Skip to contentSkip to conversation

imx-common: add board_video_skip

PATCH New Eric Bénard 2 participants 16 messages Apr 4, 2014 – Apr 7, 2014

Subsystems (3)
Arm (32-bit) Arm i.MX and Layerscape Arm STM32
lore
Share & tools
lore

Eric Bénard

author
#0 lore raw

PATCH v2 1/8 imx-common: add board_video_skip

this function is shared by several boards and thus can be factorized

Signed-off-by Eric B?nard <[email protected]>
Acked-by Eric Nelson <[email protected]>
Acked-by Stefano Babic <[email protected]>

---
v2 : rename display_num to display_count as requested by Eric Nelson
keep video.h as it will also contain common video functions such as detect_hdmi so it not tied only to video_skip.

 arch/arm/imx-common/Makefile            |  1 +
 arch/arm/imx-common/video.c             | 55 +++++++++++++++++++++++++++++++++
 arch/arm/include/asm/imx-common/video.h | 20 ++++++++++++
 3 files changed, 76 insertions(+)
 create mode 100644 arch/arm/imx-common/video.c
 create mode 100644 arch/arm/include/asm/imx-common/video.h
arch/arm/imx-common/Makefile +1 -0
index 16809fe..2a7fc42 100644
@@ -19,6 +19,7 @@ obj-y	+= misc.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6))
 obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
 endif
 obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
arch/arm/imx-common/video.c new file +55 -0

55 lines not on this page · raw message

arch/arm/include/asm/imx-common/video.h new file +20 -0
new file mode 100644
index 0000000..e0c4ef4
@@ -0,0 +1,20 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __IMX_VIDEO_H_
+#define __IMX_VIDEO_H_
+
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+struct display_info_t {
+	int	bus;
+	int	addr;
+	int	pixfmt;
+	int	(*detect)(struct display_info_t const *dev);
+	void	(*enable)(struct display_info_t const *dev);
+	struct	fb_videomode mode;
+};
+
+#endif
Signature · 1 line
1.9.0
author
#1 lore raw

PATCH v2 2/8 nitrogen6x: use common board_video_skip

Signed-off-by Eric B?nard <[email protected]>
Acked-by Eric Nelson <[email protected]>

---
v2 : rename display_num to display_count as requested by Eric Nelson

 board/boundary/nitrogen6x/nitrogen6x.c | 61 ++--------------------------------
 include/configs/nitrogen6x.h           |  1 +
 2 files changed, 4 insertions(+), 58 deletions(-)
board/boundary/nitrogen6x/nitrogen6x.c +3 -58
index d9c05b0..cb5f787 100644
@@ -19,13 +19,12 @@
 #include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/sata.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <i2c.h>

@@ -446,16 +445,6 @@ static iomux_v3_cfg_t const rgb_pads[] = {
 	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
 };
 
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
-
-
 static int detect_hdmi(struct display_info_t const *dev)
 {
 	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;

@@ -492,7 +481,7 @@ static void enable_rgb(struct display_info_t const *dev)
 	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB24,

@@ -573,51 +562,7 @@ static struct display_info_t const displays[] = {{
 		.sync           = 0,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-			i = 0;
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else {
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-		}
-	} else {
-		printf("unsupported panel %s\n", panel);
-		ret = -EINVAL;
-	}
-	return (0 != ret);
-}
+size_t display_count = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
include/configs/nitrogen6x.h +1 -0
index f2db8c5..e5f1e97 100644
@@ -141,6 +141,7 @@
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
Signature · 1 line
1.9.0
#2 lore raw

PATCH v2 2/8 nitrogen6x: use common board_video_skip

Quoted 3 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>
Acked-by Eric Nelson <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#3 lore raw

PATCH v2 3/8 mx6sabresd: use common board_video_skip

In reply to Eric Bénard
Signed-off-by Eric B?nard <[email protected]>

---
v2 : rename display_num to display_count as requested by Eric Nelson

 board/freescale/mx6sabresd/mx6sabresd.c | 59 ++-------------------------------
 include/configs/mx6sabresd.h            |  1 +
 2 files changed, 4 insertions(+), 56 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +3 -56
index 12d8c56..297d20d 100644
@@ -14,14 +14,13 @@
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;

