poky/yocto-bsps: 3.4, 3.8, 3.10 and 3.14 updates

index a68a6a1416b8..c5767250d324 100644
@@ -19,13 +19,13 @@ POKY_DEFAULT_EXTRA_RRECOMMENDS = "kernel-module-af-packet"
 
 DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} ${DISTRO_FEATURES_LIBC} ${POKY_DEFAULT_DISTRO_FEATURES}"
 
-PREFERRED_VERSION_linux-yocto ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemux86 ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemux86-64 ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemuarm ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemumips ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemumips64 ?= "3.10%"
-PREFERRED_VERSION_linux-yocto_qemuppc ?= "3.10%"
+PREFERRED_VERSION_linux-yocto ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemux86 ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemux86-64 ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemuarm ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemumips ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemumips64 ?= "3.14%"
+PREFERRED_VERSION_linux-yocto_qemuppc ?= "3.14%"
 
 SDK_NAME = "${DISTRO}-${TCLIBC}-${SDK_ARCH}-${IMAGE_BASENAME}-${TUNE_PKGARCH}"
 SDKPATH = "/opt/${DISTRO}/${SDK_VERSION}"

index 56f566de4fc8..c91389c959c8 100644
@@ -7,11 +7,11 @@ KBRANCH_beagleboard = "standard/beagleboard"
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 
-SRCREV_machine_genericx86 ?= "a86e2b1eadd1f607d0d6ac5c4ab20a902714ddb1"
-SRCREV_machine_genericx86-64 ?= "a86e2b1eadd1f607d0d6ac5c4ab20a902714ddb1"
-SRCREV_machine_routerstationpro ?= "e2c76467906116a42a020ed0c76a06af720e5cf1"
-SRCREV_machine_mpc8315e-rdb ?= "1ac2906d6d672f33e36c5add9b7d0e6277e34aaf"
-SRCREV_machine_beagleboard ?= "e231c6220163d3c2a41cb380e1f759e8b222303c"
+SRCREV_machine_genericx86 ?= "2ee37bfe732c73f7d39af55875ce8d30b282471c"
+SRCREV_machine_genericx86-64 ?= "2ee37bfe732c73f7d39af55875ce8d30b282471c"
+SRCREV_machine_routerstationpro ?= "628fb65e665a4179b6df049563f47f521f9dfb4e"
+SRCREV_machine_mpc8315e-rdb ?= "2688f74bf2bb01ec355bbdd4b6fa00a0d39302de"
+SRCREV_machine_beagleboard ?= "dd12d784a00583766a77f6f027e0872797b9dc37"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"

new file mode 100644
index 000000000000..f3ea33bb0d6b
@@ -0,0 +1,21 @@
+#@TYPE: Machine
+#@NAME: Edgerouter
+#@DESCRIPTION: Edgerouter
+
+require conf/machine/include/tune-mips64.inc
+
+MACHINE_FEATURES = "pci ext2 ext3 serial"
+
+KERNEL_IMAGETYPE = "vmlinux"
+KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
+KERNEL_IMAGE_STRIP_EXTRA_SECTIONS  = ".comment"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto-dev"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+USE_VT ?= "0"
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+
+IMAGE_FSTYPES ?= "jffs2 tar.bz2"
+JFFS2_ERASEBLOCK = "0x10000"

index f3ea33bb0d6b..c5e490f824ea 100644
@@ -11,6 +11,7 @@ KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
 KERNEL_IMAGE_STRIP_EXTRA_SECTIONS  = ".comment"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto-dev"
+PREFERRED_VERSION_linux-yocto ?= "3.10%"
 
 SERIAL_CONSOLE = "115200 ttyS0"
 USE_VT ?= "0"

index 607062b59ada..eccc7d3e6e76 100644
@@ -492,3 +492,84 @@ manually, you can automate the boot process with a boot script.
   ... Program from 0x87ff0000-0x88000000 at 0xbfff0000: .
 4) Power cycle the board.
 
