Support for new MIPI Blocks in VBT
Subsystems (2)
v2 cover Support for new MIPI Blocks in VBT
Hi,
To support a plethora of MIPI panels, the VBT has been enhanced to support multiple panels in a generic manner. This involves adding one MIPI configuration block (#52) which provide all panel specific configuration data along with the dphy configuration information as per panel/tcon specs. Also a sequence (#53) block is added to provide required sequences for panel enabling.
The driver will use this parsed data to enable the panel which is described in these two block. The i-g-t tool intel_parse_bios changes to parse these new block is WIP.
The generic driver will be as one of sub-encoder driver in the existing design to support MIPI. Followup patches for this driver will come next.
v2: Address review comments from Jani Nikula
- update datastructures and related code to enable cleaner and simpler code
- using kmemdup instead of kmalloc and memcpy
- Proper error detection during parsing MIPI sequence block
Regards
Shobhit
Shobhit Kumar (2):
drm/i915: Update VBT data structures to have MIPI block enhancements drm/i915: Add parsing support for new MIPI blocks in VBT
drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 164 ++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_bios.h | 208 ++++++++++++++++++++++++++++++++------ 3 files changed, 343 insertions(+), 35 deletions(-)
Signature · 1 line
1.8.3.2
PATCH v2 1/2 drm/i915: Update VBT data structures to have MIPI block enhancements
MIPI Block #52 which provides configuration details for the MIPI panel including dphy settings as per panel and tcon specs
Block #53 gives information on panel enable sequences
v2: Address review comemnts from Jani
- Move panel ids from intel_dsi.h to intel_bios.h
- bdb_mipi_config structure improvements for cleaner code
- Adding units for the pps delays, all in ms
- change data structure to be more cleaner and simple
--- drivers/gpu/drm/i915/intel_bios.c | 4 +- drivers/gpu/drm/i915/intel_bios.h | 174 +++++++++++++++++++++++++++++++------- 2 files changed, 147 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +2 -2
@@ -599,14 +599,14 @@ parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb) {struct bdb_mipi *mipi; - mipi =find_section (bdb,BDB_MIPI ); + mipi =find_section (bdb,BDB_MIPI_CONFIG );if (!mipi) {DRM_DEBUG_KMS ("No MIPI BDB found" );return ; }/* XXX: add more info */ - dev_priv->vbt.dsi.panel_id = mipi->panel_id; + dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ; } static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
drivers/gpu/drm/i915/intel_bios.h +145 -29
196 lines not on this page · raw message
Signature · 1 line
1.8.3.2
Re: [v2 1/2] drm/i915: Update VBT data structures to have MIPI block enhancements
Quoted 5 lines · Shobhit Kumar
+/* Block 52 contains MIPI configuration block
+ * 6 *bdb_mipi_config, followed by 6 pps data
+ * block below
+ *
+ * all delays in ms
The spec you sent me has "... delay in 100us unit" for MIPI PPS entries which is weird and which is the reason I asked you to document the units. Please check.
With that checked,
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Re: [v2 1/2] drm/i915: Update VBT data structures to have MIPI block enhancements
Quoted 10 lines · Jani Nikula
Quoted 5 lines · Shobhit Kumar
+/* Block 52 contains MIPI configuration block
+ * 6 *bdb_mipi_config, followed by 6 pps data
+ * block below
+ *
+ * all delays in msThe spec you sent me has "... delay in 100us unit" for MIPI PPS entries which is weird and which is the reason I asked you to document the units. Please check.
Yeah, I made a mistake. It *is* in units of 100us. Will fix this.
