Bluetooth: Fix advertising address type when toggling connectable
Subsystems (2)
PATCH 1/1 Bluetooth: Fix advertising address type when toggling connectable
From: Johan Hedberg <[email protected]>
When the connectable setting is toggled using mgmt_set_connectable the HCI_CONNECTABLE flag will only be set once the related HCI commands succeed. When determining what kind of advertising to do we need to therefore also check whether there is a pending Set Connectable command in addition to the current flag value.
The enable_advertising function was already taking care of this for the advertising type with the help of the get_adv_type function, but was failing to do the same for the address type selection. This patch converts the get_adv_type function to be more generic in that it returns the expected connectable state and updates the enable_advertising function to use the return value both for the advertising type as well as the advertising address type.
--- net/bluetooth/mgmt.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
net/bluetooth/mgmt.c +7 -9
@@ -817,10 +817,9 @@ static void update_class(struct hci_request *req)hci_req_add (req,HCI_OP_WRITE_CLASS_OF_DEV ,sizeof (cod), cod); } -static u8 get_adv_type (struct hci_dev *hdev) +static bool get_connectable (struct hci_dev *hdev) {struct pending_cmd *cmd; -bool connectable;/* If there's a pending mgmt command the flag will not yet have * it's final value, so check for this first.
@@ -828,12 +827,10 @@ static u8 get_adv_type(struct hci_dev *hdev) cmd =mgmt_pending_find (MGMT_OP_SET_CONNECTABLE , hdev);if (cmd) {struct mgmt_mode *cp = cmd->param; - connectable = !!cp->val; - }else { - connectable =test_bit (HCI_CONNECTABLE , &hdev->dev_flags); +return cp->val; } -return connectable ?LE_ADV_IND :LE_ADV_NONCONN_IND ; +return test_bit (HCI_CONNECTABLE , &hdev->dev_flags); }static void enable_advertising (struct hci_request *req)
@@ -841,9 +838,10 @@ static void enable_advertising(struct hci_request *req)struct hci_dev *hdev = req->hdev;struct hci_cp_le_set_adv_param cp;u8 own_addr_type, enable =0x01 ; -bool require_privacy; +bool connectable, require_privacy; - require_privacy = !test_bit (HCI_CONNECTABLE , &hdev->dev_flags); + connectable =get_connectable (hdev); + require_privacy = !connectable;if (hci_update_random_address (req, require_privacy, &own_addr_type) <0 )return ;
@@ -851,7 +849,7 @@ static void enable_advertising(struct hci_request *req)memset (&cp,0 ,sizeof (cp)); cp.min_interval =__constant_cpu_to_le16 (0x0800 ); cp.max_interval =__constant_cpu_to_le16 (0x0800 ); - cp.type =get_adv_type (hdev); + cp.type = connectable ?LE_ADV_IND :LE_ADV_NONCONN_IND ; cp.own_address_type = own_addr_type; cp.channel_map = hdev->le_adv_channel_map;
Signature · 1 line
1.8.5.3
PATCH 1/1 Bluetooth: Fix advertising address type when toggling connectable
From: Johan Hedberg <[email protected]>
When the connectable setting is toggled using mgmt_set_connectable the HCI_CONNECTABLE flag will only be set once the related HCI commands succeed. When determining what kind of advertising to do we need to therefore also check whether there is a pending Set Connectable command in addition to the current flag value.
The enable_advertising function was already taking care of this for the advertising type with the help of the get_adv_type function, but was failing to do the same for the address type selection. This patch converts the get_adv_type function to be more generic in that it returns the expected connectable state and updates the enable_advertising function to use the return value both for the advertising type as well as the advertising address type.
--- net/bluetooth/mgmt.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
net/bluetooth/mgmt.c +7 -9
@@ -817,10 +817,9 @@ static void update_class(struct hci_request *req)hci_req_add (req,HCI_OP_WRITE_CLASS_OF_DEV ,sizeof (cod), cod); } -static u8 get_adv_type (struct hci_dev *hdev) +static bool get_connectable (struct hci_dev *hdev) {struct pending_cmd *cmd; -bool connectable;/* If there's a pending mgmt command the flag will not yet have * it's final value, so check for this first.
