MIDI driver for Behringer BCD2000 USB device
PATCH 1/1 MIDI driver for Behringer BCD2000 USB device
This patch adds initial support for the Behringer BCD2000 USB DJ controller. At the moment, only the MIDI part of the device is working, i.e. knobs, buttons and LEDs.
I also plan to add support for the audio part, but I assume that this will require more effort than the rather simple MIDI interface. Progress can be tracked at https://github.com/anyc/snd-usb-bcd2000.
Changes since v4:
- devices_used as array to support arbitrary number of SNDRV_CARDS
- removed unused array "enable"
Changes since v3:
- applied style and snd_printk changes as suggested by Daniel Mack
Changes since v2:
- applied more changes from Daniel Mack and Clemens Ladisch
Changes since v1:
- fixed the various code style issues, thanks to Daniel Mack and checkpatch.pl.
--- sound/usb/Kconfig | 13 ++ sound/usb/Makefile | 2 +- sound/usb/bcd2000/Makefile | 3 + sound/usb/bcd2000/bcd2000.c | 490 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 507 insertions(+), 1 deletion(-) create mode 100644 sound/usb/bcd2000/Makefile create mode 100644 sound/usb/bcd2000/bcd2000.c
sound/usb/Kconfig +13 -0
@@ -146,5 +146,18 @@ config SND_USB_HIFACE To compile this driver as a module, choose M here: the module will be called snd-usb-hiface. +config SND_BCD2000 + tristate "Behringer BCD2000 MIDI driver" + select SND_RAWMIDI + help + Say Y here to include MIDI support for the Behringer BCD2000 DJ + controller. + + Audio support is still work-in-progress at + https://github.com/anyc/snd-usb-bcd2000 + + To compile this driver as a module, choose M here: the module + will be called snd-bcd2000. + endif # SND_USB
sound/usb/Makefile +1 -1
@@ -23,4 +23,4 @@ obj-$(CONFIG_SND_USB_UA101) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o -obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ +obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/
sound/usb/bcd2000/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +snd-bcd2000-y := bcd2000.o + +obj-$(CONFIG_SND_BCD2000) += snd-bcd2000.o
sound/usb/bcd2000/bcd2000.c new file +490 -0
490 lines not on this page · raw message
Signature · 1 line
1.8.3.2
Quoted 7 lines · Mario Kicherer
This patch adds initial support for the Behringer BCD2000 USB DJ controller. At the moment, only the MIDI part of the device is working, i.e. knobs, buttons and LEDs.
I also plan to add support for the audio part, but I assume that this will require more effort than the rather simple MIDI interface. Progress can be tracked at https://github.com/anyc/snd-usb-bcd2000.
...
Quoted 3 lines
sound/usb/bcd2000/bcd2000.c new file +3
-0+static int bcd2000_probe (struct usb_interface *interface, +const struct usb_device_id *usb_id) +{
...
Quoted 4 lines
sound/usb/bcd2000/bcd2000.c new file +4
-0+usb_set_intfdata (interface, bcd2k); + devices_used[card_index/sizeof (int )*8 ] |= +1 << (card_index%(sizeof (int )*8 )); +
...
Quoted 2 lines
(quoted diff) +2
-0+static void bcd2000_disconnect(struct usb_interface *interface) +{
...
sound/usb/bcd2000/bcd2000.c line 455
Quoted 2 lines
sound/usb/bcd2000/bcd2000.c new file +2
-0+ devices_used[bcd2k->card_index/sizeof (int )*8 ] &= + ~(1 << (bcd2k->card_index%(sizeof (int )*8 )));
We have much nicer ways of doing this :)
Have a look at include/linux/bitmap.h, especially set_bit(), clear_bit() and DECLARE_BITMAP().