Skip to contentSkip to conversation

dm-multipath: push back requests instead of queueing

PATCH Superseded Hannes Reinecke 3 participants 21 messages Feb 27, 2014 – Feb 28, 2014 Device mapper

v8 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v8 cover dm-multipath: push back requests instead of queueing

Hi Mike,

here's now version 8 of the patchset; after testing I found that the contentious delay when queueing items to a workqueue is in fact not required. So with that I seem to have addressed all outstanding issues.

Hannes Reinecke (6):
dm mpath: do not call pg_init when it is already running dm mpath: push back requests instead of queueing dm mpath: remove process_queued_ios()
dm mpath: reduce memory pressure when requeuing dm mpath: remove map_io()
dm-mpath: do not activate failed paths

Mike Snitzer (2):
dm table: add dm_table_run_md_queue_async
dm mpath: remove extra nesting in map function

 drivers/md/dm-mpath.c         | 212 +++++++++++++++---------------------------
 drivers/md/dm-table.c         |  19 ++++
 drivers/md/dm.c               |   5 +
 drivers/md/dm.h               |   1 +
 include/linux/device-mapper.h |   5 +
 5 files changed, 104 insertions(+), 138 deletions(-)
Signature · 1 line
1.7.12.4
#1 lore raw

PATCH v8 1/8 dm mpath: do not call pg_init when it is already running

This patch moves condition checks as a preparation of following patches and has no effect on behaviour. process_queued_ios() is the only caller of __pg_init_all_paths() and 2 condition checks are moved from outside to inside without side effects.

---
 drivers/md/dm-mpath.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +4 -2
index e8431fb..bb2f6b2 100644
@@ -261,6 +261,9 @@ static void __pg_init_all_paths(struct multipath *m)
 	struct pgpath *pgpath;
 	unsigned long pg_init_delay = 0;
 
+	if (m->pg_init_in_progress || m->pg_init_disabled)
+		return;
+
 	m->pg_init_count++;
 	m->pg_init_required = 0;
 	if (m->pg_init_delay_retry)
@@ -501,8 +504,7 @@ static void process_queued_ios(struct work_struct *work)
 	    (!pgpath && !m->queue_if_no_path))
 		must_queue = 0;
 
-	if (m->pg_init_required && !m->pg_init_in_progress && pgpath &&
-	    !m->pg_init_disabled)
+	if (pgpath && m->pg_init_required)
 		__pg_init_all_paths(m);
 
 	spin_unlock_irqrestore(&m->lock, flags);
Signature · 1 line
1.7.12.4
#2 lore raw

PATCH v8 2/8 dm table: add dm_table_run_md_queue_async

In reply to Hannes Reinecke

From: Mike Snitzer <[email protected]>

Introduce dm_table_run_md_queue_async() to run the request_queue of the mapped_device associated with a request-based DM table.

Also add dm_md_get_queue() wrapper to extract the request_queue from a mapped_device.

---
 drivers/md/dm-table.c         | 19 +++++++++++++++++++
 drivers/md/dm.c               |  5 +++++
 drivers/md/dm.h               |  1 +
 include/linux/device-mapper.h |  5 +++++
 4 files changed, 30 insertions(+)
drivers/md/dm-table.c +19 -0
index 6a7f2b8..8df63ed 100644
@@ -1618,6 +1618,25 @@ struct mapped_device *dm_table_get_md(struct dm_table *t)
 }
 EXPORT_SYMBOL(dm_table_get_md);
 
+void dm_table_run_md_queue_async(struct dm_table *t)
+{
+	struct mapped_device *md;
+	struct request_queue *queue;
+	unsigned long flags;
+
+	if (!dm_table_request_based(t))
+		return;
+
+	md = dm_table_get_md(t);
+	queue = dm_get_md_queue(md);
+	if (queue) {
+		spin_lock_irqsave(queue->queue_lock, flags);
+		blk_run_queue_async(queue);
+		spin_unlock_irqrestore(queue->queue_lock, flags);
+	}
+}
+EXPORT_SYMBOL(dm_table_run_md_queue_async);
+
 static int device_discard_capable(struct dm_target *ti, struct dm_dev *dev,
 				  sector_t start, sector_t len, void *data)
 {
drivers/md/dm.c +5 -0
index 8c53b09..341991f 100644
@@ -475,6 +475,11 @@ sector_t dm_get_size(struct mapped_device *md)
 	return get_capacity(md->disk);
 }
 
+struct request_queue *dm_get_md_queue(struct mapped_device *md)
+{
+	return md->queue;
+}
+
 struct dm_stats *dm_get_stats(struct mapped_device *md)
 {
 	return &md->stats;
drivers/md/dm.h +1 -0
index c4569f0..1b2ca8a 100644
@@ -189,6 +189,7 @@ int dm_lock_for_deletion(struct mapped_device *md, bool mark_deferred, bool only
 int dm_cancel_deferred_remove(struct mapped_device *md);
 int dm_request_based(struct mapped_device *md);
 sector_t dm_get_size(struct mapped_device *md);
+struct request_queue *dm_get_md_queue(struct mapped_device *md);
 struct dm_stats *dm_get_stats(struct mapped_device *md);
 
 int dm_kobject_uevent(struct mapped_device *md, enum kobject_action action,
include/linux/device-mapper.h +5 -0
index ed419c6..250225b 100644
@@ -466,6 +466,11 @@ struct mapped_device *dm_table_get_md(struct dm_table *t);
 void dm_table_event(struct dm_table *t);
 
 /*
+ * Run the queue for request-based targets.
+ */
+void dm_table_run_md_queue_async(struct dm_table *t);
+
+/*
  * The device must be suspended before calling this method.
  * Returns the previous table, which the caller must destroy.
  */
Signature · 1 line
1.7.12.4
#3 lore raw

PATCH v8 3/8 dm mpath: push back requests instead of queueing

In reply to Hannes Reinecke

There is no reason why multipath needs to queue requests internally for queue_if_no_path or pg_init; we should rather push them back onto the request queue.

