regulator: bcm590xx: Make the modalias matches the driver name

PATCH Applied Axel Lin 3 participants 8 messages Mar 14, 2014 – Mar 21, 2014 Voltage and current regulator framework

lore

Share & tools

lore

Axel Lin

author

2014-03-14 01:58 UTC #0 lore raw

PATCH 1/3 regulator: bcm590xx: Make the modalias matches the driver name

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/bcm590xx-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/regulator/bcm590xx-regulator.c +1 -1

index e6b2e8e..d12d6d6 100644
@@ -410,4 +410,4 @@ module_platform_driver(bcm590xx_regulator_driver);
 MODULE_AUTHOR("Matt Porter <[email protected]>");
 MODULE_DESCRIPTION("BCM590xx voltage regulator driver");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bcm590xx-regulator");
+MODULE_ALIAS("platform:bcm590xx-vregs");

Signature · 1 line

1.8.1.2

Axel Lin

author

2014-03-14 01:59 UTC #1 lore raw

PATCH 2/3 regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg

The **rdev of 'struct bcm590xx_reg' isn't used anywhere in the driver so remove it.

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/bcm590xx-regulator.c | 10 ----------
 1 file changed, 10 deletions(-)

drivers/regulator/bcm590xx-regulator.c +0 ~~-10~~

index d12d6d6..ab08ca7 100644
@@ -153,7 +153,6 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 struct bcm590xx_reg {
 	struct regulator_desc *desc;
 	struct bcm590xx *mfd;
-	struct regulator_dev **rdev;
 	struct bcm590xx_info **info;
 };

@@ -334,13 +333,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	pmu->rdev = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct regulator_dev *), GFP_KERNEL);
-	if (!pmu->rdev) {
-		dev_err(&pdev->dev, "Memory alloc fails for rdev\n");
-		return -ENOMEM;
-	}
-
 	info = bcm590xx_regs;
 
 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {

@@ -391,8 +383,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 				pdev->name);
 			return PTR_ERR(rdev);
 		}
-
-		pmu->rdev[i] = rdev;
 	}
 
 	return 0;

Signature · 1 line

1.8.1.2

Matt Porter

Acked-by on v1 2/3

2014-03-20 15:21 UTC #2 lore raw

Re: [PATCH 2/3] regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg

Quoted 7 lines · Axel Lin

The **rdev of 'struct bcm590xx_reg' isn't used anywhere in the driver so remove it.
Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/bcm590xx-regulator.c | 10 ----------
 1 file changed, 10 deletions(-)

Looks good, thanks for catching this.

Acked-by Matt Porter <[email protected]>

Quoted 41 lines

drivers/regulator/bcm590xx-regulator.c +0 ~~-10~~

index d12d6d6..ab08ca7 100644
@@ -153,7 +153,6 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 struct bcm590xx_reg {
 	struct regulator_desc *desc;
 	struct bcm590xx *mfd;
-	struct regulator_dev **rdev;
 	struct bcm590xx_info **info;
 };

@@ -334,13 +333,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	pmu->rdev = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct regulator_dev *), GFP_KERNEL);
-	if (!pmu->rdev) {
-		dev_err(&pdev->dev, "Memory alloc fails for rdev\n");
-		return -ENOMEM;
-	}
-
 	info = bcm590xx_regs;
 
 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {

@@ -391,8 +383,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 				pdev->name);
 			return PTR_ERR(rdev);
 		}
-
-		pmu->rdev[i] = rdev;
 	}
 
 	return 0;

Signature · 1 line

1.8.1.2

Mark Brown

maintainer Applied

2014-03-21 18:10 UTC #3 lore raw

Re: [PATCH 2/3] regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg

In reply to Axel Lin

Quoted 2 lines · Axel Lin

The **rdev of 'struct bcm590xx_reg' isn't used anywhere in the driver so remove it.

Applied, thanks.

Axel Lin

author

2014-03-14 02:00 UTC #4 lore raw

PATCH 3/3 regulator: bcm590xx: Use array to save desc and *info

In reply to Axel Lin

BCM590XX_NUM_REGS is known in compile time.
Use array to save desc and *info makes the code simpler.

Signed-off-by Axel Lin <[email protected]>

---
 drivers/regulator/bcm590xx-regulator.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

drivers/regulator/bcm590xx-regulator.c +2 ~~-16~~

index ab08ca7..fe21855 100644
@@ -151,9 +151,9 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 };
 
 struct bcm590xx_reg {
-	struct regulator_desc *desc;
+	struct regulator_desc desc[BCM590XX_NUM_REGS];
 	struct bcm590xx *mfd;
-	struct bcm590xx_info **info;
+	struct bcm590xx_info *info[BCM590XX_NUM_REGS];
 };
 
 static int bcm590xx_get_vsel_register(int id)

@@ -319,20 +319,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pmu);
 
-	pmu->desc = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct regulator_desc), GFP_KERNEL);
-	if (!pmu->desc) {
-		dev_err(&pdev->dev, "Memory alloc fails for desc\n");
-		return -ENOMEM;
-	}
-
-	pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct bcm590xx_info *), GFP_KERNEL);
-	if (!pmu->info) {
-		dev_err(&pdev->dev, "Memory alloc fails for info\n");
-		return -ENOMEM;
-	}
-
 	info = bcm590xx_regs;
 
 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {

Signature · 1 line

1.8.1.2

Matt Porter

2014-03-20 15:43 UTC #5 lore raw

Re: [PATCH 3/3] regulator: bcm590xx: Use array to save desc and *info

Quoted 4 lines · Axel Lin

BCM590XX_NUM_REGS is known in compile time.
Use array to save desc and *info makes the code simpler.
Signed-off-by Axel Lin <[email protected]>

Well, ok. It was coded for dynamic allocation because I'm starting to work on BCM59054 support, which is similar but different. The actual regulators are different but, due to luck, the total number is the same between 59056 and 59054...so this can still work for the moment. However, another 590xx part does have a different number of regulators so I'm not sure this is worth doing when we know we'll go back to dynamic allocation in the future.

-Matt

Quoted 46 lines

---
 drivers/regulator/bcm590xx-regulator.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

drivers/regulator/bcm590xx-regulator.c +2 ~~-16~~

index ab08ca7..fe21855 100644
@@ -151,9 +151,9 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 };
 
 struct bcm590xx_reg {
-	struct regulator_desc *desc;
+	struct regulator_desc desc[BCM590XX_NUM_REGS];
 	struct bcm590xx *mfd;
-	struct bcm590xx_info **info;
+	struct bcm590xx_info *info[BCM590XX_NUM_REGS];
 };
 
 static int bcm590xx_get_vsel_register(int id)

@@ -319,20 +319,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pmu);
 
-	pmu->desc = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct regulator_desc), GFP_KERNEL);
-	if (!pmu->desc) {
-		dev_err(&pdev->dev, "Memory alloc fails for desc\n");
-		return -ENOMEM;
-	}
-
-	pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct bcm590xx_info *), GFP_KERNEL);
-	if (!pmu->info) {
-		dev_err(&pdev->dev, "Memory alloc fails for info\n");
-		return -ENOMEM;
-	}
-
 	info = bcm590xx_regs;
 
 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {

Signature · 1 line

1.8.1.2

Axel Lin

author

2014-03-21 00:58 UTC #6 lore raw

Re: [PATCH 3/3] regulator: bcm590xx: Use array to save desc and *info

2014-03-20 23:42 GMT+08:00 Matt Porter <[email protected]>:

Quoted 6 lines · Axel Lin

Quoted 4 lines
BCM590XX_NUM_REGS is known in compile time.
Use array to save desc and *info makes the code simpler.
Signed-off-by Axel Lin <[email protected]>

Quoted 7 lines

Well, ok. It was coded for dynamic allocation because I'm starting to work on BCM59054 support, which is similar but different. The actual regulators are different but, due to luck, the total number is the same between 59056 and 59054...so this can still work for the moment. However, another 590xx part does have a different number of regulators so I'm not sure this is worth doing when we know we'll go back to dynamic allocation in the future.

Then it' ok to keep the code as is, just drop this patch.

Regards,
Axel

Mark Brown

maintainer Applied

2014-03-21 18:09 UTC #7 lore raw

In reply to Axel Lin

Quoted 1 line · Axel Lin

Signed-off-by Axel Lin <[email protected]>

Applied, thanks.