Regards
Shobhit
PATCH 1/1 drm/i915: Update VBT data structures to have MIPI block enhancements
In reply to Shobhit KumarMIPI Block #52 which provides configuration details for the MIPI panel including dphy settings as per panel and tcon specs
Block #53 gives information on panel enable sequences
v2: Address review comemnts from Jani
- Move panel ids from intel_dsi.h to intel_bios.h
- bdb_mipi_config structure improvements for cleaner code
- Adding units for the pps delays, all in ms
- change data structure to be more cleaner and simple
v3: Corrected the unit for pps delays as 100us
--- drivers/gpu/drm/i915/intel_bios.c | 4 +- drivers/gpu/drm/i915/intel_bios.h | 174 +++++++++++++++++++++++++++++++------- 2 files changed, 147 insertions(+), 31 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +2 -2
@@ -599,14 +599,14 @@ parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb) {struct bdb_mipi *mipi; - mipi =find_section (bdb,BDB_MIPI ); + mipi =find_section (bdb,BDB_MIPI_CONFIG );if (!mipi) {DRM_DEBUG_KMS ("No MIPI BDB found" );return ; }/* XXX: add more info */ - dev_priv->vbt.dsi.panel_id = mipi->panel_id; + dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ; } static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
drivers/gpu/drm/i915/intel_bios.h +145 -29
196 lines not on this page · raw message
Signature · 1 line
1.8.3.2
Daniel Vetter
AppliedRe: [PATCH] drm/i915: Update VBT data structures to have MIPI block enhancements
Quoted 11 lines · Shobhit Kumar
MIPI Block #52 which provides configuration details for the MIPI panel including dphy settings as per panel and tcon specs
Block #53 gives information on panel enable sequences
v2: Address review comemnts from Jani
- Move panel ids fromintel_dsi.htointel_bios.h
-bdb_mipi_configstructure improvements for cleaner code
- Adding units for the pps delays, all in ms
- change data structure to be more cleaner and simple
Quoted 4 lines
v3: Corrected the unit for pps delays as 100us
Signed-off-by Shobhit Kumar <[email protected]>Reviewed-by Jani Nikula <[email protected]>
Queued for -next, thanks for the patch.
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
PATCH v2 2/2 drm/i915: Add parsing support for new MIPI blocks in VBT
In reply to Shobhit KumarThe parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes for bdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpy
--- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 162 ++++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_bios.h | 34 ++++++++ 3 files changed, 197 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +6 -0
@@ -1251,6 +1251,12 @@ struct intel_vbt_data {/* MIPI DSI */ struct {u16 panel_id; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 seq_version; +u32 size; +u8 *data; +u8 *sequence[MIPI_SEQ_MAX ]; } dsi;int crt_ddc_pin;
drivers/gpu/drm/i915/intel_bios.c +157 -5
176 lines not on this page · raw message
drivers/gpu/drm/i915/intel_bios.h +34 -0
@@ -867,4 +867,38 @@ struct bdb_mipi_sequence { u8 data[0]; }; +/* MIPI Sequnece Block definitions */ +enum MIPI_SEQ { +MIPI_SEQ_UNDEFINED =0 , +MIPI_SEQ_ASSERT_RESET , +MIPI_SEQ_INIT_OTP , +MIPI_SEQ_DISPLAY_ON , +MIPI_SEQ_DISPLAY_OFF , +MIPI_SEQ_DEASSERT_RESET , +MIPI_SEQ_MAX + +}; + +enum MIPI_SEQ_ELEMENT { +MIPI_SEQ_ELEM_UNDEFINED =0 , +MIPI_SEQ_ELEM_SEND_PKT , +MIPI_SEQ_ELEM_DELAY , +MIPI_SEQ_ELEM_GPIO , +MIPI_SEQ_ELEM_STATUS , +MIPI_SEQ_ELEM_MAX + +}; + +enum MIPI_GPIO_PIN_INDEX { +MIPI_GPIO_UNDEFINED =0 , +MIPI_GPIO_PANEL_ENABLE , +MIPI_GPIO_BL_ENABLE , +MIPI_GPIO_PWM_ENABLE , +MIPI_GPIO_RESET_N , +MIPI_GPIO_PWR_DOWN_R , +MIPI_GPIO_STDBY_RST_N , +MIPI_GPIO_MAX + +}; +#endif /* _I830_BIOS_H_ */
Signature · 1 line
1.8.3.2
Re: [v2 2/2] drm/i915: Add parsing support for new MIPI blocks in VBT
Quoted 43 lines · Shobhit Kumar
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes forbdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpySigned-off-by Shobhit Kumar <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 162 ++++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_bios.h | 34 ++++++++ 3 files changed, 197 insertions(+), 5 deletions(-)drivers/gpu/drm/i915/i915_drv.h +6
-0@@ -1251,6 +1251,12 @@ struct intel_vbt_data {/* MIPI DSI */ struct {u16 panel_id; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 seq_version; +u32 size; +u8 *data; +u8 *sequence[MIPI_SEQ_MAX ]; } dsi;int crt_ddc_pin;drivers/gpu/drm/i915/intel_bios.c +3
-0@@ -594,19 +594,171 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) } } +static u8 *goto_next_sequence (u8 *data,int *size) +{ +u16 len;
drivers/gpu/drm/i915/intel_bios.c parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) · line 609
Quoted 10 lines
drivers/gpu/drm/i915/intel_bios.c +10
-0+int tmp = *size; +/* goto first element */ + data++; +while (1 ) { +switch (*data++) { +case MIPI_SEQ_ELEM_SEND_PKT : +/* skip by this element payload size +* skip command flag and data type */ + data +=2 ; + len = *((u16 *)data);
You shouldn't touch the data before checking the pointer isn't past the block.