And while we're at it we can simplify the conditional statement in map_io() to make it easier to read.

Since mpath no longer does internal queuing of I/O the table info no longer emits the internal queue_size. Instead it displays 1 if queuing is being used or 0 if it is not.

---
 drivers/md/dm-mpath.c | 114 ++++++++++++++++----------------------------------
 1 file changed, 36 insertions(+), 78 deletions(-)
drivers/md/dm-mpath.c +36 -78
index bb2f6b2..1c6ca5c 100644
@@ -93,9 +93,7 @@ struct multipath {
 	unsigned pg_init_count;		/* Number of times pg_init called */
 	unsigned pg_init_delay_msecs;	/* Number of msecs before pg_init retry */
 
-	unsigned queue_size;
 	struct work_struct process_queued_ios;
-	struct list_head queued_ios;
 
 	struct work_struct trigger_event;
 
@@ -124,6 +122,7 @@ static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
 static void process_queued_ios(struct work_struct *work);
 static void trigger_event(struct work_struct *work);
 static void activate_path(struct work_struct *work);
+static int __pgpath_busy(struct pgpath *pgpath);
 
 
 /*-----------------------------------------------
@@ -195,7 +194,6 @@ static struct multipath *alloc_multipath(struct dm_target *ti)
 	m = kzalloc(sizeof(*m), GFP_KERNEL);
 	if (m) {
 		INIT_LIST_HEAD(&m->priority_groups);
-		INIT_LIST_HEAD(&m->queued_ios);
 		spin_lock_init(&m->lock);
 		m->queue_io = 1;
 		m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT;
@@ -368,12 +366,15 @@ failed:
  */
 static int __must_push_back(struct multipath *m)
 {
-	return (m->queue_if_no_path != m->saved_queue_if_no_path &&
-		dm_noflush_suspending(m->ti));
+	return (m->queue_if_no_path ||
+		(m->queue_if_no_path != m->saved_queue_if_no_path &&
+		 dm_noflush_suspending(m->ti)));
 }
 
+#define pg_ready(m) (!(m)->queue_io && !(m)->pg_init_required)
+
 static int map_io(struct multipath *m, struct request *clone,
-		  union map_info *map_context, unsigned was_queued)
+		  union map_info *map_context)
 {
 	int r = DM_MAPIO_REMAPPED;
 	size_t nr_bytes = blk_rq_bytes(clone);
@@ -391,37 +392,28 @@ static int map_io(struct multipath *m, struct request *clone,
 
 	pgpath = m->current_pgpath;
 
-	if (was_queued)
-		m->queue_size--;
-
-	if (m->pg_init_required) {
-		if (!m->pg_init_in_progress)
-			queue_work(kmultipathd, &m->process_queued_ios);
-		r = DM_MAPIO_REQUEUE;
-	} else if ((pgpath && m->queue_io) ||
-		   (!pgpath && m->queue_if_no_path)) {
-		/* Queue for the daemon to resubmit */
-		list_add_tail(&clone->queuelist, &m->queued_ios);
-		m->queue_size++;
-		if (!m->queue_io)
-			queue_work(kmultipathd, &m->process_queued_ios);
-		pgpath = NULL;
-		r = DM_MAPIO_SUBMITTED;
-	} else if (pgpath) {
-		bdev = pgpath->path.dev->bdev;
-		clone->q = bdev_get_queue(bdev);
-		clone->rq_disk = bdev->bd_disk;
-	} else if (__must_push_back(m))
-		r = DM_MAPIO_REQUEUE;
-	else
-		r = -EIO;	/* Failed */
-
-	mpio->pgpath = pgpath;
-	mpio->nr_bytes = nr_bytes;
-
-	if (r == DM_MAPIO_REMAPPED && pgpath->pg->ps.type->start_io)
-		pgpath->pg->ps.type->start_io(&pgpath->pg->ps, &pgpath->path,
-					      nr_bytes);
+	if (pgpath) {
+		if (pg_ready(m)) {
+			bdev = pgpath->path.dev->bdev;
+			clone->q = bdev_get_queue(bdev);
+			clone->rq_disk = bdev->bd_disk;
+			mpio->pgpath = pgpath;
+			mpio->nr_bytes = nr_bytes;
+			if (pgpath->pg->ps.type->start_io)
+				pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
+							      &pgpath->path,
+							      nr_bytes);
+		} else {
+			__pg_init_all_paths(m);
+			r = DM_MAPIO_REQUEUE;
+		}
+	} else {
+		/* No path */
+		if (__must_push_back(m))
+			r = DM_MAPIO_REQUEUE;
+		else
+			r = -EIO;	/* Failed */
+	}
 
 	spin_unlock_irqrestore(&m->lock, flags);
 
