Skip to contentSkip to conversation

bdrv_open() fixes

PATCH In review Kevin Wolf 2 participants 10 messages Apr 4, 2014

lore
Share & tools
lore

Kevin Wolf

author
#0 lore raw

cover bdrv_open() fixes

Kevin Wolf (3):
block: Don't parse 'filename' option
qemu-iotests: Remove CR line endings in reference output
block: Fix snapshot=on for protocol parsed from filename

 block.c                    | 152 +++++++++++++++++++++++----------------------
 include/block/block.h      |   1 +
 tests/qemu-iotests/051     |   6 ++
 tests/qemu-iotests/051.out |  35 +++++++++--
 4 files changed, 115 insertions(+), 79 deletions(-)
Signature · 1 line
1.8.3.1
author
#1 lore raw

PATCH 1/3 block: Don't parse 'filename' option

When using the QDict option 'filename', it is supposed to be interpreted literally. The code did correctly avoid guessing the protocol from any string before the first colon, but it still called bdrv_parse_filename() which would, for example, incorrectly remove a 'file:' prefix in the raw-posix driver.

---
 block.c                    |  8 ++++----
 tests/qemu-iotests/051     |  4 ++++
 tests/qemu-iotests/051.out | 11 +++++++++++
 3 files changed, 19 insertions(+), 4 deletions(-)
block.c +4 -4
index 7a90a1b..df2b8d1 100644
@@ -968,7 +968,7 @@ static int bdrv_file_open(BlockDriverState *bs, const char *filename,
 {
     BlockDriver *drv;
     const char *drvname;
-    bool allow_protocol_prefix = false;
+    bool parse_filename = false;
     Error *local_err = NULL;
     int ret;
 
@@ -977,7 +977,7 @@ static int bdrv_file_open(BlockDriverState *bs, const char *filename,
         filename = qdict_get_try_str(*options, "filename");
     } else if (filename && !qdict_haskey(*options, "filename")) {
         qdict_put(*options, "filename", qstring_from_str(filename));
-        allow_protocol_prefix = true;
+        parse_filename = true;
     } else {
         error_setg(errp, "Can't specify 'file' and 'filename' options at the "
                    "same time");
@@ -994,7 +994,7 @@ static int bdrv_file_open(BlockDriverState *bs, const char *filename,
         }
         qdict_del(*options, "driver");
     } else if (filename) {
-        drv = bdrv_find_protocol(filename, allow_protocol_prefix);
+        drv = bdrv_find_protocol(filename, parse_filename);
         if (!drv) {
             error_setg(errp, "Unknown protocol");
         }
@@ -1010,7 +1010,7 @@ static int bdrv_file_open(BlockDriverState *bs, const char *filename,
     }
 
     /* Parse the filename and open it */
-    if (drv->bdrv_parse_filename && filename) {
+    if (drv->bdrv_parse_filename && parse_filename) {
         drv->bdrv_parse_filename(filename, *options, &local_err);
         if (local_err) {
             error_propagate(errp, local_err);
tests/qemu-iotests/051 +4 -0
index 14694e1..2f79b26 100755
@@ -204,6 +204,10 @@ run_qemu -hda foo:bar
 run_qemu -drive file=foo:bar
 run_qemu -drive file.filename=foo:bar
 
+run_qemu -hda "file:$TEST_IMG"
+run_qemu -drive file="file:$TEST_IMG"
+run_qemu -drive file.filename="file:$TEST_IMG"
+
 echo
 echo === Snapshot mode ===
 echo
tests/qemu-iotests/051.out +11 -0
index f5e33ff..671ac5f 100644
@@ -275,6 +275,17 @@ QEMU_PROG: -drive file=foo:bar: could not open disk image foo:bar: Unknown proto
 Testing: -drive file.filename=foo:bar
 QEMU_PROG: -drive file.filename=foo:bar: could not open disk image ide0-hd0: Could not open 'foo:bar': No such file or directory
 
+Testing: -hda file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qququiquit
+
+Testing: -drive file.filename=file:TEST_DIR/t.qcow2
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: could not open disk image ide0-hd0: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+
 
 === Snapshot mode ===
 
Signature · 1 line
1.8.3.1
Reviewed-by on v1 1/3
#2 lore raw

Re: [Qemu-devel] [PATCH 1/3] block: Don't parse 'filename' option

Quoted 6 lines · Kevin Wolf

When using the QDict option 'filename', it is supposed to be interpreted literally. The code did correctly avoid guessing the protocol from any string before the first colon, but it still called bdrv_parse_filename() which would, for example, incorrectly remove a 'file:' prefix in the raw-posix driver.