Quoted 4 lines
drivers/gpu/drm/i915/intel_bios.c +4
-0+/* skip by len */ + data = data +2 + len; + tmp = tmp -2 - len; +break ;
drivers/gpu/drm/i915/intel_bios.c parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) · line 623
Quoted 10 lines
drivers/gpu/drm/i915/intel_bios.c +10
-0+case MIPI_SEQ_ELEM_DELAY : + data +=4 ; + tmp = tmp -4 ; +break ; +case MIPI_SEQ_ELEM_GPIO : + data +=2 ; + tmp = tmp -2 ; +break ; +default : +DRM_ERROR ("Unknown element\n" );
Reading the spec, basically you have to bail out of the whole sequence block at this error. If you don't know the element, you don't know how to parse the payload of the element, which means you don't know when the element ends, which means there is no reliable way to find the next element.
Essentially this means the spec was written in a way that makes this forward incompatible.
drivers/gpu/drm/i915/intel_bios.c parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) · line 628
Quoted 5 lines
drivers/gpu/drm/i915/intel_bios.c +5
-0+break ; + } + +if (tmp <0 ) +WARN (1 ,"Reading beyond remaining sequence size\n" );
This is not a WARN. You need to bail out here, all the way out from the sequence block parsing.
Quoted 122 lines
drivers/gpu/drm/i915/intel_bios.c +109
-5+ +/* end of sequence ? */ +if (*data ==0 ) +break ; + } + +/* goto next sequence or end of block byte */ + data++; + tmp--; + +/* update amount of data left for the sequence block to be parsed */ + *size = tmp; +return data; +} +static void parse_mipi (struct drm_i915_private *dev_priv,struct bdb_header *bdb) { -struct bdb_mipi *mipi; +struct bdb_mipi_config *start; +struct bdb_mipi_sequence *sequence; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 *data, *seq_data; +int i, panel_id, seq_size; +u16 block_size; + +/* Initialize this to undefined indicating no generic MIPI support */ + dev_priv->vbt.dsi.panel_id =MIPI_DSI_UNDEFINED_PANEL_ID ; + +/* Block #40 is already parsed and panel_fixed_mode is +* stored in dev_priv->lfp_lvds_vbt_mode +* resuse this when needed +*/ - mipi =find_section (bdb,BDB_MIPI_CONFIG ); -if (!mipi) { -DRM_DEBUG_KMS ("No MIPI BDB found" ); +/* Parse #52 for panel index used from panel_type already +* parsed +*/ + start =find_section (bdb,BDB_MIPI_CONFIG ); +if (!start) { +DRM_DEBUG_KMS ("No MIPI config BDB found" );return ; } -/* XXX: add more info */ +DRM_DEBUG_DRIVER ("Found MIPI Config block, panel index = %d\n" , + panel_type); + +/* +* get hold of the correct configuration block and pps data as per +* the panel_type as index +*/ + config = &start->config[panel_type]; + pps = &start->pps[panel_type]; + +/* store as of now full data. Trim when we realise all is not needed */ + dev_priv->vbt.dsi.config =kmemdup (config,sizeof (struct mipi_config ),GFP_KERNEL ); +if (!dev_priv->vbt.dsi.config) +return ; + + dev_priv->vbt.dsi.pps =kmemdup (pps,sizeof (struct mipi_pps_data ),GFP_KERNEL ); +if (!dev_priv->vbt.dsi.pps) { +kfree (dev_priv->vbt.dsi.config); +return ; + } + +/* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ; + +/* Check if we have sequence block as well */ + sequence =find_section (bdb,BDB_MIPI_SEQUENCE ); +if (!sequence) { +DRM_DEBUG_KMS ("No MIPI Sequnece found, parsing complete\n" ); +return ; + } + +DRM_DEBUG_DRIVER ("Found MIPI sequence block\n" ); + + block_size =get_blocksize (sequence); + +/* +* parse the sequence block for