ARM: tegra: Add head numbers to display controllers
Subsystems (2)
PATCH 1/1 ARM: tegra: Add head numbers to display controllers
From: Thierry Reding <[email protected]>
The number of the head specifies the index of the display controller unit and is required to properly configure outputs so that they receive video data from the correct source.
---
Hi Olof, Kevin,
Stephen requested that I send this patch your way so that it can be applied for 3.14. They aren't strictly necessary because there's a fallback if they are missing but if they aren't present, the driver will output undesirable error messages.
Thanks,
Thierry
arch/arm/boot/dts/tegra114.dtsi | 4 ++++ arch/arm/boot/dts/tegra20.dtsi | 4 ++++ arch/arm/boot/dts/tegra30.dtsi | 4 ++++ 3 files changed, 12 insertions(+)
arch/arm/boot/dts/tegra114.dtsi +4 -0
@@ -57,6 +57,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; };
@@ -72,6 +74,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; };
arch/arm/boot/dts/tegra20.dtsi +4 -0
@@ -94,6 +94,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; };
@@ -109,6 +111,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; };
arch/arm/boot/dts/tegra30.dtsi +4 -0
@@ -170,6 +170,8 @@ resets = <&tegra_car 27>; reset-names = "dc"; + nvidia,head = <0>; + rgb { status = "disabled"; };
@@ -185,6 +187,8 @@ resets = <&tegra_car 26>; reset-names = "dc"; + nvidia,head = <1>; + rgb { status = "disabled"; };
Signature · 1 line
1.8.4.2
PATCH 1/1 ARM: tegra: Add head numbers to display controllers
Quoted 5 lines · Thierry Reding
From: Thierry Reding <[email protected]>
The number of the head specifies the index of the display controller unit and is required to properly configure outputs so that they receive video data from the correct source.
Olof Johansson
AppliedPATCH 1/1 ARM: tegra: Add head numbers to display controllers
Quoted 8 lines · Stephen Warren
Quoted 5 lines · Thierry Reding
From: Thierry Reding <[email protected]>
The number of the head specifies the index of the display controller unit and is required to properly configure outputs so that they receive video data from the correct source.
Acked-by Stephen Warren <[email protected]>
Applied.
-Olof