voltage domain)

Made an offset typo error by using 0x4A003B24 as the efuse offset for OPP_NOM. As per TI documentation, 0x4A003B24 is for OPP_OD, and 0x4A003B20 is for OPP_NOM. Fix the same.

---

Unfortunately, this happened to slip past my results as the sample I had used happened to have the same values for both registers.

Based on u-boot-arm
5e77a74 ARM: bcm2835: fix mbox POWER_STATE_RESP_ON value

 arch/arm/cpu/armv7/omap5/prcm-regs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/cpu/armv7/omap5/prcm-regs.c +1 -1
index ff32807..7292161 100644
@@ -432,7 +432,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_code_latch		= 0x4A002E84,
 	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
-	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B24,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B20,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
Signature · 1 line
1.7.9.5
#1 lore raw
Quoted 9 lines · Nishanth Menon

commit 194dd74ad919e57026f385aaab7f89acf7ea79ef
(DRA7: add ABB setup for MPU voltage domain)

Made an offset typo error by using 0x4A003B24 as the efuse offset for OPP_NOM. As per TI documentation, 0x4A003B24 is for OPP_OD, and 0x4A003B20 is for OPP_NOM. Fix the same.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/0c138505/attachment.pgp>