individual sequences +*/ + dev_priv->vbt.dsi.seq_version = sequence->version; + + seq_data = &sequence->data[0 ]; + +/* sequence block is variable length and hence we need to parse and +* get the sequnece data for specific panel id */ +for (i =0 ; i <MAX_MIPI_CONFIGURATIONS ; i++) { + panel_id = *seq_data; + seq_size = *((u16 *) (seq_data +1 )); +if (panel_id == panel_type) +break ; + +/* skip the sequence including seq header of 3 bytes */ + seq_data = seq_data +3 + seq_size; +if ((seq_data - &sequence->data[0 ]) > block_size) +WARN (1 ,"Sequence is beyond sequence block size\n" ); + } + +if (i ==MAX_MIPI_CONFIGURATIONS ) { +DRM_ERROR ("Sequence block detected but no valid configuration\n" ); +return ; + } + +/* skip the panel id(1 byte) and seq size(2 bytes) */ + dev_priv->vbt.dsi.data =kmemdup (seq_data +3 , seq_size,GFP_KERNEL ); +if (!dev_priv->vbt.dsi.data) +return ; + +/* +* loop into the sequence data and split into multiple sequneces +* There are only 5 types of sequences as of now +*/ + data = dev_priv->vbt.dsi.data; + dev_priv->vbt.dsi.size = seq_size; + +/* two consecutive 0x00 inidcate end of all sequences */
drivers/gpu/drm/i915/intel_bios.c parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) · line 755
Quoted 10 lines
drivers/gpu/drm/i915/intel_bios.c +10
-0+while (1 ) { +int seq_id = *data; +if (MIPI_SEQ_MAX > seq_id && seq_id >MIPI_SEQ_UNDEFINED ) { + dev_priv->vbt.dsi.sequence[seq_id] = data; +DRM_DEBUG_DRIVER ("Found mipi sequence - %d\n" , seq_id); + }else +DRM_DEBUG_DRIVER ("undefined sequence\n" ); + +/* partial parsing to skip elements */ + data =goto_next_sequence (data, &seq_size);
I am really quite unhappy the VBT does not have these in a TLV structure. :(
Quoted 55 lines
drivers/gpu/drm/i915/intel_bios.c +6
-0+ +if (*data ==0 ) +break ;/* end of sequence reached */ + } + +DRM_DEBUG_DRIVER ("MIPI related vbt parsing complete\n" ); } static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,drivers/gpu/drm/i915/intel_bios.h +34
-0@@ -867,4 +867,38 @@ struct bdb_mipi_sequence { u8 data[0]; }; +/* MIPI Sequnece Block definitions */ +enum MIPI_SEQ { +MIPI_SEQ_UNDEFINED =0 , +MIPI_SEQ_ASSERT_RESET , +MIPI_SEQ_INIT_OTP , +MIPI_SEQ_DISPLAY_ON , +MIPI_SEQ_DISPLAY_OFF , +MIPI_SEQ_DEASSERT_RESET , +MIPI_SEQ_MAX + +}; + +enum MIPI_SEQ_ELEMENT { +MIPI_SEQ_ELEM_UNDEFINED =0 , +MIPI_SEQ_ELEM_SEND_PKT , +MIPI_SEQ_ELEM_DELAY , +MIPI_SEQ_ELEM_GPIO , +MIPI_SEQ_ELEM_STATUS , +MIPI_SEQ_ELEM_MAX + +}; + +enum MIPI_GPIO_PIN_INDEX { +MIPI_GPIO_UNDEFINED =0 , +MIPI_GPIO_PANEL_ENABLE , +MIPI_GPIO_BL_ENABLE , +MIPI_GPIO_PWM_ENABLE , +MIPI_GPIO_RESET_N , +MIPI_GPIO_PWR_DOWN_R , +MIPI_GPIO_STDBY_RST_N , +MIPI_GPIO_MAX + +}; +#endif /* _I830_BIOS_H_ */ Signature · 1 line
1.8.3.2
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
PATCH v3 1/1 drm/i915: Add parsing support for new MIPI blocks in VBT
In reply to Shobhit KumarThe parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes for bdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpy
v3: More strict check while parsing VBT
- Ensure that at anytime we do not go beyond sequence block while parsing
- On unknown element fail the whole parsing
v4: Style changes and spell check mostly as suggested by Jani
--- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 204 +++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_bios.h | 31 ++++++ 3 files changed, 236 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +6 -0
