Skip to contentSkip to conversation

ASoC: da732x: Replace hw_read usage with snd_soc_read()

PATCH In review Mark Brown 2 participants 2 messages Mar 4, 2014

Subsystems (3)
lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

PATCH 1/1 ASoC: da732x: Replace hw_read usage with snd_soc_read()

From: Mark Brown <[email protected]>

Pre-merge code was using direct hw_read() calls as an out of framework way of doing volatile register I/O when not using regmap. This has never functioned correctly in mainline due to the regmap conversion, the hw_read() implementation still does caching. In order to facilitate removal of the subsystem level I/O code convert to use snd_soc_read(), there should be no functional impact.

---
 sound/soc/codecs/da732x.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
sound/soc/codecs/da732x.c +8 -8
index 4d1c302..14acb3a 100644
@@ -1297,9 +1297,9 @@ static void da732x_dac_offset_adjust(struct snd_soc_codec *codec)
 	msleep(DA732X_WAIT_FOR_STABILIZATION);
 
 	/* Check DAC offset sign */
-	sign[DA732X_HPL_DAC] = (codec->hw_read(codec, DA732X_REG_HPL_DAC_OFF_CNTL) &
+	sign[DA732X_HPL_DAC] = snd_soc_read(codec, DA732X_REG_HPL_DAC_OFF_CNTL) &
 				DA732X_HP_DAC_OFF_CNTL_COMPO);
-	sign[DA732X_HPR_DAC] = (codec->hw_read(codec, DA732X_REG_HPR_DAC_OFF_CNTL) &
+	sign[DA732X_HPR_DAC] = snd_soc_read(codec, DA732X_REG_HPR_DAC_OFF_CNTL) &
 				DA732X_HP_DAC_OFF_CNTL_COMPO);
 
 	/* Binary search DAC offset values (both channels at once) */
@@ -1316,10 +1316,10 @@ static void da732x_dac_offset_adjust(struct snd_soc_codec *codec)
 
 		msleep(DA732X_WAIT_FOR_STABILIZATION);
 
-		if ((codec->hw_read(codec, DA732X_REG_HPL_DAC_OFF_CNTL) &
+		if ((snd_soc_read(codec, DA732X_REG_HPL_DAC_OFF_CNTL) &
 		     DA732X_HP_DAC_OFF_CNTL_COMPO) ^ sign[DA732X_HPL_DAC])
 			offset[DA732X_HPL_DAC] &= ~step;
-		if ((codec->hw_read(codec, DA732X_REG_HPR_DAC_OFF_CNTL) &
+		if ((snd_soc_read(codec, DA732X_REG_HPR_DAC_OFF_CNTL) &
 		     DA732X_HP_DAC_OFF_CNTL_COMPO) ^ sign[DA732X_HPR_DAC])
 			offset[DA732X_HPR_DAC] &= ~step;
 
@@ -1360,9 +1360,9 @@ static void da732x_output_offset_adjust(struct snd_soc_codec *codec)
 	msleep(DA732X_WAIT_FOR_STABILIZATION);
 
 	/* Check output offset sign */
-	sign[DA732X_HPL_AMP] = codec->hw_read(codec, DA732X_REG_HPL) &
+	sign[DA732X_HPL_AMP] = snd_soc_read(codec, DA732X_REG_HPL) &
 			       DA732X_HP_OUT_COMPO;
-	sign[DA732X_HPR_AMP] = codec->hw_read(codec, DA732X_REG_HPR) &
+	sign[DA732X_HPR_AMP] = snd_soc_read(codec, DA732X_REG_HPR) &
 			       DA732X_HP_OUT_COMPO;
 
 	snd_soc_write(codec, DA732X_REG_HPL, DA732X_HP_OUT_COMP |
@@ -1383,10 +1383,10 @@ static void da732x_output_offset_adjust(struct snd_soc_codec *codec)
 
 		msleep(DA732X_WAIT_FOR_STABILIZATION);
 
-		if ((codec->hw_read(codec, DA732X_REG_HPL) &
+		if ((snd_soc_read(codec, DA732X_REG_HPL) &
 		     DA732X_HP_OUT_COMPO) ^ sign[DA732X_HPL_AMP])
 			offset[DA732X_HPL_AMP] &= ~step;
-		if ((codec->hw_read(codec, DA732X_REG_HPR) &
+		if ((snd_soc_read(codec, DA732X_REG_HPR) &
 		     DA732X_HP_OUT_COMPO) ^ sign[DA732X_HPR_AMP])
 			offset[DA732X_HPR_AMP] &= ~step;
 
Signature · 1 line
1.9.0
Acked-by on v1 1/1
#1 lore raw
Quoted 10 lines · Mark Brown

From: Mark Brown <[email protected]>

Pre-merge code was using direct hw_read() calls as an out of framework way of doing volatile register I/O when not using regmap. This has never functioned correctly in mainline due to the regmap conversion, the hw_read() implementation still does caching. In order to facilitate removal of the subsystem level I/O code convert to use snd_soc_read(), there should be no functional impact.