@@ -443,7 +435,7 @@ static int queue_if_no_path(struct multipath *m, unsigned queue_if_no_path,
 	else
 		m->saved_queue_if_no_path = queue_if_no_path;
 	m->queue_if_no_path = queue_if_no_path;
-	if (!m->queue_if_no_path && m->queue_size)
+	if (!m->queue_if_no_path)
 		queue_work(kmultipathd, &m->process_queued_ios);
 
 	spin_unlock_irqrestore(&m->lock, flags);
@@ -451,40 +443,6 @@ static int queue_if_no_path(struct multipath *m, unsigned queue_if_no_path,
 	return 0;
 }
 
-/*-----------------------------------------------------------------
- * The multipath daemon is responsible for resubmitting queued ios.
- *---------------------------------------------------------------*/
-
-static void dispatch_queued_ios(struct multipath *m)
-{
-	int r;
-	unsigned long flags;
-	union map_info *info;
-	struct request *clone, *n;
-	LIST_HEAD(cl);
-
-	spin_lock_irqsave(&m->lock, flags);
-	list_splice_init(&m->queued_ios, &cl);
-	spin_unlock_irqrestore(&m->lock, flags);
-
-	list_for_each_entry_safe(clone, n, &cl, queuelist) {
-		list_del_init(&clone->queuelist);
-
-		info = dm_get_rq_mapinfo(clone);
-
-		r = map_io(m, clone, info, 1);
-		if (r < 0) {
-			clear_mapinfo(m, info);
-			dm_kill_unmapped_request(clone, r);
-		} else if (r == DM_MAPIO_REMAPPED)
-			dm_dispatch_request(clone);
-		else if (r == DM_MAPIO_REQUEUE) {
-			clear_mapinfo(m, info);
-			dm_requeue_unmapped_request(clone);
-		}
-	}
-}
-
 static void process_queued_ios(struct work_struct *work)
 {
 	struct multipath *m =
@@ -509,7 +467,7 @@ static void process_queued_ios(struct work_struct *work)
 
 	spin_unlock_irqrestore(&m->lock, flags);
 	if (!must_queue)
-		dispatch_queued_ios(m);
+		dm_table_run_md_queue_async(m->ti->table);
 }
 
 /*
@@ -987,7 +945,7 @@ static int multipath_map(struct dm_target *ti, struct request *clone,
 		return DM_MAPIO_REQUEUE;
 
 	clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
-	r = map_io(m, clone, map_context, 0);
+	r = map_io(m, clone, map_context);
 	if (r < 0 || r == DM_MAPIO_REQUEUE)
 		clear_mapinfo(m, map_context);
 
@@ -1056,7 +1014,7 @@ static int reinstate_path(struct pgpath *pgpath)
 
 	pgpath->is_active = 1;
 
-	if (!m->nr_valid_paths++ && m->queue_size) {
+	if (!m->nr_valid_paths++) {
 		m->current_pgpath = NULL;
 		queue_work(kmultipathd, &m->process_queued_ios);
 	} else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
@@ -1435,7 +1393,7 @@ static void multipath_status(struct dm_target *ti, status_type_t type,
 
 	/* Features */
 	if (type == STATUSTYPE_INFO)
-		DMEMIT("2 %u %u ", m->queue_size, m->pg_init_count);
+		DMEMIT("2 %u %u ", m->queue_io, m->pg_init_count);
 	else {
 		DMEMIT("%u ", m->queue_if_no_path +
 			      (m->pg_init_retries > 0) * 2 +
@@ -1688,7 +1646,7 @@ static int multipath_busy(struct dm_target *ti)
 	spin_lock_irqsave(&m->lock, flags);
 
 	/* pg_init in progress, requeue until done */
-	if (m->pg_init_in_progress) {
+	if (!pg_ready(m)) {
 		busy = 1;
 		goto out;
 	}
@@ -1741,7 +1699,7 @@ out:
  *---------------------------------------------------------------*/
 static struct target_type multipath_target = {
 	.name = "multipath",
-	.version = {1, 6, 0},
+	.version = {1, 7, 0},
 	.module = THIS_MODULE,
 	.ctr = multipath_ctr,
 	.dtr = multipath_dtr,
Signature · 1 line
1.7.12.4
#4 lore raw

PATCH v8 4/8 dm mpath: remove process_queued_ios()

In reply to Hannes Reinecke

process_queued_ios() has served 3 functions:
1) select pg and pgpath if none is selected
2) start pg_init if requested
3) dispatch queued IOs when pg is ready

Basically, a call to queue_work(process_queued_ios) can be replaced by dm_table_run_md_queue_async(), which runs request queue and ends up calling map_io(), which does 1), 2) and 3).

Exception is when !pg_ready() (which means either pg_init is running or requested), then multipath_busy() prevents map_io() being called from request_fn.

If pg_init is running, it should be ok as long as pg_init_done() does the right thing when pg_init is completed, I.e.: restart pg_init if !pg_ready() or call dm_table_run_md_queue_async() to kick map_io().