@@ -828,12 +827,10 @@ static u8 get_adv_type(struct hci_dev *hdev) cmd =mgmt_pending_find (MGMT_OP_SET_CONNECTABLE , hdev);if (cmd) {struct mgmt_mode *cp = cmd->param; - connectable = !!cp->val; - }else { - connectable =test_bit (HCI_CONNECTABLE , &hdev->dev_flags); +return cp->val; } -return connectable ?LE_ADV_IND :LE_ADV_NONCONN_IND ; +return test_bit (HCI_CONNECTABLE , &hdev->dev_flags); }static void enable_advertising (struct hci_request *req)
@@ -841,9 +838,10 @@ static void enable_advertising(struct hci_request *req)struct hci_dev *hdev = req->hdev;struct hci_cp_le_set_adv_param cp;u8 own_addr_type, enable =0x01 ; -bool require_privacy; +bool connectable, require_privacy; - require_privacy = !test_bit (HCI_CONNECTABLE , &hdev->dev_flags); + connectable =get_connectable (hdev); + require_privacy = !connectable;if (hci_update_random_address (req, require_privacy, &own_addr_type) <0 )return ;
@@ -851,7 +849,7 @@ static void enable_advertising(struct hci_request *req)memset (&cp,0 ,sizeof (cp)); cp.min_interval =__constant_cpu_to_le16 (0x0800 ); cp.max_interval =__constant_cpu_to_le16 (0x0800 ); - cp.type =get_adv_type (hdev); + cp.type = connectable ?LE_ADV_IND :LE_ADV_NONCONN_IND ; cp.own_address_type = own_addr_type; cp.channel_map = hdev->le_adv_channel_map;
Signature · 1 line
1.8.5.3
Marcel Holtmann
maintainerHi Johan,
Quoted 53 lines
When the connectable setting is toggled using
mgmt_set_connectabletheHCI_CONNECTABLEflag will only be set once the related HCI commands succeed. When determining what kind of advertising to do we need to therefore also check whether there is a pending Set Connectable command in addition to the current flag value.The
enable_advertisingfunction was already taking care of this for the advertising type with the help of theget_adv_typefunction, but was failing to do the same for the address type selection. This patch converts theget_adv_typefunction to be more generic in that it returns the expected connectable state and updates theenable_advertisingfunction to use the return value both for the advertising type as well as the advertising address type.Signed-off-by Johan Hedberg <[email protected]>---
net/bluetooth/mgmt.c| 16 +++++++---------1 file changed, 7 insertions(+), 9 deletions(-)net/bluetooth/mgmt.c +3
-6@@ -817,10 +817,9 @@ static void update_class(struct hci_request *req)hci_req_add (req,HCI_OP_WRITE_CLASS_OF_DEV ,sizeof (cod), cod); } -static u8 get_adv_type (struct hci_dev *hdev) +static bool get_connectable (struct hci_dev *hdev) {struct pending_cmd *cmd; -bool connectable;/* If there's a pending mgmt command the flag will not yet have * it's final value, so check for this first. @@ -828,12 +827,10 @@ static u8 get_adv_type(struct hci_dev *hdev) cmd =mgmt_pending_find (MGMT_OP_SET_CONNECTABLE , hdev);if (cmd) {struct mgmt_mode *cp = cmd->param; - connectable = !!cp->val; - }else { - connectable =test_bit (HCI_CONNECTABLE , &hdev->dev_flags); +return cp->val; } -return connectable ?LE_ADV_IND :LE_ADV_NONCONN_IND ; +return test_bit (HCI_CONNECTABLE , &hdev->dev_flags); }static void enable_advertising (struct hci_request *req)@@ -841,9 +838,10 @@ static void enable_advertising(struct hci_request *req)struct hci_dev *hdev = req->hdev;struct hci_cp_le_set_adv_param cp;
net/bluetooth/mgmt.c static void enable_advertising(struct hci_request *req) · line 847
Quoted 10 lines
net/bluetooth/mgmt.c +3
-2u8 own_addr_type, enable =0x01 ; -bool require_privacy; +bool connectable, require_privacy; - require_privacy = !test_bit (HCI_CONNECTABLE , &hdev->dev_flags); + connectable =get_connectable (hdev); + require_privacy = !connectable;if (hci_update_random_address (req, require_privacy, &own_addr_type) <0 )return ;
can we use a comment here to explain require_privacy like we do with the other time it is used. the two variables are too much. And then call it like this ..address(req, !connectable, &own..).
Regards
Marcel
Hi Marcel,
Quoted 7 lines · Marcel Holtmann
Quoted 7 lines
net/bluetooth/mgmt.c +3
-2-bool require_privacy; +bool connectable, require_privacy; - require_privacy = !test_bit (HCI_CONNECTABLE , &hdev->dev_flags); + connectable =get_connectable (hdev); + require_privacy = !connectable;
Quoted 6 lines
Quoted 2 lines
if (hci_update_random_address(req, require_privacy, &own_addr_type) < 0) return;can we use a comment here to explain
require_privacylike we do with the other time it is used. the two variables are too much. And then call it like this ..address(req, !connectable, &own..).
Sure. v2 coming in a few minutes.
Johan