Quoted 6 lines
---
  block.c                    |  8 ++++----
  tests/qemu-iotests/051     |  4 ++++
  tests/qemu-iotests/051.out | 11 +++++++++++
  3 files changed, 19 insertions(+), 4 deletions(-)
author
#3 lore raw

PATCH 2/3 qemu-iotests: Remove CR line endings in reference output

In reply to Kevin Wolf

qemu doesn't print these CRs any more. The test still didn't fail because the output comparison ignores line endings, but the change turns up each time when you want to update the output.

---
 tests/qemu-iotests/051.out | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
tests/qemu-iotests/051.out +5 -5
index 671ac5f..a631b0b 100644
@@ -44,11 +44,11 @@ QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: could not open disk image TE
 === Overriding backing file ===
 
 Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig -nodefaults
-QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
-ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
-    Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
-(qemu) qququiquit
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block
+ide0-hd0: TEST_DIR/t.qcow2 (qcow2)
+    Backing file:     TEST_DIR/t.qcow2.orig (chain depth: 1)
+(qemu) qququiquit
 
 
 === Enable and disable lazy refcounting on the command line, plus some invalid values ===
Signature · 1 line
1.8.3.1
Reviewed-by on v1 2/3
#4 lore raw

Re: [Qemu-devel] [PATCH 2/3] qemu-iotests: Remove CR line endings in reference output

Quoted 8 lines · Kevin Wolf

qemu doesn't print these CRs any more. The test still didn't fail because the output comparison ignores line endings, but the change turns up each time when you want to update the output.

---
  tests/qemu-iotests/051.out | 10 +++++-----
  1 file changed, 5 insertions(+), 5 deletions(-)

This patch doesn't work so well over email, but looking at 051.out itself, it seems correct.

author
#5 lore raw

PATCH 3/3 block: Fix snapshot=on for protocol parsed from filename

In reply to Kevin Wolf

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually.

---
 block.c                    | 144 +++++++++++++++++++++++----------------------
 include/block/block.h      |   1 +
 tests/qemu-iotests/051     |   2 +
 tests/qemu-iotests/051.out |  14 +++++
 4 files changed, 91 insertions(+), 70 deletions(-)
block.c +74 -70
index df2b8d1..7817fea 100644
@@ -1162,6 +1162,69 @@ done:
     return ret;
 }
 
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
+{
+    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
+    char tmp_filename[PATH_MAX + 1];
+
+    int64_t total_size;
+    BlockDriver *bdrv_qcow2;
+    QEMUOptionParameter *create_options;
+    QDict *snapshot_options;
+    BlockDriverState *bs_snapshot;
+    Error *local_err;
+    int ret;
+
+    /* if snapshot, we create a temporary backing file and open it
+       instead of opening 'filename' directly */
+
+    /* Get the required size from the image */
+    total_size = bdrv_getlength(bs) & BDRV_SECTOR_MASK;
+
+    /* Create the temporary image */
+    ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not get temporary filename");
+        return;
+    }
+
+    bdrv_qcow2 = bdrv_find_format("qcow2");
+    create_options = parse_option_parameters("", bdrv_qcow2->create_options,
+                                             NULL);
+
+    set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
+
+    ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
+    free_option_parameters(create_options);
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not create temporary overlay "
+                         "'%s': %s", tmp_filename,
+                         error_get_pretty(local_err));
+        error_free(local_err);
+        return;
+    }
+
+    /* Prepare a new options QDict for the temporary file */
+    snapshot_options = qdict_new();
+    qdict_put(snapshot_options, "file.driver",
+              qstring_from_str("file"));
+    qdict_put(snapshot_options, "file.filename",
+              qstring_from_str(tmp_filename));
+
+    bs_snapshot = bdrv_new("");
+    bs_snapshot->is_temporary = 1;
+
+    ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
+                    bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
+    if (ret < 0) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    bdrv_append(bs_snapshot, bs);
+    bdrv_reopen(bs_snapshot, bs_snapshot->open_flags & ~BDRV_O_RDWR, NULL);
+}
+
 /*
  * Opens a disk image (raw, qcow2, vmdk, ...)
  *
@@ -1182,8 +1245,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
               BlockDriver *drv, Error **errp)
 {
     int ret;
-    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
-    char tmp_filename[PATH_MAX + 1];
     BlockDriverState *file = NULL, *bs;
     const char *drvname;
     Error *local_err = NULL;
@@ -1243,74 +1304,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
         }
     }
 
