ARM: pxa: add gpio keys information
Subsystems (3)
PATCH 1/1 ARM: pxa: add gpio keys information
Switching from corgikbd to matrixkbd corgi has lost support for few switches. Readd them through gpio-keys-polled device (-polled, since scoop does not provide IRQ for GPIO).
Signed-off-by Dmitry Eremin-Solenikov <[email protected]>
--- arch/arm/mach-pxa/corgi.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
arch/arm/mach-pxa/corgi.c +40 -0
@@ -32,6 +32,7 @@#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> +#include <linux/gpio_keys.h> #include <linux/module.h> #include <video/w100fb.h>
@@ -405,6 +406,44 @@ static struct platform_device corgikbd_device = { }, }; +static struct gpio_keys_button corgi_gpio_keys[] = { + { + .type =EV_SW , + .code =SW_LID , + .gpio =CORGI_GPIO_SWA , + .desc ="Lid close switch" , + .debounce_interval =500 , + }, + { + .type =EV_SW , + .code =SW_TABLET_MODE , + .gpio =CORGI_GPIO_SWB , + .desc ="Tablet mode switch" , + .debounce_interval =500 , + }, + { + .type =EV_SW , + .code =SW_HEADPHONE_INSERT , + .gpio =CORGI_GPIO_AK_INT , + .desc ="HeadPhone insert" , + .debounce_interval =500 , + }, +}; + +static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = { + .buttons = corgi_gpio_keys, + .nbuttons =ARRAY_SIZE (corgi_gpio_keys), + .poll_interval =250 , +}; + +static struct platform_device corgi_gpio_keys_device = { + .name ="gpio-keys-polled" , + .id =-1 , + .dev = { + .platform_data = &corgi_gpio_keys_platform_data, + }, +}; +/* * Corgi LEDs */
@@ -646,6 +685,7 @@ static struct platform_device sharpsl_rom_device = {static struct platform_device *devices[]__initdata = { &corgiscoop_device, &corgifb_device, + &corgi_gpio_keys_device, &corgikbd_device, &corgiled_device, &corgi_audio_device,
Signature · 1 line
1.8.5.3
PATCH 1/1 ARM: pxa: add gpio keys information
Quoted 75 lines · Dmitry Eremin-Solenikov
Switching from corgikbd to matrixkbd corgi has lost support for few switches. Readd them through gpio-keys-polled device (-polled, since scoop does not provide IRQ for GPIO).
Signed-off-by Dmitry Eremin-Solenikov <[email protected]>--- arch/arm/mach-pxa/corgi.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)arch/arm/mach-pxa/corgi.c +40
-1@@ -32,6 +32,7 @@#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> +#include <linux/gpio_keys.h> #include <linux/module.h> #include <video/w100fb.h> @@ -405,6 +406,44 @@ static struct platform_device corgikbd_device = { }, }; +static struct gpio_keys_button corgi_gpio_keys[] = { + { + .type =EV_SW , + .code =SW_LID , + .gpio =CORGI_GPIO_SWA , + .desc ="Lid close switch" , + .debounce_interval =500 , + }, + { + .type =EV_SW , + .code =SW_TABLET_MODE , + .gpio =CORGI_GPIO_SWB , + .desc ="Tablet mode switch" , + .debounce_interval =500 , + }, + { + .type =EV_SW , + .code =SW_HEADPHONE_INSERT , + .gpio =CORGI_GPIO_AK_INT , + .desc ="HeadPhone insert" , + .debounce_interval =500 , + }, +}; + +static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = { + .buttons = corgi_gpio_keys, + .nbuttons =ARRAY_SIZE (corgi_gpio_keys), + .poll_interval =250 , +}; + +static struct platform_device corgi_gpio_keys_device = { + .name ="gpio-keys-polled" , + .id =-1 , + .dev = { + .platform_data = &corgi_gpio_keys_platform_data, + }, +}; +/* * Corgi LEDs */ @@ -646,6 +685,7 @@ static struct platform_device sharpsl_rom_device = {static struct platform_device *devices[]__initdata = { &corgiscoop_device, &corgifb_device, + &corgi_gpio_keys_device, &corgikbd_device, &corgiled_device, &corgi_audio_device, --
Quoted 2 lines
1.8.5.3
Applied
Thanks
Haojian