@@ -255,14 +254,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-struct display_info_t {
-	int	bus;
-	int	addr;
-	int	pixfmt;
-	int	(*detect)(struct display_info_t const *dev);
-	void	(*enable)(struct display_info_t const *dev);
-	struct	fb_videomode mode;
-};
 
 static int detect_hdmi(struct display_info_t const *dev)
 {

@@ -299,7 +290,7 @@ static void enable_lvds(struct display_info_t const *dev)
 	writel(reg, &iomux->gpr[2]);
 }
 
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB666,

@@ -340,51 +331,7 @@ static struct display_info_t const displays[] = {{
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
-
-int board_video_skip(void)
-{
-	int i;
-	int ret;
-	char const *panel = getenv("panel");
-	if (!panel) {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			struct display_info_t const *dev = displays+i;
-			if (dev->detect && dev->detect(dev)) {
-				panel = dev->mode.name;
-				printf("auto-detected panel %s\n", panel);
-				break;
-			}
-		}
-		if (!panel) {
-			panel = displays[0].mode.name;
-			printf("No panel detected: default to %s\n", panel);
-			i = 0;
-		}
-	} else {
-		for (i = 0; i < ARRAY_SIZE(displays); i++) {
-			if (!strcmp(panel, displays[i].mode.name))
-				break;
-		}
-	}
-	if (i < ARRAY_SIZE(displays)) {
-		ret = ipuv3_fb_init(&displays[i].mode, 0,
-				    displays[i].pixfmt);
-		if (!ret) {
-			displays[i].enable(displays+i);
-			printf("Display: %s (%ux%u)\n",
-			       displays[i].mode.name,
-			       displays[i].mode.xres,
-			       displays[i].mode.yres);
-		} else
-			printf("LCD %s cannot be configured: %d\n",
-			       displays[i].mode.name, ret);
-	} else {
-		printf("unsupported panel %s\n", panel);
-		return -EINVAL;
-	}
-
-	return 0;
-}
+size_t display_count = ARRAY_SIZE(displays);
 
 static void setup_display(void)
 {
include/configs/mx6sabresd.h +1 -0
index 4919f53..72ae024 100644
@@ -47,5 +47,6 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 #endif                         /* __MX6QSABRESD_CONFIG_H */
Signature · 1 line
1.9.0
#4 lore raw

PATCH v2 3/8 mx6sabresd: use common board_video_skip

Quoted 2 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#5 lore raw

PATCH v2 4/8 RiOTboard and MarSBoard: add new boards support

In reply to Eric Bénard

RiOTboard is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested :
- UART2 (console)
- eMMC
- SDCard
- uSDCard
- Ethernet
- USB Host (through 4 ports hub)
- HDMI output
- I2C 1/2/3
- LVDS TFT with LCD8000-97C from Embest/Element 14

Boot on eMMC and through USB loader are tested.

For more informations on this board : http://www.riotboard.org/

MarSBoard is produced by Embest/Element 14 and is based on i.MX6 Dual The following features are tested :
- UART2 (console)
- eMMC
- uSDCard
- Ethernet
- USB Host (through 2 ports hub)
- HDMI output
- I2C 1/2
- SPI NOR Flash
- LVDS TFT with LCD8000-97C from Embest/Element 14

Boot on SPI NOR and through USB loader are tested.

For more informations on this board :
http://www.embest-tech.com/shop/star/marsboard.html

Both boards are supported by the same code base as they are based on a common trunk of schematics.