-    /* For snapshot=on, create a temporary qcow2 overlay */
-    if (flags & BDRV_O_SNAPSHOT) {
-        BlockDriverState *bs1;
-        int64_t total_size;
-        BlockDriver *bdrv_qcow2;
-        QEMUOptionParameter *create_options;
-        QDict *snapshot_options;
-
-        /* if snapshot, we create a temporary backing file and open it
-           instead of opening 'filename' directly */
-
-        /* Get the required size from the image */
-        QINCREF(options);
-        bs1 = NULL;
-        ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
-                        drv, &local_err);
-        if (ret < 0) {
-            goto fail;
-        }
-        total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
-
-        bdrv_unref(bs1);
-
-        /* Create the temporary image */
-        ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not get temporary filename");
-            goto fail;
-        }
-
-        bdrv_qcow2 = bdrv_find_format("qcow2");
-        create_options = parse_option_parameters("", bdrv_qcow2->create_options,
-                                                 NULL);
-
-        set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
-
-        ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
-        free_option_parameters(create_options);
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not create temporary overlay "
-                             "'%s': %s", tmp_filename,
-                             error_get_pretty(local_err));
-            error_free(local_err);
-            local_err = NULL;
-            goto fail;
-        }
-
-        /* Prepare a new options QDict for the temporary file, where user
-         * options refer to the backing file */
-        if (filename) {
-            qdict_put(options, "file.filename", qstring_from_str(filename));
-        }
-        if (drv) {
-            qdict_put(options, "driver", qstring_from_str(drv->format_name));
-        }
-
-        snapshot_options = qdict_new();
-        qdict_put(snapshot_options, "backing", options);
-        qdict_flatten(snapshot_options);
-
-        bs->options = snapshot_options;
-        options = qdict_clone_shallow(bs->options);
-
-        filename = tmp_filename;
-        drv = bdrv_qcow2;
-        bs->is_temporary = 1;
-    }
-
     /* Open image file without format layer */
     if (flags & BDRV_O_RDWR) {
         flags |= BDRV_O_ALLOW_RDWR;
@@ -1372,6 +1365,17 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
         }
     }
 
+    /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
+     * temporary snapshot afterwards. */
+    if (flags & BDRV_O_SNAPSHOT) {
+        bdrv_append_temp_snapshot(bs, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            goto close_and_fail;
+        }
+    }
+
+
 done:
     /* Check if any unknown options were used */
     if (options && (qdict_size(options) != 0)) {
include/block/block.h +1 -0
index 1ed55d8..b3230a2 100644
@@ -190,6 +190,7 @@ int bdrv_open_image(BlockDriverState **pbs, const char *filename,
                     QDict *options, const char *bdref_key, int flags,
                     bool allow_none, Error **errp);
 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp);
 int bdrv_open(BlockDriverState **pbs, const char *filename,
               const char *reference, QDict *options, int flags,
               BlockDriver *drv, Error **errp);
tests/qemu-iotests/051 +2 -0
index 2f79b26..d6d926a 100755
@@ -218,6 +218,8 @@ echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG"
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
 
 $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
tests/qemu-iotests/051.out +10 -0
index a631b0b..dae0f1c 100644
@@ -319,6 +319,20 @@ wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
+Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!

rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off

Signature · 1 line
1.8.3.1
#6 lore raw

Re: [Qemu-devel] [PATCH 3/3] block: Fix snapshot=on for protocol parsed from filename

Quoted 41 lines · Kevin Wolf

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually.