If pg_init is requested, we have to make sure the request is detected and pg_init will be started. pg_init is requested in 3 places:
a) __choose_pgpath() in map_io()
b) __choose_pgpath() in multipath_ioctl()
c) pg_init retry in pg_init_done()
a) is ok because map_io() calls __pg_init_all_paths(), which does 2).
b) needs a call to __pg_init_all_paths(), which does 2).
c) needs a call to __pg_init_all_paths(), which does 2).

So this patch removes process_queued_ios() and ensures that __pg_init_all_paths() is called at the appropriate locations.

---
 drivers/md/dm-mpath.c | 66 ++++++++++++++++++++-------------------------------
 1 file changed, 26 insertions(+), 40 deletions(-)
drivers/md/dm-mpath.c +26 -40
index 1c6ca5c..7549b78 100644
@@ -93,8 +93,6 @@ struct multipath {
 	unsigned pg_init_count;		/* Number of times pg_init called */
 	unsigned pg_init_delay_msecs;	/* Number of msecs before pg_init retry */
 
-	struct work_struct process_queued_ios;
-
 	struct work_struct trigger_event;
 
 	/*
@@ -119,7 +117,6 @@ typedef int (*action_fn) (struct pgpath *pgpath);
 static struct kmem_cache *_mpio_cache;
 
 static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
-static void process_queued_ios(struct work_struct *work);
 static void trigger_event(struct work_struct *work);
 static void activate_path(struct work_struct *work);
 static int __pgpath_busy(struct pgpath *pgpath);
@@ -197,7 +194,6 @@ static struct multipath *alloc_multipath(struct dm_target *ti)
 		spin_lock_init(&m->lock);
 		m->queue_io = 1;
 		m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT;
-		INIT_WORK(&m->process_queued_ios, process_queued_ios);
 		INIT_WORK(&m->trigger_event, trigger_event);
 		init_waitqueue_head(&m->pg_init_wait);
 		mutex_init(&m->work_mutex);
@@ -254,16 +250,21 @@ static void clear_mapinfo(struct multipath *m, union map_info *info)
  * Path selection
  *-----------------------------------------------*/
 
-static void __pg_init_all_paths(struct multipath *m)
+static int __pg_init_all_paths(struct multipath *m)
 {
 	struct pgpath *pgpath;
 	unsigned long pg_init_delay = 0;
 
 	if (m->pg_init_in_progress || m->pg_init_disabled)
-		return;
+		return 0;
 
 	m->pg_init_count++;
 	m->pg_init_required = 0;
+
+	/* Check here to reset pg_init_required */
+	if (!m->current_pg)
+		return 0;
+
 	if (m->pg_init_delay_retry)
 		pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ?
 						 m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS);
@@ -275,6 +276,7 @@ static void __pg_init_all_paths(struct multipath *m)
 				       pg_init_delay))
 			m->pg_init_in_progress++;
 	}
+	return m->pg_init_in_progress;
 }
 
 static void __switch_pg(struct multipath *m, struct pgpath *pgpath)
@@ -436,40 +438,13 @@ static int queue_if_no_path(struct multipath *m, unsigned queue_if_no_path,
 		m->saved_queue_if_no_path = queue_if_no_path;
 	m->queue_if_no_path = queue_if_no_path;
 	if (!m->queue_if_no_path)
-		queue_work(kmultipathd, &m->process_queued_ios);
+		dm_table_run_md_queue_async(m->ti->table);
 
 	spin_unlock_irqrestore(&m->lock, flags);
 
 	return 0;
 }
 
-static void process_queued_ios(struct work_struct *work)
-{
-	struct multipath *m =
-		container_of(work, struct multipath, process_queued_ios);
-	struct pgpath *pgpath = NULL;
-	unsigned must_queue = 1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&m->lock, flags);
-
-	if (!m->current_pgpath)
-		__choose_pgpath(m, 0);
-
-	pgpath = m->current_pgpath;
-
-	if ((pgpath && !m->queue_io) ||
-	    (!pgpath && !m->queue_if_no_path))
-		must_queue = 0;
-
-	if (pgpath && m->pg_init_required)
-		__pg_init_all_paths(m);
-
-	spin_unlock_irqrestore(&m->lock, flags);
-	if (!must_queue)
-		dm_table_run_md_queue_async(m->ti->table);
-}
-
 /*
  * An event is triggered whenever a path is taken out of use.
  * Includes path failure and PG bypass.
@@ -1016,7 +991,7 @@ static int reinstate_path(struct pgpath *pgpath)
 
 	if (!m->nr_valid_paths++) {
 		m->current_pgpath = NULL;
-		queue_work(kmultipathd, &m->process_queued_ios);
+		dm_table_run_md_queue_async(m->ti->table);
 	} else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
 		if (queue_work(kmpath_handlerd, &pgpath->activate_path.work))
 			m->pg_init_in_progress++;
@@ -1214,9 +1189,11 @@ static void pg_init_done(void *data, int errors)
 
 	if (!m->pg_init_required)
 		m->queue_io = 0;
-
-	m->pg_init_delay_retry = delay_retry;
-	queue_work(kmultipathd, &m->process_queued_ios);
+	else if (m->current_pg) {
+		m->pg_init_delay_retry = delay_retry;
+		if (__pg_init_all_paths(m))
+			goto out;
+	}
 
