Skip to contentSkip to conversation

DT support for kirkwood based Synology NAS boxes

PATCH New klightspeed at killerwolves.net 4 participants 11 messages Feb 19, 2014 – Mar 4, 2014

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v7 cover DT support for kirkwood based Synology NAS boxes

This patchset adds support for around 30 kirkwood bases Synology NAS boxes. Patch #1 documents vendor prefixes. Patch #2 generalizes the qnap power off driver so that it can also be used for Synology devices. Patch #3 adds sii,s35390a to i2c trivial devices. Patch #4 adds the synology DT files.

v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware

v3:
Merge synology dtsi files into a single dtsi file

v4:
Various minor fixes to synology dtsi file

v5:
Fix typos in commit messages
Remove unnecessary casts in qnap-poweroff.c

v6:
Revert qnap vendor prefix change from v5

v7:
Revert ricoh vendor prefix change from v2

Andrew Lunn (3):
DT: Vendor prefixes: Add ricoh, qnap, sii and synology
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: i2c: Trivial: Add sii,s35390a

Ben Peddell (1):
ARM: Kirkwood: Add support for many Synology NAS devices

 .../devicetree/bindings/i2c/trivial-devices.txt    |   1 +
 .../bindings/power_supply/qnap-poweroff.txt        |   5 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   4 +
 arch/arm/boot/dts/Makefile                         |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts               |  41 +
 arch/arm/boot/dts/kirkwood-ds110jv10.dts           |  41 +
 arch/arm/boot/dts/kirkwood-ds111.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts               |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts               |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts              |  41 +
 arch/arm/boot/dts/kirkwood-ds409.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts           |  40 +
 arch/arm/boot/dts/kirkwood-ds411.dts               |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts              |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts           |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi           | 871 +++++++++++++++++++++
 drivers/power/reset/qnap-poweroff.c                |  49 +-
 22 files changed, 1656 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
Signature · 1 line
1.8.3.2
#1 lore raw

PATCH v7 1/4 DT: Vendor prefixes: Add ricoh, qnap, sii and synology

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names:
* ricoh (Ricoh Co. Ltd.);
* qnap (QNAP Systems, Inc.);
* sii (Seiko Instruments, Inc.); and
* synology (Synology, Inc.)

Add them to the vendor prefix list.

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

v5:
Add vendor prefix for QNAP

v6:
Revert qnap vendor prefix change from v5
Now properly based on -rc1

v7:
Revert ricoh vendor prefix change from v2

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +4 -0
index 3f900cd..4a52fa9 100644
@@ -65,10 +65,12 @@ picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm, Inc.
+qnap	QNAP Systems, Inc.
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas	Renesas Electronics Corporation
+ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
@@ -76,11 +78,13 @@ schindler	Schindler
 sil	Silicon Image
 silabs	Silicon Laboratories
 simtek
+sii	Seiko Instruments, Inc.
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
+synology	Synology, Inc.
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toshiba	Toshiba Corporation
Signature · 1 line
1.8.3.2
#2 lore raw

PATCH v7 1/4 DT: Vendor prefixes: Add ricoh, qnap, sii and synology

Quoted 8 lines · On Wed, Feb 19, 2014 at 2:02 PM, <[email protected]> wrote:

From: Andrew Lunn <[email protected]>

The following patches make use of vendor names:
* ricoh (Ricoh Co. Ltd.);
* qnap (QNAP Systems, Inc.);
* sii (Seiko Instruments, Inc.); and
* synology (Synology, Inc.)

Quoted 5 lines

Add them to the vendor prefix list.