Signed-off-by Eric B?nard <[email protected]>
Acked-by Stefano Babic <[email protected]>

---
v2 : rename display_num to display_count as requested by Eric Nelson
remove last BOARD_IS_RIOT in embestmx6boards.h which was preventing CONFIG_SUPPORT_EMMC_BOOT to be defined.

 board/embest/mx6boards/Makefile    |   9 +
 board/embest/mx6boards/mx6boards.c | 607 +++++++++++++++++++++++++++++++++++++
 boards.cfg                         |   2 +
 include/configs/embestmx6boards.h  | 336 ++++++++++++++++++++
 4 files changed, 954 insertions(+)
 create mode 100644 board/embest/mx6boards/Makefile
 create mode 100644 board/embest/mx6boards/mx6boards.c
 create mode 100644 include/configs/embestmx6boards.h
board/embest/mx6boards/Makefile new file +9 -0
new file mode 100644
index 0000000..467fb50
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := mx6boards.o
board/embest/mx6boards/mx6boards.c new file +607 -0

607 lines not on this page · raw message

boards.cfg +2 -0
index 69c8936..9804e97 100644
@@ -323,6 +323,8 @@ Active  arm         armv7          mx6         freescale       mx6sabresd
 Active  arm         armv7          mx6         freescale       mx6sabresd          mx6qsabresd                          mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q                                                           Fabio Estevam <[email protected]>
 Active  arm         armv7          mx6         freescale       mx6slevk            mx6slevk                             mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL                                                                   Fabio Estevam <[email protected]>
 Active  arm         armv7          mx6         solidrun        hummingboard        hummingboard_solo                    hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512                                                      Jon Nettleton <[email protected]>
+Active  arm         armv7          mx6         embest          mx6boards           riotboard                            embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC                              Eric B?nard <[email protected]>
+Active  arm         armv7          mx6         embest          mx6boards           marsboard                            embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,ENV_IS_IN_SPI_FLASH                          Eric B?nard <[email protected]>
 Active  arm         armv7          omap3       -               overo               omap3_overo                          -                                                                                                                                 Steve Sakoman <[email protected]>
 Active  arm         armv7          omap3       -               pandora             omap3_pandora                        -                                                                                                                                 Grazvydas Ignotas <[email protected]>
 Active  arm         armv7          omap3       8dtech          eco5pk              eco5pk                               -                                                                                                                                 Raphael Assenat <[email protected]>
include/configs/embestmx6boards.h new file +336 -0

336 lines not on this page · raw message

Signature · 1 line
1.9.0
#6 lore raw

PATCH v2 4/8 RiOTboard and MarSBoard: add new boards support

Quoted 33 lines · Eric B?nard

RiOTboard is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested :
- UART2 (console)
- eMMC
- SDCard
- uSDCard
- Ethernet
- USB Host (through 4 ports hub)
- HDMI output
- I2C 1/2/3
- LVDS TFT with LCD8000-97C from Embest/Element 14

Boot on eMMC and through USB loader are tested.

For more informations on this board : http://www.riotboard.org/

MarSBoard is produced by Embest/Element 14 and is based on i.MX6 Dual The following features are tested :
- UART2 (console)
- eMMC
- uSDCard
- Ethernet
- USB Host (through 2 ports hub)
- HDMI output
- I2C 1/2
- SPI NOR Flash
- LVDS TFT with LCD8000-97C from Embest/Element 14

Boot on SPI NOR and through USB loader are tested.

For more informations on this board :
http://www.embest-tech.com/shop/star/marsboard.html

Quoted 6 lines

Both boards are supported by the same code base as they are based on a common trunk of schematics.

Signed-off-by Eric B?nard <[email protected]>
Acked-by Stefano Babic <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#7 lore raw

PATCH v2 5/8 imx-common/video: add detect_hdmi

In reply to Eric Bénard

this function is used by several board together with board_video_skip to detect if hdmi is plugged is order to select the display to use. So move it in imx-common to share it.

