ARM: tegra: add device tree for Tegra Note 7
Subsystems (3)
PATCH 1/1 ARM: tegra: add device tree for Tegra Note 7
Add a device tree for Tegra Note 7. The set of enabled features is still minimal with no display option and USB requiring external power.
Pinctrl is not set yet, as the bootloader-provided values allow us to use the currently-supported hardware.
A default kernel command-line as well as initrd addresses are hardcoded to match the static values the bootloader is known to use. This allows booting from an appended DTB without having to alter it at boot time, since the bootloader has no Device Tree support.
Signed-off-by Alexandre Courbot <[email protected]>
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra114-tn7.dts | 278 +++++++++++++++++++++++++++++++++++++ 2 files changed, 279 insertions(+) create mode 100644 arch/arm/boot/dts/tegra114-tn7.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -357,6 +357,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ + tegra114-tn7.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb
arch/arm/boot/dts/tegra114-tn7.dts new file +278 -0
278 lines not on this page · raw message
Signature · 1 line
1.9.0