Quoted 53 lines

---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/

v5:
Add vendor prefix for QNAP

v6:
Revert qnap vendor prefix change from v5
Now properly based on -rc1

v7:
Revert ricoh vendor prefix change from v2

---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +4 -1
index 3f900cd..4a52fa9 100644
@@ -65,10 +65,12 @@ picochip    Picochip Ltd
 powervr        PowerVR (deprecated, use img)
 qca    Qualcomm Atheros, Inc.
 qcom   Qualcomm, Inc.
+qnap   QNAP Systems, Inc.
 ralink Mediatek/Ralink Technology Corp.
 ramtron        Ramtron International
 realtek Realtek Semiconductor Corp.
 renesas        Renesas Electronics Corporation
+ricoh  Ricoh Co. Ltd.
 rockchip       Fuzhou Rockchip Electronics Co., Ltd
 samsung        Samsung Semiconductor
 sbs    Smart Battery System
@@ -76,11 +78,13 @@ schindler   Schindler
 sil    Silicon Image
 silabs Silicon Laboratories
 simtek
+sii    Seiko Instruments, Inc.
 sirf   SiRF Technology, Inc.
 snps   Synopsys, Inc.
 st     STMicroelectronics
 ste    ST-Ericsson
 stericsson     ST-Ericsson
+synology       Synology, Inc.
 ti     Texas Instruments
 tlm    Trusted Logic Mobility
 toshiba        Toshiba Corporation
--

1.8.3.2

#3 lore raw

PATCH v7 2/4 Power: Reset: Generalize qnap-poweroff to work on Synology devices.

In reply to klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.

Cc Anton Vorontsov <[email protected]>
Cc Dmitry Eremin-Solenikov <[email protected]>
Cc David Woodhouse <[email protected]>
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 49 ++++++++++++++++------
 2 files changed, 41 insertions(+), 13 deletions(-)
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
index 0347d83..af25e77 100644
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +37 -12

87 lines not on this page · raw message

Signature · 1 line
1.8.3.2
#4 lore raw

PATCH v7 2/4 Power: Reset: Generalize qnap-poweroff to work on Synology devices.

Dmitry, David,

Quoted 13 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.

Cc Anton Vorontsov <[email protected]>
Cc Dmitry Eremin-Solenikov <[email protected]>
Cc David Woodhouse <[email protected]>
Quoted 4 lines
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 49 ++++++++++++++++------
 2 files changed, 41 insertions(+), 13 deletions(-)

Do you guys want to take this, or me? I'm fine either way, there's no dependencies.

thx,

Jason.

Quoted 120 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
index 0347d83..af25e77 100644
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +37 -12
index 37f56f7..a75db7f 100644
@@ -1,5 +1,5 @@
 /*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
  *
  * Copyright (C) 2012 Andrew Lunn <[email protected]>
  *
@@ -25,17 +25,43 @@
 
 #define UART1_REG(x)	(base + ((UART_##x) << 2))
 
+struct power_off_cfg {
+	u32 baud;
+	char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+	.baud = 19200,
+	.cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+	.baud = 9600,
+	.cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+	{ .compatible = "qnap,power-off",
+	  .data = &qnap_power_off_cfg,
+	},
+	{ .compatible = "synology,power-off",
+	  .data = &synology_power_off_cfg,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
 static void __iomem *base;
 static unsigned long tclk;
+static const struct power_off_cfg *cfg;
 
 static void qnap_power_off(void)
 {
-	/* 19200 baud divisor */
-	const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
 	pr_err("%s: triggering power-off...\n", __func__);
 
-	/* hijack UART1 and reset into sane state (19200,8n1) */
+	/* hijack UART1 and reset into sane state */
 	writel(0x83, UART1_REG(LCR));
 	writel(divisor & 0xff, UART1_REG(DLL));
 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
 	writel(0x00, UART1_REG(FCR));
 	writel(0x00, UART1_REG(MCR));
 
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
+	/* send the power-off command to PIC */
+	writel(cfg->cmd, UART1_REG(TX));
 }
 
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct clk *clk;
 	char symname[KSYM_NAME_LEN];
 
+	const struct of_device_id *match =
+		of_match_node(qnap_power_off_of_match_table, np);
+	cfg = match->data;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qnap_power_off_of_match_table[] = {
-	{ .compatible = "qnap,power-off", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
 static struct platform_driver qnap_power_off_driver = {
 	.probe	= qnap_power_off_probe,
 	.remove	= qnap_power_off_remove,
Signature · 7 lines
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#5 lore raw

PATCH v7 2/4 Power: Reset: Generalize qnap-poweroff to work on Synology devices.

Quoted 21 lines · Jason Cooper

Dmitry, David,

Quoted 13 lines · klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.