---
  block.c                    | 144 +++++++++++++++++++++++----------------------
  include/block/block.h      |   1 +
  tests/qemu-iotests/051     |   2 +
  tests/qemu-iotests/051.out |  14 +++++
  4 files changed, 91 insertions(+), 70 deletions(-)
block.c +8 -0
index df2b8d1..7817fea 100644
@@ -1162,6 +1162,69 @@ done:
      return ret;
  }
 
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
+{
+    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
+    char tmp_filename[PATH_MAX + 1];
+
+    int64_t total_size;
+    BlockDriver *bdrv_qcow2;
+    QEMUOptionParameter *create_options;

block.c done: · line 1182

Quoted 10 lines
block.c +10 -0
+    QDict *snapshot_options;
+    BlockDriverState *bs_snapshot;
+    Error *local_err;
+    int ret;
+
+    /* if snapshot, we create a temporary backing file and open it
+       instead of opening 'filename' directly */
+
+    /* Get the required size from the image */
+    total_size = bdrv_getlength(bs) & BDRV_SECTOR_MASK;

bdrv_getlength() may fail.

Quoted 33 lines
block.c +33 -0
+
+    /* Create the temporary image */
+    ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not get temporary filename");
+        return;
+    }
+
+    bdrv_qcow2 = bdrv_find_format("qcow2");
+    create_options = parse_option_parameters("", bdrv_qcow2->create_options,
+                                             NULL);
+
+    set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
+
+    ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
+    free_option_parameters(create_options);
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not create temporary overlay "
+                         "'%s': %s", tmp_filename,
+                         error_get_pretty(local_err));
+        error_free(local_err);
+        return;
+    }
+
+    /* Prepare a new options QDict for the temporary file */
+    snapshot_options = qdict_new();
+    qdict_put(snapshot_options, "file.driver",
+              qstring_from_str("file"));
+    qdict_put(snapshot_options, "file.filename",
+              qstring_from_str(tmp_filename));
+
+    bs_snapshot = bdrv_new("");
+    bs_snapshot->is_temporary = 1;

block.c done: · line 1225

Quoted 10 lines
block.c +10 -0
+
+    ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
+                    bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
+    if (ret < 0) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    bdrv_append(bs_snapshot, bs);
+    bdrv_reopen(bs_snapshot, bs_snapshot->open_flags & ~BDRV_O_RDWR, NULL);

This may fail as well. I don't know how likely that is, but it might (for qcow2 at least after your patch "qcow2: Flush metadata during read-only reopen").

Quoted 137 lines
block.c +13 -70
+}
+
  /*
   * Opens a disk image (raw, qcow2, vmdk, ...)
   *
@@ -1182,8 +1245,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
                BlockDriver *drv, Error **errp)
  {
      int ret;
-    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
-    char tmp_filename[PATH_MAX + 1];
      BlockDriverState *file = NULL, *bs;
      const char *drvname;
      Error *local_err = NULL;
@@ -1243,74 +1304,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
          }
      }
 