Signed-off-by Eric B?nard <[email protected]>

---
v2: no change

 arch/arm/imx-common/video.c             | 10 ++++++++++
 arch/arm/include/asm/imx-common/video.h |  4 ++++
 2 files changed, 14 insertions(+)
arch/arm/imx-common/video.c +10 -0
index 098239a..0121cd7 100644
@@ -53,3 +53,13 @@ int board_video_skip(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_IMX_HDMI
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/io.h>
+int detect_hdmi(struct display_info_t const *dev)
+{
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
+}
+#endif
arch/arm/include/asm/imx-common/video.h +4 -0
index e0c4ef4..2d94850 100644
@@ -17,4 +17,8 @@ struct display_info_t {
 	struct	fb_videomode mode;
 };
 
+#ifdef CONFIG_IMX_HDMI
+extern int detect_hdmi(struct display_info_t const *dev);
+#endif
+
 #endif
Signature · 1 line
1.9.0
#8 lore raw

PATCH v2 5/8 imx-common/video: add detect_hdmi

Quoted 6 lines · Eric B?nard

this function is used by several board together with board_video_skip to detect if hdmi is plugged is order to select the display to use. So move it in imx-common to share it.

Signed-off-by Eric B?nard <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#9 lore raw

PATCH v2 6/8 nitrogen6x: use common detect_hdmi

In reply to Eric Bénard
Signed-off-by Eric B?nard <[email protected]>

---
v2: no change

 board/boundary/nitrogen6x/nitrogen6x.c | 6 ------
 1 file changed, 6 deletions(-)
board/boundary/nitrogen6x/nitrogen6x.c +0 -6
index cb5f787..8475653 100644
@@ -445,12 +445,6 @@ static iomux_v3_cfg_t const rgb_pads[] = {
 	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
 };
 
-static int detect_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
 static void do_enable_hdmi(struct display_info_t const *dev)
 {
 	imx_enable_hdmi_phy();
Signature · 1 line
1.9.0
#10 lore raw

PATCH v2 6/8 nitrogen6x: use common detect_hdmi

Quoted 2 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#11 lore raw

PATCH v2 7/8 mx6sabresd: use common detect_hdmi

In reply to Eric Bénard
Signed-off-by Eric B?nard <[email protected]>

---
v2: no change

 board/freescale/mx6sabresd/mx6sabresd.c | 8 --------
 1 file changed, 8 deletions(-)
board/freescale/mx6sabresd/mx6sabresd.c +0 -8
index 297d20d..2a1a2e8 100644
@@ -254,14 +254,6 @@ int board_phy_config(struct phy_device *phydev)
 }
 
 #if defined(CONFIG_VIDEO_IPUV3)
-
-static int detect_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
-
 static void disable_lvds(struct display_info_t const *dev)
 {
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
Signature · 1 line
1.9.0
#12 lore raw

PATCH v2 7/8 mx6sabresd: use common detect_hdmi

Quoted 2 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#13 lore raw

PATCH v2 8/8 embest/mx6boards: use common detect_hdmi

In reply to Eric Bénard
Signed-off-by Eric B?nard <[email protected]>

---
v2: no change

 board/embest/mx6boards/mx6boards.c | 6 ------
 1 file changed, 6 deletions(-)
board/embest/mx6boards/mx6boards.c +0 -6
index 6d86961..d06b57d 100644
@@ -392,12 +392,6 @@ static void disable_lvds(struct display_info_t const *dev)
 		     IOMUXC_GPR2_LVDS_CH0_MODE_MASK);
 }
 
-static int detect_hdmi(struct display_info_t const *dev)
-{
-	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
-	return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
 static void do_enable_hdmi(struct display_info_t const *dev)
 {
 	disable_lvds(dev);
Signature · 1 line
1.9.0
#14 lore raw

PATCH v2 8/8 embest/mx6boards: use common detect_hdmi

Quoted 2 lines · Eric B?nard
Signed-off-by Eric B?nard <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#15 lore raw

PATCH v2 1/8 imx-common: add board_video_skip

In reply to Eric Bénard
Quoted 6 lines · Eric B?nard

this function is shared by several boards and thus can be factorized

Signed-off-by Eric B?nard <[email protected]>
Acked-by Eric Nelson <[email protected]>
Acked-by Stefano Babic <[email protected]>

---

Applied to u-boot-imx, -next branch, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================