Cc Anton Vorontsov <[email protected]>
Cc Dmitry Eremin-Solenikov <[email protected]>
Cc David Woodhouse <[email protected]>
Quoted 4 lines
---
 .../bindings/power_supply/qnap-poweroff.txt        |  5 ++-
 drivers/power/reset/qnap-poweroff.c                | 49 ++++++++++++++++------
 2 files changed, 41 insertions(+), 13 deletions(-)
Quoted 2 lines

Do you guys want to take this, or me? I'm fine either way, there's no dependencies.

Hmmm, it's been over a week. Since it's isolated to a driver only kirkwood/mvebu devices use, I'll go ahead a queue this up to go through mvebu/arm-soc for v3.15. Please ping me in the next few days if you'd prefer I drop it.

Applied to mvebu/drivers

thx,

Jason.

Quoted 124 lines
Quoted 120 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
index 0347d83..af25e77 100644
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
 microcontroller to turn the power off. This driver adds a handler to
 pm_power_off which is called to turn the power off.
 
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
 Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
 
 - reg: Address and length of the register set for UART1
 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +37 -12
index 37f56f7..a75db7f 100644
@@ -1,5 +1,5 @@
 /*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
  *
  * Copyright (C) 2012 Andrew Lunn <[email protected]>
  *
@@ -25,17 +25,43 @@
 
 #define UART1_REG(x)	(base + ((UART_##x) << 2))
 
+struct power_off_cfg {
+	u32 baud;
+	char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+	.baud = 19200,
+	.cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+	.baud = 9600,
+	.cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+	{ .compatible = "qnap,power-off",
+	  .data = &qnap_power_off_cfg,
+	},
+	{ .compatible = "synology,power-off",
+	  .data = &synology_power_off_cfg,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
 static void __iomem *base;
 static unsigned long tclk;
+static const struct power_off_cfg *cfg;
 
 static void qnap_power_off(void)
 {
-	/* 19200 baud divisor */
-	const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
 
 	pr_err("%s: triggering power-off...\n", __func__);
 
-	/* hijack UART1 and reset into sane state (19200,8n1) */
+	/* hijack UART1 and reset into sane state */
 	writel(0x83, UART1_REG(LCR));
 	writel(divisor & 0xff, UART1_REG(DLL));
 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
 	writel(0x00, UART1_REG(FCR));
 	writel(0x00, UART1_REG(MCR));
 
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
+	/* send the power-off command to PIC */
+	writel(cfg->cmd, UART1_REG(TX));
 }
 
 static int qnap_power_off_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct clk *clk;
 	char symname[KSYM_NAME_LEN];
 
+	const struct of_device_id *match =
+		of_match_node(qnap_power_off_of_match_table, np);
+	cfg = match->data;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qnap_power_off_of_match_table[] = {
-	{ .compatible = "qnap,power-off", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
 static struct platform_driver qnap_power_off_driver = {
 	.probe	= qnap_power_off_probe,
 	.remove	= qnap_power_off_remove,
Signature · 7 lines
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

#6 lore raw

PATCH v7 3/4 DT: i2c: Trivial: Add sii,s35390a

In reply to klightspeed at killerwolves.net

From: Andrew Lunn <[email protected]>

Add the Seiko Instruments Inc S35390a to the list of trivial i2c devices.

---
 Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 +
 1 file changed, 1 insertions(+)
Documentation/devicetree/bindings/i2c/trivial-devices.txt +1 -0
index 1a1ac2e..5f37191 100644
@@ -58,6 +58,7 @@ plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
 ramtron,24c64		i2c serial eeprom  (24cxx)
 ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a		2-wire CMOS real-time clock
 st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
Signature · 1 line
1.8.3.2
#7 lore raw

PATCH v7 4/4 ARM: Kirkwood: Add support for many Synology NAS devices

In reply to klightspeed at killerwolves.net

From: "Ben Peddell" <[email protected]>

Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <[email protected]> translation of the board setup file maintained by Ben Peddell <[email protected]>

The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC.

Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43.

Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply.

Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards.

