Skip to contentSkip to conversation

drm/i915: use __func__ instead of __FUNCTION__

PATCH In review Christoph Jaeger 3 participants 6 messages Mar 27, 2014 – Mar 28, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: use __func__ instead of __FUNCTION__

__FUNCTION__ is gcc specific; use __func__ instead.

---
 drivers/gpu/drm/i915/dvo_ns2501.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/dvo_ns2501.c +6 -9
index 954acb2..e40cd26 100644
@@ -234,7 +234,7 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 {
 	DRM_DEBUG_KMS
 	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -262,7 +262,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 	DRM_DEBUG_KMS
 	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -277,8 +277,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 800x600\n", __func__);
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +340,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 640x480\n", __func__);
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +404,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 1024x768\n", __func__);
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -459,7 +456,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	unsigned char ch;
 
 	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+		      __func__, enable);
 
 	ch = ns->reg_8_shadow;
 
Signature · 1 line
1.8.5.3
maintainer
#1 lore raw
Quoted 1 line · Christoph Jaeger

__FUNCTION__ is gcc specific; use __func__ instead.

I acknowledge the patch is correct and functionally the same as before. However the correct fix would be to drop __FUNCTION__ and the corresponding "%s: " altogether as DRM_DEBUG_KMS includes printing the function name.

BR,
Jani.

Quoted 70 lines
---
 drivers/gpu/drm/i915/dvo_ns2501.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/dvo_ns2501.c +6 -9
index 954acb2..e40cd26 100644
@@ -234,7 +234,7 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 {
 	DRM_DEBUG_KMS
 	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -262,7 +262,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 	DRM_DEBUG_KMS
 	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -277,8 +277,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 800x600\n", __func__);
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +340,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 640x480\n", __func__);
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +404,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 1024x768\n", __func__);
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -459,7 +456,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	unsigned char ch;
 
 	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+		      __func__, enable);
 
 	ch = ns->reg_8_shadow;
 
Signature · 1 line
1.8.5.3
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
#2 lore raw

Thanks for review.

This patch obsoletes patch "drm/i915: use __func__ instead of __FUNCTION__".

Best,
Chris

#3 lore raw

PATCH 1/1 drm/i915: drop __FUNCTION__ as argument to DRM_DEBUG_KMS

DRM_DEBUG_KMS includes printing the function name.

---
 drivers/gpu/drm/i915/dvo_ns2501.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/dvo_ns2501.c +8 -14
index 954acb2..ce5242f 100644
@@ -233,9 +233,8 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 					      struct drm_display_mode *mode)
 {
 	DRM_DEBUG_KMS
-	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Currently, these are all the modes I have data from.
@@ -261,9 +260,8 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 
 	DRM_DEBUG_KMS
-	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Where do I find the native resolution for which scaling is not required???
@@ -277,8 +275,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 800x600\n");
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +338,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 640x480\n");
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +402,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 1024x768\n");
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -458,8 +453,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 	unsigned char ch;
 
-	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+	DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable);
 
 	ch = ns->reg_8_shadow;
 
Signature · 1 line
1.8.5.3
maintainer Reviewed-by on v1 1/1
#4 lore raw

Re: [PATCH] drm/i915: drop __FUNCTION__ as argument to DRM_DEBUG_KMS

Quoted 3 lines · Christoph Jaeger

DRM_DEBUG_KMS includes printing the function name.

Quoted 75 lines
---
 drivers/gpu/drm/i915/dvo_ns2501.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/dvo_ns2501.c +8 -14
index 954acb2..ce5242f 100644
@@ -233,9 +233,8 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 					      struct drm_display_mode *mode)
 {
 	DRM_DEBUG_KMS
-	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Currently, these are all the modes I have data from.
@@ -261,9 +260,8 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 
 	DRM_DEBUG_KMS
-	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Where do I find the native resolution for which scaling is not required???
@@ -277,8 +275,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 800x600\n");
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +338,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 640x480\n");
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +402,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 1024x768\n");
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -458,8 +453,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 	unsigned char ch;
 
-	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+	DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable);
 
 	ch = ns->reg_8_shadow;
 
Signature · 1 line
1.8.5.3
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
#5 lore raw

Re: [PATCH] drm/i915: drop __FUNCTION__ as argument to DRM_DEBUG_KMS

Quoted 6 lines · Jani Nikula
Quoted 3 lines · Christoph Jaeger

DRM_DEBUG_KMS includes printing the function name.

Queued for -next, thanks for the patch.
-Daniel

Quoted 80 lines
Quoted 77 lines

---
 drivers/gpu/drm/i915/dvo_ns2501.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
drivers/gpu/drm/i915/dvo_ns2501.c +8 -14
index 954acb2..ce5242f 100644
@@ -233,9 +233,8 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 					      struct drm_display_mode *mode)
 {
 	DRM_DEBUG_KMS
-	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Currently, these are all the modes I have data from.
@@ -261,9 +260,8 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 
 	DRM_DEBUG_KMS
-	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
-	     mode->vtotal);
+	    ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
+	     mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal);
 
 	/*
 	 * Where do I find the native resolution for which scaling is not required???
@@ -277,8 +275,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 800x600\n");
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +338,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 640x480\n");
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +402,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("switching to 1024x768\n");
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -458,8 +453,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv);
 	unsigned char ch;
 
-	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+	DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable);
 
 	ch = ns->reg_8_shadow;
 
Signature · 1 line
1.8.5.3
Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch