Skip to contentSkip to conversation

Bluetooth: Enforce strict Secure Connections Only mode security

PATCH Applied Marcel Holtmann 2 participants 2 messages Mar 19, 2014

Subsystems (2)
lore
Share & tools
lore

Marcel Holtmann

author maintainer
#0 lore raw

PATCH 1/1 Bluetooth: Enforce strict Secure Connections Only mode security

In Secure Connections Only mode, it is required that Secure Connections is used for pairing and that the link key is encrypted with AES-CCM using a P-256 authenticated combination key. If this is not the case, then new connection shall be refused or existing connections shall be dropped.

---
 net/bluetooth/hci_conn.c  | 11 +++++++++++
 net/bluetooth/hci_event.c | 12 ++++++++++++
 2 files changed, 23 insertions(+)
net/bluetooth/hci_conn.c +11 -0
index b4809e473a19..d958e2dca52f 100644
@@ -781,6 +781,17 @@ int hci_conn_check_link_mode(struct hci_conn *conn)
 {
 	BT_DBG("hcon %p", conn);
 
+	/* In Secure Connections Only mode, it is required that Secure
+	 * Connections is used and the link is encrypted with AES-CCM
+	 * using a P-256 authenticated combination key.
+	 */
+	if (test_bit(HCI_SC_ONLY, &conn->hdev->flags)) {
+		if (!hci_conn_sc_enabled(conn) ||
+		    !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
+		    conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
+			return 0;
+	}
+
 	if (hci_conn_ssp_enabled(conn) && !(conn->link_mode & HCI_LM_ENCRYPT))
 		return 0;
 
net/bluetooth/hci_event.c +12 -0
index e97f1905aa5c..a6a3d32553c5 100644
@@ -2183,6 +2183,18 @@ static void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		if (!ev->status)
 			conn->state = BT_CONNECTED;
 
+		/* In Secure Connections Only mode, do not allow any
+		 * connections that are not encrypted with AES-CCM
+		 * using a P-256 authenticated combination key.
+		 */
+		if (test_bit(HCI_SC_ONLY, &hdev->dev_flags) &&
+		    (!test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
+		     conn->key_type != HCI_LK_AUTH_COMBINATION_P256)) {
+			hci_proto_connect_cfm(conn, HCI_ERROR_AUTH_FAILURE);
+			hci_conn_drop(conn);
+			goto unlock;
+		}
+
 		hci_proto_connect_cfm(conn, ev->status);
 		hci_conn_drop(conn);
 	} else
Signature · 1 line
1.8.5.3
#1 lore raw

Hi Marcel,

Quoted 10 lines · Marcel Holtmann

In Secure Connections Only mode, it is required that Secure Connections is used for pairing and that the link key is encrypted with AES-CCM using a P-256 authenticated combination key. If this is not the case, then new connection shall be refused or existing connections shall be dropped.

---
 net/bluetooth/hci_conn.c  | 11 +++++++++++
 net/bluetooth/hci_event.c | 12 ++++++++++++
 2 files changed, 23 insertions(+)

Applied to bluetooth-next. Thanks.

Johan