---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker

v3:
Merge Synology dtsi files into single dtsi file

v4:
Various minor fixes to synology dtsi file

v7:
Revert ricoh vendor prefix change from v2

---
 arch/arm/boot/dts/Makefile               |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts     |  41 ++
 arch/arm/boot/dts/kirkwood-ds110jv10.dts |  41 ++
 arch/arm/boot/dts/kirkwood-ds111.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts     |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts     |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts    |  41 ++
 arch/arm/boot/dts/kirkwood-ds409.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts |  40 ++
 arch/arm/boot/dts/kirkwood-ds411.dts     |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts    |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++
 18 files changed, 1610 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
arch/arm/boot/dts/Makefile +15 -0
index 6d1e43d..e286abc 100644
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
arch/arm/boot/dts/kirkwood-ds109.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds110jv10.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds111.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds112.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds209.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds210.dts new file +46 -0

46 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds212.dts new file +47 -0

47 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds212j.dts new file +41 -0

41 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds409.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds409slim.dts new file +40 -0
new file mode 100644
index 0000000..1848a62
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds411.dts new file +52 -0

52 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds411j.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-ds411slim.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs212.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs409.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-rs411.dts new file +44 -0

44 lines not on this page · raw message

arch/arm/boot/dts/kirkwood-synology.dtsi new file +871 -0

871 lines not on this page · raw message

Signature · 1 line
1.8.3.2
#8 lore raw

PATCH v7 4/4 ARM: Kirkwood: Add support for many Synology NAS devices

Quoted 23 lines · klightspeed at killerwolves.net

From: "Ben Peddell" <[email protected]>

Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <[email protected]> translation of the board setup file maintained by Ben Peddell <[email protected]>

The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC.

Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43.

Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply.

Quoted 8 lines

Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards.

Since it is based on my code:

Andrew

Quoted 1,788 lines

---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker

v3:
Merge Synology dtsi files into single dtsi file

v4:
Various minor fixes to synology dtsi file

v7:
Revert ricoh vendor prefix change from v2

---
 arch/arm/boot/dts/Makefile               |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts     |  41 ++
 arch/arm/boot/dts/kirkwood-ds110jv10.dts |  41 ++
 arch/arm/boot/dts/kirkwood-ds111.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts     |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts     |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts    |  41 ++
 arch/arm/boot/dts/kirkwood-ds409.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts |  40 ++
 arch/arm/boot/dts/kirkwood-ds411.dts     |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts    |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts     |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts     |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++
 18 files changed, 1610 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
arch/arm/boot/dts/Makefile +15 -0
index 6d1e43d..e286abc 100644
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
 	kirkwood-goflexnet.dtb \
 	kirkwood-guruplug-server-plus.dtb \
 	kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-nsa310a.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
arch/arm/boot/dts/kirkwood-ds109.dts new file +41 -0
new file mode 100644
index 0000000..772092c
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds110jv10.dts new file +41 -0
new file mode 100644
index 0000000..aabafbe
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds111.dts new file +44 -0
new file mode 100644
index 0000000..16ec7fb
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds112.dts new file +48 -0
new file mode 100644
index 0000000..cff1b23
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds209.dts new file +44 -0
new file mode 100644
index 0000000..3304119
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds210.dts new file +46 -0
new file mode 100644
index 0000000..6052eaa
@@ -0,0 +1,46 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds212.dts new file +47 -0
new file mode 100644
index 0000000..7f76cd3
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds212j.dts new file +41 -0
new file mode 100644
index 0000000..1f83a00
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds409.dts new file +48 -0
new file mode 100644
index 0000000..0a573ad
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds409slim.dts new file +40 -0
new file mode 100644
index 0000000..1848a62
@@ -0,0 +1,40 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds411.dts new file +52 -0
new file mode 100644
index 0000000..a1737b4
@@ -0,0 +1,52 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds411j.dts new file +48 -0
new file mode 100644
index 0000000..0cde914
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-ds411slim.dts new file +48 -0
new file mode 100644
index 0000000..aef0cad
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-rs212.dts new file +48 -0
new file mode 100644
index 0000000..93ec3d0
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-rs409.dts new file +44 -0
new file mode 100644
index 0000000..311df4e
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-rs411.dts new file +44 -0
new file mode 100644
index 0000000..f90da85
@@ -0,0 +1,44 @@
+/*
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
arch/arm/boot/dts/kirkwood-synology.dtsi new file +871 -0
new file mode 100644
index 0000000..92b3177
@@ -0,0 +1,871 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <[email protected]>
+ * Ben Peddell <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie at 1,0 {
+				status = "okay";
+			};
+
+			pcie2: pcie at 2,0 {
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp at f1000000 {
+		pinctrl: pinctrl at 10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc at 10300 {
+			status = "disabled";
+		};
+
+		spi at 10600 {
+			status = "okay";
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition at 00000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition at 00080000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition at 00280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition at 003c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition at 003d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition at 003f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c at 11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+
+			rs5c372: rs5c372 at 32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a at 30 {
+				status = "disabled";
+				compatible = "ssi,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial at 12000 {
+			status = "okay";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+		};
+
+		serial at 12100 {
+			status = "okay";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+		};
+
+		poweroff at 12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata at 80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator at 4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy at 1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port at 0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port at 0 {
+		phy-handle = <&ethphy1>;
+	};
+};
Signature · 1 line
1.8.3.2
#9 lore raw