@@ -1170,6 +1170,12 @@ struct intel_vbt_data {/* MIPI DSI */ struct {u16 panel_id; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 seq_version; +u32 size; +u8 *data; +u8 *sequence[MIPI_SEQ_MAX ]; } dsi;int crt_ddc_pin;
drivers/gpu/drm/i915/intel_bios.c +199 -5
218 lines not on this page · raw message
drivers/gpu/drm/i915/intel_bios.h +31 -0
@@ -899,4 +899,35 @@ struct bdb_mipi_sequence { u8 data[0]; }; +/* MIPI Sequnece Block definitions */ +enum mipi_seq { +MIPI_SEQ_UNDEFINED =0 , +MIPI_SEQ_ASSERT_RESET , +MIPI_SEQ_INIT_OTP , +MIPI_SEQ_DISPLAY_ON , +MIPI_SEQ_DISPLAY_OFF , +MIPI_SEQ_DEASSERT_RESET , +MIPI_SEQ_MAX +}; + +enum mipi_seq_element { +MIPI_SEQ_ELEM_UNDEFINED =0 , +MIPI_SEQ_ELEM_SEND_PKT , +MIPI_SEQ_ELEM_DELAY , +MIPI_SEQ_ELEM_GPIO , +MIPI_SEQ_ELEM_STATUS , +MIPI_SEQ_ELEM_MAX +}; + +enum mipi_gpio_pin_index { +MIPI_GPIO_UNDEFINED =0 , +MIPI_GPIO_PANEL_ENABLE , +MIPI_GPIO_BL_ENABLE , +MIPI_GPIO_PWM_ENABLE , +MIPI_GPIO_RESET_N , +MIPI_GPIO_PWR_DOWN_R , +MIPI_GPIO_STDBY_RST_N , +MIPI_GPIO_MAX +}; +#endif /* _I830_BIOS_H_ */
Signature · 1 line
1.8.3.2
Re: [PATCH v3] drm/i915: Add parsing support for new MIPI blocks in VBT
Quoted 13 lines · Shobhit Kumar
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes forbdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpyv3: More strict check while parsing VBT
- Ensure that at anytime we do not go beyond sequence block while parsing
- On unknown element fail the whole parsing
Quoted 4 lines
v4: Style changes and spell check mostly as suggested by Jani
Signed-off-by Shobhit Kumar <[email protected]>Reviewed-by Jani Nikula <[email protected]>
I didn't spot Jani's r-b tag in earlier mails, was that done off-list? -Daniel
Quoted 293 lines
--- drivers/gpu/drm/i915/i915_drv.h | 6 ++ drivers/gpu/drm/i915/intel_bios.c | 204 +++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_bios.h | 31 ++++++ 3 files changed, 236 insertions(+), 5 deletions(-)drivers/gpu/drm/i915/i915_drv.h +6
-0@@ -1170,6 +1170,12 @@ struct intel_vbt_data {/* MIPI DSI */ struct {u16 panel_id; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 seq_version; +u32 size; +u8 *data; +u8 *sequence[MIPI_SEQ_MAX ]; } dsi;int crt_ddc_pin;drivers/gpu/drm/i915/intel_bios.c +199
-5@@ -636,19 +636,213 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) } } +static u8 *goto_next_sequence (u8 *data,int *size) +{ +u16 len; +int tmp = *size; + +if (--tmp <0 ) +return NULL ; + +/* goto first element */ + data++; +while (1 ) { +switch (*data) { +case MIPI_SEQ_ELEM_SEND_PKT : +/* +* skip by this element payload size +* skip elem id, command flag and data type +*/ +if ((tmp = tmp -5 ) <0 ) +return NULL ; + + data +=3 ; + len = *((u16 *)data); + +if ((tmp = tmp - len) <0 ) +return NULL ; + +/* skip by len */ + data = data +2 + len; +break ; +case MIPI_SEQ_ELEM_DELAY : +/* skip by elem id, and delay is 4 bytes */ +if ((tmp = tmp -5 ) <0 ) +return NULL ; + + data +=5 ; +break ; +case MIPI_SEQ_ELEM_GPIO : +if ((tmp = tmp -3 ) <0 ) +return NULL ; + + data +=3 ; +break ; +default : +DRM_ERROR ("Unknown element\n" ); +return NULL ; + } + +/* end of sequence ? */ +if (*data ==0 ) +break ; + } + +/* goto next sequence or end of block byte */ +if (--tmp <0 ) +return NULL ; + + data++; + +/* update amount of data left for the sequence block