input synaptics-rmi4: remove rmi_f01 interrupt enable handling

The previous interrupt save/restore routine was inflexible. Remove that and add set_bits() and clear_bits() functions, allowing simpler management of individual function interrupt enables.

Signed-off-by Christopher Heiny <[email protected]>

Cc Dmitry Torokhov <[email protected]>

Cc Benjamin Tissoires <[email protected]>

Cc Linux Walleij <[email protected]>

Cc David Herrmann <[email protected]>

Cc Jiri Kosina <[email protected]>

---

 drivers/input/rmi4/rmi_bus.h    |  12 ++---
 drivers/input/rmi4/rmi_driver.c | 104 ++++++++++++++++------------------------
 drivers/input/rmi4/rmi_driver.h |   3 +-
 3 files changed, 48 insertions(+), 71 deletions(-)

drivers/input/rmi4/rmi_bus.h +5 -7

index 1672b05..d4cfc85 100644
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2013 Synaptics Incorporated
+ * Copyright (c) 2011-2014 Synaptics Incorporated
  * Copyright (c) 2011 Unixphere
  *
  * This program is free software; you can redistribute it and/or modify it

@@ -111,9 +111,8 @@ void rmi_unregister_function_handler(struct rmi_function_handler *);
  * @driver: Device driver model driver
  * @irq_handler: Callback for handling irqs
  * @reset_handler: Called when a reset is detected.
- * @get_func_irq_mask: Callback for calculating interrupt mask
- * @store_irq_mask: Callback for storing and replacing interrupt mask
- * @restore_irq_mask: Callback for restoring previously stored interrupt mask
+ * @clear_irq_bits: Clear the specified bits in the current interrupt mask.
+ * @set_irq_bist: Set the specified bits in the current interrupt mask.
  * @store_productid: Callback for cache product id from function 01
  * @data: Private data pointer
  *

@@ -123,9 +122,8 @@ struct rmi_driver {
 
 	int (*irq_handler)(struct rmi_device *rmi_dev, int irq);
 	int (*reset_handler)(struct rmi_device *rmi_dev);
-	int (*store_irq_mask)(struct rmi_device *rmi_dev,
-				unsigned long *new_interupts);
-	int (*restore_irq_mask)(struct rmi_device *rmi_dev);
+	int (*clear_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
+	int (*set_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
 	int (*store_productid)(struct rmi_device *rmi_dev);
 	int (*set_input_params)(struct rmi_device *rmi_dev,
 			struct input_dev *input);

drivers/input/rmi4/rmi_driver.c +42 -62

index 4406a7f..2172c80 100644
@@ -330,78 +330,56 @@ static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
 	return 0;
 }
 
-/**
- * This pair of functions allows functions like function 54 to request to have
- * other interrupts disabled until the restore function is called. Only one
- * store happens at a time.
- */
-static int rmi_driver_irq_save(struct rmi_device *rmi_dev,
-				unsigned long *new_ints)
+static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
+				   unsigned long *mask)
 {
-	int retval = 0;
+	int error = 0;
 	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	struct device *dev = &rmi_dev->dev;
 
 	mutex_lock(&data->irq_mutex);
-	if (!data->irq_stored) {
-		/* Save current enabled interrupts */
-		retval = rmi_read_block(rmi_dev,
-				data->f01_container->fd.control_base_addr + 1,
-				data->irq_mask_store, data->num_of_irq_regs);
-		if (retval < 0) {
-			dev_err(dev, "%s: Failed to read enabled interrupts!",
-								__func__);
-			goto error_unlock;
-		}
-		retval = rmi_write_block(rmi_dev,
-				data->f01_container->fd.control_base_addr + 1,
-				new_ints, data->num_of_irq_regs);
-		if (retval < 0) {
-			dev_err(dev, "%s: Failed to change enabled interrupts!",
-								__func__);
-			goto error_unlock;
-		}
-		bitmap_copy(data->current_irq_mask, new_ints, data->irq_count);
-		data->irq_stored = true;
-	} else {
-		retval = -ENOSPC; /* No space to store IRQs.*/
-		dev_err(dev, "Attempted to save IRQs when already stored!");
+	bitmap_or(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
 	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
 
 error_unlock:
 	mutex_unlock(&data->irq_mutex);
-	return retval;
+	return error;
 }
 
-static int rmi_driver_irq_restore(struct rmi_device *rmi_dev)
+static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
+				     unsigned long *mask)
 {
-	int retval = 0;
+	int error = 0;
 	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	struct device *dev = &rmi_dev->dev;
 
 	mutex_lock(&data->irq_mutex);
-
-	if (data->irq_stored) {
-		retval = rmi_write_block(rmi_dev,
-				data->f01_container->fd.control_base_addr+1,
-				data->irq_mask_store, data->num_of_irq_regs);
-		if (retval < 0) {
-			dev_err(dev, "%s: Failed to write enabled interupts!",
-								__func__);
-			goto error_unlock;
-		}
-		memcpy(data->current_irq_mask, data->irq_mask_store,
-					data->num_of_irq_regs * sizeof(u8));
-		data->irq_stored = false;
-	} else {
-		retval = -EINVAL;
-		dev_err(dev, "%s: Attempted to restore values when not stored!",
-			__func__);
+	bitmap_andnot(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
 	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
 
 error_unlock:
 	mutex_unlock(&data->irq_mutex);
-	return retval;
+	return error;
 }
 
 static int rmi_driver_irq_handler(struct rmi_device *rmi_dev, int irq)

@@ -437,21 +415,23 @@ static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
 		return 0;
 	}
 
+	error = rmi_read_block(rmi_dev,
+			       data->f01_container->fd.control_base_addr + 1,
+			       data->current_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		return error;
+	}
+
 	error = rmi_driver_process_reset_requests(rmi_dev);
 	if (error < 0)
 		return error;
 
-
 	error = rmi_driver_process_config_requests(rmi_dev);
 	if (error < 0)
 		return error;
 
-	if (data->irq_stored) {
-		error = rmi_driver_irq_restore(rmi_dev);
-		if (error < 0)
-			return error;
-	}
-
 	return 0;
 }
 

@@ -846,7 +826,7 @@ static int rmi_driver_probe(struct device *dev)
 	data->irq_status	= irq_memory + size * 0;
 	data->fn_irq_bits	= irq_memory + size * 1;
 	data->current_irq_mask	= irq_memory + size * 2;
-	data->irq_mask_store	= irq_memory + size * 3;
+	data->new_irq_mask	= irq_memory + size * 3;
 
 	irq_count = 0;
 	dev_dbg(dev, "Creating functions.");

@@ -957,8 +937,8 @@ static struct rmi_driver rmi_physical_driver = {
 	},
 	.irq_handler = rmi_driver_irq_handler,
 	.reset_handler = rmi_driver_reset_handler,
-	.store_irq_mask = rmi_driver_irq_save,
-	.restore_irq_mask = rmi_driver_irq_restore,
+	.clear_irq_bits = rmi_driver_clear_irq_bits,
+	.set_irq_bits = rmi_driver_set_irq_bits,
 	.set_input_params = rmi_driver_set_input_params,
 };
 

drivers/input/rmi4/rmi_driver.h +1 -2

index a22a4e6..34f7a7d 100644
@@ -47,8 +47,7 @@ struct rmi_driver_data {
 	unsigned long *irq_status;
 	unsigned long *fn_irq_bits;
 	unsigned long *current_irq_mask;
-	unsigned long *irq_mask_store;
-	bool irq_stored;
+	unsigned long *new_irq_mask;
 	struct mutex irq_mutex;
 
 	/* Following are used when polling. */