v7 cover DT support for kirkwood based Synology NAS boxes

In reply to klightspeed at killerwolves.net
Quoted 5 lines · klightspeed at killerwolves.net

This patchset adds support for around 30 kirkwood bases Synology NAS boxes. Patch #1 documents vendor prefixes. Patch #2 generalizes the qnap power off driver so that it can also be used for Synology devices. Patch #3 adds sii,s35390a to i2c trivial devices. Patch #4 adds the synology DT files.

Hi Ben

Thanks for finishing this.

Whole series:

Andrew

Applied
#10 lore raw

v7 cover DT support for kirkwood based Synology NAS boxes

In reply to klightspeed at killerwolves.net

Ben,

Quoted 5 lines · klightspeed at killerwolves.net

This patchset adds support for around 30 kirkwood bases Synology NAS boxes. Patch #1 documents vendor prefixes. Patch #2 generalizes the qnap power off driver so that it can also be used for Synology devices. Patch #3 adds sii,s35390a to i2c trivial devices. Patch #4 adds the synology DT files.

...

Quoted 40 lines

Andrew Lunn (3):
DT: Vendor prefixes: Add ricoh, qnap, sii and synology
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: i2c: Trivial: Add sii,s35390a

Ben Peddell (1):
ARM: Kirkwood: Add support for many Synology NAS devices

 .../devicetree/bindings/i2c/trivial-devices.txt    |   1 +
 .../bindings/power_supply/qnap-poweroff.txt        |   5 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   4 +
 arch/arm/boot/dts/Makefile                         |  15 +
 arch/arm/boot/dts/kirkwood-ds109.dts               |  41 +
 arch/arm/boot/dts/kirkwood-ds110jv10.dts           |  41 +
 arch/arm/boot/dts/kirkwood-ds111.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds112.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds209.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-ds210.dts               |  46 ++
 arch/arm/boot/dts/kirkwood-ds212.dts               |  47 ++
 arch/arm/boot/dts/kirkwood-ds212j.dts              |  41 +
 arch/arm/boot/dts/kirkwood-ds409.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-ds409slim.dts           |  40 +
 arch/arm/boot/dts/kirkwood-ds411.dts               |  52 ++
 arch/arm/boot/dts/kirkwood-ds411j.dts              |  48 ++
 arch/arm/boot/dts/kirkwood-ds411slim.dts           |  48 ++
 arch/arm/boot/dts/kirkwood-rs212.dts               |  48 ++
 arch/arm/boot/dts/kirkwood-rs409.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-rs411.dts               |  44 ++
 arch/arm/boot/dts/kirkwood-synology.dtsi           | 871 +++++++++++++++++++++
 drivers/power/reset/qnap-poweroff.c                |  49 +-
 22 files changed, 1656 insertions(+), 13 deletions(-)
 create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts
Quoted 8 lines
 create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi

I applied patches 1, 3, and 4 to mvebu/dt.

Thanks and good work!

Jason.