 	/*
 	 * Wake up any thread waiting to suspend.
@@ -1594,8 +1571,17 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
 			r = err;
 	}
 
-	if (r == -ENOTCONN && !fatal_signal_pending(current))
-		queue_work(kmultipathd, &m->process_queued_ios);
+	if (r == -ENOTCONN && !fatal_signal_pending(current)) {
+		spin_lock_irqsave(&m->lock, flags);
+		if (!m->current_pg) {
+			/* Path status changed, redo selection */
+			__choose_pgpath(m, 0);
+		}
+		if (m->pg_init_required)
+			__pg_init_all_paths(m);
+		spin_unlock_irqrestore(&m->lock, flags);
+		dm_table_run_md_queue_async(m->ti->table);
+	}
 
 	return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 }
Signature · 1 line
1.7.12.4
#5 lore raw

Re: [PATCH 4/8] dm mpath: remove process_queued_ios()

drivers/md/dm-mpath.c static void pg_init_done(void *data, int errors) · line 1196

Quoted 12 lines · Hannes Reinecke
drivers/md/dm-mpath.c +5 -3
@@ -1214,9 +1189,11 @@ static void pg_init_done(void *data, int errors)
 
 	if (!m->pg_init_required)
 		m->queue_io = 0;
-
-	m->pg_init_delay_retry = delay_retry;
-	queue_work(kmultipathd, &m->process_queued_ios);
+	else if (m->current_pg) {
+		m->pg_init_delay_retry = delay_retry;
+		if (__pg_init_all_paths(m))
+			goto out;
+	}

As I commented before:
https://www.redhat.com/archives/dm-devel/2014-February/msg00013.html

I think the code here should clear queue_io like this when retry was requested but wasn't done:

	if (m->pg_init_required) {
		m->pg_init_delay_retry = delay_retry;
		if (__pg_init_all_paths(m))
			goto out;
	}
	m->queue_io = 0;

Otherwise, if __pg_init_all_paths() returns 0, m->queue_io will remain as "1" and nobody will clear it.

Signature · 1 line
Jun'ichi Nomura, NEC Corporation
#6 lore raw

Re: [PATCH 4/8] dm mpath: remove process_queued_ios()

Quoted 27 lines · Junichi Nomura

drivers/md/dm-mpath.c static void pg_init_done(void *data, int errors) · line 1196

Quoted 12 lines · Hannes Reinecke
drivers/md/dm-mpath.c +5 -3
@@ -1214,9 +1189,11 @@ static void pg_init_done(void *data, int errors)
 
 	if (!m->pg_init_required)
 		m->queue_io = 0;
-
-	m->pg_init_delay_retry = delay_retry;
-	queue_work(kmultipathd, &m->process_queued_ios);
+	else if (m->current_pg) {
+		m->pg_init_delay_retry = delay_retry;
+		if (__pg_init_all_paths(m))
+			goto out;
+	}

As I commented before:
https://www.redhat.com/archives/dm-devel/2014-February/msg00013.html

I think the code here should clear queue_io like this when retry was requested but wasn't done:

	if (m->pg_init_required) {
		m->pg_init_delay_retry = delay_retry;
		if (__pg_init_all_paths(m))
			goto out;
	}
	m->queue_io = 0;
Quoted 3 lines

Otherwise, if __pg_init_all_paths() returns 0, m->queue_io will remain as "1" and nobody will clear it.

You are right. Will be fixing it up.

Thanks for the review.

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
#7 lore raw

PATCH v8 5/8 dm mpath: reduce memory pressure when requeuing

In reply to Hannes Reinecke

When multipath needs to requeue I/O in the block layer the per-request context shouldn't be allocated, as it will be freed immediately afterwards anyway. Avoiding this memory allocation will reduce memory pressure during requeuing.

---
 drivers/md/dm-mpath.c | 38 +++++++++++++++-----------------------
 1 file changed, 15 insertions(+), 23 deletions(-)
drivers/md/dm-mpath.c +15 -23
index 7549b78..b4c7e7a 100644
@@ -378,12 +378,12 @@ static int __must_push_back(struct multipath *m)
 static int map_io(struct multipath *m, struct request *clone,
 		  union map_info *map_context)
 {
-	int r = DM_MAPIO_REMAPPED;
+	int r = DM_MAPIO_REQUEUE;
 	size_t nr_bytes = blk_rq_bytes(clone);
 	unsigned long flags;
 	struct pgpath *pgpath;
 	struct block_device *bdev;
-	struct dm_mpath_io *mpio = map_context->ptr;
+	struct dm_mpath_io *mpio;
 
 	spin_lock_irqsave(&m->lock, flags);
 