-    /* For snapshot=on, create a temporary qcow2 overlay */
-    if (flags & BDRV_O_SNAPSHOT) {
-        BlockDriverState *bs1;
-        int64_t total_size;
-        BlockDriver *bdrv_qcow2;
-        QEMUOptionParameter *create_options;
-        QDict *snapshot_options;
-
-        /* if snapshot, we create a temporary backing file and open it
-           instead of opening 'filename' directly */
-
-        /* Get the required size from the image */
-        QINCREF(options);
-        bs1 = NULL;
-        ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
-                        drv, &local_err);
-        if (ret < 0) {
-            goto fail;
-        }
-        total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
-
-        bdrv_unref(bs1);
-
-        /* Create the temporary image */
-        ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not get temporary filename");
-            goto fail;
-        }
-
-        bdrv_qcow2 = bdrv_find_format("qcow2");
-        create_options = parse_option_parameters("", bdrv_qcow2->create_options,
-                                                 NULL);
-
-        set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
-
-        ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
-        free_option_parameters(create_options);
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not create temporary overlay "
-                             "'%s': %s", tmp_filename,
-                             error_get_pretty(local_err));
-            error_free(local_err);
-            local_err = NULL;
-            goto fail;
-        }
-
-        /* Prepare a new options QDict for the temporary file, where user
-         * options refer to the backing file */
-        if (filename) {
-            qdict_put(options, "file.filename", qstring_from_str(filename));
-        }
-        if (drv) {
-            qdict_put(options, "driver", qstring_from_str(drv->format_name));
-        }
-
-        snapshot_options = qdict_new();
-        qdict_put(snapshot_options, "backing", options);
-        qdict_flatten(snapshot_options);
-
-        bs->options = snapshot_options;
-        options = qdict_clone_shallow(bs->options);
-
-        filename = tmp_filename;
-        drv = bdrv_qcow2;
-        bs->is_temporary = 1;
-    }
-
      /* Open image file without format layer */
      if (flags & BDRV_O_RDWR) {
          flags |= BDRV_O_ALLOW_RDWR;
@@ -1372,6 +1365,17 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
          }
      }
 
+    /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
+     * temporary snapshot afterwards. */
+    if (flags & BDRV_O_SNAPSHOT) {
+        bdrv_append_temp_snapshot(bs, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            goto close_and_fail;
+        }
+    }
+
+
  done:
      /* Check if any unknown options were used */
      if (options && (qdict_size(options) != 0)) {
include/block/block.h +1 -0
index 1ed55d8..b3230a2 100644
@@ -190,6 +190,7 @@ int bdrv_open_image(BlockDriverState **pbs, const char *filename,
                      QDict *options, const char *bdref_key, int flags,
                      bool allow_none, Error **errp);
  int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp);
  int bdrv_open(BlockDriverState **pbs, const char *filename,
                const char *reference, QDict *options, int flags,
                BlockDriver *drv, Error **errp);
tests/qemu-iotests/051 +2 -0
index 2f79b26..d6d926a 100755
@@ -218,6 +218,8 @@ echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG"
  echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
  echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
  echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
 
  $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
tests/qemu-iotests/051.out +0 -0
index a631b0b..dae0f1c 100644

tests/qemu-iotests/051.out wrote 4096/4096 bytes at offset 0 · line 326

Quoted 8 lines
tests/qemu-iotests/051.out +3 -0
@@ -319,6 +319,20 @@ wrote 4096/4096 bytes at offset 0
  4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  (qemu) qququiquit
 
+Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
  qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
  rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"

The splitting if this one overly long line into three single lines gave git a hard time, but after manual fixing, it applies.

Quoted 6 lines
tests/qemu-iotests/051.out +6 -0
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information

tests/qemu-iotests/051.out wrote 4096/4096 bytes at offset 0

Quoted 10 lines
tests/qemu-iotests/051.out +5 -0
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
  qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
  rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
  read 4096/4096 bytes at offset 0
  4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off

I don't find not checking the return values too bad, as both functions are pretty unlikely to fail; normally, I'd probably give a reviewed-by, but after just having reviewed the block fix series…

Max

author
#7 lore raw

Re: [Qemu-devel] [PATCH 3/3] block: Fix snapshot=on for protocol parsed from filename

Am 04.04.2014 um 16:38 hat Max Reitz geschrieben:

Quoted 45 lines · Kevin Wolf
Quoted 44 lines

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually.

---
 block.c                    | 144 +++++++++++++++++++++++----------------------
 include/block/block.h      |   1 +
 tests/qemu-iotests/051     |   2 +
 tests/qemu-iotests/051.out |  14 +++++
 4 files changed, 91 insertions(+), 70 deletions(-)
block.c +12 -0
index df2b8d1..7817fea 100644
@@ -1162,6 +1162,69 @@ done:
     return ret;
 }
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
+{
+    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
+    char tmp_filename[PATH_MAX + 1];
+
+    int64_t total_size;
+    BlockDriver *bdrv_qcow2;
+    QEMUOptionParameter *create_options;
+    QDict *snapshot_options;
+    BlockDriverState *bs_snapshot;
+    Error *local_err;
+    int ret;
Quoted 8 lines

block.c done: · line 1182

Quoted 6 lines
block.c +6 -0
+
+    /* if snapshot, we create a temporary backing file and open it
+       instead of opening 'filename' directly */
+
+    /* Get the required size from the image */
+    total_size = bdrv_getlength(bs) & BDRV_SECTOR_MASK;

bdrv_getlength() may fail.

