mtd: bcm53xxnflash: add driver for NAND on new BCMA SoCs
Subsystems (2)
---
It doesn't implement NAND operations in any way yet. I'll continue working on this, but wanted avoid duplicating work with sb else.
--- drivers/mtd/nand/Kconfig | 9 +++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/bcm53xxnflash.c | 144 +++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/bcm53xxnflash.h | 126 ++++++++++++++++++++++++++++++++++ 4 files changed, 280 insertions(+) create mode 100644 drivers/mtd/nand/bcm53xxnflash.c create mode 100644 drivers/mtd/nand/bcm53xxnflash.h
drivers/mtd/nand/Kconfig +9 -0
@@ -397,6 +397,15 @@ config MTD_NAND_BCM47XXNFLASH registered by bcma as platform devices. This enables driver for NAND flash memories. For now only BCM4706 is supported. +config MTD_NAND_BCM53XXNFLASH + tristate "Support for BCMA NAND attached as standalone core" + depends on BCMA + help + This enables support for NAND flash memories attached to BCMA bus as + separated bus cores. They most probably can be found only on ARM based + Broadcom SoCs. System reports such devices as: + bcma: bus0: Core N found: NAND flash controller (...) + config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" depends on HAS_IOMEM
drivers/mtd/nand/Makefile +1 -0
@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ +obj-$(CONFIG_MTD_NAND_BCM53XXNFLASH) += bcm53xxnflash.o nand-objs := nand_base.o nand_bbt.o
drivers/mtd/nand/bcm53xxnflash.c new file +144 -0
144 lines not on this page · raw message
drivers/mtd/nand/bcm53xxnflash.h new file +126 -0
126 lines not on this page · raw message
Signature · 1 line
1.8.4.5
PATCH v2 1/1 mtd: bcm53xxnflash: add driver for NAND on new BCMA SoCs
---
This version implements NAND_CMD_READID and few other simple ones.
--- drivers/mtd/nand/Kconfig | 9 ++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/bcm53xxnflash.c | 254 +++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/bcm53xxnflash.h | 159 ++++++++++++++++++++++++ 4 files changed, 423 insertions(+) create mode 100644 drivers/mtd/nand/bcm53xxnflash.c create mode 100644 drivers/mtd/nand/bcm53xxnflash.h
drivers/mtd/nand/Kconfig +9 -0
@@ -397,6 +397,15 @@ config MTD_NAND_BCM47XXNFLASH registered by bcma as platform devices. This enables driver for NAND flash memories. For now only BCM4706 is supported. +config MTD_NAND_BCM53XXNFLASH + tristate "Support for BCMA NAND attached as standalone core" + depends on BCMA + help + This enables support for NAND flash memories attached to BCMA bus as + separated bus cores. They most probably can be found only on ARM based + Broadcom SoCs. System reports such devices as: + bcma: bus0: Core N found: NAND flash controller (...) + config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" depends on HAS_IOMEM
drivers/mtd/nand/Makefile +1 -0
@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ +obj-$(CONFIG_MTD_NAND_BCM53XXNFLASH) += bcm53xxnflash.o nand-objs := nand_base.o nand_bbt.o
drivers/mtd/nand/bcm53xxnflash.c new file +254 -0
254 lines not on this page · raw message
drivers/mtd/nand/bcm53xxnflash.h new file +159 -0
159 lines not on this page · raw message
Signature · 1 line
1.8.4.5