@@ -396,27 +396,29 @@ static int map_io(struct multipath *m, struct request *clone,
 
 	if (pgpath) {
 		if (pg_ready(m)) {
+			if (set_mapinfo(m, map_context) < 0)
+				/* ENOMEM, requeue */
+				goto out_unlock;
+
 			bdev = pgpath->path.dev->bdev;
 			clone->q = bdev_get_queue(bdev);
 			clone->rq_disk = bdev->bd_disk;
+			clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
+			mpio = map_context->ptr;
 			mpio->pgpath = pgpath;
 			mpio->nr_bytes = nr_bytes;
 			if (pgpath->pg->ps.type->start_io)
 				pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
 							      &pgpath->path,
 							      nr_bytes);
-		} else {
-			__pg_init_all_paths(m);
-			r = DM_MAPIO_REQUEUE;
+			r = DM_MAPIO_REMAPPED;
+			goto out_unlock;
 		}
-	} else {
-		/* No path */
-		if (__must_push_back(m))
-			r = DM_MAPIO_REQUEUE;
-		else
-			r = -EIO;	/* Failed */
-	}
+		__pg_init_all_paths(m);
+	} else if (!__must_push_back(m))
+		r = -EIO;	/* Failed */
 
+out_unlock:
 	spin_unlock_irqrestore(&m->lock, flags);
 
 	return r;
@@ -912,19 +914,9 @@ static void multipath_dtr(struct dm_target *ti)
 static int multipath_map(struct dm_target *ti, struct request *clone,
 			 union map_info *map_context)
 {
-	int r;
 	struct multipath *m = (struct multipath *) ti->private;
 
-	if (set_mapinfo(m, map_context) < 0)
-		/* ENOMEM, requeue */
-		return DM_MAPIO_REQUEUE;
-
-	clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
-	r = map_io(m, clone, map_context);
-	if (r < 0 || r == DM_MAPIO_REQUEUE)
-		clear_mapinfo(m, map_context);
-
-	return r;
+	return map_io(m, clone, map_context);
 }
 
 /*
Signature · 1 line
1.7.12.4
#8 lore raw

PATCH v8 6/8 dm mpath: remove map_io()

In reply to Hannes Reinecke

multipath_map() is now just a wrapper around map_io(), so we can rename map_io() to multipath_map().

---
 drivers/md/dm-mpath.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/md/dm-mpath.c +6 -13
index b4c7e7a..35bf4d7 100644
@@ -375,9 +375,13 @@ static int __must_push_back(struct multipath *m)
 
 #define pg_ready(m) (!(m)->queue_io && !(m)->pg_init_required)
 
-static int map_io(struct multipath *m, struct request *clone,
-		  union map_info *map_context)
+/*
+ * Map cloned requests
+ */
+static int multipath_map(struct dm_target *ti, struct request *clone,
+			 union map_info *map_context)
 {
+	struct multipath *m = (struct multipath *) ti->private;
 	int r = DM_MAPIO_REQUEUE;
 	size_t nr_bytes = blk_rq_bytes(clone);
 	unsigned long flags;
@@ -909,17 +913,6 @@ static void multipath_dtr(struct dm_target *ti)
 }
 
 /*
- * Map cloned requests
- */
-static int multipath_map(struct dm_target *ti, struct request *clone,
-			 union map_info *map_context)
-{
-	struct multipath *m = (struct multipath *) ti->private;
-
-	return map_io(m, clone, map_context);
-}
-
-/*
  * Take a path out of use.
  */
 static int fail_path(struct pgpath *pgpath)
Signature · 1 line
1.7.12.4
#10 lore raw

PATCH v8 7/8 dm mpath: remove extra nesting in map function

In reply to Hannes Reinecke

From: Mike Snitzer <[email protected]>

Return early for case when no path exists, and when the pathgroup isn't ready. This eliminates the need for extra nesting for the the common case.

---
 drivers/md/dm-mpath.c | 46 ++++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 22 deletions(-)
drivers/md/dm-mpath.c +24 -22
index 35bf4d7..0a40fa9 100644
@@ -398,29 +398,31 @@ static int multipath_map(struct dm_target *ti, struct request *clone,
 
 	pgpath = m->current_pgpath;
 
-	if (pgpath) {
-		if (pg_ready(m)) {
-			if (set_mapinfo(m, map_context) < 0)
-				/* ENOMEM, requeue */
-				goto out_unlock;
-
-			bdev = pgpath->path.dev->bdev;
-			clone->q = bdev_get_queue(bdev);
-			clone->rq_disk = bdev->bd_disk;
-			clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
-			mpio = map_context->ptr;
-			mpio->pgpath = pgpath;
-			mpio->nr_bytes = nr_bytes;
-			if (pgpath->pg->ps.type->start_io)
-				pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
-							      &pgpath->path,
-							      nr_bytes);
-			r = DM_MAPIO_REMAPPED;
-			goto out_unlock;
-		}
+	if (!pgpath) {
+		if (!__must_push_back(m))
+			r = -EIO;	/* Failed */
+		goto out_unlock;
+	}
+	if (!pg_ready(m)) {
 		__pg_init_all_paths(m);
-	} else if (!__must_push_back(m))
-		r = -EIO;	/* Failed */
+		goto out_unlock;
+	}
+	if (set_mapinfo(m, map_context) < 0)
+		/* ENOMEM, requeue */
+		goto out_unlock;
+
+	bdev = pgpath->path.dev->bdev;
+	clone->q = bdev_get_queue(bdev);
+	clone->rq_disk = bdev->bd_disk;
+	clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
+	mpio = map_context->ptr;
+	mpio->pgpath = pgpath;
+	mpio->nr_bytes = nr_bytes;
+	if (pgpath->pg->ps.type->start_io)
+		pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
+					      &pgpath->path,
+					      nr_bytes);
+	r = DM_MAPIO_REMAPPED;
 
 out_unlock:
 	spin_unlock_irqrestore(&m->lock, flags);
Signature · 1 line
1.7.12.4
#11 lore raw

