ASoC: rt5640: Remove the pre-allocated size of reg_default
Subsystems (3)
Oder Chiou
maintainerPATCH 1/6 ASoC: rt5640: Remove the pre-allocated size of reg_default
In order to prevent the redundant memory usage, the pre-allocated size of reg_default should be remove.
--- sound/soc/codecs/rt5640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt5640.c +1 -1
@@ -59,7 +59,7 @@ static struct reg_default init_list[] = { };#define RT5640_INIT_REG_LEN ARRAY_SIZE(init_list) -static const struct reg_default rt5640_reg[RT5640_VENDOR_ID2 +1 ] = { +static const struct reg_default rt5640_reg[] = { {0x00 ,0x000e }, {0x01 ,0xc8c8 }, {0x02 ,0xc8c8 },
Signature · 1 line
1.8.1.1.439.g50a6b54
Oder Chiou
maintainerPATCH 2/6 ASoC: rt5640: Rename the function of clock checking
In order to identify clearly, the patch renames the function "check_sysclk1_source" to "is_sys_clk_from_pll".
--- sound/soc/codecs/rt5640.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
sound/soc/codecs/rt5640.c +9 -9
@@ -480,7 +480,7 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w,return idx; } -static int check_sysclk1_source (struct snd_soc_dapm_widget *source, +static int is_sys_clk_from_pll (struct snd_soc_dapm_widget *source,struct snd_soc_dapm_widget *sink) {unsigned int val;
@@ -1273,22 +1273,22 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"Stereo ADC MIXL", "ADC1 Switch", "Stereo ADC L1 Mux"}, {"Stereo ADC MIXL", "ADC2 Switch", "Stereo ADC L2 Mux"}, {"Stereo ADC MIXL", NULL, "Stereo Filter"}, - {"Stereo Filter", NULL, "PLL1", check_sysclk1_source}, + {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll}, {"Stereo ADC MIXR", "ADC1 Switch", "Stereo ADC R1 Mux"}, {"Stereo ADC MIXR", "ADC2 Switch", "Stereo ADC R2 Mux"}, {"Stereo ADC MIXR", NULL, "Stereo Filter"}, - {"Stereo Filter", NULL, "PLL1", check_sysclk1_source}, + {"Stereo Filter", NULL, "PLL1", is_sys_clk_from_pll}, {"Mono ADC MIXL", "ADC1 Switch", "Mono ADC L1 Mux"}, {"Mono ADC MIXL", "ADC2 Switch", "Mono ADC L2 Mux"}, {"Mono ADC MIXL", NULL, "Mono Left Filter"}, - {"Mono Left Filter", NULL, "PLL1", check_sysclk1_source}, + {"Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll}, {"Mono ADC MIXR", "ADC1 Switch", "Mono ADC R1 Mux"}, {"Mono ADC MIXR", "ADC2 Switch", "Mono ADC R2 Mux"}, {"Mono ADC MIXR", NULL, "Mono Right Filter"}, - {"Mono Right Filter", NULL, "PLL1", check_sysclk1_source}, + {"Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll}, {"IF2 ADC L", NULL, "Mono ADC MIXL"}, {"IF2 ADC R", NULL, "Mono ADC MIXR"},
@@ -1377,13 +1377,13 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"DIG MIXR", "DAC R2 Switch", "DAC R2 Mux"}, {"DAC L1", NULL, "Stereo DAC MIXL"}, - {"DAC L1", NULL, "PLL1", check_sysclk1_source}, + {"DAC L1", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC R1", NULL, "Stereo DAC MIXR"}, - {"DAC R1", NULL, "PLL1", check_sysclk1_source}, + {"DAC R1", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC L2", NULL, "Mono DAC MIXL"}, - {"DAC L2", NULL, "PLL1", check_sysclk1_source}, + {"DAC L2", NULL, "PLL1", is_sys_clk_from_pll}, {"DAC R2", NULL, "Mono DAC MIXR"}, - {"DAC R2", NULL, "PLL1", check_sysclk1_source}, + {"DAC R2", NULL, "PLL1", is_sys_clk_from_pll}, {"SPK MIXL", "REC MIXL Switch", "RECMIXL"}, {"SPK MIXL", "INL Switch", "INL VOL"},
Signature · 1 line
1.8.1.1.439.g50a6b54
Re: [PATCH 2/6] ASoC: rt5640: Rename the function of clock checking
Quoted 2 lines · Oder Chiou
In order to identify clearly, the patch renames the function "
check_sysclk1_source" to "is_sys_clk_from_pll".
Applied, thanks.
Oder Chiou
maintainerPATCH 3/6 ASoC: rt5640: Remove the unused or incorrect setting of clock source
In reply to Oder ChiouThe patch removes the unused or incorrect setting of clock source.