to be parsed */ + *size = tmp; +return data; +} +static void parse_mipi (struct drm_i915_private *dev_priv,struct bdb_header *bdb) { -struct bdb_mipi *mipi; +struct bdb_mipi_config *start; +struct bdb_mipi_sequence *sequence; +struct mipi_config *config; +struct mipi_pps_data *pps; +u8 *data, *seq_data; +int i, panel_id, seq_size; +u16 block_size; + +/* Initialize this to undefined indicating no generic MIPI support */ + dev_priv->vbt.dsi.panel_id =MIPI_DSI_UNDEFINED_PANEL_ID ; + +/* Block #40 is already parsed and panel_fixed_mode is +* stored in dev_priv->lfp_lvds_vbt_mode +* resuse this when needed +*/ - mipi =find_section (bdb,BDB_MIPI_CONFIG ); -if (!mipi) { -DRM_DEBUG_KMS ("No MIPI BDB found" ); +/* Parse #52 for panel index used from panel_type already +* parsed +*/ + start =find_section (bdb,BDB_MIPI_CONFIG ); +if (!start) { +DRM_DEBUG_KMS ("No MIPI config BDB found" );return ; } -/* XXX: add more info */ +DRM_DEBUG_DRIVER ("Found MIPI Config block, panel index = %d\n" , + panel_type); + +/* +* get hold of the correct configuration block and pps data as per +* the panel_type as index +*/ + config = &start->config[panel_type]; + pps = &start->pps[panel_type]; + +/* store as of now full data. Trim when we realise all is not needed */ + dev_priv->vbt.dsi.config =kmemdup (config,sizeof (struct mipi_config ),GFP_KERNEL ); +if (!dev_priv->vbt.dsi.config) +return ; + + dev_priv->vbt.dsi.pps =kmemdup (pps,sizeof (struct mipi_pps_data ),GFP_KERNEL ); +if (!dev_priv->vbt.dsi.pps) { +kfree (dev_priv->vbt.dsi.config); +return ; + } + +/* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ; + +/* Check if we have sequence block as well */ + sequence =find_section (bdb,BDB_MIPI_SEQUENCE ); +if (!sequence) { +DRM_DEBUG_KMS ("No MIPI Sequence found, parsing complete\n" ); +return ; + } + +DRM_DEBUG_DRIVER ("Found MIPI sequence block\n" ); + + block_size =get_blocksize (sequence); + +/* +* parse the sequence block for individual sequences +*/ + dev_priv->vbt.dsi.seq_version = sequence->version; + + seq_data = &sequence->data[0 ]; + +/* +* sequence block is variable length and hence we need to parse and +* get the sequence data for specific panel id +*/ +for (i =0 ; i <MAX_MIPI_CONFIGURATIONS ; i++) { + panel_id = *seq_data; + seq_size = *((u16 *) (seq_data +1 )); +if (panel_id == panel_type) +break ; + +/* skip the sequence including seq header of 3 bytes */ + seq_data = seq_data +3 + seq_size; +if ((seq_data - &sequence->data[0 ]) > block_size) { +DRM_ERROR ("Sequence start is beyond sequence block size, corrupted sequence block\n" ); +return ; + } + } + +if (i ==MAX_MIPI_CONFIGURATIONS ) { +DRM_ERROR ("Sequence block detected but no valid configuration\n" ); +return ; + } + +/* check if found sequence is completely within the sequence block +* just being paranoid */ +if (seq_size > block_size) { +DRM_ERROR ("Corrupted sequence/size, bailing out\n" ); +return ; + } + +/* skip the panel id(1 byte) and seq size(2 bytes) */ + dev_priv->vbt.dsi.data =kmemdup (seq_data +3 , seq_size,GFP_KERNEL ); +if (!dev_priv->vbt.dsi.data) +return ; + +/* +* loop into the sequence data and split into multiple sequneces +* There are only 5 types of sequences as of now +*/ + data = dev_priv->vbt.dsi.data; + dev_priv->vbt.dsi.size = seq_size; + +/* two consecutive 0x00 indicate end of all sequences */ +while (1 ) { +int seq_id = *data; +if (MIPI_SEQ_MAX > seq_id && seq_id >MIPI_SEQ_UNDEFINED ) { + dev_priv->vbt.dsi.sequence[seq_id] = data; +DRM_DEBUG_DRIVER ("Found mipi sequence - %d\n" , seq_id); + }else { +DRM_ERROR ("undefined sequence\n" ); + goto err; + } + +/* partial parsing to skip elements */ + data =goto_next_sequence (data, &seq_size); + +if (data ==NULL ) { +DRM_ERROR ("Sequence elements going beyond block itself. Sequence block parsing failed\n" ); + goto err; + } + +if (*data ==0 ) +break ;/* end of sequence reached */ + } + +DRM_DEBUG_DRIVER ("MIPI related vbt parsing complete\n" ); +return ; +err: +kfree (dev_priv->vbt.dsi.data); + dev_priv->vbt.dsi.data =NULL ; + +/* error during parsing so set all pointers to null +* because of partial parsing */ +memset (dev_priv->vbt.dsi.sequence,0 ,MIPI_SEQ_MAX ); } static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,drivers/gpu/drm/i915/intel_bios.h +31
-0@@ -899,4 +899,35 @@ struct bdb_mipi_sequence { u8 data[0]; }; +/* MIPI Sequnece Block definitions */ +enum mipi_seq { +MIPI_SEQ_UNDEFINED =0 , +MIPI_SEQ_ASSERT_RESET , +MIPI_SEQ_INIT_OTP , +MIPI_SEQ_DISPLAY_ON , +MIPI_SEQ_DISPLAY_OFF , +MIPI_SEQ_DEASSERT_RESET , +MIPI_SEQ_MAX +}; + +enum mipi_seq_element { +MIPI_SEQ_ELEM_UNDEFINED =0 , +MIPI_SEQ_ELEM_SEND_PKT , +MIPI_SEQ_ELEM_DELAY , +MIPI_SEQ_ELEM_GPIO , +MIPI_SEQ_ELEM_STATUS , +MIPI_SEQ_ELEM_MAX +}; + +enum mipi_gpio_pin_index { +MIPI_GPIO_UNDEFINED =0 , +MIPI_GPIO_PANEL_ENABLE , +MIPI_GPIO_BL_ENABLE , +MIPI_GPIO_PWM_ENABLE , +MIPI_GPIO_RESET_N , +MIPI_GPIO_PWR_DOWN_R , +MIPI_GPIO_STDBY_RST_N , +MIPI_GPIO_MAX +}; +#endif /* _I830_BIOS_H_ */ Signature · 6 lines
1.8.3.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Re: [PATCH v3] drm/i915: Add parsing support for new MIPI blocks in VBT
Quoted 14 lines · Daniel Vetter
Quoted 13 lines · Shobhit Kumar
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes forbdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpyv3: More strict check while parsing VBT
- Ensure that at anytime we do not go beyond sequence block while parsing
- On unknown element fail the whole parsing
Quoted 6 lines
Quoted 4 lines
v4: Style changes and spell check mostly as suggested by Jani
Signed-off-by Shobhit Kumar <[email protected]>Reviewed-by Jani Nikula <[email protected]>I didn't spot Jani's r-b tag in earlier mails, was that done off-list?
Yeah, was reviewed along with the other DSI patchset you merged, sorry about that. But then some patches needed internal review while they were being approved for up-streaming to save time. And this one was related to the other panel driver patches which I published today so got stuck with them. Sorry about that.
Regards
Shobhit
Re: [PATCH v3] drm/i915: Add parsing support for new MIPI blocks in VBT
Quoted 20 lines · Shobhit
Quoted 19 lines · Daniel Vetter
Quoted 17 lines · Shobhit Kumar
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes forbdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpyv3: More strict check while parsing VBT
- Ensure that at anytime we do not go beyond sequence block while parsing
- On unknown element fail the whole parsingv4: Style changes and spell check mostly as suggested by Jani
Signed-off-by Shobhit Kumar <[email protected]>Reviewed-by Jani Nikula <[email protected]>
Quoted 7 lines
Quoted 1 line
I didn't spot Jani's r-b tag in earlier mails, was that done off-list?
