Skip to contentSkip to conversation

ath9k: reduce baseband hang detection false positive rate

PATCH New Felix Fietkau 1 participant 2 messages Feb 25, 2014 Qualcomm Atheros ATH9K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ath9k: reduce baseband hang detection false positive rate

Check if the baseband state remains stable, and add a small delay between register reads.

---
 drivers/net/wireless/ath/ath9k/hw.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath9k/hw.c +7 -1
index 11eab9f..303ce27 100644
@@ -1534,7 +1534,7 @@ EXPORT_SYMBOL(ath9k_hw_check_nav);
 bool ath9k_hw_check_alive(struct ath_hw *ah)
 {
 	int count = 50;
-	u32 reg;
+	u32 reg, last_val;
 
 	if (AR_SREV_9300(ah))
 		return !ath9k_hw_detect_mac_hang(ah);
@@ -1542,9 +1542,13 @@ bool ath9k_hw_check_alive(struct ath_hw *ah)
 	if (AR_SREV_9285_12_OR_LATER(ah))
 		return true;
 
+	last_val = REG_READ(ah, AR_OBS_BUS_1);
 	do {
 		reg = REG_READ(ah, AR_OBS_BUS_1);
+		if (reg != last_val)
+			return true;
 
+		last_val = reg;
 		if ((reg & 0x7E7FFFEF) == 0x00702400)
 			continue;
 
@@ -1556,6 +1560,8 @@ bool ath9k_hw_check_alive(struct ath_hw *ah)
 		default:
 			return true;
 		}
+
+		udelay(1);
 	} while (count-- > 0);
 
 	return false;
Signature · 1 line
1.8.3.4 (Apple Git-47)
#1 lore raw

PATCH 2/2 ath9k: fix invalid descriptor discarding

Only set sc->rx.discard_next to rx_stats->rs_more when actually discarding the current descriptor.

Also, fix a detection of broken descriptors:
First the code checks if the current descriptor is not done. Then it checks if the next descriptor is done.
Add a check that afterwards checks the first descriptor again, because it might have been completed in the mean time.

This fixes a regression introduced in
commit 723e711356b5a8a95728a890e254e8b0d47b55cf
"ath9k: fix handling of broken descriptors"

---
 drivers/net/wireless/ath/ath9k/recv.c | 70 +++++++++++++++++------------------
 1 file changed, 35 insertions(+), 35 deletions(-)
drivers/net/wireless/ath/ath9k/recv.c +35 -35
index a0ebdd0..82e340d 100644
@@ -732,11 +732,18 @@ static struct ath_rxbuf *ath_get_next_rx_buf(struct ath_softc *sc,
 			return NULL;
 
 		/*
-		 * mark descriptor as zero-length and set the 'more'
-		 * flag to ensure that both buffers get discarded
+		 * Re-check previous descriptor, in case it has been filled
+		 * in the mean time.
 		 */
-		rs->rs_datalen = 0;
-		rs->rs_more = true;
+		ret = ath9k_hw_rxprocdesc(ah, ds, rs);
+		if (ret == -EINPROGRESS) {
+			/*
+			 * mark descriptor as zero-length and set the 'more'
+			 * flag to ensure that both buffers get discarded
+			 */
+			rs->rs_datalen = 0;
+			rs->rs_more = true;
+		}
 	}
 
 	list_del(&bf->list);
@@ -985,32 +992,32 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hdr *hdr;
 	bool discard_current = sc->rx.discard_next;
-	int ret = 0;
 
 	/*
 	 * Discard corrupt descriptors which are marked in
 	 * ath_get_next_rx_buf().
 	 */
-	sc->rx.discard_next = rx_stats->rs_more;
 	if (discard_current)
-		return -EINVAL;
+		goto corrupt;
+
+	sc->rx.discard_next = false;
 
 	/*
 	 * Discard zero-length packets.
 	 */
 	if (!rx_stats->rs_datalen) {
 		RX_STAT_INC(rx_len_err);
-		return -EINVAL;
+		goto corrupt;
 	}
 
-        /*
-         * rs_status follows rs_datalen so if rs_datalen is too large
-         * we can take a hint that hardware corrupted it, so ignore
-         * those frames.
-         */
+	/*
+	 * rs_status follows rs_datalen so if rs_datalen is too large
+	 * we can take a hint that hardware corrupted it, so ignore
+	 * those frames.
+	 */
 	if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) {
 		RX_STAT_INC(rx_len_err);
-		return -EINVAL;
+		goto corrupt;
 	}
 
 	/* Only use status info from the last fragment */
@@ -1024,10 +1031,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	 * This is different from the other corrupt descriptor
 	 * condition handled above.
 	 */
-	if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) {
-		ret = -EINVAL;
-		goto exit;
-	}
+	if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
+		goto corrupt;
 
 	hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
 
@@ -1043,18 +1048,15 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
 			RX_STAT_INC(rx_spectral);
 
-		ret = -EINVAL;
-		goto exit;
+		return -EINVAL;
 	}
 
 	/*
 	 * everything but the rate is checked here, the rate check is done
 	 * separately to avoid doing two lookups for a rate for each frame.
 	 */
-	if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
-		ret = -EINVAL;
-		goto exit;
-	}
+	if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
+		return -EINVAL;
 
 	if (ath_is_mybeacon(common, hdr)) {
 		RX_STAT_INC(rx_beacons);
@@ -1064,15 +1066,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	/*
 	 * This shouldn't happen, but have a safety check anyway.
 	 */
-	if (WARN_ON(!ah->curchan)) {
-		ret = -EINVAL;
-		goto exit;
-	}
+	if (WARN_ON(!ah->curchan))
+		return -EINVAL;
 
-	if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
-		ret =-EINVAL;
-		goto exit;
-	}
+	if (ath9k_process_rate(common, hw, rx_stats, rx_status))
+		return -EINVAL;
 
 	ath9k_process_rssi(common, hw, rx_stats, rx_status);
 
@@ -1087,9 +1085,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		sc->rx.num_pkts++;
 #endif
 
-exit:
-	sc->rx.discard_next = false;
-	return ret;
+	return 0;
+
+corrupt:
+	sc->rx.discard_next = rx_stats->rs_more;
+	return -EINVAL;
 }
 
 static void ath9k_rx_skb_postprocess(struct ath_common *common,
Signature · 1 line
1.8.3.4 (Apple Git-47)