powerpc:Add support of SPL non-relocation
PATCH 2/6 powerpc:Add support of SPL non-relocation
Current SPL code base has BSS section placed after reset_vector. This means they have to relocate to use the global variables. This put an implicit requirement of having SPL size = Memory/2.
To avoid relocation:
- Move bss_section within SPL range
- Modify relocate_code()
Signed-off-by Prabhakar Kushwaha <[email protected]>
--- README | 3 +++ arch/powerpc/cpu/mpc85xx/start.S | 2 ++ arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 12 ++++++++++++ 3 files changed, 17 insertions(+)
README +3 -0
@@ -3300,6 +3300,9 @@ FIT uImage format: continuing (the hardware starts execution after just loading the first page rather than the full 4K). + CONFIG_SPL_SKIP_RELOCATE + Avoid SPL relocation + CONFIG_SPL_NAND_BASE Include nand_base.c in the SPL. Requires CONFIG_SPL_NAND_DRIVERS.
arch/powerpc/cpu/mpc85xx/start.S +2 -0
@@ -1644,6 +1644,7 @@ relocate_code: mr r10,r5 /* Save copy of Destination Address */ GET_GOT +#ifndef CONFIG_SPL_SKIP_RELOCATE mr r3,r5 /* Destination Address */ lis r4,CONFIG_SYS_MONITOR_BASE at h /* Source Address */ ori r4,r4,CONFIG_SYS_MONITOR_BASE at l
@@ -1734,6 +1735,7 @@ relocate_code: mtlr r0 blr /* NEVER RETURNS! */ +#endif .globl in_ram in_ram:
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +12 -0
@@ -57,6 +57,16 @@ SECTIONS . = ALIGN(8); __init_begin = .; __init_end = .; +#ifdef CONFIG_SPL_SKIP_RELOCATE + . = ALIGN(4); + __bss_start = .; + .bss : { + *(.sbss*) + *(.bss*) + } + . = ALIGN(4); + __bss_end = .; +#endif /* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */ #ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
@@ -86,6 +96,7 @@ SECTIONS } = 0xffff #endif +#ifndef CONFIG_SPL_SKIP_RELOCATE /* * Make sure that the bss segment isn't linked at 0x0, otherwise its * address won't be updated during relocation fixups.
@@ -100,4 +111,5 @@ SECTIONS } . = ALIGN(4); __bss_end = .; +#endif }
Signature · 1 line
1.7.9.5