PATCH v8 8/8 dm-mpath: do not activate failed paths

In reply to Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +5 -2
index 0a40fa9..22e7365 100644
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);
 }
 
 static int noretry_error(int error)
Signature · 1 line
1.7.12.4
#12 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

Signature · 1 line
Jun'ichi Nomura, NEC Corporation
#13 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 27 lines · Junichi Nomura
Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

Quoted 4 lines

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

activate_path() is run from a workqueue, so there is a race window between the check ->is_active in __pg_init_all_paths() and the time the scsi_dh_activate() is executed. And as activate_path)() is run without any locks we don't have any synchronization with fail_path(). So it's well possible that a path gets failed in between __pg_init_all_paths() and activate_paths().
Granted, we could remove the check for ->is_active in __pg_init_all_paths(), but I wanted to avoid scheduling a workqueue item which is known to be failing.

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
#14 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 32 lines · Hannes Reinecke
Quoted 27 lines · Junichi Nomura
Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

Quoted 4 lines

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

Quoted 6 lines

activate_path() is run from a workqueue, so there is a race window between the check ->is_active in __pg_init_all_paths() and the time the scsi_dh_activate() is executed. And as activate_path)() is run without any locks we don't have any synchronization with fail_path(). So it's well possible that a path gets failed in between __pg_init_all_paths() and activate_paths().

What I pointed is that your patch makes the window very small but doesn't close it.
If the race is a problem, this patch doesn't fix the problem.

Signature · 1 line
Jun'ichi Nomura, NEC Corporation
#15 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 40 lines · Junichi Nomura
Quoted 32 lines · Hannes Reinecke
Quoted 27 lines · Junichi Nomura
Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

Quoted 4 lines

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

Quoted 6 lines

activate_path() is run from a workqueue, so there is a race window between the check ->is_active in __pg_init_all_paths() and the time the scsi_dh_activate() is executed. And as activate_path)() is run without any locks we don't have any synchronization with fail_path(). So it's well possible that a path gets failed in between __pg_init_all_paths() and activate_paths().

Quoted 4 lines

What I pointed is that your patch makes the window very small but doesn't close it.
If the race is a problem, this patch doesn't fix the problem.

True. As said I just want to avoid unnecessary overhead by calling functions which are known to be failing.
This patch actually makes more sense in combination with the 'accept failed paths' patch, where it's much more likely to trigger. So if you insist I could move it over to there.

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
#16 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 41 lines · Hannes Reinecke
Quoted 40 lines · Junichi Nomura
Quoted 38 lines · Hannes Reinecke
Quoted 27 lines · Junichi Nomura
Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

Quoted 4 lines

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

activate_path() is run from a workqueue, so there is a race window between the check ->is_active in __pg_init_all_paths() and the time the scsi_dh_activate() is executed. And as activate_path)() is run without any locks we don't have any synchronization with fail_path(). So it's well possible that a path gets failed in between __pg_init_all_paths() and activate_paths().

Quoted 6 lines
Quoted 4 lines

What I pointed is that your patch makes the window very small but doesn't close it.
If the race is a problem, this patch doesn't fix the problem.

True. As said I just want to avoid unnecessary overhead by calling functions which are known to be failing.

"to avoid unnecessary overhead by calling functions which are known
to be failing"

IMO, that should be in the patch description. :)

Quoted 3 lines

This patch actually makes more sense in combination with the 'accept failed paths' patch, where it's much more likely to trigger. So if you insist I could move it over to there.

If the description is fixed, I have no problem with this patch.

Signature · 1 line
Jun'ichi Nomura, NEC Corporation
#17 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

In reply to Hannes Reinecke
Quoted 41 lines · Hannes Reinecke
Quoted 40 lines · Junichi Nomura
Quoted 38 lines · Hannes Reinecke
Quoted 27 lines · Junichi Nomura
Quoted 13 lines · Hannes Reinecke

activate_path() is run without a lock, so the path might be set to failed before activate_path() had a chance to run.

---
 drivers/md/dm-mpath.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/md/dm-mpath.c +0 -0
index 0a40fa9..22e7365 100644

drivers/md/dm-mpath.c static void activate_path(struct work_struct *work) · line 1203

Quoted 10 lines
drivers/md/dm-mpath.c +5 -2
@@ -1196,8 +1196,11 @@ static void activate_path(struct work_struct *work)
 	struct pgpath *pgpath =
 		container_of(work, struct pgpath, activate_path.work);
 
-	scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
-				pg_init_done, pgpath);
+	if (pgpath->is_active)
+		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+				 pg_init_done, pgpath);
+	else
+		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);

Hi Hannes,

Quoted 4 lines

What problem are you going to fix with this?
It is still possible that the path is set to failed just after "if (pgpath->is_active)" and before "scsi_dh_activate".

activate_path() is run from a workqueue, so there is a race window between the check ->is_active in __pg_init_all_paths() and the time the scsi_dh_activate() is executed. And as activate_path)() is run without any locks we don't have any synchronization with fail_path(). So it's well possible that a path gets failed in between __pg_init_all_paths() and activate_paths().