Yeah, was reviewed along with the other DSI patchset you merged, sorry about that. But then some patches needed internal review while they were being approved for up-streaming to save time. And this one was related to the other panel driver patches which I published today so got stuck with them. Sorry about that.
Ok, pulled it in. checkpatch complained a few times about assignments in if conditions, and I tend to agree. Can you please follow up with a cleanup patch? Also it looks like assignment operators could be used. -Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Re: [PATCH v3] drm/i915: Add parsing support for new MIPI blocks in VBT
Quoted 29 lines · Daniel Vetter
Quoted 20 lines · Shobhit
Quoted 19 lines · Daniel Vetter
Quoted 17 lines · Shobhit Kumar
The parser extracts the config block(#52) and sequence(#53) data and store in private data structures.
v2: Address review comments by Jani
- adjust code for the structure changes forbdb_mipi_config
- add boundry and buffer overflow checks as suggested
- use kmemdup instead of kmalloc and memcpyv3: More strict check while parsing VBT
- Ensure that at anytime we do not go beyond sequence block while parsing
- On unknown element fail the whole parsingv4: Style changes and spell check mostly as suggested by Jani
Signed-off-by Shobhit Kumar <[email protected]>Reviewed-by Jani Nikula <[email protected]>Quoted 7 lines
Quoted 1 line
I didn't spot Jani's r-b tag in earlier mails, was that done off-list?
Yeah, was reviewed along with the other DSI patchset you merged, sorry about that. But then some patches needed internal review while they were being approved for up-streaming to save time. And this one was related to the other panel driver patches which I published today so got stuck with them. Sorry about that.
Quoted 4 lines
Ok, pulled it in. checkpatch complained a few times about assignments in if conditions, and I tend to agree. Can you please follow up with a cleanup patch? Also it looks like assignment operators could be used. -Daniel
Ok. Thanks. I should have run checkpatch. Will fix and push a cleanup patch.
Regards
Shobhit
PATCH 1/1 drm/i915: Code cleanup patch to fix checkpatch errors
In reply to Daniel VetterThis cleans up the checkpatch errors for the merged commit -
commit d3b542fcfc72d7724585e3fd2c5e75351bc3df47
Author: Shobhit Kumar <[email protected]> Date: Mon Apr 14 11:00:34 2014 +0530
drm/i915: Add parsing support for new MIPI blocks in VBT
--- drivers/gpu/drm/i915/intel_bios.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_bios.c +8 -4
@@ -653,13 +653,15 @@ static u8 *goto_next_sequence(u8 *data, int *size)* skip by this element payload size * skip elem id, command flag and data type */ -if ((tmp = tmp -5 ) <0 ) + tmp -=5 ; +if (tmp <0 )return NULL ; data +=3 ; len = *((u16 *)data); -if ((tmp = tmp - len) <0 ) + tmp -= len; +if (tmp <0 )return NULL ;/* skip by len */
@@ -667,13 +669,15 @@ static u8 *goto_next_sequence(u8 *data, int *size)break ;case MIPI_SEQ_ELEM_DELAY :/* skip by elem id, and delay is 4 bytes */ -if ((tmp = tmp -5 ) <0 ) + tmp -=5 ; +if (tmp <0 )return NULL ; data +=5 ;break ;case MIPI_SEQ_ELEM_GPIO : -if ((tmp = tmp -3 ) <0 ) + tmp -=3 ; +if (tmp <0 )return NULL ; data +=3 ;
Signature · 1 line
1.8.3.2
Daniel Vetter
AppliedRe: [PATCH] drm/i915: Code cleanup patch to fix checkpatch errors
Quoted 9 lines · Shobhit Kumar
This cleans up the checkpatch errors for the merged commit -
commit
d3b542fcfc72d7724585e3fd2c5e75351bc3df47Author: Shobhit Kumar <[email protected]> Date: Mon Apr 14 11:00:34 2014 +0530drm/i915: Add parsing support for new MIPI blocks in VBT
Signed-off-by Shobhit Kumar <[email protected]>
Queued for -next, thanks for the patch.
-Daniel
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch