ARM: kirkwood: select dtbs based on SoC
PATCH 1/1 ARM: kirkwood: select dtbs based on SoC
To prevent problems later with mvebu_v5_defconfig builds, we restrict the scope of the changes this series makes.
Selecting ARCH_KIRKWOOD and MACH_KIRKWOOD is necessary during the migration from mach-kirkwood to mach-mvebu. Until the last four legacy kirkwood board files have a DT equivalent, we need to support building DT from both mach-kirkwood and mach-mvebu.
---
If there are no complaints, I'll be applying this on top of Andrew's kirkwood migration series in mvebu/soc-kw
arch/arm/boot/dts/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/Makefile +2 -2
@@ -117,6 +117,7 @@ kirkwood := \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
@@ -133,8 +134,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-xp-gp.dtb \ armada-xp-netgear-rn2120.dtb \ armada-xp-matrix.dtb \ - armada-xp-openblocks-ax3-4.dtb \ - $(kirkwood) + armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \
Signature · 1 line
1.9.0
PATCH RESEND 1/1 ARM: kirkwood: select dtbs based on SoC
To prevent problems later with mvebu_v5_defconfig builds, we restrict the scope of the changes this series makes.
Selecting ARCH_KIRKWOOD and MACH_KIRKWOOD is necessary during the migration from mach-kirkwood to mach-mvebu. Until the last four legacy kirkwood board files have a DT equivalent, we need to support building DT from both mach-kirkwood and mach-mvebu.
---
Sorry, forgot to include Kevin in the To:
If there are no complaints, I'll be applying this on top of Andrew's kirkwood migration series in mvebu/soc-kw
arch/arm/boot/dts/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/Makefile +2 -2
@@ -117,6 +117,7 @@ kirkwood := \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) +dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
@@ -133,8 +134,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-xp-gp.dtb \ armada-xp-netgear-rn2120.dtb \ armada-xp-matrix.dtb \ - armada-xp-openblocks-ax3-4.dtb \ - $(kirkwood) + armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \
Signature · 1 line
1.9.0
Jason Cooper
AppliedPATCH 1/1 ARM: kirkwood: select dtbs based on SoC
In reply to Jason CooperQuoted 8 lines · Jason Cooper
To prevent problems later with
mvebu_v5_defconfigbuilds, we restrict the scope of the changes this series makes.Selecting
ARCH_KIRKWOODandMACH_KIRKWOODis necessary during the migration from mach-kirkwood to mach-mvebu. Until the last four legacy kirkwood board files have a DT equivalent, we need to support building DT from both mach-kirkwood and mach-mvebu.
Quoted 8 lines
Reported-by Kevin Hilman <[email protected]>Signed-off-by Jason Cooper <[email protected]>---
If there are no complaints, I'll be applying this on top of Andrew's kirkwood migration series in mvebu/soc-kwarch/arm/boot/dts/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Applied to mvebu/soc-kw with Kevin's Ack.
thx,
Jason.