Quoted 8 lines
Quoted 4 lines

What I pointed is that your patch makes the window very small but doesn't close it.
If the race is a problem, this patch doesn't fix the problem.

True. As said I just want to avoid unnecessary overhead by calling functions which are known to be failing.
This patch actually makes more sense in combination with the 'accept failed paths' patch, where it's much more likely to trigger.

FYI, I still intend to review/take your "accept failed paths" patch. Would be helpful if any rebase is needed for that patch that you do so and re-post.

One thing I noticed is you're only converting MAJ:MIN paths to devices. I think we should factor a helper out of DM core that does the full path lookup check from dm_get_device() -- rather than you open coding an older version of the MAJ:MIN device path processing.

But is there a reason for not using lookup_bdev()? Because the device is failed it cannot be found using lookup_bdev()?

#18 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

On 02/28/2014 03:22 PM, Mike Snitzer wrote:
[ .. ]

Quoted 5 lines

FYI, I still intend to review/take your "accept failed paths" patch. Would be helpful if any rebase is needed for that patch that you do so and re-post.

Quoted 8 lines

One thing I noticed is you're only converting MAJ:MIN paths to devices. I think we should factor a helper out of DM core that does the full path lookup check from dm_get_device() -- rather than you open coding an older version of the MAJ:MIN device path processing.

But is there a reason for not using lookup_bdev()? Because the device is failed it cannot be found using lookup_bdev()?

Yes, that's precisely it.
When setting dev_loss_tmo very aggressively (to, say, 10 or even 5 seconds) it might well be that multipathd won't be able to keep up with the events in time.
So by the time multipathd tries to push a new table into the kernel (which contains major:minor numbers only) those devices are already gone. So lookup_bdev() won't be able to find them, either.

Not sure if factoring things out from dm_get_device() would help here ...

But I'll be sending an updated patch, which'll apply on top of the 'push back' patchset.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
#19 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 15 lines · Hannes Reinecke

On 02/28/2014 03:22 PM, Mike Snitzer wrote:
[ .. ]

Quoted 5 lines

FYI, I still intend to review/take your "accept failed paths" patch. Would be helpful if any rebase is needed for that patch that you do so and re-post.

Quoted 8 lines

One thing I noticed is you're only converting MAJ:MIN paths to devices. I think we should factor a helper out of DM core that does the full path lookup check from dm_get_device() -- rather than you open coding an older version of the MAJ:MIN device path processing.

But is there a reason for not using lookup_bdev()? Because the device is failed it cannot be found using lookup_bdev()?

Quoted 7 lines

Yes, that's precisely it.
When setting dev_loss_tmo very aggressively (to, say, 10 or even 5 seconds) it might well be that multipathd won't be able to keep up with the events in time.
So by the time multipathd tries to push a new table into the kernel (which contains major:minor numbers only) those devices are already gone. So lookup_bdev() won't be able to find them, either.

Been talking this over with Alasdair. Need some things clarified.

Are you needing to handle non-existent devices during initial mpath table load?

Or is the failed path in question already part of the active mpath table -- so active table currently holds a reference to the device?

Or do you need to support both cases? Sounds like you want to support both cases..

Quoted 5 lines

Not sure if factoring things out from dm_get_device() would help here ...

But I'll be sending an updated patch, which'll apply on top of the 'push back' patchset.

Thanks.

#20 lore raw

Re: [PATCH 8/8] dm-mpath: do not activate failed paths

Quoted 28 lines · Mike Snitzer
Quoted 15 lines · Hannes Reinecke

On 02/28/2014 03:22 PM, Mike Snitzer wrote:
[ .. ]

Quoted 5 lines

FYI, I still intend to review/take your "accept failed paths" patch. Would be helpful if any rebase is needed for that patch that you do so and re-post.

Quoted 8 lines

One thing I noticed is you're only converting MAJ:MIN paths to devices. I think we should factor a helper out of DM core that does the full path lookup check from dm_get_device() -- rather than you open coding an older version of the MAJ:MIN device path processing.

But is there a reason for not using lookup_bdev()? Because the device is failed it cannot be found using lookup_bdev()?

Quoted 7 lines

Yes, that's precisely it.
When setting dev_loss_tmo very aggressively (to, say, 10 or even 5 seconds) it might well be that multipathd won't be able to keep up with the events in time.
So by the time multipathd tries to push a new table into the kernel (which contains major:minor numbers only) those devices are already gone. So lookup_bdev() won't be able to find them, either.

Been talking this over with Alasdair. Need some things clarified.

Quoted 9 lines

Are you needing to handle non-existent devices during initial mpath table load?

Or is the failed path in question already part of the active mpath table -- so active table currently holds a reference to the device?

Or do you need to support both cases? Sounds like you want to support both cases..

Hmm. I wouldn't think I'd need it during initial mpath table load; but then you never now, devices might fail faster than you'd think ...

So yeah, I'd need to support both cases.

The main reason why I've sent this patch is to get rid of these _really_ annoying messages 'error getting device' during failover. We really should and can do better than that.

That this patch allows to drop references to failed devices earlier is a nice side effect :-)

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		      zSeries & Storage
[email protected]			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)