--- sound/soc/codecs/rt5640.c | 8 +------- sound/soc/codecs/rt5640.h | 2 -- 2 files changed, 1 insertion(+), 9 deletions(-)
sound/soc/codecs/rt5640.c +1 -7
@@ -487,7 +487,7 @@ static int is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, val =snd_soc_read (source->codec,RT5640_GLB_CLK ); val &=RT5640_SCLK_SRC_MASK ; -if (val ==RT5640_SCLK_SRC_PLL1 || val ==RT5640_SCLK_SRC_PLL1T ) +if (val ==RT5640_SCLK_SRC_PLL1 )return 1 ;else return 0 ;
@@ -1694,12 +1694,6 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai,case RT5640_SCLK_S_PLL1 : reg_val |=RT5640_SCLK_SRC_PLL1 ;break ; -case RT5640_SCLK_S_PLL1_TK : - reg_val |=RT5640_SCLK_SRC_PLL1T ; -break ; -case RT5640_SCLK_S_RCCLK : - reg_val |=RT5640_SCLK_SRC_RCCLK ; -break ;default :dev_err (codec->dev,"Invalid clock id (%d)\n" , clk_id);return -EINVAL ;
sound/soc/codecs/rt5640.h +0 -2
@@ -976,8 +976,6 @@#define RT5640_SCLK_SRC_SFT 14#define RT5640_SCLK_SRC_MCLK (0x0 << 14)#define RT5640_SCLK_SRC_PLL1 (0x1 << 14) -#define RT5640_SCLK_SRC_PLL1T (0x2 << 14) -#define RT5640_SCLK_SRC_RCCLK (0x3 << 14)/* 15MHz */ #define RT5640_PLL1_SRC_MASK (0x3 << 12)#define RT5640_PLL1_SRC_SFT 12#define RT5640_PLL1_SRC_MCLK (0x0 << 12)
Signature · 1 line
1.8.1.1.439.g50a6b54
Re: [PATCH 3/6] ASoC: rt5640: Remove the unused or incorrect setting of clock source
Quoted 1 line · Oder Chiou
The patch removes the unused or incorrect setting of clock source.
Applied, thanks.
Oder Chiou
maintainerPATCH 4/6 ASoC: rt5640: Remove the unused field in private data
In reply to Oder ChiouThe patch removes the unused field in private data.
--- sound/soc/codecs/rt5640.h | 1 - 1 file changed, 1 deletion(-)
sound/soc/codecs/rt5640.h +0 -1
@@ -2095,7 +2095,6 @@ struct rt5640_priv {int pll_in;int pll_out; -int dmic_en;bool hp_mute; };
Signature · 1 line
1.8.1.1.439.g50a6b54
Re: [PATCH 4/6] ASoC: rt5640: Remove the unused field in private data
Quoted 1 line · Oder Chiou
The patch removes the unused field in private data.
Applied, thanks.
Oder Chiou
maintainerPATCH 5/6 ASoC: rt5640: Remove the unnecessary parentheses
In reply to Oder ChiouThe patch removes the unnecessary parentheses.
--- sound/soc/codecs/rt5640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt5640.c +1 -1
@@ -2102,7 +2102,7 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, }regmap_read (rt5640->regmap,RT5640_VENDOR_ID2 , &val); -if ((val !=RT5640_DEVICE_ID )) { +if (val !=RT5640_DEVICE_ID ) {dev_err (&i2c->dev,"Device with ID register %x is not rt5640/39\n" , val);return -ENODEV ;
Signature · 1 line
1.8.1.1.439.g50a6b54
Re: [PATCH 5/6] ASoC: rt5640: Remove the unnecessary parentheses
Quoted 1 line · Oder Chiou
The patch removes the unnecessary parentheses.
Applied, thanks.
Oder Chiou
maintainerPATCH 6/6 ASoC: rt5640: Change the setting method of idle_bias_off
In reply to Oder ChiouThe patch moves the idle_bias_off setting to struct "soc_codec_dev_rt5640".
--- sound/soc/codecs/rt5640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt5640.c +1 -1
@@ -1879,7 +1879,6 @@ static int rt5640_probe(struct snd_soc_codec *codec) rt5640->codec = codec; - codec->dapm.idle_bias_off =1 ;rt5640_set_bias_level (codec,SND_SOC_BIAS_OFF );snd_soc_update_bits (codec,RT5640_DUMMY1 ,0x0301 ,0x0301 );
@@ -1988,6 +1987,7 @@ static struct snd_soc_codec_driver soc_codec_dev_rt5640 = { .suspend = rt5640_suspend, .resume = rt5640_resume, .set_bias_level = rt5640_set_bias_level, + .idle_bias_off = true, .controls = rt5640_snd_controls, .num_controls = ARRAY_SIZE(rt5640_snd_controls), .dapm_widgets = rt5640_dapm_widgets,
Signature · 1 line
1.8.1.1.439.g50a6b54
Mark Brown
maintainerRe: [PATCH 6/6] ASoC: rt5640: Change the setting method of idle_bias_off
Quoted 1 line · Oder Chiou
The patch moves the
idle_bias_offsetting to struct "soc_codec_dev_rt5640".
This doesn't seem to apply against current code, can you please check and resend?
Oder Chiou
maintainerRe: [PATCH 6/6] ASoC: rt5640: Change the setting methodofidle_bias_off
Quoted 11 lines
-----Original Message-----
From: Mark Brown [mailto:[email protected]]
Sent: Friday, March 28, 2014 8:54 PM
To: Oder Chiou
Cc: [email protected]; [email protected]; Bard Liao; Flove
Subject: Re: [PATCH 6/6] ASoC: rt5640: Change the setting methodofidle_bias_offQuoted 1 line · Oder Chiou
The patch moves the
idle_bias_offsetting to struct "soc_codec_dev_rt5640".This doesn't seem to apply against current code, can you please check and resend?
I've resent it, thank you.
Quoted 2 lines · Oder Chiou
In order to prevent the redundant memory usage, the pre-allocated size of
reg_defaultshould be remove.
Applied, thanks.