+EdgeRouter Lite(edgerouter)
+=====================================
+
+The EdgeRouter Lite is part of the EdgeMax series. It is an MIPS64 router(Cavium Octeon)
+with 512MB of RAM, which uses a USB pendrive for storage.
+
+Setup instructions
+------------------
+
+You will need the following:
+* NFS root setup on your workstation
+* TFTP server installed on your workstation
+* Straight-thru 9-conductor serial cable (DB9, M/F) connected from your 
+  PC to UART1
+* Ethernet connected to the first ethernet port on the board
+
+--- Preparation ---
+
+Build an image (e.g. core-image-minimal) using "edgerouter" as the MACHINE.
+In the following instruction it is based on core-image-minimal. Another target
+may be similiar with it.
+
+--- Booting from NFS root ---
+
+Load the kernel, and boot the system as follows:
+
+ 1. Get the kernel (vmlinux) file from the tmp/deploy/images/edgerouter
+    directory, and make them available on your TFTP server.
+
+ 2. Connect the board's first serial port to your workstation and then start up
+    your favourite serial terminal so that you will be able to interact with
+    the serial console. If you don't have a favourite, picocom is suggested:
+
+  $ picocom /dev/ttyS0 -b 115200
+
+ 3. Power up or reset the board and press a key on the terminal when prompted
+    to get to the U-Boot command line
+
+ 4. Set up the environment in U-Boot:
+
+ => setenv ipaddr <board ip>
+ => setenv serverip <tftp server ip>
+
+ 5. Download the kernel and boot:
+
+ => tftp tftp $loadaddr vmlinux
+ => bootoctlinux $loadaddr coremask=0x3 root=/dev/nfs rw nfsroot=<nfsroot ip>:<rootfs path> ip=<board ip>:<server ip>:<gateway ip>:<netmask>:edgerouter:eth0:off mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
+
+--- Booting from USB root ---
+
+NOTE: Since the USB disk is inside the edgerouter box, its inconvenient for us to
+      plug and unplug the USB disk. So in the following instructions I assume that
+	  you already boot the box from NFS. Additionally, since vmlinux is not installed
+	  to core-minal-image-xxx by default, so its neccessary for us to copy it to USB
+	  disk.
+
+Load the kernel, and boot the system as follows:
+ 1. Booting from NFS root
+
+ 2. Mount usb disk partition 2 and then extract the contens of
+    tmp/deploy/core-image-XXXX.tar.bz2 into it.
+
+    Before starting, copy core-image-minimal-xxx.tar.bz2 and vmlinux into
+    rootfs path on your workstation.
+
+    and then,
+  
+    # mount /dev/sda2 /media/sda2
+    # tar -xvjpf core-image-minimal-XXX.tar.bz2 -C /media/sda2
+    # cp vmlinux /media/sda2/boot/vmlinux
+    # umount /media/sda2
+    # reboot
+
+ 3. Reboot the board and press a key on the terminal when prompted to get to the U-Boot
+    command line
+    # reboot
+
+ 4. Load the kernel and boot:
+
+ => ext2load usb 0:2 $loadaddr boot/vmlinux
+ => bootoctlinux $loadaddr coremask=0x3 root=/dev/sda2 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)

deleted file mode 100644
index 216b384a4334..000000000000
@@ -1,19 +0,0 @@
-KBRANCH_genericx86  = "standard/common-pc/base"
-KBRANCH_routerstationpro = "standard/routerstationpro"
-KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
-KBRANCH_beagleboard = "standard/beagleboard"
-
-SRCREV_machine_genericx86 ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
-SRCREV_machine_routerstationpro ?= "4a94f39d429fa284ce69b13bb635b29b1319e372"
-SRCREV_machine_mpc8315e-rdb ?= "f467c72937de0e4a2a66e21b9855c4aee844f936"
-SRCREV_machine_beagleboard ?= "f20047520a57322f05d95a18a5fbd082fb15cb87"
-
-COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
-COMPATIBLE_MACHINE_routerstationpro = "routerstationpro"
-COMPATIBLE_MACHINE_beagleboard = "beagleboard"
-COMPATIBLE_MACHINE_genericx86 = "genericx86"
-
-# routerstationpro has a flash size of 16mb
-KERNEL_IMAGE_MAXSIZE_routerstationpro = "16777216"
-
-KMACHINE_genericx86 = "common-pc"