bna: fix vlan tag stripping and implement its toggling
Subsystems (3)
PATCH v3 1/1 bna: fix vlan tag stripping and implement its toggling
The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes __vlan_hwaccel_put_tag() is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this:
---
[18370.665074] kernel BUG at include/linux/skbuff.h:1497! ... [18370.876769] Call Trace: [18370.879455] <IRQ> [18370.881569] [<ffffffffa063a3c6>] internal_dev_recv+0xb6/0x130 [openvswitch] [18370.889552] [<ffffffffa06398ed>] ovs_vport_send+0x1d/0x80 [openvswitch] [18370.896922] [<ffffffffa063016a>] do_output+0x2a/0x50 [openvswitch] [18370.903814] [<ffffffffa06304cd>] do_execute_actions+0x19d/0xb20 [openvswitch] [18370.911757] [<ffffffffa0630e7b>] ovs_execute_actions+0x2b/0x30 [openvswitch] [18370.919602] [<ffffffffa0633722>] ovs_dp_process_received_packet+0x92/0x120 [openvswitch] [18370.928597] [<ffffffff8109be83>] ? find_busiest_group+0x103/0x880 [18370.935396] [<ffffffffa063982a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [18370.943053] [<ffffffffa063a6b1>] netdev_frame_hook+0xc1/0x120 [openvswitch] [18370.950802] [<ffffffff814b27c2>] __netif_receive_skb_core+0x262/0x840 [18370.957982] [<ffffffff81019a00>] ? flush_ptrace_hw_breakpoint+0x10/0x40 [18370.965349] [<ffffffff814b2db8>] __netif_receive_skb+0x18/0x60 [18370.971855] [<ffffffff814b2e33>] netif_receive_skb+0x33/0xb0 [18370.978172] [<ffffffff814b3736>] napi_gro_frags+0x116/0x170 [18370.984407] [<ffffffffa0c7aaa4>] bnad_napi_poll_rx+0x3f4/0x8f0 [bna] [18370.991488] [<ffffffff814b31ba>] net_rx_action+0x15a/0x250
...
---
The following patch makes the following changes so the driver:
1. Implements .ndo_set_features so an user can toggle VLAN tag stripping on/off
2. Does not disable VLAN tag stripping in promiscuous mode so the driver respect user's choice
3. Calls __vlan_hwaccel_put_tag() only when the stripping is enabled
v2:
- make bnad_set_features static (thanks Florian Westphal)
- enable/disable VLAN stripping during open WRT hw_features
v3:
- enable/disable VLAN stripping during open WRT features and not hw_features
--- drivers/net/ethernet/brocade/bna/bnad.c | 40 ++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 10 deletions(-)
drivers/net/ethernet/brocade/bna/bnad.c +30 -10
@@ -707,7 +707,8 @@ bnad_cq_process(struct bnad *bnad, struct bna_ccb *ccb, int budget)else skb_checksum_none_assert (skb); -if (flags &BNA_CQ_EF_VLAN ) +if ((flags &BNA_CQ_EF_VLAN ) && + (bnad->netdev->features &NETIF_F_HW_VLAN_CTAG_RX ))__vlan_hwaccel_put_tag (skb,htons (ETH_P_8021Q ),ntohs (cmpl->vlan_tag));if (BNAD_RXBUF_IS_SK_BUFF (unmap_q->type))
@@ -2094,7 +2095,9 @@ bnad_init_rx_config(struct bnad *bnad, struct bna_rx_config *rx_config) rx_config->q1_buf_size =BFI_SMALL_RXBUF_SIZE ; } - rx_config->vlan_strip_status =BNA_STATUS_T_ENABLED ; + rx_config->vlan_strip_status = + (bnad->netdev->features &NETIF_F_HW_VLAN_CTAG_RX ) ? +BNA_STATUS_T_ENABLED :BNA_STATUS_T_DISABLED ; } static void
@@ -3245,11 +3248,6 @@ bnad_set_rx_mode(struct net_device *netdev)BNA_RXMODE_ALLMULTI ;bna_rx_mode_set (bnad->rx_info[0 ].rx, new_mode, mode_mask,NULL ); -if (bnad->cfg_flags &BNAD_CF_PROMISC ) -bna_rx_vlan_strip_disable (bnad->rx_info[0 ].rx); -else -bna_rx_vlan_strip_enable (bnad->rx_info[0 ].rx); -spin_unlock_irqrestore (&bnad->bna_lock, flags); }
@@ -3374,6 +3372,27 @@ bnad_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)return 0 ; } +static int bnad_set_features (struct net_device *dev,netdev_features_t features) +{ +struct bnad *bnad =netdev_priv (dev); +netdev_features_t changed = features ^ dev->features; + +if ((changed &NETIF_F_HW_VLAN_CTAG_RX ) &&netif_running (dev)) { +unsigned long flags; + +spin_lock_irqsave (&bnad->bna_lock, flags); + +if (features &NETIF_F_HW_VLAN_CTAG_RX ) +bna_rx_vlan_strip_enable (bnad->rx_info[0 ].rx); +else +bna_rx_vlan_strip_disable (bnad->rx_info[0 ].rx); + +spin_unlock_irqrestore (&bnad->bna_lock, flags); + } + +return 0 ; +} +#ifdef CONFIG_NET_POLL_CONTROLLER static void bnad_netpoll (struct net_device *netdev)
@@ -3421,6 +3440,7 @@ static const struct net_device_ops bnad_netdev_ops = { .ndo_change_mtu = bnad_change_mtu, .ndo_vlan_rx_add_vid = bnad_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = bnad_vlan_rx_kill_vid, + .ndo_set_features = bnad_set_features, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = bnad_netpoll #endif
@@ -3433,14 +3453,14 @@ bnad_netdev_init(struct bnad *bnad, bool using_dac) netdev->hw_features =NETIF_F_SG |NETIF_F_RXCSUM |NETIF_F_IP_CSUM |NETIF_F_IPV6_CSUM | -NETIF_F_TSO |NETIF_F_TSO6 |NETIF_F_HW_VLAN_CTAG_TX ; +NETIF_F_TSO |NETIF_F_TSO6 |NETIF_F_HW_VLAN_CTAG_TX | +NETIF_F_HW_VLAN_CTAG_RX ; netdev->vlan_features =NETIF_F_SG |NETIF_F_HIGHDMA |NETIF_F_IP_CSUM |NETIF_F_IPV6_CSUM |NETIF_F_TSO |NETIF_F_TSO6 ; - netdev->features |= netdev->hw_features | -NETIF_F_HW_VLAN_CTAG_RX |NETIF_F_HW_VLAN_CTAG_FILTER ; + netdev->features |= netdev->hw_features |NETIF_F_HW_VLAN_CTAG_FILTER ;if (using_dac) netdev->features |=NETIF_F_HIGHDMA ;
Signature · 1 line
1.8.3.2
Quoted 37 lines · Fri, Feb 28, 2014 at 02:14:03PM CET, [email protected] wrote:
The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes
__vlan_hwaccel_put_tag()is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this:---
[18370.665074] kernel BUG at include/linux/skbuff.h:1497! ... [18370.876769] Call Trace: [18370.879455] <IRQ> [18370.881569] [<ffffffffa063a3c6>] internal_dev_recv+0xb6/0x130 [openvswitch] [18370.889552] [<ffffffffa06398ed>] ovs_vport_send+0x1d/0x80 [openvswitch] [18370.896922] [<ffffffffa063016a>] do_output+0x2a/0x50 [openvswitch] [18370.903814] [<ffffffffa06304cd>] do_execute_actions+0x19d/0xb20 [openvswitch] [18370.911757] [<ffffffffa0630e7b>] ovs_execute_actions+0x2b/0x30 [openvswitch] [18370.919602] [<ffffffffa0633722>] ovs_dp_process_received_packet+0x92/0x120 [openvswitch] [18370.928597] [<ffffffff8109be83>] ? find_busiest_group+0x103/0x880 [18370.935396] [<ffffffffa063982a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [18370.943053] [<ffffffffa063a6b1>] netdev_frame_hook+0xc1/0x120 [openvswitch] [18370.950802] [<ffffffff814b27c2>] __netif_receive_skb_core+0x262/0x840 [18370.957982] [<ffffffff81019a00>] ? flush_ptrace_hw_breakpoint+0x10/0x40 [18370.965349] [<ffffffff814b2db8>] __netif_receive_skb+0x18/0x60 [18370.971855] [<ffffffff814b2e33>] netif_receive_skb+0x33/0xb0 [18370.978172] [<ffffffff814b3736>] napi_gro_frags+0x116/0x170 [18370.984407] [<ffffffffa0c7aaa4>] bnad_napi_poll_rx+0x3f4/0x8f0 [bna] [18370.991488] [<ffffffff814b31ba>] net_rx_action+0x15a/0x250...
---The following patch makes the following changes so the driver:
1. Implements .ndo_set_features so an user can toggle VLAN tag stripping on/off
2. Does not disable VLAN tag stripping in promiscuous mode so the driver respect user's choice
3. Calls__vlan_hwaccel_put_tag()only when the stripping is enabled
Quoted 8 lines
v2:
- makebnad_set_featuresstatic (thanks Florian Westphal)
- enable/disable VLAN stripping during open WRThw_featuresv3:
- enable/disable VLAN stripping during open WRT features and nothw_featuresSigned-off-by Ivan Vecera <[email protected]>
Looks ok to me now.
David Miller
maintainerFrom: Ivan Vecera <[email protected]>
Date: Fri, 28 Feb 2014 14:14:03 +0100
Quoted 5 lines
The recent commit "fe1624c bna: RX Filter Enhancements" disables VLAN tag stripping if the NIC is in promiscuous mode. This causes
__vlan_hwaccel_put_tag()is called when the stripping is disabled. Because of this VLAN over bna does not work and causes BUGs in conjunction with openvswitch like this:
...
Quoted 7 lines
The following patch makes the following changes so the driver:
1. Implements .ndo_set_features so an user can toggle VLAN tag stripping on/off
2. Does not disable VLAN tag stripping in promiscuous mode so the driver respect user's choice
3. Calls__vlan_hwaccel_put_tag()only when the stripping is enabled
Quoted 8 lines
v2:
- makebnad_set_featuresstatic (thanks Florian Westphal)
- enable/disable VLAN stripping during open WRThw_featuresv3:
- enable/disable VLAN stripping during open WRT features and nothw_featuresSigned-off-by Ivan Vecera <[email protected]>
Ok, I'm fine with this fix for now, applied thanks Ivan.