Aye. This is just code motion, but I'll send a follow-up patch for that.

Quoted 39 lines
Quoted 39 lines
block.c +39 -0
+
+    /* Create the temporary image */
+    ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not get temporary filename");
+        return;
+    }
+
+    bdrv_qcow2 = bdrv_find_format("qcow2");
+    create_options = parse_option_parameters("", bdrv_qcow2->create_options,
+                                             NULL);
+
+    set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
+
+    ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
+    free_option_parameters(create_options);
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not create temporary overlay "
+                         "'%s': %s", tmp_filename,
+                         error_get_pretty(local_err));
+        error_free(local_err);
+        return;
+    }
+
+    /* Prepare a new options QDict for the temporary file */
+    snapshot_options = qdict_new();
+    qdict_put(snapshot_options, "file.driver",
+              qstring_from_str("file"));
+    qdict_put(snapshot_options, "file.filename",
+              qstring_from_str(tmp_filename));
+
+    bs_snapshot = bdrv_new("");
+    bs_snapshot->is_temporary = 1;
+
+    ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
+                    bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
+    if (ret < 0) {
+        error_propagate(errp, local_err);
+        return;
Quoted 8 lines

block.c done: · line 1225

Quoted 4 lines
block.c +4 -0
+    }
+
+    bdrv_append(bs_snapshot, bs);
+    bdrv_reopen(bs_snapshot, bs_snapshot->open_flags & ~BDRV_O_RDWR, NULL);

This may fail as well. I don't know how likely that is, but it might (for qcow2 at least after your patch "qcow2: Flush metadata during read-only reopen").

Right. My v2 that fixes a real bug gets rid of this line, but otherwise checking and returning failure would indeed have made sense here. I looked at things like live commit for the reopen and there the best option was to leave the backing file just r/w if the reopen fails.

Kevin

author
#8 lore raw

PATCH v2 3/3 block: Fix snapshot=on for protocol parsed from filename

In reply to Kevin Wolf

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually.

---
v2:
- open the backing file for the temporary snapshot read-only from the beginning so that you can get an r/w block device from a read-only file using snapshot=on. Gets rid of the bdrv_reopen() whose return value was ignored in v1, too.

 block.c                    | 148 ++++++++++++++++++++++++---------------------
 include/block/block.h      |   1 +
 tests/qemu-iotests/051     |   8 +++
 tests/qemu-iotests/051.out |  28 +++++++++
 4 files changed, 115 insertions(+), 70 deletions(-)
block.c +78 -70
index df2b8d1..d89c344 100644
@@ -767,6 +767,11 @@ static int bdrv_open_flags(BlockDriverState *bs, int flags)
 {
     int open_flags = flags | BDRV_O_CACHE_WB;
 
+    /* The backing file of a temporary snapshot is read-only */
+    if (flags & BDRV_O_SNAPSHOT) {
+        open_flags &= ~BDRV_O_RDWR;
+    }
+
     /*
      * Clear flags that are internal to the block layer before opening the
      * image.
@@ -1162,6 +1167,68 @@ done:
     return ret;
 }
 
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
+{
+    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
+    char tmp_filename[PATH_MAX + 1];
+
+    int64_t total_size;
+    BlockDriver *bdrv_qcow2;
+    QEMUOptionParameter *create_options;
+    QDict *snapshot_options;
+    BlockDriverState *bs_snapshot;
+    Error *local_err;
+    int ret;
+
+    /* if snapshot, we create a temporary backing file and open it
+       instead of opening 'filename' directly */
+
+    /* Get the required size from the image */
+    total_size = bdrv_getlength(bs) & BDRV_SECTOR_MASK;
+
+    /* Create the temporary image */
+    ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not get temporary filename");
+        return;
+    }
+
+    bdrv_qcow2 = bdrv_find_format("qcow2");
+    create_options = parse_option_parameters("", bdrv_qcow2->create_options,
+                                             NULL);
+
+    set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
+
+    ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
+    free_option_parameters(create_options);
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not create temporary overlay "
+                         "'%s': %s", tmp_filename,
+                         error_get_pretty(local_err));
+        error_free(local_err);
+        return;
+    }
+
+    /* Prepare a new options QDict for the temporary file */
+    snapshot_options = qdict_new();
+    qdict_put(snapshot_options, "file.driver",
+              qstring_from_str("file"));
+    qdict_put(snapshot_options, "file.filename",
+              qstring_from_str(tmp_filename));
+
+    bs_snapshot = bdrv_new("");
+    bs_snapshot->is_temporary = 1;
+
+    ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
+                    bs->open_flags & ~BDRV_O_SNAPSHOT, bdrv_qcow2, &local_err);
+    if (ret < 0) {
+        error_propagate(errp, local_err);
+        return;
+    }
+
+    bdrv_append(bs_snapshot, bs);
+}
+
 /*
  * Opens a disk image (raw, qcow2, vmdk, ...)
  *
@@ -1182,8 +1249,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
               BlockDriver *drv, Error **errp)
 {
     int ret;
-    /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
-    char tmp_filename[PATH_MAX + 1];
     BlockDriverState *file = NULL, *bs;
     const char *drvname;
     Error *local_err = NULL;
@@ -1243,74 +1308,6 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
         }
     }
 
-    /* For snapshot=on, create a temporary qcow2 overlay */
-    if (flags & BDRV_O_SNAPSHOT) {
-        BlockDriverState *bs1;
-        int64_t total_size;
-        BlockDriver *bdrv_qcow2;
-        QEMUOptionParameter *create_options;
-        QDict *snapshot_options;
-
-        /* if snapshot, we create a temporary backing file and open it
-           instead of opening 'filename' directly */
-
-        /* Get the required size from the image */
-        QINCREF(options);
-        bs1 = NULL;
-        ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
-                        drv, &local_err);
-        if (ret < 0) {
-            goto fail;
-        }
-        total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
-
-        bdrv_unref(bs1);
-
-        /* Create the temporary image */
-        ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not get temporary filename");
-            goto fail;
-        }
-
-        bdrv_qcow2 = bdrv_find_format("qcow2");
-        create_options = parse_option_parameters("", bdrv_qcow2->create_options,
-                                                 NULL);
-
-        set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
-
-        ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
-        free_option_parameters(create_options);
-        if (ret < 0) {
-            error_setg_errno(errp, -ret, "Could not create temporary overlay "
-                             "'%s': %s", tmp_filename,
-                             error_get_pretty(local_err));
-            error_free(local_err);
-            local_err = NULL;
-            goto fail;
-        }
-
-        /* Prepare a new options QDict for the temporary file, where user
-         * options refer to the backing file */
-        if (filename) {
-            qdict_put(options, "file.filename", qstring_from_str(filename));
-        }
-        if (drv) {
-            qdict_put(options, "driver", qstring_from_str(drv->format_name));
-        }
-
-        snapshot_options = qdict_new();
-        qdict_put(snapshot_options, "backing", options);
-        qdict_flatten(snapshot_options);
-
-        bs->options = snapshot_options;
-        options = qdict_clone_shallow(bs->options);
-
-        filename = tmp_filename;
-        drv = bdrv_qcow2;
-        bs->is_temporary = 1;
-    }
-
     /* Open image file without format layer */
     if (flags & BDRV_O_RDWR) {
         flags |= BDRV_O_ALLOW_RDWR;
@@ -1372,6 +1369,17 @@ int bdrv_open(BlockDriverState **pbs, const char *filename,
         }
     }
 
+    /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
+     * temporary snapshot afterwards. */
+    if (flags & BDRV_O_SNAPSHOT) {
+        bdrv_append_temp_snapshot(bs, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            goto close_and_fail;
+        }
+    }
+
+
 done:
     /* Check if any unknown options were used */
     if (options && (qdict_size(options) != 0)) {
include/block/block.h +1 -0
index 1ed55d8..b3230a2 100644
@@ -190,6 +190,7 @@ int bdrv_open_image(BlockDriverState **pbs, const char *filename,
                     QDict *options, const char *bdref_key, int flags,
                     bool allow_none, Error **errp);
 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
+void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp);
 int bdrv_open(BlockDriverState **pbs, const char *filename,
               const char *reference, QDict *options, int flags,
               BlockDriver *drv, Error **errp);
tests/qemu-iotests/051 +8 -0
index 2f79b26..073dc7a 100755
@@ -218,6 +218,14 @@ echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG"
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on | _filter_qemu_io
 echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2 -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG" -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="file:$TEST_IMG",snapshot=on | _filter_qemu_io
+
+# Opening a read-only file r/w with snapshot=on
+chmod u-w "$TEST_IMG"
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG" -snapshot | _filter_qemu_io
+echo 'qemu-io ide0-hd0 "write -P 0x22 0 4k"' | run_qemu -drive file="$TEST_IMG",snapshot=on | _filter_qemu_io
+chmod u+w "$TEST_IMG"
 
 $QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io
 
tests/qemu-iotests/051.out +10 -0
index a631b0b..01b0384 100644
@@ -319,6 +319,34 @@ wrote 4096/4096 bytes at offset 0
 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 (qemu) qququiquit
 
+Testing: -drive file=file:TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!
 rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
 qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w!

rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2 -snapshot
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w! rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
+Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on
+QEMU X.Y.Z monitor - type 'help' for more information
+(qemu) qqeqemqemuqemu-qemu-iqemu-ioqemu-io qemu-io iqemu-io idqemu-io ideqemu-io ide0qemu-io ide0-qemu-io ide0-hqemu-io ide0-hdqemu-io ide0-hd0qemu-io ide0-hd0 qemu-io ide0-hd0 "qemu-io ide0-hd0 "wqemu-io ide0-hd0 "wrqemu-io ide0-hd0 "wri!
qemu-io ide0-hd0 "writqemu-io ide0-hd0 "writeqemu-io ide0-hd0 "write qemu-io ide0-hd0 "write -qemu-io ide0-hd0 "write -Pqemu-io ide0-hd0 "write -P qemu-io ide0-hd0 "write -P 0qemu-io ide0-hd0 "write -P 0xqemu-io ide0-hd0 "write -P 0x2qemu-io ide0-hd0 "w! rite -P 0x22qemu-io ide0-hd0 "write -P 0x22 qemu-io ide0-hd0 "write -P 0x22 0qemu-io ide0-hd0 "write -P 0x22 0 qemu-io ide0-hd0 "write -P 0x22 0 4qemu-io ide0-hd0 "write -P 0x22 0 4kqemu-io ide0-hd0 "write -P 0x22 0 4k"
+wrote 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+(qemu) qququiquit
+
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off

Signature · 1 line
1.8.3.1
Reviewed-by on v2 3/3
#9 lore raw

Re: [Qemu-devel] [PATCH v2 3/3] block: Fix snapshot=on for protocol parsed from filename

Quoted 25 lines · Kevin Wolf

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify the originally requested image as the backing file of the newly created temporary snapshot. This means that the filename is stored in "file.filename", which is an option that is not parsed for protocol names. Therefore things like -drive file=nbd:localhost:10809 were broken because it looked for a local file with the literal name 'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open the originally requested image as normal, and then do a similar operation as for live snapshots to put the temporary snapshot on top. This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor bdrv_append_temp_snapshot() out. This is a good preparation for moving its call to drive_init() and friends eventually.

---
v2:
- open the backing file for the temporary snapshot read-only from the beginning so that you can get an r/w block device from a read-only file using snapshot=on. Gets rid of the bdrv_reopen() whose return value was ignored in v1, too.

Quoted 5 lines
  block.c                    | 148 ++++++++++++++++++++++++---------------------
  include/block/block.h      |   1 +
  tests/qemu-iotests/051     |   8 +++
  tests/qemu-iotests/051.out |  28 +++++++++
  4 files changed, 115 insertions(+), 70 deletions(-)

Together with "block: Check bdrv_getlength() return value in bdrv_append_temp_snapshot()":